Hewlett Packard Elite display E271i LED Blacklit monitor _flickerin

Team dear HP,

I have a new

Hewlett Packard Elite monitor LED Blacklit E271i poster. It is connected via HDMI cable and a Port Adapter Mini video on my mac book pro Version Mac OSX 10.7.5 _.

It's already the 2nd monitor that I had, the first has the 2nd day a flickering view and I sent him to the store that I bought.

The new has today - 2nd day of work with him - the flickering again, short but it is not possible work during this period - I hooked it up and it worked again.

During this phase, I can't really work on graphic works, it is very annoying.

Y at - it a reset or how do I deal with this problem when it appears again.

Thanks for the help! Dinah

Hello

You can try connecting the monitor on another pc and see if you see still flickering?

Perhaps the problem could be the miniport-hdmi adapter.

I had the same setup as you (adapter + macbook pro connected to monitor). The adapter stopped working after a while.

Tags: HP Desktops

Similar Questions

  • Problem with Hewlett-Packard-HP-LaserJet-Professional-M1214nfh-MFP

    Nice day!

    I have a problem with Hewlett-Packard-HP-LaserJet-Professional-M1214nfh-MFP, on the display is "no chain online.

    and not print certain pages. What is it?

    I'm sorry that you are experiencing this issue. I have seen this question several times here. It seems that the firmware update is the problem.

    Here is a link that you can follow to answer this question. Choose your operating system and click NEXT. Go to the FIRMWARE and download it.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=4075462&

    Let me know if it helps.

  • Assistant product Hewlett packard has stopped working

    After removing a nasty virus/Trojan horse of my system, I get a dialog box saying "Hewlett packard product Assistant has stopped working" shortly after the opening of the session.  How to solve this problem?

    Your welcome,

    If you upgrade to 7 product Assistant will not work, it has been replaced with HP support assistant, which is the current HP software for monitoring and troubleshooting of the computer.

  • Hewlett Packard printer while a C4599 always telling me to align

    Printer continues to display Aline.

    I setting line three times, but it keeps telling me that there not well treat.

    I put in new cartridge, so I know it's OK.

    Help

    From Internet Explorer

    Original title: Hewlett Packard printer device a C4599 all-in

    Hi Pearl,

    It seems that you need help to correct performance "All in one printer C4599" printer.

    See the following links, which have enough information to solve the problem of the printer's performance.

    a message telling me to align my printer cartridges keep appearing.

    http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/a-message-telling-me-to-align-my-printer-cartridges-keeps/TD-p/1362955

    Alignment page does not print.

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02918679&cc=us&DLC=en&LC=en&product=5096386&tmp_track_link=ot_search

    You can download the driver from the following link.

    Printer drivers all-in-one HP Photosmart C4599 & downloads
     
     
    I hope this helps.
  • Hewlett Packard Deskjet 1055 installation disc

    I recently bought a new laptop.

    I wanted to install my Hewlett Packard Deskjet 1055 all-in-one printer/copier on this new computer.

    However, I couldn't find my Hewlett Packard Deskjet 1055 original installation CD.

    I found no help in the search of this site: http://www.hp.com/go/support

    Any suggestion would be appreciated.

    dhamildogg

    Dhamildogg, welcome to the forum.

    Here's a page download software & driver for the printer.  You can choose your operating system from the menu drop down.  The driver - software product is available in this section.

    Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

  • Hewlett Packard HP Compaq 8710: DRIVERS FOR MY HP Compaq 8710p Hewlett-Packard

    System serial number: (deleted content)

    I just installed windows 10 home 64 bit on this laptop and cannot very well the drivers for the following items:

    PCI serial port

    PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C & REV_0C

    PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C

    PCI\VEN_8086 & DEV_2A07 & CC_070002

    PCI\VEN_8086 & DEV_2A07 & CC_0700

    PCI Simple Communications controller

    PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C & REV_0C

    PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C

    PCI\VEN_8086 & DEV_2A04 & CC_078000

    PCI\VEN_8086 & DEV_2A04 & CC_0780

    I was everywhere on your site and found the driver for this computer page.  Installed all the drivers and have narrowed it down to these two left.  It seems that this laptop is a business laptop at the same time.  It has a mooring on the bottom port.  I also have been all over google and still can not very well the drivers for it.  Please give me a link to get the drivers.  Some of the links I've tried in the forum do not work.

    Also if someone knows something about an update of the bios for this computer would be helpful also.

    Hewlett-Packard HP Compaq 8710p F.0D

    I ended up getting on a live chat with a person who, after several trys, found the right driver.  I don't remember the name of the file.  I also got a lot of response from the HP support team.  Thank you for that.  They said they want to ensure that the driver is available on the Web site.  Pending.

    PCI serial port

    PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C & REV_0C

    PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C

    PCI\VEN_8086 & DEV_2A07 & CC_070002

    PCI\VEN_8086 & DEV_2A07 & CC_0700

    PCI Simple Communications controller

    PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C & REV_0C

    PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C

    PCI\VEN_8086 & DEV_2A04 & CC_078000

    PCI\VEN_8086 & DEV_2A04 & CC_0780

  • updates failed every night for Hewlett Packard Imaging printing HP Photosmart 6520 series NULL

    Since I have my printer photosmart 6520 02/12/2012 every night he's trying to update Hewlett Packard photosmart HP 6520 series print NULL Imaging... .and it fails every time.  I have a desktop HP P 7 1010 and since I got a new printer, I have an exclaimation point on my computer and it says the problems and when you do it it's is not drivers and it shows NO FIXED.  When you close the session at night, he tries to update the NULL characters again and it fails every time.  I spoke with people from your service many times for more than an hour and they can't solve the problem.  Help, please

    I did some research on the problem of another user, and looks like it's just a ghost update.  Basically, an update 'ghost' is an update that was for the device, but unit has newer drivers which causes the update failing to keep.  The only thing you can do is to hide the update, or ignore it.  Windows will continue to try to push it, but your printer does not need it.  If she didn't need the update, it would install right.  You can find the thread where I helped another user below.  I hope this helps.

    I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop operating system Windows 7 error 80070490

  • Increase the RAM of my laptop from Hewlett-Packard HP Pavilion g4!

    Greetings!

    First of all, I can't find the model number of my laptop, even if I follow these steps here, http://support.hp.com/us-en/document/c00033108

    But when I check my control panel > system and security > system, I found these details:

    Manufacturer: DriverPack Solution

    Model: Hewlett-Packard HP Pavilion Notebook PC g4

    Rating: 4.7

    : Processor Intel (R) Core (TM) i3 - 2310 M 2.10 GHz, 2.10 GHz

    Installation of memory (RAM): 4.00 GB

    System type: 64-bit Operating System

    My friend told me it's HP Pavilion g4 1001tx

    Originally, the installed memory is 2,00 GB, then I upgraded to 4.00 GB. Now my question is that I can improve to 8.00 GB? Say to 4.00 GB.

    Should what kind of RAM I buy?

    Please tell me everything related to my question.

    Your help will be very appreciated.

    Thank you

    Louie

    P.S. also how much is the 4 GB? The last time, it has 2 GB, for, we add an another 2 GB to 4 GB but it did not work. We have therefore decided to add 4 GB only. So, is it only 8 GB too?

    Also, how much is the 4 GB? Is it only 8 GB which can be installed right away?

    The last time, I had 2 GB and we put an another 2 GB to 4 GB but it did not work. So, we put 4 GB of RAM only. It worked.

  • Hewlett Packard HP Pavilion 23: TV Tuner & antenna

    Dose the

    Hewlett Packard HP Pavilion 23-q130na Core i3 - 4170T 8 GB 1 TB DVD - RW 23-inch Windows 10 All In One

    Have a TV Tuner and an antenna Jack.

    Can't find an answer anywhere.

    Thank you very much

    Hello

    The following link shows the specifications of the computer:

    http://support.HP.com/us-en/document/c04816367

    No TV tuner therfore, there is no point to have an antenna Jack.

    Kind regards

  • Hewlett - Packard HP Compaq 6000 Pro MT PC memory problems

    I have a few Hewlett-Packard Compaq 6000 Pro MT of the HP PC I want to make a memory upgarde. At the moment the memory installed on each of them is 2 GB Micron 8JTF25664AZ-1G4D1 - 2 GB DDR3 - 1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz). I bought 2 different brands with the same specification that Corsair XMS3 4 GB 1x4Go memory SDRAM Desktop DDR3 1333 Mhz DIMM 240-pin CL9 and Kingston HyperX Blu 4 GB of RAM DDR3 1333 MHz DIMM 240 pin CL9 memory generic. When mounting this new memory I get the error message sound for faulty memory. Memory have been tested on the brand of the other computer and it works fine.

    Can someone tell me what I will do in this case? I updated the BIOS as well, but still no change.

    Kind regards

    Patrick

    I not really much information but what I have found, here's a thread @Tom in the same direction as your ad material .  It shows the same symptoms as published at the end.  This person has used BLS2KIT4G3D1609DS1S00, which is the FOLLOWING.  Found on AMAZONandEWEGGN.  Also to MICROCENTER.

    Motherboards are picky when using RAM, so use what is known to work.

  • HP hewlett packard Tablet: administrator password or power password HP Tablet HP

    Hello.

    I bought a Tablet HP Hewlett-Packard in good will but when I try to turn on the device an administrator password wonder, and after failing 3 times, the device gives me this code 94062100, honestly I want to just format and start using the device from scratch.

    hope someone of you can help me.

    Thank you!

    Awesome!
    Amazing, thanks mate, now asking me for a password to the user.

  • Hewlett-Packard 0944 motherboard

    I have an old Compaq NC6230 and I am looking for the motherboard drivers.  I was unlucky to find any so far. The motherboard is a of Hewlett-Packard 0944; KBC version 40,22.   I had to do a fresh install of Windows XP RO and many riders are missing from the category (OTHER) on Device Manager.

    Hello:

    Here are links to the drivers you need:

    ETHERNET CONTROLLER

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=447372&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_49200_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    NETWORK CONTROLLER

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=447372&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_48946_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    PCI SIMPLE COMMUNICATION CONTROLLER:

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=447372&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_48397_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • The Hewlett-Packard 786 7 v01.02 BIOS update

    Hello

    I installed a nvidia geforce gtx 560 card ti graph in the workstation HP xw4400 of my son as a Christmas gift, and I get the following error message:

    "Your computer's system firmware includes enough information to set up and use this.

    My understanding is that I need to update the BIOS, but I can't find an update for Hewlett-Packard 786 7 v01.02 on this site. I've attached a screenshot of system information.

    Thanks in advance for your support.

    The XW4400 is currently in the BIOS v2.07 Rev A, 8 December 2010 , but the history tab provides no story at all... so I can't find the old versions of BIOS and as such can't see if it's OK to jump directly from v1.02 to v2.07 without problem...

    But the tab notes relase v2.07 includes following:

    This package contains the system BIOS (BIOS family 7 786) and BIOS image the and remote flash utility for the HP xw4400 workstation. These utilities can be used to restore or update THE system BIOS. System BIOS is the operating system
    independent.

    If the BIOS linked above is for your XW4400 that uses the BIOS 786 7 family...

    But please note that the XW4400 has only updates for XP & VISTA and not Windows8. So the XW4400 updates may or may not work as expected when it is used with Windows 8. Both such and especially with a BIOS update that can be risky, I won't use the method of updating windows (HPQFlash) flashing the BIOS from version HPQFlash may not be completely compatible Win8... Instead, I would like to use the 'flash-BACK' or "BIOS CD" methods.

    You can learn more about the different methods of updating BIOS by looking at all the README files in sp51215.exe. You can either run sp51215.exe to unzip the contents of c:\swsetup\sp51215\ (but do not perform a bios update, just close the tool) or 7-zip to directly view the content of sp51215.exe...

    [edited to add following]

    Some other info on your error code 35 can be seen here and here.

    Seems that a pilot unit 35 error code can be fixed with a BIOS update, but only if the manufacturer has taken the trouble to make the necessary changes to properly allocate resources to the card...

    As a species at HP by doing as little work as possible, my still under warranty Z210 running Win7 Pro 64 bit has issues with Estate HDD support. The last driver from HP TSRI is version 10.6.0.1002, which plays well with my hard drives Estate because they appear as removable devices... Last iRST driver Intel 13.2.4.1000 does not support the "cougar point" such chipset used in my Z210 and causes weird problems when I Estate connected HARD drive (and sometimes when not connected)... But Intels TSRI version 12.9.0.1001 driver supports chipsets "cougar point" and so I can finally esata hard drive appears as removable devices...

    Unfortunately, HP has not bothered to update their drivers for centuries and they stay with a 10.6.0.1002 defective TSRI pilot... As you seem, HP wont always do the necessary work, and it's on a support and still under warranty machine... I call it "HP." Support '...

    The update of the BIOS may or may not help your situation, but in all cases, you have still some problems with drivers and the Windows 8 to settle as the XW4400 was never certified for Win8. You may need to perform a job detective to ensure that drivers, especially the chipset drivers, used during the Win8 installed and updates post install actually support the hardware itself... He is a guy to know what is the problem that the documents appear to be getting dumbed down and therefore, you will need to do a lot of reading...

    Otherwise, you could try to install a different generation or make card but a bike may have been a more easy Christmas gift...

    See you soon...

  • Cannot get T500 to display on the external monitor

    Hello
    I'm running Windows 7 on a ThinkPad T500 (type 2082.BSG), and I'm having problems after have recently updated my display on the Lenovo site software (read the list of installed software, I think that the installation of the software that is the cause of the problem is "ThinkPad features video [AMD switchable Graphics (M8x)] for Windows 7 [32/64 bit] ') version 8.752.4 - 101022 a-107489C-Lenovo). Before the update my computer has guessed what display is active (laptop screen or external monitor) and used the active display. For example, when the laptop is docked and the cover closed he used the external monitor. After the update when the laptop is connected and the lid is closed, I can't display on the external monitor. I have to open the lid and use the Fn + F7 to get the display on the external monitor. Can anyone tell me please what settings should I use to get the old behavior.

    Kind regards

    bostjanv

    The previous is an old post, but as there was no response, and I recently solved the problem, I write in case someone else runs into the same problem.

    After having encountered the problem I restored the factory default driver (which does not show the problem). However, lately I received another message to the effect that it is recommended to install Lenovo "Thinkpad video Features (AMD Switchable Graphics...). ...". I installed the software but the problem described in my original message reappeared. However, this time, the software of (the age AMD) had a "driver update" option and my video material is correctly recognized and the correct driver has been downloaded from the AMD website, after which the problem described in my original post disappeared.

    Kind regards

    bostjanv

  • Z600: Nvme Solid State Drive and Z600 card mother Hewlett-Packard 0B54h

    I would like to know if the motherboard of Hewlett-Packard 0B54h (BIOS Hewlett-Packard 4 786 v03.57) accepts NVME SOLID STATE DRIVE to boot from the primary.

    I have a Z600, dual Xeon X 5650, 48 GB of Ram.

    Thank you very much

    Hello

    Please check the pages 7 & 8 of the following document:

    WWW8.HP.com/h20195/v2/GetPDF.aspx/c04111619.PDF

    Kind regards.

Maybe you are looking for