Hi cannot get silverlight to install on my computer using windows vista 32 bit laptop

I tried to install silverlight for netflix cannot operate on top of the help system

Hello

1. what happens when you try to install Silverlight?

2. in the place where you install Silverlight?

You can install Silverlight from the link.

Download Microsoft Silverlight

http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

If the problem exists, you can ask your question in the Silverlight forums.

Installation and configuration

http://forums.Silverlight.NET/13.aspx

See also:

Silverlight: Cannot install Silverlight or Silverlight gets installed but cannot play videos; Error: 1503

http://support.Microsoft.com/kb/979005

Tags: Windows

Similar Questions

  • Cannot install Service Pack 2 using Windows Vista Home Edition or anything else on the internet.

    Hello

    I tried to download and install Service Pack 2 using Windows Vista Home Edition, or anything like that on the internet without success. According to me, the key word is internet or a block of Vista from the internet to install anything. Many people here get the same error 80070005 for SP2 as I am, but I think that the problem is with Vista, how the system allows any installs or blocks installed from the internet. I suppose that some are able to go through the download process, but installation is where it does not pass through. There are moments where it seems that the installation of SP2 works, but it will fail eventually. Other times what ever happens to the installation process. The same goes for all other downloads and installs from the internet. I am able to install a program that already exists on the computer, so I know that installs works just not the Internet. Do not send me a link to install because it probably won't last through. I may be able to download but installation will not pass by so that the program will not work. I used the words installation and internet a lot for some reason please take account, when responding.

    Thank you

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • I'm trying to download Lightroom on my PC. I get the message "is running an operating system that Lightroom is no longer supported" that I am currently using Windows VISTA 64-bit. Help

    I'm trying to download LIGHTROOM on my PC. I get the message "equipped with an operating system that LIGHTROOM can't stand". I currently use Windows VISTA 64 bit. Need more. Suggestions?

    Hi William. Unfortunately, Vista is not a system for Lightroom 5 or 6 of Lightroom. You will need to Windows 7 or a later version. See here: system requirements

  • Cannot get my drive installed on my computer because I don't have a disk drive.

    I can't get my photoshop installed on my computer because I don't have a disk drive. I tried to download it, but it still doesn't work.

    Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

    You can also download the demo version of the software through the site linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    http://prodesigntools.com/tag/DDL

  • I get the msg, "another installation is in progress" whenever I try to install/uninstall a program from windows vista 32 - bit Dell Inspiron. How can I fix it?

    Hello

    My Dell Inspiron E1505, running Windows Vista Home Premium 32-bit has had problems lately with the download and installation of windows programs. I close, instead, it will give me msg, "do not turn off or unplug your machine... installation of updates x n updated but that light up as long I have either." He can even take days. When I want to install a program or uninstall, it will bring out the msg, "another installation is in progress waiting until one finishes." I couldn't even run the windows Upgrade Advisor seven for the same reason.

    There, can anyone help?

    Thank you.

    Hello

    Please go to the Microsoft Community Forums.
    Description of the question, we understand that you get an error when installing and uninstalling the programs.
    Let us move forward and help the issue.
     
    What program are you trying to install or uninstall?
     
    Here are some links that you can follow to resolve the problem:

    For issues related to Windows updates
    Check out the link and follow the steps in the article:
    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
     
    For problems with installing and uninstalling programs
    Check out the link:
    Solve problems with programs that cannot be installed or uninstalled
     
    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
  • Cannot get my dell A920 printer to print using windows 7, it will scan but not print. It is said it can not print, but may not know why when troubleshooting

    I can't get my dell A920 to print.  It scans but does not print.  The reasons why CN can't find troubleshooting.  Help

    dosducexx,

    First run, delete print jobs to eliminate any print job stuck in the queue.

    Unplug the printer.

    Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

    Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

    Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

    You will find links to the patch/drivers to...

    Owners of printer inkjet all-in-one Dell A920 thread (W7)

    Don't forget the programs anti-virus and firewall will block communications.

    Rick

  • 0 x 80070026 error when trying to install service pack 2 on windows vista 32 - bit operating system.

    I bought my laptop with a version pre-installed Windows vista and service pack one. I recently tried to upgrade to service pack 2 and I get error 0 X 80070026. I tried several troubleshooting actions such as disabling all my software anti-virus (Mc McAfee, Spybot...) and I found that there are corrupted files that cannot be repaired. Is someone can you please help me solve this problem?
    Thank you

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot access the data of a dvd burned using Windows Vista

    Mr President.

    We burned a dvd using the integrated software disc Vista burning... the procedure was as follows:

    After inserting the disc, we formatted the disk by checking the "Quick Format" option... the format once completed, we pulled the folders n files that are supposed to be stored on the dvd n that the process has begun... After the end of the burn, the dvd is ejected automatically... but the dvd is not readable on other laptops or desktops... well helping... data are very IMP... We have no other backup data... and we have formatted the old laptop and upgraded to Windows 7...

    Forward to your response

    Kind regards

    Hitesh Baku

    How does the combustion process end - did you finish it or simply eject a DVD?  If you have completed it, exactly, that you have to finish?  What type of backup has been made (or did you use just copy/paste instead of the grogram backup) and what version of Vista are you using?  Did you use the live file format or the image ISO format http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html?  What kind of CD or DVD (CD, CD - R, CD + r, CD - RW, DVD, DVD - R,...)?

    Insert the DVD into the drive and go into Windows Explorer and right-click on it and select explore.  Any files or folders appear?  Go to start / Control Panel / folder opt / view on the and make sure that the button to view the hidden files is checked.  Also check the box to show system files and uncheck to hide extensions of known file types (this can be useful later).  Nothing now watch or it always seems to be empty.

    Go to start / Control Panel / administrative tools / computer management / disk management and check on the DVD in the car and tell me what it says on the size and the amount of available space (in other words, think data on the DVD).  Closer to your mouse on the DVD player and a text box appears above it lists criteria to this stationary player down.  Please post what he says EXACTLY, in the same order, as it is presented.  Does show as active for example?

    Here are the instructions on how to copy data from a hard drive to a CD.  Read carefully.  You skip steps or fail to wait until the processes were completed before moving on to the next step?  If we know what hurts you, it may be possible to fix it - but I don't know (because I have no idea, but why it happened). http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html.  Also, check out the following article, especially the section about closing or to finalize the process and see if you have done this http://windows.microsoft.com/en-us/windows-vista/Disc-burning-frequently-asked-questions.

    Here is another article on how to burn a CD/DVD in Vista to test to see if you followed the procedures as indicated or anything left side: http://maximumpcguides.com/windows-vista/burn-a-cd-or-dvd-in-windows-vista/.

    I believe that you have finished the session before it was finalized and it's the cause of your problem (assuming that Disk manager shows ALL the data on the dik at all - in which case I am afraid that the information was not stored on the CD/DVD and are not recoveralble, because there is nothing there to recover).  If the development is the issue, there may still be a way to finalize the disc - although I'll have to research further on this subject because I don't know how to finalize a disc that has already been ejected before it was finalized (and depends on what probably treat you used).

    ===========================================================================================================================

    Even if you have your drive formatted and installed Windows7, it is still possible to recover some of the data that was stored there using special recovery software.  I don't know if these programs work with Windows7 (it is a forum for Vista) but you can check the details before you download them or go to the Windows7 Compatibility Center to see if they are listed http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx.

    The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

    Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

    I hope this helps and I look forward to your reply with the results of the options I suggested, the I asked you to perform checks and questions I asked (and I know there were many, but I'm not here in front of your computer with the disk to try things myself so the only way I'm collecting information that I need help (if possible) is to seek your help for) help me.  Thank you.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I can't install Photoshop elements 12 using Windows Vista

    I visit the Web site of your Abode.com for technical support for Photoshop elements 12 disc which I can not install on my computer. I have a Window Vista operating system, and this disc does not at all. Your conclusion of technical support agent has been that I have a version unsupported of 12 elements in Photoshop. What do I need to know how I can get a version of Photoshop elements 12 that support Windows Vista?  12 Photoshop elements has been included as a gift from QVC, I bought a Canon camera.

    On the disk for the 12 EP, I must say.

  • How to install SharePoint server 2010 on windows Vista 32 bit?

    I want to work with SharePoint designer 2010 for web development and have need of SharePoint server 2010 to work with her. I find different articles on the Microsoft web site to install the required components, but most of them including Shell 2. So I was wondering if it is possible to install SharePoint Server on Vista 32. If so you could advise me how to?

    Thank you

    Hello

    Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the MSDN Forum. You can follow the link to your question:
    http://social.msdn.Microsoft.com/forums/en-us/sharepointgeneral/threads

  • Cannot get Horizon view 5.3.1 to use Windows CA certificate issued

    Hello

    I have a Horizon view 5.3 vConnection Server installed and wanted to replace the self-signed certificate with one of my MS Enterprise CA (Win 2008 R2 Ent).

    I followed the instructions of these two pages, I think exactly:

    Terence Luk: certification for VMware view Horizon 5.2 with Microsoft Enterprise certification authority servers http://terenceluk.blogspot.co.UK/2013/04/issuing-certificates-for-VMware-horizon.html

    http://www.derekseaman.com/2012/09/create-VMware-Windows-CA-certificate.html

    I took the steps:

    On my Win 2008 R2 Ent (standalone) CA, I reproduced the compatible under Windows 2003 CA Web server certificate template.

    Changed the use of the key to activate non-repudiation and "allow encryption of user data.

    Authentication of the Client added to enforcement strategies

    Confirmed that the name of the topic has been set to "provide in the request.

    Confirmed the vConnection Server computer account has the required permissions (btw, I even gave total control and the problem persists - is not a permissions problem)

    Added the new model to the list available to be issued (CA MMC > Certificate Templates > New > model certificate for the question)

    From the vConnection server, I open the MMC snap-in certificates, computer store

    I asked a new personal certificate from my CA and selected the newly created model

    I have completed only the FQDN internal of my server vConnection CN: [CN = "vmwv-vncenctn - 01.mydomain.local"]

    I updated the friendly name and description "vdm".

    I changed the friendly name of the empty self-signed certificate

    I restarted Windows vConnection server just to make sure that all the necessary services were restarted

    I cannot now connect to during a service of vConnection's web management interface - Page cannot be found.  If I have the friendly name of vdm revert to the original self signed certificate and restart services, access is restored.

    Please can someone help me with this.  I spent two days pulling my hair and getting nowhere.

    Thank you

    C

    Follow rather official VMware documentation.

    http://pubs.VMware.com/view-52/topic/com.VMware.ICbase/PDF/horizon-view-52-obtaining-certificates.PDF

    In particular, make sure that your use of improved key contains the correct value.

    Mark

  • I can't get the C6350 HPPhotosmart fully install on my computer running windows 7 64 bit.

    I use a wireless setup and installation appears to stall HP Photosmart essential. I can print. The HP Solution Center does not open because the installation is not complete. I try to get to be able to scan from my computer.

    OK, let's try again:

    -With the help of the uinstaller to the start menu > all programs > Hewlett-Packard unstall the software folder.

    -Start and run Windows Update again and again until there is no updates.

    -Restart your PC.

    -Without doing anything else, or from any other downloading software from the "Support & drivers" link at the top of this page.

    -Once the installation is complete, restart your PC.

  • Cannot get the Adobe PDf printer to run on windows 7-64 bit

    Has anyone solved how do the Adobe PDf printer in windows 7-64 bit. During the installation it aligns it with LPT1 printer port. other discussions/solutions, it was suggested to add new printer with port existing use: Documents\ * .pdf (Adobe PDF) selected.

    This port option does not appear in the list of existing ports well. can someone help with this problem? Thanks to a witness of anomaly. Mike was soon

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot download .pdf files. Also, my computer is Windows Vista capable.

    Bought my laptop about 3 months ago.  Have you noticed that I could not download all the .pdf files.  I sent the question to Microsoft and they led me to a web site and now here.  I don't know yet source .pdf files.  If anyone knows why I can't download these files, would be great

    Friday, October 8, 2010, 01:09:01 + 0000, No1nonnie wrote:

    Ken, after I went to the site of foxit, there were about 8 or more links, I could choose, and I don't know which ones I need.  Do you know which ones should I choose?  Of course, I wish they were free.  All of the suggestions. ?

    Just one - one free download. Get it at
    http://www.foxitsoftware.com/PDF/reader/addons.php

    You need not what anyone else.

    Ken Blake (MS-MVP)

  • Problem installing flash player 11.0.1.152 with Windows Vista 64-Bit

    Hello

    I can't get Flash Player to install on my computer with Windows Vista 64-Bit - is not serious if I try with Firefox, Opera or IE (usually, I use Firefox).

    The download is not a problem, but when I run the .exe downloaded, the file disappears from my download folder and nothing happens - not to mention that the launch of a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can not try to start the installation again, until the deactivation of the process via the Task Manager ("that one instance of this application can run"). No matter if I try the download and installation with or without 'McAffe security more' btw - same result.

    I have never had such a problem before - Flash Player 10.3 has been and no problem to install and use.

    I tried all the measures proposed in the troubleshooting section on the official website, including measures for advanced troubleshooting (uninstall the old version, run as administrator, disable the software firewall, disable antivirus, etc.). Nothing helps.

    I have never had these problems with my laptop running Windows 7 - just my desktop computer with Vista 64-bit.

    Any help would be greatly appreciated.

    Try to use installers of links in http://forums.adobe.com/thread/909550

    PS subject moved to the Installation section of the forum.

Maybe you are looking for

  • Problem with sound on my new Satellite L655-1FO

    Hello I bought a new Toshiba Satellite L655-1FO before 5 days, I have install all the driver on XP one my sound work ok, but today I connect my headset and I didn t hear sounds like the music, just a few scratches sound and when I disconnect my helme

  • Windows recovery question

    Hello My HP dv6 laptop acted strangely lately... no opening/installation/uninstallation programs esp. HP, not looking for drivers for various things etc. I was advised to use the recovery partition to reinstall my windows. However, I have a few quest

  • Libcurl/libxml2 segfault

    I have been working on a library for a while now (http://bbing.codeplex.com/) and that you actually want to release (officially). But I hit a few roadblocks. The remaining list of todos I have are: Make sure that it works Search for memory leaks Rele

  • Monitor wireless authentication failures

    Hi all I am looking for a way to monitor client authentication with our autonomous APs 1142N 3 failures. I know I can see failures under each access point log viewer, but that he hoped that someone had a suggestion for a better way to monitor. Thanks

  • Where can I download the 64 bit version of windows 7 OS?

    Hello. My warranty on my dell latitude e6500 laptop just recently expired, and of course that means I now have problems My hard drive crashed, I'm trying to replace it with an SSD. I intend to reinstall everything on my laptop from scratch, and while