Help with the startup problem. Start load page never stops

This morning, I found a window on my PC (vista home prem SP 3) who said he had a problem with my departure upward. And that characteristic fixed departure could not fix it. I tried to restart my PC and he had charge green/starrt infinite loading bar. I tried to start in safe mode, but can apparently do not have start that is. I grabbed my system recovery DVD, tried to have either boot with the DVD or are looking for a repair-start feature. But when I try to start from the DVD he wants to restore then only of factorry. Did I miss something there at - it something I can do? I don't want to do a restore with since I have given, I don't want to lose and he's going to take me with all my software and udates about 1 week at least for good install and configure my PC.

Hi Henry,.

·         What is the exact error you see on the screen?

·         You did changes to the computer before the show?

Check to see if the following is useful.

 

Method 1: Remove non-essential external devices and reboot the computer.

Method 2: Repair of the boot from WinRE (Windows Recovery Environment) mode. Follow the article mentioned below, to do.

Startup Repair: frequently asked questions

See also:

What to do if Windows does not start correctly

Tags: Windows

Similar Questions

  • Need help with the huge problem of first Pro Photo. Confused beyond belief.

    Ladies and gentlemen, I've been at this for two days and am desperately needing help. At the moment my editing in Premiere Pro is completely blocked because of a bizzare picture problem. I am 100% glued and impossible to change.

    When I add a picture of my bin, it's ok. Then I add a second and it seems fine. But all the photos I add after this show as the first image. Never forget that the name of the file appears correct.

    The image itself, as well the thumbnail and the image in the timeline, etc. are just the first image.

    I restarted, rebooted, started new projects with new settings, cleared the cache first Pro... Nothing works.

    Video is not a problem. Only images. And now I'm dead in the water as a result.

    Look at this screenshot. See how the other as the second picture they are all the same? Well, they shouldn't be. But they are. And I'm stuck and cannot change at all as well.

    WTH is going on here?

    I have Premiere Pro 5 on a PC from Adobe Production Premium.

    Is a question I've had recently in the middle of editing that Premiere Pro will start in line video that has already been fulfilled previously.

    Begging for help here.

    Image1.jpg

    Since you have never had this problem with image files

    in before cs5, I'd be inclined to turn to the source

    images that caused this problem to emerge

    If I remember correctly this problem, it has to do with the

    "image" header written to image files,

    and it also seems that the problem was unique to the .jpg images

    first merges by header information and duplicate images

    Open in ps and resave images re-written the header information

    for a State that is correctly read by first

    HAHAHAHAHAHAHAHAHAHAHA!

  • Need urgent help with the startup of the database

    Hi all

    I use oracle 10g on 32 bits of windower server.

    I try to start my database today and it gives me error, and that's my production database.
    I need very urgent help you. (I have no rman backup, and data are not n6cessoires so, since it is the practice of the student).
    SQL> startup open
    ORACLE instance started.
    
    Total System Global Area  524288000 bytes
    Fixed Size                   790180 bytes
    Variable Size             250343772 bytes
    Database Buffers          272629760 bytes
    Redo Buffers                 524288 bytes
    Database mounted.
    ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY'
    ORA-01115: IO error reading block from file 34 (block # 1)
    ORA-27070: async read/write failed
    OSD-04016: Error queuing an asynchronous I/O request.
    O/S-Error: (OS 23) Data error (cyclic redundancy check).
    Kind regards.

    Maahjoor wrote:
    Hi dear,

    I need further assistance on your side, I restarted the server, but the same problem.
    as there is a way to drop and re-create a system tablespace? given that the 34 file belong to the tablesapce system.

    concerning

    N °
    So just create a new database. Who will have every ten minutes. And to say that your students to create new storage spaces. Who will be the two minutes.

  • Need help with the printer problem.

    * - Original title - help

    Why can I send pictures via bluetooth for continuous printer asking me a code years samsung knows anything about can any 1 hepl

    Hi Patrick,

    1. What is the brand and model of the printer?

    2. What is the exact message that you get when trying to print?

    3. don't you make changes to the computer and the printer prior to this problem?

    We can refer to this article and check if that helps.

    This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

    Response with the State of the question and we will be happy to offer you our help.

  • Please help with the DNS problem in VMware Workstation 6.0.2

    I have 3 servers Configuration of VMware Workstation. There are a the Ethernet parameters ' host only: a private netwrok shared with the host country. The problem is I have a server configured as a main domain controller, I can join my other two servers to the domain very well, I can ping by name, but none NSLOOKUP. Basically I have a DNS issue that I MUST correct.

    Anyone know what could be the problem? Or where to look? I attach a doc with my settings.

    Thanks in advance.

    Have you checked that the clients are configured to register in DNS?

    Have you checked the the event log for entries regarding a DNS record failed?

    Did you check that there is a records for each host in the appropriate DNS zone?

    The clients have the right DNS server configured?

    If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

    AWo

    VCP / vEXPERT 2009

    Published by AWo

  • HP p6-2464eo with the startup problem!

    Hello!

    I read somewhere this problem s with usb 3.0 to start from, but with my computer is usb 2.0, a problem also.

    It s works fine when the computer is operational in the running, but I want to change my hard drive and I give up soon!

    I tried to make changes in the bios, which can help the Don t at all.

    Anders

    I think you must disable secure boot and select mode in the BIOS to boot from a drive flash, DVD, or USB.

    Step 1 in the above link.

    Then follow the instructions in step 2 to select the desired legacy boot device.

  • Need help with the Windows Vista Start Menu

    So, I turned on my computer today and clicked on the start menu, I expanded the tab all programs and was shocked to see that it was empty. Tab Assecories, Extras and upgrades, games, all of them, all tabs have disappeared. Is any way to restore? I don't know how to get to the Defrag disk or cleaning disc or one of these things without it. Help, please!

    -Tim

    A plus for you to try.

    It still happens today. Yes?

    Why not do a system restore.

    Choose 2 days ago, or a date then your list of all the programs worked as your restore point.

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  • Please help with the problems of Vista SP2

    So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

    I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

    I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

    The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

    I tried to stop and restart all services BITS, etc. no luck.

    I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

    Help, please... I'm hopelessly lost and can not spend more money on this thing.

    Thank you!

    If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

  • java.sql.SQLException: problems with the native/lack of loading methods library

    Hi all

    Please let me know how to fix the exception "java.sql.SQLException: problems with the native/lack of loading methods library: no ttJdbc in java.library.path".

    Thank you
    Prabhu

    Published by: Nina Prabhu on November 20, 2012 02:12

    Hi Prabhu,

    Probably, you must specify the LD_LIBRARY_PATH variable. Like the following:

    export LD_LIBRARY_PATH=$TIMESTEN_HOME/ttoracle_home/instantclient_11_1
    

    Best regards
    Gennady

  • Need help with the launching track pack for forza code 4

    Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

    This is the help I get when the cat to an Ambassador xbox on xbox.com

    Terry wrote:
    Need help with the launching track pack for forza code 4
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
    The Xbox Ambassador says:
    Hello
    Terry wrote:
    Hello
    The Xbox Ambassador says:
    Hey
    Terry wrote:
    just to be on the phone to xbox live support and was told to come here
    The Xbox Ambassador says:
    ok\
    The Xbox Ambassador says:
    What is your problem?
    Terry wrote:
    I bought the 4 for forza ansd 360 new sealed Christmas...
    Terry wrote:
    has got 2 codes that accompanies the game but the pack track code does not work
    The Xbox Ambassador says:
    Wow good
    Terry wrote:
    whenever I put in the code it says code redeemed
    The Xbox Ambassador says:
    I think the code is used. You must return to the retailer
    Terry wrote:
    I tried to, but since I already opened the case they will not accept
    The Xbox Ambassador says:
    Oh. No,
    Terry wrote:
    the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
    The Xbox Ambassador says:
    Maybe it was auto bought?
    Terry wrote:
    so, how do I get another code generated track Pack if defective?
    The Xbox Ambassador says:
    I do not know.
    Terry wrote:
    bought the game new, so I get the track pack
    The Xbox Ambassador says:
    Oh. It's bad.
    The Xbox Ambassador says:
    I think that if you Exchange 1 code it will buy it
    Terry wrote:
    car pack code worked, starter pack did not work
    The Xbox Ambassador says:
    Oh.
    The Xbox Ambassador says:
    It's a bad
    The Xbox Ambassador says:
    BTW you have an evolution of the tests?
    Terry wrote:
    Yes, I want to? but more anxious to get a code object generated for this pack
    The Xbox Ambassador says:
    Hey if I help can u give me this game too?
    Terry wrote:
    ?????????????????
    Terry wrote:
    So is it possible to get a code for that time?
    The Xbox Ambassador says:
    Hey
    The Xbox Ambassador says:
    Yes.
    The Xbox Ambassador says:
    you need to contact them
    The Xbox Ambassador says:
    and tell them that the code is used.
    Terry wrote:
    I was told to come here? where can I go to get the code?

    Hi Terryg76,

    ·         What version of the operating system is installed on the computer?

    I suggest you to contact the game manufacturer for more help and information.

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

    * Original title: start Windows 7

    I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

    Probably yes it is damaged in the case otherwise he would start.

  • Need help with the data storage store, local array and network connections

    Need help with my ESXi 4.1 installation

    My hardware:

    I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

    The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

    I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

    My Situation:

    I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

    Help with the data store and network:

    I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

    I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

    Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

    I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

    Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

    You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

    Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

    RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

    You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

    Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

    UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

  • I need help with the control of two .swf in third.

    Hi, thanks for reading!

    I need help with the control of two .swf in third.

    I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.

    The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.

    What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.

    I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.

    var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
    var mcLoader:MovieClipLoader = new MovieClipLoader();
    mcLoader.addListener (this);
    mcLoader.loadClip ("MCIC.swf", container);

    function onLoadInit(mc:MovieClip) {}
    mc.gotoAndPlay (14);
    }

    But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.

    Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.

    http://www.axiscc.com/temp/HCIC.zip

    What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.

    I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.

    ActionScripting is far from my point hard, so I'm definitely over my head here.

    Thanks for your help.

    Got my solution on another forum.

    http://www.ActionScript.org/forums/showthread.php3?t=146827

  • Hello need help with the opacity mask.

    Hello need help with the opacity mask. I hope someone out there can help

    I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

    However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

    The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

    The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.

    Screen Shot 2015-08-06 at 12.26.48.pngScreen Shot 2015-08-06 at 12.00.10.pngScreen Shot 2015-08-06 at 12.01.16.png

    The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

    Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

    What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

    The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

    Screen Shot 2015-08-06 at 12.44.21.pngScreen Shot 2015-08-06 at 12.44.36.png

    I hope someone can help. Very appreciated


    See you soon

    Dave

    Dave,

    I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

    Illustrator help | Transparency and blending modes

    represents the masking objects.

    Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

    I think that it is perhaps the issue.

Maybe you are looking for

  • Firefox desktop icon

    Recently my desktop for firefox icon changed not by me. Is - is this legitimate?

  • Please can someone help me for a long time out of the payment itun

    Please can someone help me for a long time out of the payment of itun, I lost my phone. This is my information **** **** Thank you < personal information under the direction of the host >

  • Manual

    Hi, just bought Touchsmart 310 PC. No manual outside 2 pictorial pages set up. I need something that shows the keyboard & the rear and sides of the PC I know what all the different 'holes' are for (you know, what to plug). Can someone please.

  • C8180 Photo printing

    I have a Photosmart C8180 printer that does a good job of printing photos except that it prints an image cropped in spite of the fact that I have already cultivated the image to the exact size that paper is.  It's frustrating crop an image with adequ

  • Actiavtion key in use

    I reinstalled my windows vista on my computer and when I try to activate windows now it says actiavtion key is used. What can I do