Hey, I need help.
OK so I had this drive hard proratable. and when I move things him she just copy it... keep a version of the old place, I like, I want to move... How do I change this setting? Thank you.
You must press the option button during the movement of content - that changes the copy to move
Tags: Notebooks
Similar Questions
-
Hey, I need help☹️ my battery dies so fast and what suite 26% it's just farm off☹️
Hey, I need help
my battery dies so fast and when on 26% it's just... If turned off on me I need help
Please read this article for suggestions, including turn off background App update.
http://www.Apple.com/batteries/maximizing-performance/
Also try to download the app battery life which is available for free on the App Store. Check the battery with it and if defective, schedule an appointment in an Apple Store for eventual replacement.
-
Hey ~ I need help in Windows Media Player 12, remove album art!
Hey ~ I need help in Windows Media Player 12, I got some song I want to add in the album art, but I had a song I add in a hard cover and I can't remove... so pls help
Hi VX-savers,
Thank you for using the Microsoft Forum.
Permanently remove the Media Player 12 album art:
(1) you can click on View (WMP12),
(2) choose the columns.
(3) turn off the Album Art box, and you're done.
Before performing this operation activate windows to show hidden files:
(1) open the computer,
2) click on tools, located on the top toolbar.
(3) then Folder Options.
(4) then click on the view tab, and then look for the element that shows the hidden files, folders and drives and check this option.
This is where the cache. Find and remove.
Windows 7 Media Center has its own cache of album art, where he recorded the album art thumbnails (Windows 7-cache):
C:\Users\USERNAME\AppData\Local\Microsoft\eHome\Art Cache
(with the corresponding "USERNAME").For more information : http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/3552ec2d-d510-49ec-985c-1fc04c3d6da6
http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/0b3e71b3-9b85-4d0a-987C-e7b52677840d/I hope this helps.
Thanks and greetings
Azeez Nadeem-Microsoft support -
Hey guys, need help! Thank you
Hi, AbrahamRamos, and welcome to the Skype community,
Is yours a test post only, or is there something that could help the community contributors and passers-by with that?
Please post back with more information and details, including
-Equipment used (computer/phone/Tablet laptop brand and model)
-Operating system (version and installed updates)
-Skype version
-Internet connection used
Thanks in advance.
-Skype Community moderation team__________________________________________________________________________________________________
Your question has been answered? Please click on the link to accept as a Solutionfor everyone can quickly find what works! As a post or want to say, 'Thank You ' -? Click on the button of congratulations!
Reliable information: Brian Krebs: 3 basic rules for online safety -
BlackBerry smartphones, that I need help as soon as POSSIBLE please
Hey, I need help with ym Blackberry Curve 9300
I tried to download the new update to 6OS but it won't work, I downloaded the latest version of Blackberry Desktop software but every time I try and update my phone it just comes up with "a updated Blackberry Desktop software component must be installed to continue" but then when I click on 'install' it happens to not even 1/10th of a full bar and it's freezing I left it on all night and it still did not move 1 cm, someone please help as I really want to download the new software but ive been trying for days to do and it still does not work
help would be appretiated,
Thank you
Do this way:
See the link below to download it and follow these simple instructions.
First find your operator and the system operating file that you want to use.
http://NA.BlackBerry.com/eng/support/downloads/download_sites.jspMake a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.
1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file. -
Continuing to install Shockwave need help
Hey, I need help im trying to open some files raf with shockwave and whenever I open it, it installs, why he keep doing this?
RAR is probably an archive WinRAR
-
Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?
You must pay your debt first.
-
Hey guys, ive tryied buy photoshop like a hundret times, ive typed in my information payment and everything I need, went on the button pay on the accept button but nothing happened, I need help pls passing sry for my language
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
-
need help with an old version of CS and I tried to active several times in 30 days and it don't work and now it will not open now help please!
CS2 (or earlier version) software activation server replacement
NOTE that CS2 will not install on a Mac "modern."
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option
-
Mode of payment has been denied! Need help!
I get notification of payment refused when I try to buy something, I tried to use 2 debit cards, and I had the same problem. This certainly isn't my problem of banks I have used my card all that time and one of them is a new card. Before I could easily buy things, but now I have this notification. I need help!
Hey Pria06. Its bad to hear that you cannot use credit cards to buy things on iTunes. You may need to call Apple Care to support. Perhaps is there a problem with the system.
They will help you
-
Need help with the installation of the drivers on the Satellite A100 - 215 PSAA9E
Hey all
I just reinstalled XP home on the satellite A100-215 (PSAA9E-02F00VPT) and I meet some real difficulties get the LAN, VGA and wireless drivers installed.
Everything else works, but for some reason, these drivers are not what they are supposed to and I find myself in a bit of a tile?Someone at - he heard of these drivers being wrong before, if yes is there a solution out there?
Really need help now as have been on it for a good few hours now and no not get anywhere fast?
Thanks in advance
Matt
Can you give an exact describtion of the problem with drivers?
So first of all, you can try to download the drivers again from the download page of Toshiba here:http://EU.computers.Toshiba-Europe.com
And make sure that all windows updates are installed. SP2 is important to be installed for some devices.
-
need help with the CVI real-time
Hello
I'm new to CVI real-time and need help related to this. I'll explain my scenario:
1. I have a few configuration files (INI). Need to validate the files (the range... check etc.) when the application is started.
2. when the user clicks on 'START' in the user interface on the host machine, I need to generate outputs (analog/discrete...) according to the settings in the config file and read a few entries of other instruments. (I/O such tasks that generate outputs/inputs, I intend to perform beside reading RT)
3. from the user interface, user can also change the configuration files. If the user modifies the files, file validation must again be made. After editing files, if the user clicks on START, the need to take the new entry to perfom tasks I/O configuration files.
4. I am NOT using reflective memory for my application.
I am confused in the following area:
1 file validation during startup, I have to perform on host and on the side of RT?
2. If the configuration files are changed in the host side user, how I send the names of files to RT? I think that I should not send the file names, I need to read from the file and its contents, I need to move on to Rt.... Pls correct me, I'm not sure about this...
3. If I send the contents of the file to the RT, how do I do... I have to use structures, means... ???
Please guide me. Any help would be much appreciated.
Kind regards
Samantha
Hey Samantha,.
1 file validation during startup, I have to perform on host and on the side of RT?
It depends on the full range of responsibilities for INI files. If they are necessary simply to change what the I/O are for, then you would be technically just validate the content of the file INI on the side of the RT. However, you could post on both sides if you wanted to. However, I would probably set up as I have send a validation to the target control, have the target run a component of the code that validates the INI content based on how I loaded it and then returns a message that says if it meets the requirements I specified. However, if you are concerned with unloading of this process on the user's desktop (to the contrary increase the performance of the RT controller), you may FTP the file to the rheostat and perform the process of validation of the side host.
2. If the configuration files are changed in the host side user, how I send the names of files to RT? I think that I should not send the file names, I need to read from the file and its contents, I need to move on to Rt.... Pls correct me, I'm not sure about this...
You can send them to the target by FTP. This can be done programmatically, by MAX, command or a Web browser window.
3. If I send the contents of the file to the RT, how do I do... I have to use structures, means... ???
It is basically addressed in answer to question two. You would not need another structure in your code of RT to manage the FTP receive component as this is handled by the FTP Client/server communication. However, in case you successfully FTP a file to the target, you should probably send a message between the host and the target so that the target can react accordingly and reload the file I/O values, run an inactive procedure, or do what you want.
I hope this helps. Have a great day!
-
Need help with the launching track pack for forza code 4
Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
This is the help I get when the cat to an Ambassador xbox on xbox.com
Terry wrote:Need help with the launching track pack for forza code 4The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]The Xbox Ambassador says:HelloTerry wrote:HelloThe Xbox Ambassador says:HeyTerry wrote:just to be on the phone to xbox live support and was told to come hereThe Xbox Ambassador says:ok\The Xbox Ambassador says:What is your problem?Terry wrote:I bought the 4 for forza ansd 360 new sealed Christmas...Terry wrote:has got 2 codes that accompanies the game but the pack track code does not workThe Xbox Ambassador says:Wow goodTerry wrote:whenever I put in the code it says code redeemedThe Xbox Ambassador says:I think the code is used. You must return to the retailerTerry wrote:I tried to, but since I already opened the case they will not acceptThe Xbox Ambassador says:Oh. No,Terry wrote:the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is openThe Xbox Ambassador says:Maybe it was auto bought?Terry wrote:so, how do I get another code generated track Pack if defective?The Xbox Ambassador says:I do not know.Terry wrote:bought the game new, so I get the track packThe Xbox Ambassador says:Oh. It's bad.The Xbox Ambassador says:I think that if you Exchange 1 code it will buy itTerry wrote:car pack code worked, starter pack did not workThe Xbox Ambassador says:Oh.The Xbox Ambassador says:It's a badThe Xbox Ambassador says:BTW you have an evolution of the tests?Terry wrote:Yes, I want to? but more anxious to get a code object generated for this packThe Xbox Ambassador says:Hey if I help can u give me this game too?Terry wrote:?????????????????Terry wrote:So is it possible to get a code for that time?The Xbox Ambassador says:HeyThe Xbox Ambassador says:Yes.The Xbox Ambassador says:you need to contact themThe Xbox Ambassador says:and tell them that the code is used.Terry wrote:I was told to come here? where can I go to get the code?Hi Terryg76,
· What version of the operating system is installed on the computer?
I suggest you to contact the game manufacturer for more help and information.
-
Need help Kodak 5500 AiO printer over the network.
I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer. I need help.
Thank you
Phil
original title: using network printerEveryone,
That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.
Hey all,.
We had this same problem...
We had to follow the procedure proposed by Drompa...
> 1) share permissions
>> 1. In explorer, select C:\windows\system32\spool\PRINTERS
>> 2. Make a right click, properties
>> 3. Tab sharing
>> 4. Advanced sharing
>> 5. Check "share this folder".
>> 6. Permissions
>> 7. Grant everyone full control
>>
(> NTFS permissions 2)
>> 1. In explorer, select C:\windows\system32\spool\printers
>> 2. Make a right click, properties
>> 3. Security tab
>> 4. Edit
>> 5. Add
>> 6. Advanced
>> 7. Find now
>> 8. Select 'NETWORK '.
>> 9. Ok
> 10. Total control of the NETWORK grantAND THEN we had to install local printers, using the port trick...
1. go to 'printers '.
2. click on "add a printer".
3 Add a local printer.
4. "create a new Port.
5. use the "Local Port" option
6. on "Enter a Port name" enter: "\\Computername\Printername".And if all goes well should do!
Good luck!
Credit to Drompa and otherdreams to help out me.
Phil
-
all the deleted variable envoirment need help
all the deleted variable envoirment need help
Hey Hamid,
I suggest you perform a repair of the system. Followf operations from the link provided and check.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212?WA=wsignin1.0
Important: Remember to backup all important data before doing the repair.
Hope this helps and let us know if you need more assistance. We will be happy to help you.
Maybe you are looking for
-
Apple TV has the FrontierTv app?
-
Photosmart B109n: Photosmart b109n install fails on XP PC
Hello I try to install the above using both the full software suite or driver files only. The installation fails in the same place every time. After that the review and accept the step, the software starts the installation, through verification of
-
Another problem of mine. > I use Windows Vista. > I can't uninstall the game in Control Panel. > When I click on uninstall, it says: *****************************************************"An error has occurred trying to uninstall (games).It may have a
-
When I tried to start the desktop computer with Windows XP operating system, I get the message "olecnv.dll is possibly corrupt. ' the checksum of header not the checksum calculated. the screen will not forward. Please advise to Prime the system. Uday
-
Hello people, Until last week, I network my 3 computers using Ethernet wiring wiring, where the hub / modem has a built-in hardware firewall. In this scenario, I was fine with the own Windows Firewall. Now, my computers are networked using a 2.4 GHz