help with my lapi hard drive partitioning

Similar Questions

• Need help with a new hard drive in pavillion wiring elite M9400

  Hello fellow owners HP,.

  I recently bought a 1 TB hard drive for my Pavilion Elite M9400T.  I done my share of reading about installing to a new hard drive to another former post office and know how to physically install the disk in the slot, but my question starts with the wiring.

  I have a M9400T and saw the video of the installation here in this post.  I read to the bottom when he talks about the installation of additional hard disks into the empty Bay and had questions about the son in photo 5 on the photo below. I realized that I needed a Sata cable, so I bought one today, but I wonder if I can use other cables inside the case already for power. And who will be all I have to do to get this properly installed disc? I took pictures so that it would be easier for me to ask for help.

  

  

  A and B belong to my main hard drive and I want to know if I can use D (unused but looks like B) and a Sata cable bought my 2nd hard drive. I also noticed that B is related to C, which leads to the motherboard, so I didn't know if I needed to do the same for the 2nd drive.

  

  Connectors SATA 1 and 6 are taken by my hard drive and DVD drive (I think) cannot so I just put my 2nd hard drive on one of the remaining of the caps of 2-5?

  Thanks in advance for any and all tips and suggestions.

  BTW, I I was able to install the sticks of memory 2x2gb today without any problems for a total of 6 GB today but no matter what slots? I added the 2 slots of the fan and it seems to work very well.

  SO, Yes, you can use power connector would be ' for your new hard drive.  If you look closely at the image of a ' and follow the Red wire, it runs directly on the white molex (P4) beside the PSU connector.  He doesn't have to go to the motherboard.  Is not feed all the other components.

  Message edited by old_geekster on 11/13/2009 10:50

• I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only.

  I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.

  I've hit in this partition for a long time.

  I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.

  I've hit in this partition for a long time.

  This is due to files not movable, scattered in open spaces.  Windows Disk Manager has a few limitations... You can use a thrid party as EaseUS Partition Master Free Edition 9.2.2 freeware utility

  Its very easy to use and you can be dragged and resized your drive...

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• help with formatting of the accidental partition

  I had to re - start my operating system. whem I formatted the drive, I was installing on, I accidentally formatted partitions on one external drive. My question is; is it possible to pull content market back this player. or better yet, restore the partitions on this subject? I have a ton of things in it that I can't replace. any help would be greatly appreciated. and please. keep simple language please. I am a novice at this stuff. Thank you.

  There are 3 third-party programs that should be able to restore partitions or data that were on them. This might work only if you have done a quick format. Quick format just basically says "store data between points A and B", without deleting data that are there, so the data is recoverable. I don't know the names of all the programs, so maybe someone else can help you with that, but I can say until you find a do not do anything with the external hard drive because whatever it is placed on the disk will be overwriting previous data.

• TE2100 poster error e/s with 40 GB HARD drive

  I have a TE2100 I solved the problem with him not wanting to turn on, but now I want to put a 40gig HARD drive in it, but it comes up with an i/o error, it takes an old 6gig I have here no problem.

  Have updated the BIOS so don't know where to go then someone has any ideas or go through it before?
  I hope someone can help, thank you in advance.

  Hello

  Supported by this oldie storage capacities are 10, 20, 30 and 40 GB. If you should have any problems with 40 GB HARD drive.

  Here is the list of hard drives supported:
  10 GB Toshiba MK1017GAP
  20 GB Toshiba MK2018GAP
  20 GB IBM IC25N020ATDA04-0
  MK3017GAP Toshiba 30 GB
  30 GB IBM IC25N030ATDA04-0
  30 GB HITACHI DK23CA-30
  MK4018GAP Toshiba 40 GB

  What are you using it?

• hard drive partition creation

  How can I create hard drive Partition in my computer hp laptop 15-p073tx? Please tell...

  Hello Bappa7,

  Welcome to the HP Forums!

  I understand that you are looking for help to create a hard disk partition. I can certainly provide that information! Everything you need to know is in this Microsoft Web site: create and format a hard disk partition

  Please let me know if you have any other questions. Thank you!

  Mario

• Satellite A100 - 065 (PSAANA) - can I spend it with a SATA2 HARD drive?

  Hello Forum!

  I want to upgrade to a hard disk of 120 GB (Hitachi) to a 500 GB (Western Digital). I don't know if this A100 supports SATA2.

  I think it's to do with the hard disk controllers that are on the motherboard. This is information I don't think (using the pc Wizard). I am very happy to use a SATA drive, if it is the one which is compatible, but if it supports SATA 2, then obviously I would install a because they are 3GB of bandwidth instead of 1.5 GB as SATA.

  Any help would be greatly appreciated that my hard drive is full.

  Thanks in advance.

  Hello

  You can use a SATA2 HDD without problems. These discs hard are compatible downgrade to the old SATA1 standard, so you can use 500 GB HARD drive, as you suggested.
  But don t forget it will not work with SATA1 speeds, but this should not be a problem normally.

  So have fun with the new HARD drive! ;)

  Good bye

• external hard drive partition in disk utility impossible

  on El Capitan, disk utility does not a new external hard drive partitioning.

  When is this corrected?  Is there a work-around.

  With I TB seagate drive and I cannot partition?  It is not useful.

  Marilyn

  Mac mini end of 2014 2.6 Ghz Intel core i 5

  8GB memory

  El Capitan

  Of course, it does.

  Select the drive:

  

  Set how many partitions:

  

  Click on the Add [+] button once for each partition that you want to add. You can set the size using the size field.

  Before you start to complain about something, it would be wise to get your facts straight.

• Satellite L670 - change of HARD drive partitions

  I just brought a new toshiba laptop Satellite L670.
  I just watched the player and its distribution, but they put the 139g on the d drive,
  Is there anyway I can change this?

  Hello

  How do you change it?
  I put t recommend that before you didn't create a Toshiba Recovery disk!
  You must create this disk to reinstall the OS again in case something goes wrong with the HARD drive partitions

  In General, you can change the size of partitions in Windows 7 disk management.
  To start disk management diskmgmt.msc term use

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!

• Synchronize folders with an external hard drive.

  Can anyone help? I want to be able to sync my library and office with an external hard drive (Freecom on USB) files.  The goal is to be able to maintain an up to the minute backup of all my files, so that the next time my hard drive failure I have to absolutely all backed up. I am aware that that is not only the problem of accidental deletion of files so periodically I will also manually save the backup to a different folder on the same hard drive, or is it also possible to get windows to schedule this backup type automatically)? Or y at - it another way to achieve this level of security of the files without a mirror raid arrays (or spend more money on hardware or software)?

  Try this:

  MS SyncToy

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=C26EFA36-98E0-4EE9-A7C5-98D0592D8C52&displaylang=en

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• How can I make a DVD of the restore hidden in my external hard drive partition recovery

  How can I make a DVD of the restore hidden in my external hard drive partition recovery because I want to recover my toshiba satellite L840 that does not respond directly to my hard drive so I put my laptop to an external HARD drive and then I want to copy a DVD recovery partition

  Your question is a bit confusing, you can boot the laptop at all? Have you tried booting in safe mode, you can make a recovery DVD set from there, the folder Toshiba.

  With the drive in the Toshiba, you should be able to use a F, F10, F11, or F12 key to activate the installation from the partition hidden started upward.

  Otherwise, you can contact Toshiba, and with the model of the product id number and the laptop for Windows, you can buy a set of disks.