Help with motion 3D 'easy '.

Similar Questions

• Help with 1921 SRI Easy VPN remote w / Easy VPN Site-to-Site access

  I have two 1921 ISR routers configured with easy site to site VPN.  I configured VPN each ISR ACL so that all networks on each site can communicate with the private networks of the other site.   I have a 1921 SRI also configured as an easy VPN server.

  Problem: when a remote user connects to the easy VPN server, the user can only access private networks on the site of the VPN server.  I added the IP network that is used for remote users (i.e. the Easy VPN Server IP pool) to each VPN ACL 1921, but the remote user still cannot access other sites private network via the VPN site to another and vice versa.

  Problem: I also have a problem with the easy VPN server, do not place a static host route in its routing table when he established a remote connection to the remote user and provides the remote user with an IP address of the VPN server's IP pool.  The VPN server does not perform this task the first time the user connects.  If the user disconnects and reconnects the router VPN Server does not have the static host route in its routing table for the new IP address given on the later connection.

  Any help is appreciated.

  THX,

  Greg

  Hello Greg,.

  The ASAs require the "same-security-traffic intra-interface permits" to allow through traffic but routers allow traversed by default (is there no need for equivalent command).

  Therefore, VPN clients can access A LAN but can't access the Remote LAN B on the Site to Site.

  You have added the pool of the VPN client to the ACL for the interesting site to Site traffic.

  You must also add the Remote LAN B to the ACL of tunneling split for VPN clients (assuming you are using split tunneling).

  In other words, the VPN router configuration has for customers VPN should allow remote control B LAN in the traffic that is allowed for the VPN clients.

  You can check the above and do the following test:

  1. try to connect to the remote VPN the B. LAN client

  2. check the "sh cry ips his" for the connection of the VPN client and check if there is a surveillance society being built between the pool and Remote LAN B.

  Federico.

• Need help with Motion Tracking-button in After Effects CS6

  Hello I just bought After Effects cs6 and wanted to try 'motion tracking' but I can't just push the button of motion tracking. Is there anyone who can help me with this problem?

  The responses are much appreciated!

  Are you following the instructions here?

• Need help with motion

  I have a question, where should I put MotionEvent.MOTION_END event listener? Here is my code, it's a motion copied as ActionScript3.0 in flash CS4:

  Import fl.motion.MotionEvent;
  Import fl.motion.AnimatorFactory;
  Import fl.motion.MotionBase;
  flash.filters import. *;
  to import flash.geom.Point;
  var __motion_mcRectangle_2:MotionBase;
  if(__motion_mcRectangle_2 == null) {}
  Import fl.motion.Motion;
  __motion_mcRectangle_2 = new Motion();
  __motion_mcRectangle_2.duration = 15;

  Call overrideTargetTransform to prevent scale, tilt,
  or values of rotation is made relative to the target
  transformation of the original object.
  __motion_mcRectangle_2.overrideTargetTransform ();

  Subsequent calls to addPropertyArray assign data values
  for each property interpolated. There is only one value in the table
  for every frame of the tween, or less if the last value
  remains the same for the rest of the frames.
  __motion_mcRectangle_2.addPropertyArray ('x', [0]);
  __motion_mcRectangle_2.addPropertyArray ("y", [0]);
  __motion_mcRectangle_2.addPropertyArray ("scaleX", [1.000000,1.023702,1.047405,1.071107,1.094809,1.118512,1.142214,1.165916,1.189619,1.21332 1,1.237023,1.260726,1.284428,1.308131,1.331833]);
  __motion_mcRectangle_2.addPropertyArray ("scaleY", [1.000000,1.023702,1.047405,1.071107,1.094809,1.118512,1.142214,1.165916,1.189619,1.21332 1,1.237023,1.260726,1.284428,1.308131,1.331833]);
  __motion_mcRectangle_2.addPropertyArray ("Scewx", [0]);
  __motion_mcRectangle_2.addPropertyArray ("transformations", [0]);
  __motion_mcRectangle_2.addPropertyArray ("rotationConcat", [0,3.21428,6.42857,9.64285,12.8571,16.0714,19.2857,22.5,25.7143,28.9286,32.1429,35.3571,3 8.5714,41.7857,45]);
  __motion_mcRectangle_2.addPropertyArray ("blendMode", "normal");

  Create an AnimatorFactory instance, that will manage
  targets for the corresponding request.
  var __animFactory_mcRectangle_2:AnimatorFactory = new AnimatorFactory (__motion_mcRectangle_2);

  Call the function on the AnimatorFactory addTarget
  instance to target a DisplayObject with this Motion.
  The second parameter is the number of times where the animation
  going to play - the default value 0 means there will be a loop.
  __animFactory_mcRectangle_2.addTarget (< instance name goes here >, 0);
  }

  Ive tried to uncomment the last line of code and put my name of clips of film in it, then to add the event listener, but that did not work.

  Im trying to fix this for almost two weeks and I'd be very grateful if someone helped me

  using classic tweens...

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• Need help with photos

  How can I find the appropriate folder for download on a Page I manage?  Photos current pictures but when I download it is records, I can't open, review or post.  Thanks for any help.  I searched some tutorials help with photos, records and others, and I'm struggling with something that used to be so easy?  Thanks again!

  Hi Brandi Jo,.

  To access the photos you want to put on your page, you want to export from the Photos app. Select the photos, go to file > export > export x pictures. Enter the details of your export, and then click export. Choose a location and click the export again. Once exported, you can use all of the tools you want to use for downloading your page.

  Some sites such as Vimeo or Flickr, allow you to export directly from Photos. Select the photos you want, go to the file menu > share > select the service you are exporting to and complete the export.

  Good luck.

• Generators work with Motion 5?

  Hello

  I have a project and my friend works on the editing part. He bought Apple Motion model for his Final Cut Pro X. But he did not have Apple Motion 5 in his system... He says its not working for him. So there need to install Apple Motion 5 in its system to do things? Generators or Transitions work with Motion 5?... Help, please

  Thank you

  Praveen

  No there not need movement. He needs to install it in the right place, if the generator did not come with an installer or is not a part of FxFactory.

  Here are some instructions: http://fcpxtemplates.com/install4fcpx/latest.htm

  HTH

• Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

  Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

  This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

  I want to thank all in advance for your answers.

  Nelson Santiago

  Hi NELSONSANTIAGO,

  1. when exactly you receive the error message?

  2. is the Belkin easy transfer cable recognized by the Windows XP computer?

  This file may be located on the Belkin Easy Transfer Cable installation disc.

  For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

  http://en-UK-support.Belkin.com/app/product/detail/p/4825

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Help with EasyLink Advisor for WRT54GS

  OK, when I try to make it appear the EasyLink Advisor to my router it says need administrator privileges, and then under that it says that you must be logged on as a user with administrator privileges to change the configuration of the computer for home networks. The thing is, though, that I'm logged on as administrator. I've never had this message before. I learned about the EasyLink Advisor repeatedly to find the IP address and other things so I can connect my Xbox, iPod Touch wifi and stuff like that. But now it doesn't let me do anything. I used to have Windows Vista on my computer, but then I upgraded to Windows 7 and I think this is the problem because it started to happen after I upgraded. Help!

  Yes easy Link Advisor is not supported on Windows 7.  You don't need it anyway.  Just connect to 192.168.1.1 with empty user name, admin password and check the router itself.

• Need help with Windows Live Mail password

  Microsoft support told me that the only way to get help with my last password is by e-mail or forums and I recorded many positions and got no response.  I gave them all of my personal info to my email account and no response. I called in and no response.  Should I give up on this account?  I got it for more than three years and many court and legal emails were sent there I need.  Please notify.

  I guess that you have a Live account Windows that you do not manage to connect to for various reasons.  Can clarify you what the case, and you can specify that you forgot your password or your user name?

  If you talk about this type of Forums (below) then they are very busy, but eventually you should get a response from Microsoft.  If the problem is that I'm guessing that this is so only Microsoft can fix the problem for you, posters not Microsoft, as we find in this Forum won't be able to do much for you other than to advice on a course of action to follow.

  Reset your password
  https://help.live.com/help.aspx?mkt=en-AU&project=liveidv1&format=B2&QueryType=keyword&query=QAF

  Support e-mail for Windows Live ID.
  https://support.live.com/eForm.aspx?ProductKey=WLID&CT=eformts&b56fbf12-3dcf-4c16-9E21-25f9e35ffe3d&mapquerytype=keyword&mapquery=QAF

  If I remember the way Microsoft handle such problems with the "lockout", it's that they contact you by E-mail (an address that you can still access) and either reset your password or clear the problem after having proved to their satisfaction that you are the owner of the blocked account.  The process is a lot easier if you have (in the setup) provided them with another email address, or installed (and remember) secret an answer to the Question.

  Unfortunately, the whole process may fail and you may forever lose this account.  If that were the case, you should start now to try to get duplicates of important emails from the original sender.

• I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install.

  Windows Easy Transfer of 64-bit to 32-bit, or vice versa

  Hello

  I'm trying to fix my settings my current machien to a W7 VM user to make sure that I have the transfer settings and I get all the information I want.  My machine is 64 bit, but the VM is 32-bit.  I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install...

  How I have a 64-bit Windows 7 Easy Transfer to install and if I get one to install and build a transfer saved the data file has there 'restore' on a 32-bit Windows?

  George George P Botuwell, programmer

  Hi George P Boutwell,.

  Thank you for using answers Forum.

  I think that VMware has a 64-bit/function version. You will need to contact them to verify this.
  64-bit to 32-bit is not supported by Windows Easy Transfer, as far as I know.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet?

  Dear all

  I need help with the following problem:

  Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet.

  Appreaciate help on this problem.

  MSD

  I find it easier and faster to use just this link, which goes to the same place as aid > online help for Photoshop:

  Using Photoshop | Photoshop help

  To bookmark so that you can find.

• Need help with photo editing

  Hello! So, I'm new here and this is my first post. (BTW, I CS6 and spin 10 Pro Windows)

  I have some photos that I need PhotoShop/edit. I take photos which are usually resolution 760 x 1024 and what makes them in 16:9 aspect ratio pictures without stretching it. What I use is Microsoft paint and cut the whole photo, stretching of the canvas up to 1920 x 1080 (16:9 ratio), paste the cut image where I want in the photo, then I select anywhere from 15 to 200 pixels (depending on the photo) of the side and stretch it across the empty space to fill it so the sides are not empty. Having a sense what I do? It has some drawbacks for me however, 1. When upscaling (to facilitate the 16:9) 1920 x 1080 my photos in bulk a few details and objects are a little wavy at the edges should be smooth. 2. when extending over the sides, it tends to not be able to choose the top and low 1 or 2 pixels so I must fill this space using the tools I have. 3. it is extremely laborious when you make several photos and faster I can do best. 4. it is Microsoft paint, sucks compared to PhotoShop, lol, duh. So I need some help with what I've done (the process I explained) makes faster and better.  I Photoshop CS6 (version student and yes I am a student), I have not used but... why the hell not? Well I installed on my PC a year or two before and then had problems of PC so I did a fresh install of Windows and reinstalled never, I thought I was going to need, but don't have, which is why I've never used it. Now, I do some photo editing and thought why not use PhotoShop? I did nothing as deactivate the license on my PC before reinstalling my Windows, whatever? I'm going to do a fresh install of windows on my desktop (first time in two years) on a new 512 GB Samsung SSD Pro 850 and I'm waiting for the SSD happen, so I was thought for now I would just use it on my laptop (1 TB EVO 850), but the license allows multiple PC even if I was the only one to use it? Is also easy/fast to learn PhotoShop? All I have to do is a photo of basic editing. Hope that everything I said is logical.

  Thank you!

  BTW, having an SSD really help a lot with PhotoShop?

  Hello

  Yes, you can install Photoshop CS6 on two machines.

  You had it previously on the same machine and I think you would have to reinstall it on the even later, so that would not cause any problems.

  Here is the download link for Photoshop CS6:

  Download Creative Suite 6 applications

  You can do all of these steps to resize an image in Photoshop without going into the paint.

  In Photoshop, open you picture and go to Image > size to resize and choose the desired image dimensions

  Here's the article for the same thing:

  Resizing of images

  Kind regards

  Claes