help with the new option of memories

Sorry for my English

Please help me with the new option of memories

no memories option appears me

I have an iphone with IOS 10.02 5

Hello

Try this support article > enjoy your memories in pictures - Apple Support

Tags: iPhone

Similar Questions

  • Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES

    Anyone tried the installation with the new Option of software updates?

    I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
    (1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
    (2) make all configurations with YES
    (3) create ASM disks
    (4) install Oracle Database 11.2.0.2 software only
    (5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
    (6) create the RAC (advanced option) with DBCA database

    With these steps:
    Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.

    I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.

    If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?

    Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
    'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »

    I could not find more detailed information on this feature in the documentation and MOS.

    Thank you

    Hello

    You can download the latest updates and patches to help with option - downloadUpdates

    ./runInstaller -downloadUpdates
    

    You can use this note:

    * How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.

    Don't miss...
    * Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
    : Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
    Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999

    Documentation explaining...
    4.5.1 running Oracle Universal Installer
    Download of updates before Installation
    http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH

    Kind regards
    Levi Pereira

  • Windows installed the automatic windows update agent and I would appreciate help with the settings option in this newly installed agent update so no update never install or download unless I choose to do.

    Hello.

    I have windows vista 32 bit home edition.

    Today somehow automatically installed windows ' automatic update agent 747600226

    I always keep my settings to check the updates but let me choose whether to update or install.

    With this new "update automatic agent" which automatically installed on my system, I want to make sure I have place it properly so that it remains in the same way that I always have my settings but two settings (options), he checked, and are confusing for me to know what those checked settings will do.

    I would like to help you with these settings to make sure that the update is still as I want.

    Below chose correctly when the new program installed today.  That's how I still want the settings to be:

    Look for updates but let me choose whether to update or install

    Please let me know if I need to change all the options account required in addition to this update agent to ensure that only, I choose to update or install.

    There are four options and a box is in two and I don't know if I should remove the check marks or not.

    Here are the other four options that I need to know how to configure it so that only I have update/install.

    Once again, the download automatic microsoft today (update automatic agent 7.4.7600.226) without asking for my incentive preset automatic update options and that's what I'm trying to make sure is set correctly so that nothing installs or updates without asking me or let me do.

    Option 1: (this option is checked. If I leave it checked will be it install or warn me only?)

    Give me updates recommended in the way I receive important updates.

    Option 2: (this is not checked and am not worried about this one)

    Allow all users to use installed on this pc.

    Option 3:
    (this is checked and want to know if should uncheck; what I don't want is any what to auto install, but the wording of this option and option 1 are vague because of the "give me " so I don't know what it means or will do.)  If this box is left to it automatically update/install?)

    Give me updates for Microsoft products and looking for new optional microsoft software when I update windows

    Option #4 (this is not checked, and I am not concerned about this).

    See the notification me detailed when new microsoft software is available.

    Thank you very much for your help.

    Take care! :)

    Hello

    The Windows Update automatically updates the updater (himself), regardless of your settings.

    1. Yes it will alert you so you can update or install.

    2. check if you need more of yourself (other users) to be able to select and install the updates.

    3. it will let you know when they become available.

    4. just gives the news of additional details about some of the updates.

    Looks like you're ready for anything you like.

    Rob - bicycle - Mark Twain said it is good.

  • help with the new laptop and elements...

    Hi all...

    I recently bought a copy of 11 items to the disc. I love the program and learn to use it. Here's my dilemma, as I bought the program, I decided to upgrade my laptop.  Currently I am working on a laptop that has a cd/dvd rom. my new laptop with Windows 7 will probably not a cd/dvd drive. My question is... are at - there a way to download my current copy of items on the new hard drive when I don't have a cd/dvd player or do I have to buy a new copy?  The answer will determine what kind of computer, I find myself with. Also, what processor recommend everybody to work with photoediting?

    Thanks for all your help!

    ~ Nancy

    There are resources available for the download items 11 on your new machine.  You will only need to have the serial number of the disc you purchased to activate the software to use fully.

    The Adobe site:

    http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements&loc=us

    A support site:

    You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

    Photoshop/Premiere Elements 11:

    l http://prodesigntools.com/Photoshop-Elements-11-Direct-Download-Links-PSE-Premiere-pre.htm

  • Help with the new Style of Table set in shape?

    I'm having all sorts of problems using the new table style trainer.  I'm not a RoboHelpHTML 8 experts (I better with version 5).  I am trying to create a table with 3 columns, of which the first is aligned to the left, the last 2 are centered.  The header (rank 1) is bold and centered.  Also I want all lines of the same thickness.  I created the table using the standard SimpleGridBlack... Image2.jpg It is actually a line at the top... don't know what happened.  Then I ran WebHelp and the situation was identical to one here.  Then I duplicated the SimpleGridBlack and apply the new style to the table.  Then I started to make changes to the new style.  I chose the first line and made all columns centered and in bold. Image4a.jpg Because I want the columns 2 and 3 to be centered, I then selected columns even for change. Image5a.jpg He took care of column 2.  Then, I chose the last column of change. Image6a.jpg He took care of column 3.  However, the results were not what I expected. Image10.jpg The upload does not quite show the image correctly.  The line under the "gg" is really there and the lines separating columns 1-2 and 2-3 in row 1 are really there.

    Image15.jpgHowever, the first line of column 3 is not centered and lines A-B-C, D-E-F, A-D-G and H-E-B are thicker than the other lines.

    I hope that someone can help you.  It took 2 days and get a website made available for my use to get to the point that I am now.  It is a document that I am out of this week and I have a lot of tables to change.  Thanks for any help.

    Virginia

    8 HR tables are boring to say the least.

    First your alignment problems, you should take a look in the HTML itself to ensure that it is properly applied. The amoun of timers told me to center text and align and the HTML behind comes usually do. To verify here quickly.

    Regarding the double lines that you seem to be around the table, this may help, but I'm not sure that using your styles around them now.

    If you select the table as a whole, right-click right table properties > tab Table > table borders > turn off all borders of the table. Then go to this tab Table > cell borders > set the thickness to be used here, this applies to all round and will give you the lines you want.

    Good luck.

  • ONLY 2 help with the new dimensions of the window

    Hi all

    I need a little help with AS2 when it comes to something other than "drag n drop" scripting. What I would do, is to open a new window of the browser with specific dimensions, but I can't understand it.

    I have currently opens a new window of browser with AS2 following

    on (release) {}
    stopAllSounds();
    getURL (" http://scfvideo.com/video_samples/ryan_cat.html", "_blank");
    }


    Can someone help me to open this window, so it is in a wide browser window 770 pixel?

    Thanks for your help!

    Todd
    Professor of high school Web Design
    www.mrbenrud.com

    http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_14192&sliceId=1

  • Help with the new card mother and Vista problem?

    So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

    b: use linux

    work of the restore cd to reinstall the OS, so I can use my new motherboard?

    So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

    b: use linux

    work of the restore cd to reinstall the OS, so I can use my new motherboard?

    Hey icuhavoc

    are recovery disks to reinstall vista with the original hardware installed if I understand you correctly know what records you need to know a set of manufacturer's recovery disks

    If it is pre-installed this is an oem license and does not change unless you did it in consultation with the manufacturer of models of motherboards and processors

    Walter, the time zone traveller

  • Help with the new graphics card on old pc

    I have a dell dimension 3000 'ya I know sad' I would like to add a graphics card and a new soft power since the wife won't let me buy a new PC GRRRR

    I have a GeForce 6200 PCI 256 MB dcr2 it will work in this pc

    I also bought a power electric double w 480 SATAs is large enough to run the new card and the pc?

    Thank you

    You can add the 6200 PCI if you wish.  It does not require an upgrade of the power supply however.  It will work fine on your PSU 250 watts.  I have the 6200 circulating in a Dell with a 250W unit just to get the higher resolutions than the integrated graphic card has been able to provide in support of a monitor.

  • Need help with the command options of codec C40

    Hello! I plan to buy a few codecs C40 and seller offers me to buy three options for this, but I can't find a description of these options. Seller is not so appropriate as I would like and these options cost a lot. They are here:

    LIC-INTP-C40-DD Option of dual inclusive package C40
    LIC-INTP-C40-SM IntPkg Codec C40, 4Way individual transcoding Multisite
    LIC-INTP-C40-PR IntPkg Codec C40Premium resolution (1080 p/720 p 60) Option

    I found the document with similar options here (table 3), but there is also no description:

    http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11304/ps11312/ps11332/data_sheet_c78-628593_ps11422_Products_Data_Sheet.html

    I think that these options it is me

    one) to use two screens (only two or more?) with C40

    (b) serve as C40 MCU for up to four sites without going through any additional autonomous MCU

    (c) to use video FullHD for videocalls (but I'll buy cameras 1080 p for C40, I need licence also for C40?)

    So, I would ask someone who is familiar with the command of Cisco/Tandberg to describe these options.

    You are actually right on your assumptions and descriptions, you just pretty much what each of these options do listed.

    Dual display-

    C40 has the ability to display the same video on both outputs by default, if you do not get this option.  This option is to display two separate video sources on two screens, such as: Farsite on output 1 and content/selfview on output 2.

    High resolution-

    You might be buying cameras 1080 p but resolution premium will allow you to pass resolutions higher during a call.  You can still view the full HD video when not in a call although if you choose not to get this option.

  • Need help with the storage option.

    Hello!

    I'm new to flash and I'm doing an Anroid application to become familiar with Flex 4.6. This is an overview you can get an idea of what I want to accomplish.

    OK, so the application I am creating is a bike and running tracker. The idea is to follow the distance and the time, but I want to get there with "newspapers." For example; There will be two profiles (for now), one for the race and the other to make the bike, these profiles will have a summary of your information (total operating time and distance). Each profile can contain their respective newspapers (a good example for the representation would be the Google now, cards, each card held a newspaper). Now, every time that you start the activity, you will "create a new journal", this new journal will record the information for this particular 'run' or activity. When finished the log will be stored and stacked with the other papers in their respective type (race or mountain BIKE).

    My questions are:

    • How can I save this information?
    • Should I use a SQL database, if so, how (several tables?)?

    Any other suggestions or advice you can provide will be greatly appreciated.

    Thank you!

    Hello

    As you use AIR (publish to Android) you can use the SQLite database for storage. See http://www.adobe.com/devnet/air/flex/quickstart/articles/simple_sql_database.html

  • Engage with the new Option in Oracle 10g

    Hi Experts,

    Help me understand validation options introduced in Oracle 10 g

    COMMIT TO WAIT WRITING;
    COMMIT SCRIPTURE NOWAIT.
    COMMIT SCRIPTURE BATCH;
    COMMIT IMMEDIATE WRITING;

    Can anyone share these option everything works (Pros & Cons) and when to use this option.

    Although I went through various and below two links are one of them, but still doubts are not clearly properly or provide a specific link that could help dig.

    http://www.Oracle-base.com/articles/10G/commit-10gR2.php
    http://docs.Oracle.com/CD/B19306_01/server.102/b14200/statements_4010.htm

    Thank you
    Dax

    Dax-Oracle wrote:

    Can anyone share these option everything works (advantages & disadvantages) and when should you use this option.
    Although I went through various and below two links are one of them, but still doubts are not clearly properly or provide a specific link that could help dig.

    Oracle manual explains each option fairly well.

    What don't you get no description of these options Manual? You have a specific scenario in mind that you think may warrant not to use by default?

  • Help with the new APEX install

    I'm new to APEX and I try to get the initial installation work.  I have a front end server with WebLogic and Restful Services and a Server backend with oracle 12 c and APEX 5.01.  I've deployed the files ords.war and i.war on the server weblogic and ADR.  I just want to get to the login page.  I tried http://127.0.0.1:8080 / ADR and I get a Web page that displays "ORACLE REST DATA SERVICES" at the top and then you got a 404 error.  In the rest of the data services windows it shows "WARNING: the pool_config view or table is not found in the schema: APEX_LISTENER" ideas that I missed? »»

    Hi, reduction,

    Please provide the following information which will help to report the problem:

    • Oracle APEX retail version
    • Version of Oracle database in detail
    • ADR retail version
    • Version of Java EE application server support detail (if you use one)
    • Version of the JDK detail

    NOTE: Here "Retail" means the major + minor version. For example Application Express 4.2.4.00.08

    For debugging this problem, you face on ADR:

    • Find the folder of configuration of ADR.
    • Enable debug tracing in defaults.xml (if the entry is not there add the entry)
    • Turn on detailed error messages ask in defaults.xml (if the entry is not there add the entry)
    • Start(Re-Start) Oracle Weblogic Server.
    • Go to the URL of the APEX
    • Copy / paste the debug log in the response to the forum. (The error is usually at the end of the paper, paste/fix the whole journal where occurs the first exception)

    About 404 - when setting up ADR 3.0 have you skipped configuration "PL/SQL gateway '? (This step refers to the configuration of Oracle APEX with ADR (APEX_PUBLIC_USER configuration) which is required for the operation of Oracle APEX with ADR)?

    Otherwise, you will run into the following error message:

    Also open your "ords.3.0.1.177.18.02" folder and run the "readme.html" file in a browser and go to the section "404 errors when Oracle configuration REMAINS Data Services" on the causes of 404.

    Kind regards

    Kiran

  • The CAB driver file - help with the new version of driver

    I am populating my MTD drivers with system of cab files and reviews of a few of them show yellow in the State saying there is a new version of Driver at support.Dell.com. I'm still new to this, if it sounds silly. Where is this driver updated exactly and how to import the said pilot in my environment of MDT? I tried to go to the page my OptiPlex model drivers and I do not know if this is where I'm supposed to find it. I downloaded the driver and extract the files. Sometimes it does not work like that; for example drivers chipset allow to extract, there is a setup.exe file that I am looking for the drivers inf on but then I've never had this work. While generally you do, when you see a new driver in the list state of CAB. Here's what I'm looking at: http://en.community.dell.com/techcenter/enterprise-client/w/wiki/5004.optiplex-9020-windows-8-1-driver-cab.aspx

    The yellow dots on the 'Delta' report show which has been updated since the last version of the car.  This does not mean you need to get a new version of the driver.  A full explanation can be found here-> http://en.community.dell.com/techcenter/enterprise-client/w/wiki/4884.driver-cabs-understanding-delta-reports.aspx

  • BlackBerry Smartphones need help with the new sim card

    I don't know why I have such a hard time finding how to do this. It's really making me feel like a * beep * here, so any help will be appreciated

    I'm on Sprint here in the United States and I'm on a trip to Romania in a few weeks and I wanted to have my phone all set up in advance. I bought a prepaid SIM Vodafone Romania, and told me that it is active and active international roaming. I tried it in 2 unlocked bolding my 9930 current and my old 9650. All I get is SOS and emergency calling only, both on AT & T or T-Mobile. I can't yet figure out how to get the phone number attached to the card. What's on the map with that he came are BPUK PIN and PUK. And I can't record with MyVodafone on their website without the phone number. I don't really know how to proceed. I was hoping to use SMS in roaming here until I leave.

    Thanks in advance...

    I was able to get the activated through e-mails with vodafone SIM. Just post here my solution in case anyone has the same problem.

  • Newbie needs help with the new system specs!

    I need to upgrade my system to my work because of the need to begin to use Camtasia and Premiere Pro CS6 (as well as other elements CS6).  I'm not a computer expert and the machine below will be set up for me next week.  I have a few questions that I had grealtly appreciate any feedback on:

    1. Do you think that in general my new system specifications are not enough for basic audio/video editing of SD and HD material?
    2. Can I expect a significant increase in the quality of video playback, as well as a reduction in the time of video rendering while you use Camtasia and Premiere Pro?
    3. Is my diet is going to be enough for the specifications below and if not what is the danger of not leveling who?
    4. If there is some thing/nothing else I had to upgrade what would it be?

    I work for a retail tile distrubtor with about 130 employees.  Training videos, that I create are mostly screenshot simple and basic videos that do not require a TON of high-end editing.  I use a lot of images JPEG high resolution and basic SD video sequences captured from a camcorder Canon GL2 (Mini DV cassettes).  Us will modernize ends up the camera, but that's what I use now.

    The previous computer I had suffered with very choppy video playback and long video rendering times and so I convinced my boss and IT Manager needs an improved system that has a faster processor, a better video card and more RAM.  I used my old system this year and the other takes place next week, is listed below.

    Thanks a TON for anyone who feels inclined to provide information!

    Andrew

    New system:

    HP Compaq Elite 8300

    • Win 7 64 - bit operating system
    • CPU i7-3770
      • 3.4 GHz
      • 8 MB Cache
      • 4 cores
    • Quadro 2000 D (62 watt max current absorbed) graphic card
    • 12 GB of RAM (4 GB statndard, added two other cards of 4 GB)
    • 1 TB SATA hard drive 7200 RPM
    • Intel Q77 Express Chipset
    • 320 watts power (stock)

    Old system:

    HP Compaq 4000 Pro (small size)

    • Win 7 64 - bit operating system
    • Processor Pentium Dual Core E6600
      • 3.06 GHz
      • ? MB Cache
      • 2 carrots
    • NVIDIA NVS 300 Graphics Card
    • 8 GB of RAM (4 GB statndard, added a card of 4 GB more)
    • 457 GB hard drive
    • ? Chipset

    Added CPU, system, a couple of USB devices fans cooler fans, etc.

    I did the calculation with an i7-3770 stock, 3 sticks of RAM, a graphics Quadro 2000, 2 USB, 2 x 120 mm, SATA 2 x 7200 RPM drives fans devices, 1 DVD burner, 30% capacitor aging and a 100% load system and come to this:

    There is no room for manoeuvre for any expansion at all. Not even add more USB devices.

Maybe you are looking for