helps connect to the NIST NTP server on port 123

Similar Questions

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• verification failed - there was a connection to the Apple ID server error?

  I am signing in iCloud, but whenever I try, a message appears saying: "check failed, there was a connection to the Apple ID server error" I can't use all the apps, and I tried to restore my iPad and reset my network settings and nothing works. Help, please!

  Try to connect to iTunes and insert it again (I know you talk about audit iCloud, but the signature of and then back into iTunes will ensure that the password that is stored on your device for your ID Apple is correct: settings > iTunes, select Apple ID, click on Sign Out, and then sign.)

  See you soon,.

  GB

• Apple TV 4th generation "audit failed there is a connection to the Apple ID server error."

  Can Hello someone please help me?

  I have a 4th generation Apple TV and I can't seem to accept my apple ID and password.

  That's what I've done so far:

  Chosen English (United Kingdom)

  Chosen UK

  Tried to associate a device with the establishment (iPhone 6s)

  Has no more than 10 times, even if the password is correct

  Error message that appears is "audit failed there is a connection to the Apple ID server error."

  Tried the manual log, same error message.

  Tried the manual paper but this time I skipped the Apple ID Login, to see if I could connect via iCloud and ITunes manually in the menu, same error message appeared.

  It recognize my wifi, so this isn't a problem. Restored to factory settings.

  Connected on my computer apple laptop not and connected on iTunes Music store to enter the password and verified it was OK, write down each letter/number, I typed the.

  Tried to pair the device several times over, has kept getting the same error message. The manual bit once again, same error, again restored factory settings.

  Went on my iTunes on my phone account and disconnected, and then reconnected in.

  Tried to pair the device several times with the same result.

  Tried to do the manual setting over 15 times. Same mistake. Restored the factory settings once again.

  Changed my password for my iPhone and laptop updated Apple.

  Because the Apple TV is now connected to my wifi that he decided to do an update. I waited 15 minutes for this, so I could try to use my new password for apple now.

  Tried to pair the device again. Still getting the same error message.

  Why is it so difficult? What I'm doing wrong here? I did this for 2.5hrs now. Can someone help me please?

  You are in the United Kingdom

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• Connection with the Apple ID server problem

  iCloud on my ASUS ZENBOOK can not connect.  It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.

  My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.

  Key points:

  (1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10.  (Confirms that it is not a problem of "User" with me trying to use the wrong password).

  (2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.

  (3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia).  [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].

  (4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.

  (5) I uninstalled iCloudand reinstalled from a new download.  Did not help.

  (6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers.  I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.

  Suggestions as to best 'next steps', I can take would be highly appreciated...

  I have exactly the same problem... is there any help for us?

  So far, I've been forced to use Windows 7

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Trying to activate Windows XP but I get messages saying that I can not connect to the Microsoft Activation Server.

  Software loaded, computer rebooted, selected activate over the internet (internet works), entry of information required (US) and subject - receipt cannot connect to the Microsoft activation server. tried to activiate telephone (not then given telephone number I looked on internet) called tech support and they can not activate by phone and referred me to this site.

  original title: unable to activiate microsoft xp professional

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.

  I received an email indicating that HP does not show me as having all printers which explains why I have not received information of driver update I guess.  But when I typed in HP4500 G510, I received the following error message:

  Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.

  And since I don't know beans about computers, I don't have any idea what it means.

  Because I had to pick a topic, I chose the one above, but no other choices were nowhere near cover.

  Hi mac64.
  I understand you are trying to register for updates for your Officejet 4500. I can certainly help you with this.

  I'll give you a link to try to register for driver updates. Please let me know if it's the same link you used and if this works differently for you, simply click on the following link: the HP driver updates.

  Hope to hear from you soon

• BlackBerry Smartphones Blackberry does not connect to the blackberry World Server

  Hello

  I have a BB9780. I got it as a set of second hand.

  My service provider is Vodacom SA and I propose a package of BIS with them, they confirm that my package of their side has no problem.

  I tried all the tips I've read on this Forum and still nothing helps.

  I enter the BB app world and it tells me that 'Blackberry cannot connect to the blackberry world server.

  Again this is not the side of my carrier form since they confirm that my package is open and usable.

  I can get Temp to the BB app world via WiFi but lose the connection, and this isn't my WiFi as my laptop is still online when I am offline

  Help, please

  Ok. Do not worry about the BES... This is Blackberry Enterprise Service and only for use by businesses. The setting we use is BIS... Blackberry Internet services. Unfortunately many networks will tell users that their BIS is connected when they did not. My advice is to ring the network, tell them where you looked, in the State. She shows very clearly your BIS is not connected and ask them to connect

• You are not currently connected to the Oracle BI server

  Hi I am facing problem while that connection in the page of answers... Here is the message I get... Please someone help, what could be the matter, thank you

  	You are not currently connected to the Oracle BI server. If you have already logged in, your login may have expired, or a communication or a server error occurred. To reconnect, click here. If the problem persists, please contact the site administrator. »

  Hi Ram,

  My question was resolved, it happened because of OPMN services are low.

• ADF / integration OBIEE: unable to connect to the presentation BI server

  Hello
  Using JDeveloper 11.1.1.6, I created an ADF application to test its integration with OBIEE 11.1.1.6. The request contains the jsf page that holds the OBIEE dashboard. Next, OBIEE, I created impersonate user. When I run this application on Weblogic Server built-in, it shows dashboard OBIEE perfectly. But when I deploy the application on weblogic OBIEE server, deployed with success but shows following error when we try to access the application via a URL.
  
  Unable to connect to the presentation BI server. Please ensure that it is running, configured correctly, and that the details of the connection in this application is accurate. Please check the log file for more details.
  
  (Http) connection works very well when check it out us inside the app. Can you please help how to solve this problem?

  Hello
  Bad news.

  How did you create the connection? In the resource Palette?

  I noticed that I have to drag the connection in the connections of Application resources (if it is not present), I have to uncheck in the properties/deployment of applications 'Powers' and cancel the deployment of the application and redeploy with JDEV (or em)

  This connection is really not clear in my mind

• my iphone says verifivstion failed there is a connection to the apple id Server error

  my iphone says verification failed there is a connection to the apple id Server error

  What are you trying to do when you get this error? Sign in settings/iCloud?

• You will need to plug Sony IEEE 1394 camcorder to an iMac. It would connect to the thunderbolt via an adapter port? I have a cable of firewire 800 and wanting to know how to get the video of my iMac. Thanks for any help you can give :)

  I borrowed a camcorder tape Sony that has an IEEE 1394 (ilink Sony) and eager to download video from my iMac.

  It would connect to the thunderbolt via an adapter port?

  I have a cable of firewire 800 and wanting to know how to get the video from my iMac via this cable.

  Appreciate any help you can give :)

  You want a Thunderbolt Apple FireWire adapter. Here is a link (to the US store):

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r? FNODE = 8 b & fs = f % 3Dadapter % 26fh %3 D 4595% 252B45b0

  Sorry, I don't know what software you need to play your video, once you get the cable work.