Help with the problem of data type...

Similar Questions

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• Please help with the problem of Validation

  Recent changes: Yes, had to replace the hard drive of my laptop (I had three years and more)

  When error: when I copy the code returned by the validation tool

  What tool: GenuineCheck.exe (downloaded from http://www.microsoft.com/en-us/download/exe-validation.aspx)

  Windows Update stopped working, too.

  You will appreciate the help.

  RP3456

  Separated by the moderator of this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/validation-tool-gave-me-this-answer/e51e7172-5bc8-42AE-AAB5-7f3c2fc0a166#LastReply

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• help with the problem

  I have two queries that need a feeding table. The problem is that is not having correctly and I can't for the life of understand me how to do this and so any help on this would be greatly appreciated. I tried two different scenarios to get to disposal properly, but I just don't get it.
  
  Here are the two I tried.
  
  First of all, I use two queries, the first gathering of the main information and the second are the comments associated with the data in the first. I tried a basic table layout and the positions of data to the table, but incorrectly. See the link: http://www.hmsims.net/hms/story.cfm
  
  I had to hardcode the comments online to make available to the way I would like that there. So it also does not work as it should.
  
  Second, I used one of the queries to retrieve data from all the tables needed to display. See the link: http://www.hmsims.net/hms/story2.cfm
  
  The problem is that the contract # 6755 VBC has two comments. I only need the data line to show once with all the comments below, and it replicates the data line twice with each comment separately on individual lines.
  
  

  Thank you very much. Worked perfectly.

• Work with the first HP data types?

  I'm trying to get a clear understanding of the data types of HP Premium so that I can better exploit feature internal rather than copy and paste, edit, or having to retype. However, I can't find a tutorial, guide to style "quick start" or comprehensive information on this subject anywhere. Finally, I would like to do things like the following:

  (NOTE: I only list these questions in order to better explain what I'm looking for.) "There ARE no need to answer.)

  • Pass a list of expressions (sometimes solve() returns a list) in a function such as unapply() and run it on each item, rather than interpret the list as parameters
  • Precede the value of formula 1, "Y =" and then save the result in V1
  • Understanding type (x), type (X) and ('X') - I understand that X is a floating point number; x and 'X' they return all two DOM_IDENT, but are in that they also treated the calls function?  Or 'X' becomes X and then treated as a float value?
  • Is there a better way than unapply(), to replace by X-> x to a function, a function of return?
  • For example if: F1 = X-> Sin (x)
  • NOT a function: the seizure of F1 (x) returns the expression: Sin (x)
  • IS a function: unapply entry (F1 (x), x) returns the function: x-> Sin (x)

  Is anyone know if such a guide or tutorial exist, and if so, could you please point me to it?

  Hi!, ETH:

  Try, with...

  (1) www-fourier.ujf-grenoble.fr/ ~parisse/calc/hprime.pdf

  (2) www-fourier.ujf-grenoble.fr/ ~parisse/calc/hprime2.pdf

• Please help with the problem of deployment OTA

  Hello

  I'm trying to deploy my application (for the first time) using a live approach.

  First of all, let me mention that I developed this application using the BB for Eclipse plugin.  It generated files jad and cod.

  I have 5 files of cod and jad for the application, all in a directory on a web server. Apache has been set with the necessary MIME types for jad and cod files.  When I use the browser on the BB to access the jad file, your browser correctly displays the name, Version, vendor, etc. of my application.  But then he said:

  This application requires the following modules, which are not installed:
  {followed by a list of my other 4 modules}

  This is obviously a true statement, but I thought that the jad would cause the BB get these other modules and install them automatically.  It would really suck if my customers had to manually install each of the 5 modules.

  It is therefore possible for the other 4 modules loading is automatic, and how I have to happen?

  Moreover, my OS is 4.2 and my application is written for this OS.

  Thank you
  Paul

  See if this helps:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=25327&query.ID=11...

• pls help with the problem of player

  Hello

  I posted last week, I couldn't open pdf after update of the player.

  After having followed the advice that I received, I uninstalled and reinstalled, accepted the agreement of the user, searched and not found the eula file.  Finally I managed to open the pdf files, however drive either now hangs completely or the blue circle shows updated continuously propagated.

  It appears that there are major problems with the update or I'm doing something completely wrong.

  could someone please suggest a way to solve this problem or a way to get back to my previous version that worked?

  Thank you very much in advance for any help.

  Kind regards

  Andy

  Three things to try - which some have already been given to you in message your last week...

  1. Using Windows Explorer navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement
  2. You can open Adobe Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
  3. It might even be a malware problem; See http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

• Need help with the problem of the form

  I created a web site in a test directory on my domain. It includes 3 forms. all forms work properly.

  I moved the site to a new domain. I have everything flies with filezilla and everything looks good except for the forms. All of them display an error at the top of the page. The message is about the field of the captcha Image verification

  You can see the problem here;

  http://www.telluridegravityworks.com/contact.php

  and here:

  http://www.telluridegravityworks.com/winter-rental-Form1.php

  I used a product called FORMfields for this. I was abel to create what was needed but found a little hard to use FORMfileds. In addition, they do not answer your questions and provide no support at all. I'm stuck out of these forms and need to do their job. I have re-uploaded everything and did everything I could think just shoot this but I can't seem to understand.

  FORMfileds assistance:

  • Configure your facility by filling out the form at http://www.yourdomain.com/FormFields/config.php .
  • Test your installation by going to http://www.yourdomain.com/FormFields/examples/paths/contact_us1.php . You should see a form contact us with fields for the user name, subject and the Message of

  I get the error checking of the Image on the page config.php.

  The "test your installation by going to . http://www.telluridegravityworks.com/FormFields/examples/paths/contact_us1.php . ' load and display correctly. .

  Can anyone offer advice or suggestions on why I am now hhaving this error on 3 forms?

  Thanks in advance for any help.

  Thread moved to the Dreamweaver application development forum, which deals with PHP and other issues aside server.

  markf12 wrote:

  I moved the site to a new domain. I have everything flies with filezilla and everything looks good except for the forms. All of them display an error at the top of the page.

  Here's the first messages of two error on the first page point you to that:

  Warning: session_start() [Function.session - start]:

  Open (/ home/users/web/898/moo.telluridegravitywork/cgi-bin/tmp, /sess_3a796794467996fdecff8703c5826cf1, O_RDWR) failed: no such file or directory (2) in php/hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField on line 52
  
  
  
  Warning: session_start() [Function.session - start]: Cannot send session cookie - headers already sent by (output started/hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField. php:52) in / hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField. php on line 52

  The first message tells you it can't open a file or a directory and gives the name of the file it is trying to open. The second message tells you that the headers have already been sent, and it tells you where production started.

  Read the two locations, and there's a possible clue to the problem. Your script is looking for a temporary on/home/users/web/898 file, while your script is on/hermes/web01/b898.

  Without knowing more about the script you use, it is impossible to solve a problem on the server side. But it seems you need to do something to correct the location of your script uses to store temporary files.

• Need your help with the problem of SWF file swapping

  Hello
  
  I have two SWF Flash files I want to download in the same HTML file. But I would like to load only one at the time and would like to have a button on each Flash SWF file that causes the other SWF to load.
  
  Hmmm... I don't know if I managed to make sense. (: o) I would like to try it once more. (: o) I would like to exchange a SWF file to another SWF file by clicking on the buttons that are placed on the SWF files! : o).
  
  I was wondering if it is possible, or should I think of another way to work around this problem of mine.
  
  Thank you very much for your help and have a great day.
  
  See you soon,.
  
  Babak

  Khoramdin wrote:
  > Hello,
  >
  > I have two SWF Flash files I want to download in the same
  > HTML file. But I would like to load only one at a time and would
  > like to have a button on each Flash SWF file that causes the other SWF to be
  > load.
  >
  > hmmm... I don't know if I managed to make sense. (: o) I would try one more
  > times. (: o) I would like to exchange a SWF file to another SWF file by clicking
  > on the buttons that are placed on the SWF files! : o).

  make a swf as a holder. call the main.fla file main.swf.
  Embed this file in your html document. This button in place of the file with the
  the following measures:

  on (release) {}
  loadMovieNum ("second.swf", 1);
  }

  in this file have a button with the action to load the 3rd file:

  on (release) {}
  loadMovieNum ("3rd.swf", 1);
  }

  by charging them at the same level (1), they replace each other.
  Pretty simple... uh?

  --
  Concerning

  Urami

  --

  Happy new year guys - all the best there is in the 2006 :)

  
  http://www.Flashfugitive.com
  

  
  http://www.Firefox.com
  

• Help with the problem of understanding ip address

  Hello

  Can anyone help me please with this. I grabbed the following to my pix 515e worm (6.2):

  IP address dmz xxx.xxx.210.72 255.255.255.248

  But I got the following response:

  IP and subnet mask can be an invalid pair

  I don't see why this is here. Can someone please explain it to me. I don't see anything wrong with the ip address and the subnet.

  Thank you

  Dan

  Amigo, solve, it's very simple: (courses of subnetting recalled CCNA)

  your subnet mask is 255.255.255.192 (26 decimal)

  The interesting octet in mask is so--> 192

  and--> 64 is interesting byte of the address

  (1) find the magic number, having subtracted:

  256 interesting byte mask-> 256-192 = 64

  (2) find a Multiple of magic number (here: 64) that is less than or equal to interestzing byte of address (also 64).

  Then first Multiple of 64 = 64,

  Then start your work 64 subnets

  1 subnet 255.255.255.64.

  -> Add 64 to find the following subnets: always<>

  2nd 255.255.255.128 subnet

  3rd 255.255.255.192 subnet

  IF YOUR AVAILABLE in 1 subnet IP ADDRESSES are: xxx.xxx.210.65 to: xxx.xxx.210.126

  Don't forget xxx.xxx.210.64 and xxx.xxx.210.127 are not allowed as an IP address (subnet number and dissemination)

  Now, if you want subnets with 8 welcomes everyone, then you solve (2 ^ y - 2 = 8) or (2 ^ y = 10)

  You'll have y = 4

  (because 2 ^ 4 = 16 and 2 ^ 3 = 8 which is unsuffisant)

  Therefore, book 4 bits for subnetting.

  So, your subnet mask is 32-4 = 28 decimal places

  Which means that it is 255.255.255.240

  240 = 128 + 64 + 32 + 16 (2 ^ 7 2 ^ 6 + 2 ^ 5 + 2 ^ 4)

  To find the Ip addresses available for 28, same reasoning as above (the magic number is 16 here)

  For example, they are xxx.xxx.210.65 to xxx.xxx.210.78

  xxx.xxx.210.79 is not allowed (emission) and in

  this case you have 14 addresses available

• Help with the problem of event possible mouseEvent/keyboard

  Hi guys, I have problems with a game I've created now.  The problem seems to lie on the mouse / keyboard event.
  
  Basically I have a character that the player can control using the arrow keys on the keyboard and it works perfectly well on its own.  Whenever the game begins, the player can control the character instantly with the keyboard. Here's the problem now, after that I added another page (in box 1) and created a game start button, keyboard events does not start immediately more.  The player must click on the stage before it works.  Is there a method to solve this problem?
  
  At the present time, here is my page of the Start button.
  
  var start_btn:Start_btn = new Start_btn;
  start_btn.addEventListener (MouseEvent.CLICK, goGame);
  
  function goGame(event:MouseEvent) {}
  gotoAndStop ("game"); The game framework
  this.removeEventListener (MouseEvent.CLICK, goGame);
  }
  
  Here is a code for the actual game part.
  
  stage.addEventListener (KeyboardEvent.KEY_DOWN, keyP resurrected);
  
  function keyPressed (e:KeyboardEvent): void {}
  Code of character... like charcter.x ++ movement, x - etc.
  }
  
  Thanks in advance

  How about you try:

  internship. Focus = stage;

  in goGame().

• Can someone help with the problems of email account? Messages from the console?

  vcyman , March 9, 2016 13:16

  I had ongoing issues with my Mail months including Spindumps and just doesn't look good, so I changed the e-mail settings in the past according to the directives of the ISP, but now the incoming server is grayed out, more it's time to see if my overall situation needs some changes. As I am researching the current issue of the evolution of the e-mail settings, I see the information that can be linked to a larger problem, so I'm including that in a larger context.

  I use my Web site for most of my email accounts and received error messages indicating that the certificate is not valid. I contacted Hostway and learned that they have their own encryption and don't require SSL, but they said Apple mail works best if I use their specific settings instead of those I have. The server settings entering my accounts existing messaging site are shaded out and immutable. What is the best way to make changes without causing more problems?

  I tried to move the mail account plist.to the trash and restart hoping that would disable the accounts but it didi not work. Or I sign out to iCloud and make changes?

  MORE INFORMATION

  In/Library/Application Support / Mail / Online Account Types/com.apple.updated.mailaccounts/MailAccounts.plist, the Account.plist includes an e-mail account which is Ameritech and not logged into my site.

  in Library/Mail/it is V2 and V3. V2 is V2/MailData/Accounts.plist. V3 contains no Accounts.plist. in MailData. I printed the Accounts.plist. and there are 22 pages of data. Each e-mail account is repeated at least three times and it seems connected to the when I made changes to the account settings in the past.

  This may be related to a larger problem because I have error messages related to the e-mail in the console.

  09/03/16 12:05:22.644 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM DCs [365]: securityd_xpc_dictionary_handler cloudd [429] copy_matching error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.649 PM Mail [634]: cannot load the draft for documentID: C265D900-C6A3-48B9-AF60-C83FE29A7AED

  09/03/16 12:05:22.705 PM Mail [634]: cannot load the draft for documentID: E1D3029B-C2BF-425E-8F67-32C190B420CF

  09/03/16 12:05:23.142 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.144 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.417 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.432 PM]: looking for iCDP status IDDM 61149625 (checkWithServer = 0)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: error XPC while checking if iCDP is enabled for IDDM 61149625: error Domain = NSCocoaErrorDomain Code = 4099 "the connection to the service named com.apple.cdp.daemon was invalid." UserInfo = {NSDebugDescription = the connection to the service named com.apple.cdp.daemon has been invalidated.}

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: connection Daemon invalidated!

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.436 PM]: [AOSAccounts]: [__49-[ACAccountStore (iCloudAccount) icaAppleAccounts] _block_invoke]: accountsWithAccountType returned the error: Domain = com.apple.accounts error Code = 9 '(null) '.

  09/03/16 12:05:23.446 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.716 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:24.076 PM sandboxd [139]: com.apple.Addres (501) ([501]) deny com.apple.cdp.daemon mach-search

  09/03/16 12:05:24.626 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: key :-25300

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: status: power off

  09/03/16 12:49:52.821 PM Mail [634]: * the Assertion failure in French-[IMAPParseContext _parseStatusResponse], /Library/Caches/com.apple.xbs/Sources/Mail/Mail-3112/IMAP/Connection/Responses/ IMAPParseContext.m:956

  09/03/16 12:49:52.821 PM Mail [634]: exception IMAP response analysis: tried to parse a response from status without knowing the separator character.

  I'd appreciate any suggestions.

  Is your IMAP account?

  You have stored messages slot "on my Mac"?

  If create you your account in a new user, it works correctly?  (see below)

  See my answer in a similar debate. Let me know if you need more assistance.

  Re: The first time to open Mail.app: opens the window Import Mail Message - crashes during the infinite-import cycle how to break it?

  Re: Certificate error. When the message appears you must choose "see the certificate", then select "always Trust ' in keychain."

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Place in the new user by logging in under the Apple in the menu bar.

  Log in to the new user.

  You can skip the connection with an Apple ID, unless you want to test an iCloud account. Select continue, then jump.

  Open Mail and add your account. If it's a POP account, make sure that you do not select "remove copy from server after retrieving a message," on the Advanced tab.

  

  You still see the issue?

• help with the problem of font size on PSE7

  I'm typing on an image in PS Elements 7.  Even when I select a font size of 72 pts., the type is under the microscope on the image.  What I am doing wrong?   Switching points, mm, cm or inches does not affect this problem.   Thanks for any help.

  Remember that the size of the characters depends on the resolution of the photo. 72 pt type is big on the picture at 72 dpi, tiny on a picture at 300 ppi. Just keep trying more large sizes. You can type in any size you want; you are not limited to the menu presets.

• Please help with the problem of driver SAS S10 6483

  I'm going crazy and I hope someone here can help.

  I am trying to load Windows 7 on a 6483 S10 which has a SAS hard drive.

  During installation, the system does not see the drive and ask for a driver.

  I can't find a SAS driver for windos 7 anywhere.

  Can someone help me understand this?

  Thank you!

  Bill

  Thanks, Erik

  It turns out that when I opened the box, it doesn't have a SAS drive, as I said.

  She and its a SATA drive or the computer is defective. IF its of not coming back.

  I was also told that Windows 7 will not work with it that seems hard to believe.

  I was led on a chase of wild goose by the seller.

  Thanks for your help.

• Im having trouble with my wireless setting can anyone help with the problem?

  Hi my name is Lloyd and im having problems connecting with my wireless network and need help to understand my problem

  1. http://Windows.Microsoft.com/en-AU/Windows7/setting-up-a-wireless-network
  2. http://Windows.Microsoft.com/en-AU/Windows7/view-and-connect-to-available-wireless-networks
  3. http://www.7tutorials.com/how-connect-wireless-networks