Hi dear, I just set up my connection wireless network with password

Similar Questions

• need to configure a connection wireless network with static IP address to make a panasonic wireless display of work on the virtual machine

  Hi, I'm new to macs and Fusion. I have a MacBook Pro 13 mid-2009, running 10.5.7 and Fusion 2.0.5, running Win XP Pro SP3 as the virtual machine (not in a bootcamp partition separate). I added a second network as a bridged network adapter (first one is set to NAT). I'm trying to connect my wireless panasonic (802 11b) to the virtual machine display, as I do on my old sony PC. Normally, I turn on the wireless on the PC, find the network wireless in Win XP and configure my SSID and necessary of static IP address and configure the NIC to search only ad-hoc connections (non-infrastructure). I also turn off the firewall so that it can work. There is a panasonic program runs on the PC (which I also installed on the virtual machine) makes it all happen once I have the connection. So the place that seems to be stuck, it's that I can't find a wireless to configure network adapter since--what the VM is a NA standard, so there is no place to specify the SSID, ad-hoc and disable the WEP key. Someone has ideas how to go beyond my current state?

  In addition, the panasonic only works at 800 x 600 for the display resolution, so it will automatically change the graphics settings. I guess that's not a problem on the VM, but thought I would ask in advance in case someone sees a problem with it.

  Thank you very much.

  Larry

  If the only way you can connect to the device is via WiFi, then you will need to provide your own WiFi USB network adapter to the virtual machine because Fusion presents only the network card Ethernet wired to the Virtual Machine, regardless of the host network adapter is the main map.

• set up a wireless network with 2 iMacs

  How to set up a wireless network with 2 iMacs?

  Need more information. Writing an effective communities of Apple Support question.

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• Unable to connect wireless network.

  Original title: [HELP] HOW TO RESET the NETWORK CONNECTION to THE ORIGINAL SETTING?

  I connected to a network/server, but my laptop does not respond and always showed "unable to conect" even though I am connected to wifi, data.

  Please help me how to solve this problem.

  Hello Muhamed,

  Please contact Microsoft Community. I've surely you will help solve problem of wireless network connection.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the computer?
  2. What is the full error message?

  This problem might have occurred because of these reasons:

  1. Incorrect settings.
  2. Corrupt the network wireless driver.

  Try the steps listed here:

  Method 1:
  I suggest you try the procedure described in the article and that will help you solve connection problems.

  Why can't connect me to a network?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

  Method 2:
  If the problem persists, I suggest you check try the procedure described in article which will solve problems withhelp you with fixing wireless network problems.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/wireless-networking-FAQ#1TC=Windows-7

  See the article for more information.

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows/setting-wireless-network#1TC=Windows-7

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Original title: the connection card wireless network with windows 7 problem

  I have a dv6 Notebook PC HP clubhouse, 64-bit Windows 7 Home Premium, I bought end July2010. H-he detects the wireless network but will not connect. just if I'm until modem.but colse it smt connect to the deffernt wireless network. What is happening and where do I go to fix this problem.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you try to connect to the wireless network connection?

  Method 1:

  First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Let us know if you need more assistance.

• Unable to connect to a wireless network with Droid Maxx

  I have a Microsoft wireless router. My laptop and a smartphone from Samsung can connect to the internet without any probplem. However, two smartphone Motorola Droid Razr Maxx can stay in touch. The phone can find the network, will connect for a fraction of a second, then just go to 'get address ISP. " I checked the log of the router, and it shows that an Android device on the network.  Do I need a new router, or someone can help me to connect my phone so I can use the network to save time of data?

  Hello, Marie ZKreider,.

  Thank you for the Microsoft Community approach. I understand that you have problems with your smart phone wireless network connection. The question you posted would be better suited to the forum of Support from Motorola. I suggest that you check with Motorola support for more information.

  Motorola Solutions

• Unable to connect to a wireless network with Windows 7 computer laptop.

  After resetting my router netgear wireless home network, I have not been able to access my own network with my laptop. I already had access to the internet with a wireless ethernet cable and ankles bound to the router. After reset the netgear router, I was able to access the internet from two other laptops XP and an Acer mini wireless with no problems at all. But my new laptop Toshiba with Windows 7 could not connect, even if he could detect the network. I tried all day even resort to the ethernet socket and wireless cable, but even that would no longer work. I was able to connect using this same cable attached.

  Hello

  Seems that the Wireless does not work on the Dell.

  This is the process to try to find what wrong with it.

  ------------------

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP 15-AC044TU: how to enable the wifi/connection wireless network in my laptop HP 15-AC044TU win-7 64-bit

  I can't activate the network wifi/wireless connection on my laptop HP 15 - AC044TU win-7 64-bit. I found no adapters wireless network / wifi drivers on the hp site. where can I find it? the key that is used to toggle the wifi?

  Please solve my problem FSA.

  Thank you.

  Hello:

  You need these drivers for W7 wireless and bluetooth for your model...

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

• Error "Windows Media could not find a certificate to connect to the network" when connecting to a secure wireless network with WPA2.

  Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.

  Not Applicable

  Hi StheveOses,

  As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  (Works for Windows XP SP3 as well)

  I hope this helps.

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• A the United Nations connection wireless network

  Hello

  I would like to connect a network of United Nations wirelessly in a House.
  -J' I click on the home network
  - but when I click on the network in question pour me connector it is written "Windows could not connect.
  -I click on help in the resolution of the problem and cannot find a solution

  Would it be possible to help one find a solution.

  Thank you

  Hi gwendolineR,

  Unfortunately, the community of Windows is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

• C7250 connected wireless works with wired ethernet PC but not wireless PC

  C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless.

  Can ping the IP of the PC cable but not wireless computers.

  Can connect to the IP address of the browser and can logon to the wired PCs of wireless computers.

  When the wireless PC is connected to the network with ethernet cable the C7250 works perfectly.

  Firewall is not the issue because I tested with the firewall disabled.

  Any suggestions?

  Thank you for your help.

  I FINALLY FOUND a RESOLUTION but let me describe what I've done to isolate the problem so that others will not do the same things I did.

  I used my Windows CE PDA and connected to the wireless router. I made sure that IE could access a different print server wired for a Brother HL-2140 I 192.168.2.10 and it worked. Who checked out that IE was working with a wired device. I then went to Yahoo!, and it worked. Then, I tried to access the C7250 configuration using IP 192.168.2.20 address in IE and it failed. (I checked with my Wired PC I could have access to the configuration of C7250 via IE.) I expected this result.

  Then I connected the PDA via USB and verified that I could use it to access the configuration of C7250 use IE on the PDA and it worked.

  I then tested between two wireless PC. Could not connect to each other through the router. But if one of them has been wired and one wireless they connected and I have consulted the disks between computers. I also tested the two cables with the same results.

  THE PROBLEM WAS IN THE ROUTER.

  These tests again virtually eliminated all PC, firewalls (since I've tested with the firewall disabled), the C7250 and the print server for the HL2140 brother as being the source of the problems.

  I then updated the firmware of the router to the latest version and repeated all the tests carried out in the complete thread and had the same results.

  RESOLUTION:
  The router I was using was a Linksys WRT54GS Ver 1.

  I also had a backup router which is a Linksys WRT54GS 7 worm that had the same settings as the Router 1 worm.

  I changed the SSID of the original router (Ver 1) so I would not need to change the SSID in all my devices during testing with the router Ver 7.

  I checked the firmware on the router worm 7 was the later and pulled up.

  The first test I did was to use a ping wireless PC the C7250 192.168.2.20 and it worked!

  I then used the wireless PC and IE to access the configuration of C7250 192.168.2.20 and it worked!

  I then checked the port for the C7250 was still a TCP/IP port to 192.168.2.20 and sent a test page to the printer and it worked!

  I consulted quickly wireless configuration C7250 and printer a test of a PC cable page and that worked!

  Finally, I tested PC wireless wireless PC PCand wired PC and the dirves successfully in both directions and checked that PC wired to wired PC was still working as before.

  All that remained was to supply two routers and router swap 1 worm with the Ver 7 router and rerun the tests with the router to Ver 7 manage my real network. Everything works as it should.

  I'll keep Router 1 worm as a backup to the Ver 7 knowing router unless the router worm 7 does not only feature that I lose when I reinstall the Router 1 worm is wireless connectivity to wireless, and I can temporarily work around until I get another router that is likely to be a "n" because what is have is ' G;

  THANK YOU FOR ALL YOUR HELP PRINTDOC!

  PRINTDOC BRAVO!

• Unable to connect wireless network said: unidentified network.

  I'm trying to get my computer to get wireless access and I know the code for the network, but when I do it loads then passes over the network, but it says that I have access limited and says its on a network not identified so that I can't go online or anything that involves the Internet. WHAT SHOULD I DO?

  Hello

  1. have there been recent changes to the system before the show?

  Method 1:

  Follow the link and reset the TCP/IP settings and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 2:

  Follow the link below and run the network troubleshooter and check if it helps.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the link below and update the NIC drivers and check if that helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that;-isn ' t-work correctly

  For more information see: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  http://support.Microsoft.com/kb/313242

  Let us know if it helps.

• yellow sign on in Device Manager network controller (failed to connect wireless network)

  Hi all

  It is almost 3 weeks, I tried a lot of solutions several times, but nothing has worked. I have windows 8 on Lenovo 500, model: 20236. Once, I uninstall network controller in the Device Manager and tried to update again, but he failed. Now I am unable to have wireless internet connection. I tried the Driver Downloader, but nothing has worked. I also tried to install driver lenovo Center but Device Manager detects no driver installed. I have attached a few images to make my problem clear. in 1 picture you can see that there is a yellow sign on network controller and what response he gives the discount. in the 2nd picture, you can see the wireless network connection is missing.

  If one of you could help me. Seriously, I would be really grateful. Hanks in advance.

  Hello

  Please contact Microsoft Community.

  The main reason for this is that they at least have a device that is not working properly. We get generally 18 error code if there is a problem with the device driver, which is most of the time fixed by uninstalling and reinstalling the drivers.

  For reference:

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123/en-us

  Try right click on the unknown device and scan for changes on the hardware and check if this changes. Unknown devices you see is basically not plug-and-play devices. The list under the unknown is not plug-and-play device.

  You can read the following article and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

  I hope this helps. Please let us know the results. Feel free to write us again for any help.