Help with shared folders, please

Running Win Vista/64, almost all folders and files under Documents are also shared, with the "two guys" icon superimposed on the icons of folders and files. Obviously because they are 'shared', these files and folders are very difficult to remove or move, take resources from the computer for a minute or more per operation. I tried 'break' them and even to remove the names of all listed users for the file or folder, but can't get them to the State not shared. Can someone please? Either way, all folders and files becomes shared when I opened Windows Movie Maker once to see what it could be used for. Just open the program seems to be what has marked all these files and folders as 'shared '.

Finally, I realized that for me. With Windows Explorer, click a shared folder in the left pane so that all shared files are visible on the right. Select (highlight) all the files, then right click on one and when the window opens, click on: "share...." ». Then click on "Stop sharing" and to sit back and wait a few minutes. I have no idea why, but it takes for-ev-er to run the "stop sharing". Once the files 'no sharing', then you right click on the folder and do the same thing with her. Be prepared to spend a lot of time to exercise, according to the number of files shared.

Always start at the lowest level (deeper?) and backward from there. You can not cancel sharing a folder until all the files inside are shared.

Yet once, which required all this simply opened the program Windows Movie Maker comes with Vista. Of course, it goes through your hard drive and share all the files that could never have no interaction with the Movie Maker program... same word .doc and .pdf files.

Tags: Windows

Steps to reproduce

I wrote a PHP script that seeks a different file names for a given text, until it crashes. Store this file in the shared folder and run it with php f. As you can see, all the content of the file is commented out, so it shouldn't affect anything.

<?php
$content = <<<'EOT'
<?php
/*njsRtWyvEHREGDwjZEIuuwOCJidhxoMo
lsdTFPMPhCnHYdjylYmAlJtOrNQRZRzFDQsX
QAYugjeSRojQLImGMsGzvsNxSdbvIUZbHvVuXfDTJqyXxjbiNoMgiQGVlREJPPacTIbn
emIhHyATFwSAHnoTRVtUppVVRoWHDAjMvkoADVBCTJFNT
aCUTsQsZbIhyaQoSCWcpuhgPcoWBD
bXzAuYZueusNALsxIYTpkaHGGwmLkdkEPsQRSyPojOhCTUksYnAdlr
rDfHEzqctbHpFBQkUTOWgYsYKwBzguuNxktJDitUkSDLABoDjYlrQzmtBxRU
TRZqbDEgTEGqpFAXbCADhmwVltDJGqvsasypalIThuzA
VDJkyuQAQYJoiTyuoMtjeoXtZMVZKhWxWGbChTZjVWcNX
ANAKXbsERdugbcApTEjabtRSBvMAjreOdSbCyqBikXMADmzTyIijEwBYhWXzEIQHVn
LkasQDaUvNBNJghMrpNBBnqqLaUsoxqjDoGUoQjG
uMQEbeYxRcQSICioqjMOLMZZhUbFTOOLdsGHrVSlk
IxnyGZMFpCNRqFBOYSbSbyzqhzZyjrkUzjEPXSoZNnbnNsdHVdUKosgpVCDSakQjEgNmUM
vmusESUYiXPKKqvPfVghfqmTniFjPUorDvEpGGvRaKln
vrQGhLncjvcGQRBWVGKQQVDfbCPRYrJkUTvLpWfIQscGq
eaZkNjlIfWCYaWMIHPjUkQNYtEdoJbTCYbHqmQYnaIEsVrYXiqibBWrZIFdcyGdCqLRaW
KjYicadGOioWoiYJrrfUjdTwKhNnhppkjhXZdUmWMxfiqetHCVvZfrKieR
yhRbxbgbeORKMVxFmLmTexQhALUTNkOGhjaESxabCZSbcMlNLhz
QnRzjUstpUDJpAcRLSjpPGSwaPKaVqdXrlXsHRtCFpbaEhocTxUAgPKwFvTskukCbCItNS
vSDsuvlhCtMwYLOQRaJkSfbCaSlUsKZLVnuESjFwiAuJvIumSiCAHYBjpOFWvS
pPRnkwaQCgYUtrHujVaEvxQ
NtmJNjkSoCTvMzLXvmDBnymC
pddMGqTojVadloHtRkipEFiZrWIsCXaqdayQWzynSiXtBIjesEguDtIfmd
ZmkZrfNbXmtaUiOBvVvKmFaHePX
CVCGMVGYjzjXyELANgIyAcsjfvdaGdDEttAofjawnondQuScwBUrAUdYxxerNG
llGfZwYymZrykyajgjRGkDMpREVsybITgbTlgfhJUWJgGAtEM
yskdfRkKDBaSfgSgLpKgQBmHybHxo
EMlIkmGTopRdwcNxzLZigZxhakIcdGtlXVrEyPEgrxzG
wxEFZcpSvgNUsiEVKZsdWGnSFiypJLvRnBUPGNa
crmUUXjOENCuxstveIQFfhZYLmUljXEMIkH
pBpmdMAMuBmTWlYZHOgxnPxQeHpMnTDnQRTmBRpoSRHZABhiQO
qGksOOcpPKfcKhpdQVDvOcUzjsHIrIUSndRreDHdMtxmorrfaUyNmvuS
uzQQlEcZXpaILAbCXblyXNQxARvGcRSyXDdAwZuBACpQJkZZNBJSkf
ptcApSlflVBLBxGGtQLBWgoLciHHZsgixDFWqejANmDqiVWhGwQzQKpcNPH
KIWUpmzHnUVBNBJCxaQKsy
lRQCfqSWaiqkpyKmodooVOlEcmiUfElZhoDwhWnivqeEqWOEEJRRlbAPdlAJioAXBZpTXc
pUzpJRxevfDotRbgqCtdzqIXrCahDDnLqymyREXzAvmMniQghmwbMIdnprCsdpxtsvGplq
ArYJDZfLGhQVEyzwnPyavPgdvbpIKQyTCwgjiZuQUPQumlcKllkDRfErLLqyNGrLMHBpzY
biPHNtPYGjrYztLOYhaoPmyVahPtiojqptGVQwbKmrFiqNfSv
nnHyvOuEgLWZxCfrfmAbCspFUYMugmGZZlXFMSYfUlOQxcsOxpSUOEfvI
ztnBZJKMbEoQZfRzbnQkUXC
kXEEPviTpYGNrikuJbkfXSyALJmFIzmVamWouZqAwGanZFCSiN
AVUDwCPZWUJNIrmUwpaoSWTGKmtkev
uaKSTGLYHTvKAFQRFnMbCBEJQbpgrxOUYTTLGExcQokfKVmEhaCjK
xBqwGyJyqvscyLMQlsgzfXnIKUZZZfNwsu
IVwNskHoJTBrRMtKTaxcgoKyUEVONWywwxKbCMMqcw
aryEooyClPfmWeLRdMGcIDUhWKMztUQrsQmKwTVVXUOxZnMwxr
PuKuPRLLYsvbvUUIXNVSkdITWLTOmCQrbFEArsfwpTIQYmRNPDLvJheP
HFSyzYzvuVUQHsahuUQqiPBaDEYJuiySqZfVYPqsaKEm
aNsbVyGFRpNREYAcFoFLbCNRa
jQfdxcrOqGHQkcuqGxTMHoGSgAmVAxpPMmhtwRUCKshdXLNnggmuOhgbClYbUzmiBwQ
UOcNuUNpmEJwDHGpQLEHzIrFlJlEJALIhQyEpYgcVzsmHIffBBpbhnidaK
SIjqXPyiGTTCUSCZdqZcXOUVCGgAZZuzgpVpjVYkRArhZgHNc
pbjeIcbCtYZKhvCdxRSVloKVDGXLYqnbjBJZtieEGYprYWtDRH
pDIELcriTtSXVsTnHBboDfxHJemyOwmPqCDjJjdFsm
wUKVYearKMHOwWgptjVJAEresgHifdhkdQdKfrYXJUrtyXqTDUbYOjCsCOEnoWZJDiFt
JmzMKbzvfZDmhFHRnMATdBOcFOiicGGTYEQhvKjazZNgXTP
abtSIvcZpQXNDiAIBIRkwOKqLjemQjUHywrfCHNxCNRmMosAOGTHEzCqNfcxQQmTvUx
puCzHyJacoGHtUDhVLDlcCXBytJpJDOIEUtDcWxENdHXfhGaRnfJKZpOsRaEstLopUBoUv
vWJvmIRLprUJlMiNqdrPD
PrXisnQvcMbmZwMrgaZcJcIuFlpuJXwtzasYQHUrTinNtXJYxKftihuApOxUFpSxyjqbWW
CqHRWXTrsTIuXEZbjNCEwhPNAZoqlAoQD
XWanteqzjVEzbBIhCEeWsnjdzCWORDAXfPKvJZIfb
qMHQasPmLItsTsxijJrkQbaowAPjJyasyilAYTwSg
wefnnxtBFkoYMEXoZiYdKtEqoGtnymFqkvuLHxOmv
bNjqEWbtxaioqkYPmwXKaqAxQLHJHmJTfJBZymDLvx
obVmpstUZETvYISUiqySvemOXCzjuWGvfgC
FKJCBTIdSbbnlvKIkBqbMhAhwkAQMexej
oWBdyunrwxJuWtHsLtIcveTYmCATjiEDoZuggrAxlQhjlUMtMYR
TqkWuIblrRzKHhNWaGPOd
ouYgqSMhhngaisNrySZEoJuZrFXHlfPqfWoEZzOiqMqilx
sQOTKTweognuFhfrluhjAXa
PqplUMYbKtCvcHYhpcgShKmulTWLprLohwqAWMNyTcNYZJFcWtn
UwOXvcdCeJiQrEsCycJwSyZJqrsaiSVFcPOMQKCJqRhfAgBmmgDvdsFUIqHWiagR
wjRmbEIMrDpJXKqGRndpTUfbpjwlpmBtUOIbdngG
MmItcEisVEgXUnnvEiTIhMPRazVFEplnBfYQWqLMi
HGZZdDnjVLjluFnDlFLHWseOeJXSFjrfBUXLcIoITqozfHolhIdCmHUsKKYtnng
FrlAfGIMXlQRYfsaigOJABjLRknqdIbZlZVcLOqjKYmPcjrHH
SLrsFrNInZMHVeWJHPKwGFKNapGNMgXFqtPOdB
KExsWUQXnoORsjShtiRRCTYSKwSAhQjgZbzwRHTsiWGIukdOD
PJKBKqUvyQvWlsrJENAeNLiVTDapsYAnqQwYFuskUVaWHtditUJpiFVsJwKytWu
aihAvXNVkxTqixFtPumJDocWAmvocxDHZtUzCcEoFHdwFzclKlAdfLOuhZgqZDTptmXii
DgYmqpKdlbCtenKLhAVrWmJuDofoWpCPHWYdtjXZiYajKuFh
GGyFSgSVkGRwVakkZafdGvOMHalwDyeOZY
oFrLUGOVbaHClgsfLepNpHagKdPzLGnilQUAbPyiSrVcIiJaChvlYOIIWWPRPl

*/
EOT;

for($i = 0; $i < 1000; $i++) {
     // generate a random number
     $rnd = rand(0, 1000);
     $filename = 'require' . $rnd . '.php';
     echo "Try no. $i, filename $filename\n";
     // write the content to $filename
     file_put_contents($filename, $content);
     // require the same file
     require($filename);
}

I wrote another script to generate the build the combination of text and name of the file that is causing the problem:

<?php

// the decimal ASCII code of all upper and lower case chars
$ascii_alpha_chars= array_merge(range(65, 90), range(97, 122));

// how many tries
$count = 500;

$out= '';
for($i = 0; $i < $count; $i++) {
     // generate a random number of files
     $lines = rand(70, 90);
     $out ='';
     for($j = 0; $j < $lines; $j++) {
          // ...and a random number of chars on each line
          $rand = rand(30, 70);
          $out .= get_random_chars($rand) . "\n";
     }
     write_and_require($out);
//     echo "$i\n";
}

function write_and_require($out) {
     // write the content to a file, require it, and delete it
     $sourceCode= "<?php\n/*n$out\n*/\n";
     for($i = 0; $i < 50; $i++) {
          $rnd = rand(0, 1000);
          $filename = 'require' . $rnd . '.php';
//          echo "$filename\n";
          file_put_contents($filename, $sourceCode);
          require_once($filename);
          unlink($filename);
     }
}

function get_random_chars($n) {
     global $ascii_alpha_chars;
     $out = '';
     for($i = 0; $i < $n; $i++) {
          // add a random char
          $out .= chr($ascii_alpha_chars[array_rand($ascii_alpha_chars)]);
     }
     return $out;
}

This problem occurs only for the upgrade of VMware 8 and only when the script runs in the shared folders, I strongly suspect that it is a problem within the VMware stack.

Can anyone elso reproduce this behavior?

Hello

If you use the kernel of an open-vm-tools HGFS customer then yes there are bugs because the version provided with that was broken and not tested. People has not listened to my complaints about it.

Current recommended approach is to always use the installation of VMware tools for the shared folders feature.

Open-vm-tools are used to install tools user mode only. We try to make all of the features available with these, including a file sharing client FUSE based. Version 10 of the open-vm-tools will have this.

Stick with VMware tools install for now for file sharing.

Thanks for your great art information and debugging this issue.

Steve

Need help with the composer please?

I am very new to view and work my way through the implementation in our society. I get two different messages when the composer fails.
"Could not perform the operation active directory. COM 2147016654 "error code
"the partial distinguished name of the ad container specified is not valid.
I would appreciate help with this. Thank you very much in advance!
-Brandon

Please consider awarding points by scoring responses as 'correct' or 'useful '.

Help with required fields please

I tried to get help with a required field and of forum aid said he's got to work for me but I can't and I have not been able to get answers more of him to help me more.
I try to have a radio box when YES is selected to demand another field to fill. The script I got is:
getField("Location").required = (getField("Group1").value == 'Yes');
Location is the area I need to be filled if the Group 1 is Yes. The previous programme of assistance forum said I had to have this script in the two fields in Group 1 and when I do that, nothing else happens.
What I am doing wrong?
Please, I need to fix this immediately and I'll use this java script on many other forms that I have so I need to get there soon.
Thank you in advance.

This works. It's perfect. Thank you very much. You're my hero!

Help with button code please?

I am a novice and have completed my first animated film. I need help with action script.
The film is currently in a loop and I created and invisible button the size of the frame with the intention that a user can click on the picture of the movie to stop it and the second click continue the film from where it stopped.
I used AS event handler method to stop the sequence. I tested it and it works. But I can't understand the appropriate code to restart the movie.
Two questions;
1. I go to the task the right way? (should I use two buttons, a stop, a tenure)?
2. If my approach is possible, can someone give me the right to re - start the movie and put me out of my misery please?

You can use the following after having changed 'yourbutton' and 'yourmovieclip' to use appropriate instance names:

{yourbutton.onRelease = function ()}

{if(!this.) Toggle)}

yourmovieclip. Stop();

} else {}

yourmovieclip. Play();

}

This.Toggle =! This.Toggle;

}

Help with multitasking it please?

Since I got my phone (Moto G 8 GB), multitasking has been terrible. I love the phone, but it's his left out major. Switching between the 2 applications at the same time generally involves having to reload the entire application, even some of the lighter applications such as contacts. I looked in the settings and everything is OK, as the apos as the default background. Also, I don't seem to have any heavy applications running in the background. Facebook is the heaviest app I have on my phone. I wonder if there is anything I can do to remedy to this or if anyone else has this problem?

When you switch between applications, they restart because the system runs on the RAM. You see the message to reboot on some of these processes because the system killed these processes in order to keep others running and to free some RAM when its need is why you always have a bit of free RAM.

Even the Air iPad with 1 GB of RAM, even that bike G, has problems, keeping applications running in the background. I'm afraid that this problem is quite normal if you have applications that run in the background taking up RAM. The system kills just the process relatively little important, as Google play music and display of WiFi, to keep others running and have at least a little memory available when it is needed.

So you're an Android user average above that you have several applications that won't install average consumers, so I recommend going with a phone in the future who has at least 2 GB of RAM.

P.S. I read in places that Motorola is aggressive with background applications to help with the battery, so maybe that is why the system cannot even keep apps simple people in memory, even if you have still a few available RAM.

Problems with shared folders

I spent a few hours trying to figure this out. I have VMware Fusion 3.1 on my MacBook running 10.6.4 and a Windows 7 Ultimate VM. I went to the Machine virtual and added the player shared, changed the permissions read and write. After that, he created a folder on my desktop which has been
. host\Shared folder. I double click the file and it fails. I decided to share the OSX folder as well without success. I made sure my firewall in OSX and Windows 7 is off, still no luck.
Any advice?

thrlride wrote:

I spent a few hours trying to figure this out. I have VMware Fusion 3.1 on my MacBook running 10.6.4 and a Windows 7 Ultimate VM. I went to the Machine virtual and added the player shared, changed permissions read & write. After that, he created a folder on my desktop which has been
. host\Shared folder. I double click the file and it fails.

The UNC path to the shared folders on VMware Fusion 3.x should be"
VMware-host\Shared records"not"
. host\Shared folder"and if it is the latter which is a problem. I do turn to share and then uninstall/reinstall VMware Tools and activate sharing and see where you are then.

Need help with windows update please!

Tried for months now to get windows update to work properly. I still see a message pop up in my lower toolbar, that says: windows cannot verify the updates, with a red x. I'll try to update manually and it shows 0% all the time. When I go and check to see if there have been updated, it will show a little from time to time, who have downloaded successfully, but believe that is made during a unrolled task he is set to make only 1 or two from time to time will show. I don't know what else to do. It's Windows Vista. Help, please... My Windows defender seems to fine day. Help, please... Thank you...

Hello

I guess that part of the question could be a driver which is really old or similar should not be loaded.

This exit Windows updates on (after you have access) and stop the updates of the driver to load.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

---------------------------------------------------

You can use the solutions in this KB - 3 methods and I listed a little help for them below

The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358

Method 1: Start Windows Vista with the Windows installation media and use the repair feature

How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.html

You can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.

This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

Try recovery options Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

Method 2: Start the system in safe mode and then use the system restore feature

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

You can also do a restore of the system of starting with a Vista disk.

Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

See article below for that.

You can use this method on the updates that have this problem.
http://support.Microsoft.com/kb/949358

Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
and install it.

Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx

------------------------------------------------------

Once you are in Windows I was running once again reset here as a precaution.

How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058

Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good.

BlackBerry smartphones help with my bbm, please

Greetings...
Broke my old style of bb, got a new and a larger memory card. I downloaded the latest version of bbm and then restored contacts back... but still not able to send and receive messages. Help please and thank you...

Hi there and welcome to the forums,

There are a few quick things you can try:

1 check to make sure that your phone can receive data. Since you are the Sprint, when you look at the upper right of the screen, it should say 1XEV. If it is not capitalized (i.e. 1xev), you should probably call Sprint and let them take a look at all the settings on your account.

2. go to Options > Advanced Options > host Routing Tables, press the BB Menu key and select Save now. This will help save your BB on the BlackBerry network.

3. go to your e-mail settings, log in (if necessary), press the BB Menu key and select Service books. On the next screen, choose the option to send Service directories.

4. follow steps 2 & 3 with a battery pull if it still does not work.

That should do it, but if not, then the next step would be to contact Sprint without worrying to make sure that your BB has been implemented properly on their end.

Good luck and we keep abreast!

Can anyone help with my function please?

Hi all
I created a function and I was wondering if someone could take a look and help me with a particular problem, that I am experiencing. The function is shown below. It works fine, but I get the following error:
The method call failed because [System.Object []] does not contain a method named "op_Division.
D:\SR\WindowsPowershell\Modules\SRvSphereTools\SRvSphereTools.psm1:875 char: 13
+ $VMprops = [ordered]@{'Name' = $vmview.] Name;
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: InvalidOperation: (op_Division:String)], RuntimeException
+ FullyQualifiedErrorId: MethodNotFound
Now, I know when I get this error whenever I enter a virtual machine name that has a suffix. Which means that I will enter a virtual machine as a 'Server' name and it relates very well again. When I enter a name such as "server_' it relates with the above error again.» I also noticed if I go in $ server he reports again with the name shortened to the server. Is it something to do with my input variables, do not deal with the prefix. I wouldve thought that he would bring back ' the two inputs to the output.
As usual any help would be MUCH appreciated.
Thank you
Munster99
Function Get - xVM {}
< #.
. LOGBOOK
Gets the IMPORTANT details for a virtual computer
. DESCRIPTION
Gets the relevant information for a virtual machine
. PARAMETER vmname
An object 'vSphere VM' or a 'string. '
. ENTRIES
Input object Types\\
[VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl] or
[System.String]
. EXAMPLE OF
PS > Get-SRVM - VM1, VM2 VM...
. EXAMPLE OF
PS > Get-Content C:\VMs.txt | Get - xVM | Export-csv c:\VMResults.csv
. EXAMPLE OF
PS > Get - xVM server | Export-csv c:\VMResults.csv
You can send an a vCenter Server virtual computer object through the pipeline.
. NOTES
Version: 1.0 - the first project
# >
[CmdletBinding()]
(PARAM
[Parameter (mandatory = $true,)]
ValueFromPipeline = $true,
ValueFromPipelineByPropertyName = $true,
Position = 0,
HelpMessage = "Please enter the VM name")]
[ValidateNotNullOrEmpty()]
[Alias ('Name')]
[PSObject []] $VMName.
[Parameter()]
[switch] $ShowWindow
)
BEGIN {}
$OutputObj = @ () # output initialization object array
}
{IN PROCESS
{Foreach ($VM to $VMName)
$VM Write-Verbose
$VM Write-Verbose. GetType(). Name
If ($VM. GetType(). Name - eq 'string') {}
$vmview = get-View - Viewtype VirtualMachine-property name, summary, reviews, filter-Config @{'Name' = '$VM'}
If (!) (($vmview))) {}
Write-Warning "$VM is NOT a virtual machine.
Continue
}
} # If
ElseIf ($VM - is [VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl]) {}
$VM Write-Verbose. Name
$vmview = get-View - Viewtype VirtualMachine-property name, summary, reviews, filter-Config @{'Name' = '$VM'}
} else if #.
#---Insert Get code here
$VMprops = [ordered]@{'Name' = $vmview.] Name;
"ToolsStatus" = $vmview.guest.ToolsStatus;
'CTKEnabled' = ($vmview. Config.ExtraConfig | where {$_.key - eq "ctkenabled"}) .value;
'vCPUs' = $vmview.summary.config.NumCpu;
"vCPUsPerSkt" = $vmview.config.hardware.NumCoresPerSocket;
'RamGB' = ($vmview.summary.config.MemorySizeMB/1kb);
'IP' = $vmview.summary.guest.ipaddress;
'Portgroup' = $vmview.guest.net.network;
'MAC' = $vmview.guest.net.MacAddress;
'UuID' = $vmview.summary.config.Uuid;
}
$Obj PSObject = new-Object-property $VMProps
$OutputObj += $Obj
} # foreach VM
} foreach process #.
{END}
Write-Output $OutputObj # exit EXIT pipeline objects
}
}

If the Get-View Filter parameter returns more 1 object in these cases?

Remember that the filter uses a RegEx expression.

Try the filter like that

$vmview = get-View - Viewtype VirtualMachine-property name, summary, reviews, filter-Config @{' Name'= "^ $($VM) ' $ '"}

Can someone help with this request please

I have a table something like below

Things_t
Characteristic of things float value
Element 1 red color
1 packaging
Point 2 square shape
Point 2 brand Spunk

Now I want to reterive an element with any of its tank as Null values. Using the query 'select distinct things from things_t, where there is no char value' fetch element 1 also with point 2. I want to retrieve a record of the thing for which none of the tank, the values are Null as point 2. Can you please help me with this request.

Try this:

WITH t AS
(SELECT 1 item_id, 17436 chr_id, 14225034 chr_val_id FROM dual UNION
 SELECT 1 item_id, 39 chr_id, 14276173 chr_val_id FROM dual UNION
 SELECT 1 item_id, 17774 chr_id, NULL chr_val_id FROM dual UNION
 SELECT 1 item_id, 265 chr_id, 20502978 chr_val_id FROM dual UNION
 SELECT 1 item_id, 16978 chr_id, 797233 chr_val_id FROM dual UNION
 SELECT 1 item_id, 13092 chr_id, 5666917 chr_val_id FROM dual UNION
 SELECT 1 item_id, 15228 chr_id, 1209758 chr_val_id FROM dual UNION
 SELECT 2 item_id, 112 chr_id,  12705342 chr_val_id FROM dual UNION
 SELECT 2 item_id, 6945 chr_id, NULL chr_val_id FROM dual UNION
 SELECT 2 item_id, 70 chr_id, 12597376 chr_val_id FROM dual UNION
 SELECT 2 item_id, 16832 chr_id, NULL chr_val_id FROM dual UNION
 SELECT 2 item_id, 7886 chr_id, 9588619 chr_val_id FROM dual UNION
 SELECT 2 item_id, 6986 chr_id, 2659351 chr_val_id FROM dual UNION
 SELECT 3 item_id, 9531 chr_id, 8910943 chr_val_id FROM dual UNION
 SELECT 3 item_id, 9798 chr_id, 8717531 chr_val_id FROM dual UNION
 SELECT 3 item_id, 17446 chr_id, 12266441 chr_val_id FROM dual UNION
 SELECT 3 item_id, 4830 chr_id, 13683090 chr_val_id FROM dual UNION
 SELECT 3 item_id, 9518 chr_id, 834772 chr_val_id FROM dual UNION
 SELECT 3 item_id, 11031 chr_id, 20233753 chr_val_id FROM dual UNION
 SELECT 3 item_id, 12564 chr_id, 2282478 chr_val_id FROM dual)
SELECT DISTINCT item_id
FROM   t
MINUS
SELECT DISTINCT item_id
FROM   t
WHERE  chr_val_id IS NULL

Or this:

SELECT item_id
FROM  (SELECT   item_id,
                MIN(NVL(chr_val_id, -1)) min_chr_val_id
       FROM     t
       GROUP BY item_id)
WHERE  min_chr_val_id != -1

Published by: lee200 on October 15, 2012 09:22

Need help with a BR - please help!
Hello

I would ask you please to help me with your ideas on achievening the sub condition. I have some ideas on this operation, but I am not able to set up everything to make it work. Please let me know your thoughts. Will be a great help.

Requirement:

The requirement is that if the user enters a data value for the Member account 'P' on the data form at any level (Top most parent, intermediate parent level 0 or level), it should work in the following way.

(1) to check what level the user has entered a value for 'P '. We have a relationship that V = P * T. So I thought, what if I dynamically calculate the value 'V' each time for each product should I where they changed as if they change the value "P" it would change the value 'V', as both are related. So, basically I compare the stored value of 'V' with the value of 'V' calculated dynamically.

(2) if the value of 'V' has been changed to this level (i.e. If stored V Dyn.) (V) and this condition is met, then all descendants of the current Member should get the same value of P as input by the user for the current Member.

(3) it should work regardless of what parent level they enter and should begin to fill in the values of this level. And if they fall into the 'P' value to level 0 members, he should leave them as it is without substitution and must be used in the consolidation.

That's what I could think of-

Please suggest changes that does not always work according to the requirement.

FIX(..........)

IF (@ISDESC ("LB") AND 'V'-> @PARENT (@CURRMBR (Product)) P-> @PARENT (@CURRMBR (Product)) * T-> @PARENT (@CURRMBR (Product)))
P > @CURRMBR (Product) = @PARENTVAL (product, P);

In the same way, IFELSE, for another condition

ENDIF
)
ENDFIX;

But this does not work for all cases. Lets say that I have 3 levels in my hierarchy for the product and if users enter at level 2, it does not work and replace the input value including the parent value which I do not know why, because in the first place it should not enter the loop just like the custom of condition be met. Reason, the user changed to level 2 and 3 not, so it should do nothing from what I understand.

Please let me know your thoughts.
Thank you.
Hello
Below should work with these assumptions:
1. you should not be aggregating V and P on products or you should use other members who together ever.
2. There are three generations (or 4 levels) in the dimension of your product. If you have more levels, you must change the marked spot.
3 and as you suggest, a new account is used for the comparison. Here it is called M

FIX (...)

DATACOPY V and M;
ENDFIX

SET CREATENONMISSINGBLK
FIX (...)
Fix (@IDESCENDANTS (Product))
« V « = » P » * « T » ;
ENDFIX
Fix (@IDESCENDANTS (Product))
Budget)
/ * Change below for additional generations * /.
IF (@ANCESTVAL(Product,3,V)! =@ANCESTVAL(Product,3,M))
"P"=@ANCESTVAL(Product,3,P);
ENDIF
IF (@ANCESTVAL(Product,2,V)! =@ANCESTVAL(Product,2,M))
"P"=@ANCESTVAL(Product,2,P);
ENDIF
IF (@ANCESTVAL(Product,1,V)! =@ANCESTVAL(Product,1,M))
"P"=@ANCESTVAL(Product,1,P);
ENDIF
)
ENDFIX
Fix (@IDESCENDANTS (Product))
« V « = » P » * « T » ;
ENDFIX
ENDFIX
CREATENONMISSINGBLK OFF SET;

FIX (...)
DATACOPY V and M;
ENDFIX

See you soon,.
Alp

Need help with shared links

I need help understanding the shared hyperlink option when creating hyperlinks in InDesign CS5 (Mac) and how to change a hyperlink target shared.
I want to build a document that contains links to files on the server from the client. The final use is to make a PDF file in which the customer can click on a hyperlink and the opening (for example) a Word document or another PDF file on their server. When I started the project, I thought I would create shared links because a single server document will be returned by several links dispersed throughout the InDesign document, that I was building.
In the hyperlink palette dropdown I chose the new hyperlink, then Link To: file in the drop-down list, and I clicked on the hyperlink and then sharing option on OK to close the window. I export the InDesign file to PDF print, and hyperlinks work.
Now, I need to change the paths, because the customer moved their files to a new location. When I re - open the hyperlink in the hyperlink palette by clicking twice on it, change the hyperlink window opens but it shows my link as:
Link to: Destination shared (rather than File)
And the area of destination below shows:
Document: [my name of the document]
Name [the path of the file I put in]
However, this link is not editable. I do not understand why InDesign is doing on its own.
I realize now that it was not necessary to check the shared option when I built the hyperlink. Is there a way (a script? another method?) that I can remove the nature shared hyperlinks so that when I go to change them, they show that links to files (link to: file, no link to: shared Destination) with a live box Destination path where I can change the link?
(If someone tries to help him with a script, note that my document also contains the other hyperlinks to websites and emails that I don't want to bother).
Thank you for your consideration.

Well. I feel kind of bait and switch, but...

I want to get links to the point where double clicking on the name of the (number) hyperlink in the hyperlink palette opens a dialog box change the hyperlink where the destination's link to: file and the path to the file appears in the box path as an editable string. Just the way I had them in the first place.

It is good that you are comfortable the IDML of edition.

If you compare the links made in two ways in the IDML, the only distinction between the Shared and non-shared seems to be the hidden attribute of the tag.

Would have been impossible to change this in Javascript (although you could, I suppose, create a new HyperlinkURLDestination with all the same properties and then chang each hyperlink points to it).

But by changing in the IDML works very well. Open designmap.xml and replace the Hidden = "false" Hidden = "true". Of course, you want to only do that in the tags...

Something about this seems fishy to me, then you want to check yourself in a single case before putting too much effort in. But I think it's good.

Help with shared folders, please

Similar Questions

Steps to reproduce

Maybe you are looking for