Help with M6348 connecting to a Cisco network

Similar Questions

• Need help with the design of a professional network and implement using Windows Server 2008.

  original title: CNS Capstone Project

  Network design and implementation. The project includes an important process of CCES in life cycle of the product as the collection of data and analysis, needs assessment, planning

  design, test strategy, documentation, etc. in fact build a network simulated by using existing equipment.

  The name of the firm co..   wide are network will connect all the sites with regional hubs. WAN will rely on a two-layer hierarchical model. locations

  LAX, DCA EGKK AND ZSPD all REGIONS will BE connect to san diego headquarters, composed of many disprate TCP/IP servers will be the only ro0uters of network protocols

  installed at each location basic WAN. Each building standardimplentaion active directory windows 2008 I re-branded, PROJECT MANAGEMENT how is that, I have a lot of project management books, but I need a Visual, I have a moment hard to read I'm more show me I learn hands on I went back to school and I am new to this can you help me graduating in March if I pass this capstone project.

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Help with E3000N connected with WAP610N and WET610N

  I have a 3000 router and a WAP610N with a WET610N.

  1. the router and AP have a different SSID?  I currently have to connect to another to get from one place to another in my house.

  2. where it has been implemented tech put the access point 2.4 GHz with range of 5 GHz in gray.  This means that the device only works with 2.4 GHz?  I thought it was a double feature of ban.  Greyed out in parahrase info information I see the button on the device and not my network password as indicated in the information of 2.4 GHz.

  3. I can not connect with my ipad on the second connection unless I use a static IP address.  The ipad does not always reminds the static configuration as well so that I have to get all this information to connect to the internet via the access point.  She shows a strong Wifi with excellent resistance but does not connect.  I noticed that he chooses an IP address that begins with 169 instead of 192 in DHCP mode.  Also, it doesn't have the address for the router, just an empty line.  I have no problems connecting to the original installation of Wifi (the one with the router).  The initial problem was the range of the E3000N.  My House is only 32 feet wide and I get a signal rooms low only 2 in the linear sense.  I tried to improve it with the WAP610N and the WET610N.  Both were suggested by technical support.  The firmware is already reflashed and changed settings on several occasions by technical support.  Any help would be appreciated.

  Thank you, Louise

  Thank you for your suggestions, but this has not worked for me.

  As soon as I changed the name of the AP for the name of the router, I had conflicts.

  I have been unable to solve it myself as I could no longer access the configuration page for the access point or bridge.

  After 2 hours with a very patient man, I am now able to use my system again.  He had to reset the two devices and the re - set.

  It seems to work as expected for the moment.  I don't have to use the static IP settings in my I - Pad.

  Thanks again for your contribution.  I appreciate the responses.

  Louise

• Need help with internet connection

  Hi I'm new to this forum, I need help. Recently I reformat my hard drive and also to recharge my windows XP OS. However, it cannot be connected to the internet. I have check and found that there is no connection of the network adapter on my laptop. I ask MS to help over the phone and was told to download the IE7 to try as I did, but my internet connection still does not work.  My router works like my other laptop is able to connect to the internet. Thank you for your help. Kind regards.

  Hello

  1 have had modifications made to your computer before the problem occurred?

  2. is it a laptop or desktop?

  3. who is the manufacturer of the computer, and what is the model number of your computer?

  4. have you installed the latest network drivers on your computer?

  5. what security program is installed on your computer (Antivirus and firewall)?

  As there is no network adapter installed on your computer, I suggest to first download and install the drivers for the network adapters on your computer manufacturer Web site and check to see if that fixes the problem on your computer.

  If the question is limited to Internet Explorer I suggest you follow the troubleshooting steps in the following article.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  http://support.Microsoft.com/kb/956196

  I hope this information helps. Please get back to us if you have any other questions on this subject.

• HP Deskjet 2540: help! Cannot connect to the home network wireless HP 2540.

  So, I'm trying to connect my new wireless printer to my home network.  Yay!  I move into the 21st century!   Not so fast, Buster!

  Here's the run down:

  I ran the installation CD, connected to a USB port when told to find my SSID, entered my password, he did his thing and then he said that I had the wrong password.  Perhaps. Ok.  Tried again with the same results.    Connected on the router (gateway of Technicolor), checked the password.  Nope, it did ' t change.  Tried again, and this time, I hit the button troubleshooting when he told me that I had the wrong password.

  I followed the guide that he d/l would be after the presentation of the error report.  Run the test of wireless network from the buttons on the printer and it says "the WPA security password configured on your HP printer is not your wireless router setting."  I assure you, expensive printer, I have not.

  Jumped on the router page configuration when you are prompted by the guide troubleshooting and ensured that MAC filtering has been set to 'allow all' which, according to the manual of the router assures me, will allow all devices to connect.  Made sure that the 2 GHz range was alive and Kickin ' and that DHCP is enabled in the IPv4 & 6 tabs.  I even reset the router as the troubleshooting guide said.  Ran the test report yet, not logged in.  It is then the troubleshooting guide abandoned and directed me here.

  But then I noticed in the manual of the printer there is a WPS function available!  WPS!  It's must be!   Pressed the button wireless to the printer for 5 seconds to put in WPS mode, press the button on the router... not good.  I noticed that on top of one of the many reports of tests wireless network there is a WPS PIN which was good for 5 minutes.  Got a new a new wireless network test report, went into the router WPS customer PIN login page, entered it... no good.  I tried again with the page, open and ready to go, just in case I took longer than 5 minutes.  Still not good.

  So I thought I would at least give the option 'WiFiDirect' to try printing.  I printed the page "Use printer wireless without a router" by pressing the direct wireless for about 5 seconds, found the printer in the WiFI networks and entered the password to 8 digits when he asked for the WPA key.  I don't remember if he said it was the wrong key or what, but now it just says: unable to connect to the network.

  All the test reports diagnostic results show the wireless on and functional.  Connectivity has not been executed, the SSID was found with no other network corresponding to my network name, with 12 other networks detected.  The settings part was not run and Security (in bold and in italics as in the report) down (in the report) since, I guess, he thinks that I have the wrong password.  Who, once more, I assure you that I am not.

  So my question is basically this: now what?

  Well, I told you a hundred times... Gateway devices are terrible for connectivity and wireless performance.   My suggestion is for connect you to put this bridge in full bridge mode device and buy a router of high quality that you have full control over and you.   I gave everything but peripheral gateway troubleshooting.

• fill a dial with a connection to the local network

  I wanted to share my internet with my itouch but I can not, I was using a verizon 3g wireless device but my phone treats it as a dial-up modem... so it wont let me fill my connection with "connecting to LAN".

  Hello

  In general, Dial-Up connection can be shared.

  Some 3G connections except do not let. You must search for and discover if your sallow configuration for sharing.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Help with printer connection

  I have an old computer HP Desktop HP Compaq dc7900.  I just bought a deskjet HP 1010 printer.  The cable from the printer I have is not compatablile with this printer.  This printer can be connected to this computer?  I'm not very good with these questions, and before I give up, I was hoping someone might be able to help me with this problem.  Should I just return printer he?  Let me know.  Thank you, PJ11397

  Dc7900 CMT (as shown here) has set (2, option 1), parallel (in option), eSATA (as an option), USB 2.0 (8), USB 2.0 internal on the map system (2), RJ45, taken audio front and back (2 of each), PS/2 ports (2), VGA connector.  The Hp1010 is USB.  All you need is a USB (as shown here) for $1.99

• How to connect to a machine that I want to help with Easy Connect? (12 digit code)

  Hello
  I need to help a laptop from a friend and it has allowed the Easy Connect feature, such that it has a 12 digit code.
  He sent me the code, but I don't know what to do with this code?
  What should I do with this code? and how can I connect to his machine?
  Can someone, please, give me a step by step tutorial showing me where I introduce this 12-digit code, and how do I connect to a machine?
  Thank you

  Read this

  http://Windows.Microsoft.com/en-us/Windows7/why-wont-Windows-Remote-Assistance-connect-when-I-click-a-contact-name

• If anyone can help with my connection laptop and projector?

  I have an old projector which I easily connected to portable precedents and to bring up the image was simple, i.e. the click function + F4, but has no effect on my new laptop Toshiba.
  Could someone tell me please how to bring the image to the top of the image with my Toshiba laptop please?

  It will be interesting to know what model of laptop you have now.
  I presume that you have not read user manuals because it's always desctibed how to pass the LCD for external device.

  On computers laptop toshiba, it can be done with FN + F5. FN + F4 is for hibernation. Check it please small symbols on FN 1-12 keys.

• [8i] need help with hierarchical (connection by) query

  First of all, I work in 8i.
  
  My problem is, I get the error ORA-01437 message: cannot have join with CONNECT BY.
  And the reason why I get this error because one of the criteria that I use to cut a few branches with is in another table... Is anyway to circumvent this? I tried a view online (but got the same error). I thought to use the connection by query views online and filtering off the coast of what I don't want in this way, but I don't know how to filter an entire branch...
  
  Simplified data examples:

  CREATE TABLE     bom_test
  (     parent          CHAR(25)
  ,     component     CHAR(25)
  ,     qty_per          NUMBER(9,5)
  );
  
  INSERT INTO     bom_test
  VALUES     ('ABC-1','101-34',10);
  INSERT INTO     bom_test
  VALUES     ('ABC-1','A-109-347',2);
  INSERT INTO     bom_test
  VALUES     ('ABC-1','ABC-100G',1);
  INSERT INTO     bom_test
  VALUES     ('ABC-1','1A247G01',2);
  INSERT INTO     bom_test
  VALUES     ('ABC-100G','70052',18);
  INSERT INTO     bom_test
  VALUES     ('ABC-100G','M9532-278',5);
  INSERT INTO     bom_test
  VALUES     ('1A247G01','X525-101',2);
  INSERT INTO     bom_test
  VALUES     ('1A247G01','1062-324',2);
  INSERT INTO     bom_test
  VALUES     ('X525-101','R245-9010',2);
  
  CREATE TABLE     part_test
  (     part_nbr     CHAR(25)
  ,     part_type     CHAR(1)
  );
  
  INSERT INTO     part_test
  VALUES     ('ABC-1','M');
  INSERT INTO     part_test
  VALUES     ('101-34','P');
  INSERT INTO     part_test
  VALUES     ('A-109-347','P');
  INSERT INTO     part_test
  VALUES     ('ABC-100G','M');
  INSERT INTO     part_test
  VALUES     ('1A247G01','P');
  INSERT INTO     part_test
  VALUES     ('70052','P');
  INSERT INTO     part_test
  VALUES     ('M9532-278','P');
  INSERT INTO     part_test
  VALUES     ('X525-101','M');
  INSERT INTO     part_test
  VALUES     ('1062-324','P');
  INSERT INTO     part_test
  VALUES     ('R245-9010','P');

  It's the questioning of base (with no pruning of branches):

  SELECT     LEVEL
  ,     b.component
  ,     b.parent
  ,     b.qty_per
  FROM     bom_test b
  START WITH          b.parent     = 'ABC-1'
  CONNECT BY PRIOR     b.component     = b.parent

  The above query results:

        LEVEL COMPONENT                 PARENT                        QTY_PER
  ----------- ------------------------- ------------------------- -----------
        1.000 101-34                    ABC-1                          10.000
        1.000 A-109-347                 ABC-1                           2.000
        1.000 ABC-100G                  ABC-1                           1.000
        2.000 70052                     ABC-100G                       18.000
        2.000 M9532-278                 ABC-100G                        5.000
        1.000 1A247G01                  ABC-1                           2.000
        2.000 X525-101                  1A247G01                        2.000
        3.000 R245-9010                 X525-101                        2.000
        2.000 1062-324                  1A247G01                        2.000
  
  9 rows selected.

  .. .but I want to only the branches (children, grandchildren, etc.) the type of part of'm '.
  for example:

        LEVEL COMPONENT                 PARENT                        QTY_PER
  ----------- ------------------------- ------------------------- -----------
        1.000 101-34                    ABC-1                          10.000
        1.000 A-109-347                 ABC-1                           2.000
        1.000 ABC-100G                  ABC-1                           1.000
        2.000 70052                     ABC-100G                       18.000
        2.000 M9532-278                 ABC-100G                        5.000
        1.000 1A247G01                  ABC-1                           2.000

  Any suggestions?

  Hello

  Difficult problem!

  Sorry for the false leads I posted last night.
  In Oracle 8.1, you can CONNECT BY first of all, in a view online and then to join her, but you can't do the reverse.
  We can change the 3 query to get the desired results by replacing the external CONNECTION BY a series of analytical functions to locate all ancestors and finally SELECT a line only if all the ancestors had part_type = am'.

  It's not pretty, but it works:

  SELECT       component, parent, qty_per
  --,       r_num, lvl
  --,       SUM (ancestor_ok)
  FROM        (       -- Begin in-line view to calculate ancestor_ok
         SELECT       m.*
         ,       CASE
                    WHEN c_num < lvl
                        THEN  LAG ( part_ok
                                    , r_num - NVL ( a_pos
                                                        , 0
                                        )
                              ) OVER ( PARTITION BY  c_num
                                               ORDER BY          r_num
                                       )
                END                    AS ancestor_ok
            FROM       (     -- Begin in-line view of 'M' parts in hierarchy
                    SELECT     h.component
                 ,     h.parent
                 ,     h.qty_per
                 ,     h.r_num
                 ,     h.lvl
                 ,     p.part_ok
                 ,     c.c_num
                 ,     MAX ( CASE
                                     WHEN  lvl = c_num
                                 THEN  r_num
                                 ELSE  0
                                  END
                              ) OVER ( PARTITION BY  c_num
                                            ORDER BY      r_num
                                     ROWS BETWEEN  UNBOUNDED PRECEDING
                                            AND        1          PRECEDING
                                 )       AS a_pos
                    FROM     (     -- Begin in-line view h, hierarchy from bom_test
                           SELECT     component
                           ,     parent
                           ,     qty_per
                           ,     ROWNUM          AS r_num
                           ,     LEVEL          AS lvl
                           FROM     bom_test
                           START WITH     parent     = 'ABC-1'
                           CONNECT BY     parent     = PRIOR component
                         ) h     -- End in-line view h, hierarchy from bom_test
                    ,     (      -- Begin in-line view p, to get part+_ok from part_test
                           SELECT  part_nbr
                           ,     CASE
                                      WHEN  part_type = 'M'
                                      THEN  1
                                      ELSE  0
                                END          AS part_ok
                           FROM    part_test
                         ) p     -- End in-line view p, to get part+_ok from part_test
                    ,     (     -- Begin in-line view c, counter
                           SELECT      ROWNUM           AS c_num
                           FROM      bom_test
                           WHERE      ROWNUM     <= 10     -- Guess at maximum number of levels, or omit
                         ) c     -- End in-line view c, counter
                    WHERE     p.part_nbr     = h.component
                 AND     c.c_num          <= h.lvl
                 ) m     -- End in-line view of 'M' parts in hierarchy
         )       -- End  in-line view to calculate ancestor_ok
  GROUP BY  component, parent, qty_per
  ,       r_num, lvl
  HAVING       lvl = 1
  OR       lvl = 1 + SUM (ancestor_ok)
  ORDER BY  r_num
  ;
  

  On 11 lines from the bottom, I assumed that the maximum depth of any node would be 10. If you do not higher that it should really be, or if you delete that WHEN the clause, then the query still works, it'll just be less effective.

  This works for your sample data and some variations I've tried, including the case where a component has many parents. Sorry, I could not test it very carefully. Try it on some of your actual data, and let me know if there are problems.

  I'll try to post a more detailed explanation later.
  Basically, it works by capturing the results CONNECT BY in subquery h. Each line is identified solely by r_num, giving its place in CONNECT BY results.
  In the subquery m, where most of the work takes place, it calculates the a_pos, the r_num of the ancestor of a node at a given level. That value is used in the LAG later function to see if the ancestor was part_type = am' or not. Only the lines where all the ancestors had part_type = am' are included in the final result set.

  I did have the time to read the messages you and Dev published today. I'll try to do this and get back to you.

  Once more remind the people responsible that the Oracle 8.1 was replaced 9 years ago. Whatever they save by not upgrading is offset by what you have to write and maintain much more complicated code, which in turn runs much, much slower than something on a more recent database.
  The following works in Oracle 10 and I think it would work in Oracle 9, too:

  SELECT     b.component, b.parent, b.qty_per
  FROM     bom_test     b
  JOIN     part_test    p     ON     b.component     = p.part_nbr
  START WITH      b.parent     = 'ABC-1'
  CONNECT BY     b.parent       = PRIOR b.component
       AND     PRIOR p.part_type = 'M'
  ;
  

  It's 7 lines of code instead of about 65 years it takes to do the same in Oracle 8.1.

• Problem with the connection to the public network.

  My laptop Pro windows 7 has suddenly changed its public network settings.

  I wish I could right click on the network and change at work without having to go through all the settings again.

  I seem to remember that you can change some settings to achieve this, but I do not remember where to change them.

  Any suggestion would be appreciated.

  Kind regards

  Mark

  Well, then please try this FixIt (and/or read how yow can change the settings on a clean year): http://support.microsoft.com/kb/2578723

  Julia

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• Suggestion for connecting NetGear switch for network home

  Hi all

  Recently, I bought NetGear ProSafe 8 - Port Gigabit Ethernet Switch GS108E. I would like to ask your help/suggestions to connect to my home network. The other components I have is Motorala SurfBoard SB6121 Cabel Modem and Cisco Valet M10 Wireless router.

  I have a Comcast Blast Plus service and if I check my internet speed by connecting my laptop directly to the cable modem, I get 50 Mbit/s Download and Upload of 11 Mbps. If I connect my laptop to the ethernet port of the router the speed I get is 25 Mbps download and still 11 Mbit/s upload. 50% reduction the internet download speed. So I decide to buy a NetGear Switch so that I can run all my connection cable of the switch and wait for the speed of download of 50 Mbps and 11 Mbps Upload.

  I made the connection like cable Modem--> Switch NetGear--> wireless router. In this configuration no my devices are able to connect to internet and I get message unidentified network. I tried to troubleshoot using the Windows Connection Manager, but he just asks me to turn off and on again. I tried this several times, but was not able to solve the problem.

  I want to return to the NetGear Switch mannual and made connections like shows in the quick installation guide. Cable modem-->--> Switch NetGear wireless router. In this configuration, all my devices are able to connect to internet but I get the speed of 25 Mbps download and 11 Mbps upload, identical to what I was getting into when running connection wireless router wired thorugh.

  So, essentially, NetGear switch does nothing for me except give me a few more ports to run the wired connections.

  It would be a great help if someone can guide me in the resolveing of my problem.

  Kind regards
  Shekhar

  He had bought a new router in the first place. Your router is the problem. Check on their website for a solution.

• Re: Satellite Pro A40 - connection to the local network

  Hello

  My names Andy and not bieng a total beginner computer, I tried to install all the drivers for my laptop model a SPA40 old fathers PSA45E-001VM-EN. (European model I think) everything looks ok, except that I can't get the ETHERNET driver.

  When I go into the Device Manager there is NO controller network displayed in the list and there is a yellow exclamation mark against two controllers ethernet ib the OTHER DEVICES tab looking here, I downloaded the atheros wlan xp file - 7704062.zip, broadcom wlan xp - installed 5604835.ziplan20070912134727.zip and nothing changes, we used to be able to go on the net and with the wifi card in the pci slot wireless go so I know its capable I think it's just the order of drivers and the drivers themselves,

  Then someone can point me in the right direction before as I have send myself crazy with this...

  You can

  regards and thanks in advance

  Andy

  Hey,.

  The drivers that you downloaded are WLAN Card and has nothing to do with the connection to the local network (Ethernet) normal

  I think you should check the Web from Toshiba site to download the latest LAN driver. You can find the drivers for Satellite Pro A40 in * archives *.
  ttp://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp h

• My PC is connected to the wireless network, but it is impossible to open any internet page. I went through the diagnosis of Internet Explorer, see below.

  Diagnosis of last run time: 28/01/12 10:16:32 Gateway diagnosis

  Entry door

  Info the following proxy configuration is used by IE: automatically detect settings: enabled Automatic Configuration Script: Proxy Server: Proxy bypass list:

  info could not get the proxy settings via the Proxy Automatic Configuration mechanism

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  repair automatic action: reset the network connection

  action to disable the network card

  activation of the card network action

  successfully activated information network adapter

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  user redirection of information in support of the appeal

  IP layer diagnostic

  Corrupted IP routing table

  prevent the default route is missing or not valid

  Invalid entries in the ARP cache

  action cache ARP has been emptied

  Diagnosis of IP Configuration

  Invalid IP address

  detected info valid IP address: 192.168.0.1

  Wireless diagnosis

  Wireless - Service disabled

  Wireless - user SSID

  required user input action: specify the name of the network or the SSID

  Wireless - first installation

  Info the name of the wireless network (SSID) to which the user wants to connect is IrinaLaptop-router.

  Wireless - Radio

  detected info valid IP address: 192.168.0.1

  Wireless - off limits

  Wireless - hardware problem

  Wireless - Novice user

  Wireless - network Ad - hoc

  Wireless - less preferred

  Wireless - 802. 1 active x

  Wireless - Configuration mismatch

  Wireless - low SNR

  WinSock diagnostic

  WinSock status

  info all base service provider entries are present in the Winsock Catalog.

  channels of information the Winsock Service provider are valid.

  Info entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

  Info entry RSVP UDP Service Provider provider passed the loopback communication test.

  Info entry RSVP TCP Service Provider provider passed the loopback communication test.

  Info connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter

  Network location detection

  Info to help home Internet connection

  Identification of network adapter

  Info network connection: name = connection to the LAN, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN

  Info network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless

  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394

  Info network connection: name = connection high speed, device = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info network connection: name = blank, peripheral = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info both Ethernet connections and wireless available, ask the user for selection

  required user input action: select network connection

  Info Wireless connection selected

  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn HTTP: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn HTTP: error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  WARN FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  WARN FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  error could not make an HTTP connection.

  error could not make an HTTPS connection.

  error could not make an FTP connection.

  I did not want to do this (restore point). However, I found a solution. It comes: http://forums.techguy.org/networking/1029348-network-connection-status-media-disconnected.html

  Where there are two crucial steps (do not know if the two were needed) RUN command (1) netsh int ip reset reset.log and (2) netsh winsock reset catalog
  
  
  After a restart, hey presto my wireless connection was repaired. This seems useful, but not essential (shows wireless performance but not the solution): http://wpc.475a.edgecastcdn.net/0047...etup.1.2.0.exe which is run Xirrus Wi-Fi Inspector 
  Thanks for your time!
  Good bye