Heres is now one for the experts!

Similar Questions

• Heres one for the experts nsz - gs7

  After having been a "WD" guy for a long time, I decided to make a change and bought the nsz - gs7. I must say that I am very happy with it.

  I was able to easily beat the limit of 2 TB disks hard usb and attached 2-3 to record to my unit.

  But here's my problem, how to 'see' my hard drives from my computer windows laptop? Now I have to unplug my drive hard usb Sony nsz - gs7 and hang it in my laptop to add multimedia elements.

  With the WD, I was able to move the contents of a disc on drive and my laptop to one of the readers.

  Any help with this would be greatlt appreciated.

  Thank you

  Michael

  Emmm, well too bad, and thanks for the quick replies.

• try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• MAC OS Yosemite - CS6 - earlier, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's all

  -At the time, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's a window without having to be full screen mode? I managed to go a few times like this, but right now it's really annoying me. Help!

  

  Just drag the small window up just under the toolbar, you will see the area highlighted, and when you drop the file should anchor.

• The last IOS 9.3.1 is now safe for the users of IPad 2 GSM?  I don't want horrible IOS 9.3 activation problems recur everywhere.

  The last IOS 9.3.1 is now safe for the users of IPad 2 (GSM) download and install?  I don't want the horrible fiasco of activation IOS 9.3 reproduce anywhere!

  Yes, you can upgrade to iOS 9.3.1.

• I just bought a Canon 7 d, Mark II, new DellXPS and 5.2 of Lightroom.  The Lighthouse is not open the 7DMark II, but opens the older 7 d that I imported.  I checked the update of the home page and do not see one for the 7 5 d Mark II.  Please say what t

  I just bought a Canon 7 d, Mark II, new DellXPS and 5.2 of Lightroom.  The Lighthouse is not open the 7DMark II, but opens the older 7 d that I imported.  I checked the update of the home page and do not see one for the 7 5 d Mark II.  Please that's where - otherwise what.  I'm "waiting until what his doing."  Thank you.

  Upgrade to the current version, which is Lightroom 5.7.1. You can do it from the Lightroom Help menu and choose updates.

• A few questions for the experts

  I have observed the reason why I do not understand:

  1. What is the purpose of the Main () function ?
     • It is simply a wrapper around the original substance?
     • I guess that global definitions must always precede it.
  2. Examples of Adobe (for example SnpCreateDialog) use the form
     • SnpCreateDialog.prototype.run = function() {...}
     • rather than simply the function SnpCreateDialog () {...}
     • What is the logic behind this?
  3. I also found one that some Unicode characters are not allowed in the comments to a script of UTF - 8 encoded. In my long-running script (now > 1000 lines) I need a regular expression in the editor to find the culprit: [^ \p{L}\p{N}\p{P}\s\$\<\> = +------^]

  goRtfDoc.Close... / / must be postponed to preserve the ¶ - ID

  This creates the error

  Error message: character conversion error
  Script, line #: H:\Adobe\framemaker.12en\AdobeFrameMaker12\6, 0

  The ¶ symbol by substituting the word paragraph corrected the error.

  = > is there a list of "unallowed" characters or vice versa, a list of characters (also for string constants?).

  Hi Klaus,

  I'm not an expert, but I can answer a few questions, I think.

  I'm not sure that a main() function is very important in JavaScript, which analyzes and runs to a large extent of procedural way. It is important for the standalone executable program (exe), because when you run a program, the operating system environment or the runtime needs to know where to start. For example, an archive executable Java must have a main() function, because this is the norm for the JRE to know which function/method to run first when the program is launched. If you see it in JavaScript, it could just be there as a general convention question of programmers appreciate general conventions. -WARNING - I don't know for sure that's true.

  I think that global variables may appear anywhere outside the functions in JavaScript, even though I think it is certainly preferable to declare before all the functions that use.

  The prototype company is a technique to add a method to the underlying of the object type, such that all objects of this type can invoke it later. In your example, I suppose that if you do this...

  var kdaubesDialog = new SnpCreateDialog();

  Then, you could do this with your object:

  kdaubesDialog.run ();

  For more information, see JavaScript Prototypes.

  Regarding the problem of unicode, I think there may be some bugs in the application ARE. Also, I came across this problem when some character (or sequence of characters maybe) caused it just freeze. I forgot which character he was, but once I me am rid of him, things has worked. Maybe there's a standard JavaScript to do this, but I'm not aware of it.

  I hope this helps.

  Russ

• Question for the experts: SVG vs GIF

  Hello everyone

  Lets say I have a website that is filled with a variety of simple and complex, smooth white icons. These icons will be resized in muse where necessary, sometimes they will be with reduced opacity. The site is heavy on Parallax scrolling and fading (opacity) and most - if not all - of the icons will use one or two scroll effects.

  Exporting since illustrator GIFs are sometimes smaller in size than the SVG.

  The target audience is supposed to be decent and updated computers for example, IE 8 and below not relevant. Assume that all users have a browser able to handle SVG and parallax.

  What is better or easier for the browser? SVG of GIFs? even if the size of the GIFs is reduced?

  renders SVG quite complex (several anchor points) 'harder' than the GIF?

  No reason to prefer not SVG except for worms backward compatibility with older browsers/machines?

  What would be the best practice here?

  Any discussion/advice greatly appreciated.

  Jorge Vallejo

  First, GIF should be avoided in favour of PNG: a well optimized PNG is always smaller in file size and also offers several options of quality (for example more than 256 colors which allows to GIF). The problem is that Adobe products cannot achieve this without jumping through a LOT of hoops. More information below.

  This is a bitmap - SVG performance comparison:

  (1) SVG files should be drawn & rendered in the browser. This means that the xml data must be read, interpreted and displays - which is much slower than a bitmap. A png must still be uncompressed, which does not take a lot of processing power. Make an SVG, it is much slower (incomparably slower depending on the complexity).

  (2) bitmaps are usually hardware accelerated (via the GPU), a number of operations of svg is not. For example, I believe that css transforms for SVG is not hardware accelerated and so very slow animate with this method.

  (3) some old browsers have trouble made a lot of individual objects of SVG. For example, only in March 2014 this problem was solved in Firefox.

  (4) svg performance depends heavily on the specific browser as well. Take this test:

  http://jsperf.com/D3-SVG-opacity

  It runs faster on opera and IE 11 on my system! Firefox is terribly slow.

  (5) the SVG rendering is much slower on mobile platforms. Unless very simple, convert png files.

  Now, regarding your files: a size to 500Ko SVG is a LOT - and then you mention that you will have more files SVG from less then 100 KB up to more than 200 KB. My question would be what kind of chart, they will be on your page: background graphics, icons,...?

  In addition, SVG images produced by the Illustrator can (should) be optimized. A good tool for this is SVGO: svg/svgo · GitHub a Visual version can be downloaded at svgo/svg-gui · GitHub

  A few items must read:

  http://CSS-tricks.com/using-SVG/

  http://jaydenseric.com/blog/how-to-optimize-SVG

  http://kylefoster.me/SVG-slides/#/

  If you do a lot of animation, and there are a lot of other things happening in a page, then PNG is the way to go. SVG is preferable for icons and graphics simple logo. Developers of games using Flash always convert all their vector files into bitmaps for much better in Flash!

  Now to my second point: Adobe Save for Web function is catastrophic for the optimization of png. Yes, there are Photoshop techniques to improve optimization of PNG images, but it takes a lot of effort:

  http://www.smashingmagazine.com/2009/07/15/clever-PNG-optimization-techniques/

  PNG Optimization Guide: more intelligent Techniques - Smashing Magazine

  And even after all that work, again, you cannot export a PNG image with a color palette limited with total transparency in Photoshop or Illustrator. It is important for the size of files: especially Muse Web sites tend to be so inflated that they take a lot of time to load up - and there's really no reason for this if you optimize your graphics properly.

  To optimize PNG files, use the quantifier of color:

  Color quantization

  I can't live without this small tool (freeware) - you have to start up your mac in Windows mode just to use CQ to optimize your png files. It supports automatically optimize your png files, reducing to a minimum - compared with the standard backup of Photoshop for the Web disaster, files are at least 50% smaller file size or more. And it includes a very simple to use quality mask brush that allows areas of control/fix which can be annoying when the reduction of the number of colors.

  That said, it really depends on the type of chart, that you intend to put at your disposal. Could you post some examples?

• Think about making one for the voice recording...

  I've heard great things about the new Sansa Clip +. However, I got a Sansa Express before. It was so horrible, it makes me a little skeptical on the Clip +. One of the most horrible attributes of the Express was the refresh database which came he started, taking over 7 minutes, if it didn't cut itself automatically to every time (I had to click a button to keep it close). But before all the music. For some strange reason, he would play only half of my music. Perhaps the tags have been stripped, very well. But he should be able to play without worrying, because it worked on my computer and other mp3 players.

  Sorry for snapping, but I am in desperate need of an mp3 player. I'm quite the cheap fellow; I also need a digital voice recorder voice that will work in 10-15 (never passed 20) feet. I have an old burner, but it is a consumer of battery. I can not connect to my PC.

  Now, on the mp3 player, it looks like the clip + has firmware similar to that of the Express, but cleaner and better. I saw the review and startup does not seem to be problamatic. However, I leave again I tested the voice recorder on my Express to a 15 ft. He picked up a bit of noise, but I had to max volume out to distinguish what has been recorded (which I couldn't still do).

  I really want the clip to be all around the device, I need, but he would need to work sufficiently to 15feet. I've heard so many comments, but virtually nothing about its features shortly. I really want to do, but Sansa has already failed me once...

  Hello Soy. You don't like how I answered your questions on the ABI plateau? Also, I'm very cheap, but decided to splurge on a Clip + even though I already had a rocket and a Clip. To be quite honest with you, voice recording is the function of quality lowest on the Clip + Clip and Fuze.

  I just tried to save it to my Clip + voice. I just tried two records in the sample. With the player only about 4 feet away, she picked up a lot of noise from a fan in the room. IMO to about 15 feet below the record would probably unintelligible if there is a fan noise or other noises in the room. The speech on the video recorder + works best at short distance from the speaker. Cut out from the rear of the speaker, it can make acceptable recordings.

  It is doubtful that you would get a great record with any player of mp3 of 15-20 feet away. The recorder I've mentioned, Member of the Board can be set to be very directional, but despite this, 15-20 feet away would be a mistake to get a decent record.

• BlackBerry Smartphones last one for the day - Media Player?

  Sorry about that but I have another question - I synced a few of my itunes playlists on the map and I can see and play the songs on playlists, but I can't understand for the life of me how to to move to the next song to unlock my phone, go back to the media player and then manually choose move to the next song. Isn't there a shortcut key or cant I double click on my headphones as I do with my iphone? Or am I the only one blackberry user suffering of TDA who likes to jump through their playlists sometimes?

  Here you go (from the online manual):

  Media shortcuts

  According to language hits input you are using, some shortcuts may not be available.

  Audio and video files

  • To stop an audio or video file, press the Mute button on the top of your BlackBerry® device.
  • To resume playback of an audio or video file, press the Mute button again.
  • To play the next song, press Volume to the top on the right side of your device.
  • To play the previous song, press on and press and hold the Volume down on the right side of your device.

  If you are using a headset, to activate audio boost to amplify the volume for songs, ring tones, and videos, press the Volume button upwards until you reach the highest volume setting, then press the Volume Up key four times quickly.

• A Question for the Experts of the SAMS

  Hello
  
  Version Oracle 10.2.0.4
  16 k block size
  I have a managed tablespace locally, with volume of uniform measurement of 128 k and SSM set to AUTO. My tablespace is called rj_test_X128K in the following test:
  

  dba@TEST> create table dba.rj_del_ins_test
    2  tablespace rj_test_X128K
    3  as
    4  select *
    5  from table
    6  where PK_COL > 1135268669
    7  and PK_COL is not null;
   
  Table created.
   
  dba@TEST> exec dbms_stats.gather_table_stats('dba', tabname=>'RJ_DEL_INS_TEST',estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE 1', cascade=>TRUE);
   
  PL/SQL procedure successfully completed.
   
  dba@TEST> select TABLE_NAME, FREELISTS, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, AVG_ROW_LEN, NUM_FREELIST_BLOCKS
    2  from dba_tables
    3  where table_name = 'RJ_DEL_INS_TEST';
   
  TABLE_NAME                      FREELISTS   NUM_ROWS     BLOCKS EMPTY_BLOCKS  AVG_SPACE AVG_ROW_LEN NUM_FREELIST_BLOCKS
  ------------------------------ ---------- ---------- ---------- ------------ ---------- ----------- -------------------
  RJ_DEL_INS_TEST                                84217        868            0          0         141           0
   
  dba@TEST> delete from dba.rj_del_ins_test
    2  where PK_COL > 1135268669
    3  and mod(PK_COL,20) = 10;
   
  4143 rows deleted.
   
  dba@TEST> commit;
   
  Commit complete.
   
  dba@TEST> exec dbms_stats.gather_table_stats('dba', tabname=>'RJ_DEL_INS_TEST',estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE 1', cascade=>TRUE);
   
  PL/SQL procedure successfully completed.
   
  dba@TEST> select TABLE_NAME, FREELISTS, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, AVG_ROW_LEN, NUM_FREELIST_BLOCKS
    2  from dba_tables
    3  where table_name = 'RJ_DEL_INS_TEST';
   
  TABLE_NAME                      FREELISTS   NUM_ROWS     BLOCKS EMPTY_BLOCKS  AVG_SPACE AVG_ROW_LEN NUM_FREELIST_BLOCKS
  ------------------------------ ---------- ---------- ---------- ------------ ---------- ----------- -------------------
  RJ_DEL_INS_TEST                                80074        868            0          0         141           0
   
  dba@TEST> insert into dba.rj_del_ins_test
    2  select *
    3  from table
    4  where PK_COL > 1135268669
    5  and PK_COL is not null
    6  and mod(PK_COL,20) = 6;
   
  4277 rows created.
   
  dba@TEST> commit;
   
  Commit complete.
   
  dba@TEST>
  dba@TEST> exec dbms_stats.gather_table_stats('dba', tabname=>'RJ_DEL_INS_TEST',estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE 1', cascade=>TRUE);
   
  PL/SQL procedure successfully completed.
   
  dba@TEST> select TABLE_NAME, FREELISTS, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, AVG_ROW_LEN, NUM_FREELIST_BLOCKS
    2  from dba_tables
    3  where table_name = 'RJ_DEL_INS_TEST';
   
  TABLE_NAME                      FREELISTS   NUM_ROWS     BLOCKS EMPTY_BLOCKS  AVG_SPACE AVG_ROW_LEN NUM_FREELIST_BLOCKS
  ------------------------------ ---------- ---------- ---------- ------------ ---------- ----------- -------------------
  RJ_DEL_INS_TEST                                84351        911            0          0         141           0

  I noticed that the number of blocks increases even though I'm only insert additional lines very little - 134 to be exact. Using the length of middle line of 141, which takes me to 134 * 141 = 18894bytes; a little more 1 block. I have an increase of 43 blocks. No idea why?
  
  I understand that there is a general fresh management regarding the use of space when you use SAMS, but I don't understand why there is such an increase in the number of blocks when I would have thought that the blocks were already allocated in the initial table creation phase. If I had inserted thousands of lines, I would have understood the jump in the use of block, but not with 134.
  
  Here are the results of the DBMS_SPACE. Procedure SPACE_USAGE
  

  UNF         0
        UNFB         0
         FS4         0
        FS4B         0
         FS3         0
        FS3B         0
         FS2         0
        FS2B         0
         FS1         2
        FS1B     32768
        FULL       891
       FULLB  14598144
  FS1
   Number of blocks that has at least 0 to 25% free space
  FS1B
   Number of bytes that has at least 0 to 25% free space
  FULL
   Total number of blocks that are full in the segment
  FULLB
   Total number of bytes that are full in the segment

  I used the DBMS_SPACE. Procedure UNUSED_SPACE and got these results:
  

  TOTAL_BLOCKS    912
  TOTAL_BYTES        14942208
  UNUSED_BLOCKS   0
  UNUSED_BYTES    0
    LASTEXTF      251
   LAST_EXTB      909
  LASTUSEDBLOCK   8
  
  Definitions taken from the docs:
  
  total_blocks
   Returns total number of blocks in the segment.
  total_bytes
   Returns total number of blocks in the segment, in bytes.
  unused_blocks
   Returns number of blocks which are not used.
  unused_bytes
   Returns, in bytes, number of blocks which are not used.
  last_used_extent_ file_id
   Returns the file ID of the last extent which contains data.
  last_used_extent_ block_id
   Returns the starting block ID of the last extent which contains data.
  last_used_block
   Returns the last block within this extent which contains data.

  Following this, here is how the stats are the deletion and insertion, shown in two steps:
  

  ##############
  # After deletion
  ##############
  
  FULL      850
  FULLB     13926400
  
  TOTAL_BLOCKS              872
  TOTAL_BYTES             14286848
  UNUSED_BLOCKS           4
  UNUSED_BYTES            65536
  LASTEXTF                 251
  LAST_EXTB            869
  LASTUSEDBLOCK            4
  
  109 extents
  
    NUM_ROWS     BLOCKS
  ---------- ----------
       80074        868
  
  ##########
  # After Insert
  ##########
  
  FS1              1
  FS1B          16384
  FULL            892
  FULLB           14614528
  
  TOTAL_BLOCKS              912
  TOTAL_BYTES             14942208
  UNUSED_BLOCKS           0
  UNUSED_BYTES                0
  LASTEXTF                 251
  LAST_EXTB            909
  LASTUSEDBLOCK           8
  
  114 extents
  
   NUM_ROWS     BLOCKS
  --------- ----------
      84351        911

  So, can someone get to explaining why this is happening?
  Or maybe some additional tests I can do to see what blocks are used for?
  
  Thank you
  SoC

  Rob_J wrote:
  As you can see, TEST 2 shows that, when you use the representative settings for PCTFREE and PCTUSED in MSSM to those of the SAMS, we get a result comparable to the use of SAMS.

  So, regardless of what I set PCTFREE to SAMS tablespace in a block must still have more than 25% of free space to be a candidate for the new pads?

  Not exactly - I think it is the next "Freeness" below PCTFREE, so if PCTFREE is for example 26%, then the block must have at least 50% free for its status as a 'FULL' erased and become a candidate for inclusion. PCTFREE under 25, Yes, then at least 25% I guess.

  Is it possible to change this behavior is this just a call, you have to take for the use of SAMS or y at - it a logical reason behind what I missed?

  Well, I guess that's what you get with segments 'AUTO' managed by magic - if the theory is correct, you can try a PCTFREE of 24 or 25 (not sure of the border), then several blocks should become eligible for the status of compensation when deleting lines. Of course, it's different from what you can achieve with MSSM - you are reserving more space for the growth future line with PCTFREE 25.

  Remember that the default PCTUSED is 40 for MSSM if you do specify not her - so the default behavior of the SAMS with 10 PCTFREE is already more aggressive towards provision for blocks compared to default MSSM insertions.

  You must also consider that SAMS was designed especially for the systems highly concurrent OLTP (and CARS) which deals, so there are many other considerations to take into account, as the way in which SAMS affects free to the various processes blocks and restraint potential reliefs on the segment header (similar to the use of FREELISTs and FREELIST groups with MSSM).

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  Co-author of the forthcoming "OakTable Expert Oracle practices" book:
  http://www.Apress.com/Book/view/1430226684
  http://www.Amazon.com/Expert-Oracle-practices-database-administration/DP/1430226684

• the use of two meters: one for the generation of regenerable impulses, one as a counter

  I'm new on use the counters. I use an NI PCI-6110 multifunction data acquisition card. I want to count a digital input (on the connector of the PFI 2) pulse and also using the entrance to trigger another counter to generate impulses. So I configured the first counter (task 1) to generate digital pulses with PFI2 as a source of relaxation and redeclenchables award; and set up the other counter (task 2) to count the number of edges of the digital signal with.... But after the two tasks began, the first task was an error 50103 (or the possible reasons: NI Platform Services: the specified resource is reserved.) The operation could not be performed as indicated.) The block diagram is attached. Thank you.

  Your Board uses very-old-in-electronic-standards-DAQ - STC a smart meter that requires a little secretly * two * counters work together to make a finite pulse train.  He is not actually secret if you read the right parts to the right documentation, but it's not hard to miss if you are unsure you should look.  It has been a while since I've done a lot with these counters, but I have this nagging thought that they may not support redeclenchables finishes pulse train generation at all.  I would caution you to at least check this.

  In any case, it is the reason for the error.  The finite impulse generation task uses only the counter that you specify, but there was also this one to help.  A couple of new generations of smart meter (NOR-TIO, DAQ-STC2) continues to have this limitation, but the * more * recent it is no longer made.

  X series boards use the chip "NOR-STC3" that give you 4 programmable counters by the user instead of 2 * AND * everyone can generate pulse trains finish without using a help desk.  You may want a pair of them upward with your 6110, assuming that you need simultaneous sampling analog 6110's capabilities.

  -Kevin P

• How do you define the page dimensions for the photosmart printer 5520 all-in-one for the sweep feature

  You want to set paper size of the image in the format of standard copy paper when scanning a document. Where can I find the settings before scanning?

  Hello

  Asuming you "scan to computer" this is how:

  

  You can select one of the following options to scan photo just a 4 x 5 to 4 x 5 even without white border around.

  Kind regards.

• And here's one for the era. How can SQL?

  Entry: Channel 541862356
  
  Table has 2 columns:

  SNO                             SLENGTH
  ----------------               -------------
  5418                                4
  54186                               5
  54321                               5

  Output should be 54186.
  
  We have no other input. that is, get the closest match to the input string.
  
  How to do this?
  
  Edited by: user12240205 may 3, 2012 22:51

  WITH t AS
       (SELECT 5418 sno, 4 cnt
          FROM DUAL
        UNION
        SELECT 54186, 5
          FROM DUAL
        UNION
        SELECT 54321, 5
          FROM DUAL)
  SELECT sno, utl_match.edit_distance(sno,541862356) dist
    FROM t
    where utl_match.edit_distance(sno,541862356) =(select min(utl_match.edit_distance(sno,541862356)) from t);
  

• When I add bookmark (Apple D), if it is already listed then my only option is to move it from its original folder or go later than in copy/paste a second copy. Is there a change of preference around that? Or, can you make one for the next version?

  I wish I could save a bookmark in both places without moving from one folder to another if I already have this bookmark saved in a folder of bookmarks. I write a lot of papers and love to go to the different materials. Sometimes I find myself using the same site for different papers, and so I would be able to do it quickly, without having to go to the Favorites section, and manually do with copy/paste. Thank you

  It has been like this since Firefox 3.0 was released in June 2008 - 7 major version releases so far with her like that and the developers have not changed - so I wouldn't count on it.

  When I want to save a bookmark duplicate, I just "grab" the image of the site in the address bar and drag it to the bookmarks bar, in the folder where I want it placed. On Windows and Linux, {Ctrl + B} opens the sidebar, and then just drag.