Hi everyone, I hope someone can answer this, I did have an update of windows for 3 weeks, is - this normal?

Similar Questions

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I lost a dll and you want it redownload hope someone can help me where to find it

  I lost a dll and want to redownload it it is C:\PROGRA~2\MYWEBS~1\bar\1.bin\F3SCRCTR. DLL hope someone can help me where to get this thank you very much in advance

  Judy

  Hello

  you do NOT want that download again!

  who is called My Web Search and features of malicious programs that are associated with

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Hi I hope someone can help. I find that when I increase the clarity on an image, it becomes very noisy/grainy. I told myself there is a tool to Denoise, but I can't seem to find it on lr5. I watched the tutorials, but they seem to be for lr4

  Hi I hope someone can help. I find that when I increase the clarity on an image, the image becomes very noisy and grainy. I told myself there is a tool to Denoise images but I can't seem to find it on lr5. I saw a couple of tutorials but called lr4 lr5 not. Help!

  Judging by the before and after shots, the original was very underexposed and you he cleared up in LR. Where only a small amount of light enters the camera, these pixels have a weak signal (image) / noise. Subsequent clarification editing software will make the sound a lot more visible, much larger than a dose of clarity. Conversely, lower the tone of an overexposed image will produce an image with less noise because S/N, in camera was higher. For this reason, it is advised to give, if possible, the exposure as much as possible without exceeding the point of clipping to the brightest highlights. In this case, with the sky in the background, you probably might not have increased the exposure of many, but you could bring the sky just before clipping, relying on the capabilities of Lightroom's sophisticated recovery allow to darken the sky during editing, which would have reduced the amount of required clarification for the pilot and the trees.

• I hope someone can help.my p7-1054 has a black screen

  I hope someone can help.my p7-1054 has a black screen

  Hello

  Follow the steps listed in the link below

  http://support.HP.com/us-en/document/c01896806

• Hi hope someone can help? I have acrobat pro, 6 have worked well for the past two years but then just stopped working. Have reinstalled but still won't open, ronning windows 7. Help please!

  Hi hope someone can help? I have acrobat pro, 6 have worked well for the past two years but then just stopped working. Have reinstalled but still won't open, ronning windows 7. Help please!  Janice

  Hey janicem42177174,

  Adobe does most support the installation and use of Acrobat 6 because it is a very old version that is not compatible with Windows 7.

  I suggest you to please use the latest version of Acrobat 11.0.10 is perfectly compatible with your operating system with its functions and improved functions.

  You can download a free trial version of 30 days of Acrobat from here:

  Download Adobe Acrobat free trial | Acrobat Professional XI

  Let me know how it goes

  Kind regards

  Ana Maria

• I downloaded and installed creative cloud with no problems. From the window of creative cloud cannot display the APPS page (while other 'Home', 'Community' can be seen). This is why I can't select the application to be updated. Thanks for your help

  I have download and install creative cloud with no problems. In the window of creative cloud cannot display the APPS page (while other 'Home', 'Community' can be seen. This is why I can't select the application to be updated. Thanks for your help

  Please refer to the threads below where the issue has been addressed:

  Re: desktop is not displayed Panel apps? PC

  Missing Creative Cloud Desktop applications tab

• I have a vision of windows for Adobe Creative Suite 4 Design Standard, can I use the same serial number as

  I have a vision of windows for Adobe Creative Suite 4 Design Standard, can I use the same serial number with Mac?

  Unfortunately, no. Creative Suite serial numbers are specific platform: Windows only or Mac only.

• How to convert ObjectProxy object [no one can answer this question?  :(]

  Hello

  Calling a web service with the resultFormat value e4x. When I get the result, it is in XML format. What I need is to convert it to a custom type, object of value (which is actually a class generated from WSDL). I couldn't find a way to do this. So I used a SimpleXMLDecoder to decode for a generic object. Now my problem is that all objects nested inside this generic object are of type 'ObjectProxy '. So I can't convert them my nested valuables.

  So now I finally need is one of the 2 following things:

  1. a way to convert the ObjectProxy to my custom type value object.

  Or

  2. a way to directly analyze the XML result to my type of Custom value object.

  Please let me know if I need to provide some details.

  Help, please... This one is really kill me now...

  Thanks in advance!

  I know the poster original for that matter will probably not get it, but it is not the intention of this post... I just spent the last 6 hours trying to find the answer to the question: How do I convert an ObjectProxy to my object?

  Well here is the answer for any other googlers who find this post (as it is on the first page of results for "objectproxy object cast")

  Let's say you have a service call which returns a generic object type.  "In the SOAP, you might see the xml tag resulting as.  In flex, it almost always will convert this to an ObjectProxy class.  You will find that out the object isn't exactly simple and cast to the desired type is also is no more.

  Here's how you do it, and it's actually VERY simple once you know what you need to do:

  First of all, you must convert the ObjectProxy in an object type.  To do this, you must use the namespace "object_proxy" itself.  Here's the code to do

  Import mx.utils.ObjectProxy;

  Import mx.utils.object_proxy;

  var myObjectProxy:ObjectProxy = new ObjectProxy (myStronglyTypedObject);

  var obj:Object = myObjectProxy.object_proxy::object;

  This code there will be 'myObjectProxy' and pull on the original object in a general object variable (NOTE: the reference to object is read only according to the docs.)  It is only half the battle though, as at the time, you still need to throw your object to return.  I've read in several sources that you can use a method "as MyType" to convert the object from there, but I couldn't get this to work.  Traditional molding (i.e. MyType (obj)) leads to a runtime error as well.  They can work for you if call proxy your object from an existing flex object, but will NOT work if you tire of an ObjectProxy response service.  Either way, however, the solution is just shorter to type in the case that you he shot of an intervention of service call:

  import com.adobe.serializers.utility.TypeUtility;

  obj = com.adobe.serializers.utility.TypeUtility.convertToStrongType (obj, MyType);

  (if you are unable to access this method, you should probably add the serializers.swc of the framework to your build path:)

  Adobe Flash Builder 4.5 root Directory\eclipse\plugins\com.adobe.flexbuilder.project_4.5.1.313231\dcradSwcs\4.5\libs\s erializers.swc

  This will convert your object to the type you want it to be.

  AND YOUR DONE.  No more looking for people to answer full and not more to convert your service calls to e4x instead.

  Now, if you want to know why it works but casting is not sticking around... If you don't like it, don't waste your time to read the rest of the present:

  Why that your other service calls can analyze data from a response xml SOAP at any predefined by the SOAP service, but casting this type proxy version does not work?

  Your service calls are generated dynamically from the SOAP data, then of course flex "just don't know" how to do... and your SOAP objects do not extend the object class... so what gives?

  If you look at the web service generated dynamically in flex code, you will see that each service call says what should be the result type.  Then the whole AbstractOperation (your client-side web service class) is given a convertResultHandler function that retrieves the data from the result and converts the type defined by the service.  You will not get very far just look at the code if it's away from the abstract.  But if you look at the code of serializers.swc update (you'll have to decompile it) will give you an idea of what it is that makes handler function.  Basically, this handler function takes and checks whether it is an ArrayCollection/table collection or an object and then differs from conversion of the object/table to separate the functions called 'convertToStrongType' and 'convertListToStrongType '.  These functions take a class in your object, convert it and return the past of conversion class.  Bingo.

  Now, you'll see that you can take this object and use the functions convertToStrongType and convertListToStrongType with the EFA serializers to run the conversions you need.  The advantage of this is that these functions are the SAME FUNCTIONS ACCURATE who manage the conversion of your objects in the webservice result, so you can pretty much bet that you will lose all the data like you would with reflection level unique and such utilities.

  As a side of the usefulness of this note.  If you have a c# return of web service which returns a type of list object, which means you can run in all kinds of different items in the same list, then you can use this in conjunction with a mark of the object function to determine the object type to perform conversions.

  I REALLY hope this helps some other people to save themselves from pulling their hair or lose whole days trying to figure the answer before moving on to some power of the wall facility that will make your code more complex!

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• I can access the internet in safe mode with networking; then for a short period in normal startup; but then I lose online access.

  Windows XP: internet connection

  Windows XP: I access to internet in safe mode with networking; then for a short period in normal startup; but then I lose access (IE8, Google, AOL) online. I tried several times, sometimes it seems able to stay online as long as I'm using the installation, but if I take a break, I lose access and return in safe mode.

  This question is submitted in safe mode with networking

  Hello

  Normal mode try to know what actually is the problem with the Internet connection and the components involved.

  Maybe this can help.

  For the wire connection - http://www.ezlan.net/debug.html

  For a wireless connection - http://www.ezlan.net/wireless.html

• Can someone please answer this question... I asked 15 times with NO response

  I have a file of results of php and the index html file - and I want just the results to run...

  I learned that it is not possible in British Colombia and that there could be a way to do something different.   ANY HELP?  PLEASE?

  1128CreativeSolutions wrote:

  I have a file of results of php and the index html file - and I want just the results to run...

  I learned that it is not possible in British Colombia and that there could be a way to do something different.   ANY HELP?  PLEASE?

  Cannot run PHP or any other scripts aside server in British Colombia. Please tell us more about your condition, and we can find a BC solution for you.

  See you soon,.

  -mario

• Firefox asks me if I want to save login or password information more. This option is no longer available or I inadvertidly checked a box in preferences by mistake? Hope someone can help, thanks.

  I registered today with the help of firefox and when I logged in I was not asked if I wanted to save my log in details.

  If you are not using Windows instead of tools > Options use:

  • Linux: Edit > Preferences
  • Mac: Firefox > Preferences
  • Windows: Firefox > Options or tools > Options

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.com/kb/private+browsing

  To view the history settings and cookies, choose: Firefox > Preferences > privacy, choose the setting Firefox will: use the custom settings for the story of

  • Uncheck the box: [] "always use the navigation mode private.

• Question about Messenger's Hotmail (couldn't find the appropriate above heading, but hope someone can help me)

  This is regarding Hotmail and Messenger to the breast.  Every time I answer an e-mail or send one to someone in my contacts list, the next screen goes to "Do you want to add this person to Messenger" it's a pain having to click on 'no' every time especially if you are engaged in a back and fourth conversation.  I have looked everywhere and cannot find a way to prevent this default value for this question.  Can someone please help/Advisor.  Thank you.

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.live.Messenger

  Discussions in Windows Live Messenger

  They will help you with your WLM questions when repost you your questions in the highest Windows Live Messenger Newsgroup.

  See you soon. Mick Murphy - Microsoft partner

• Post my crash report in the hope someone can help.

  bp-5d3f4251-41c2-449c-b8df-12ddd2140416 4/16/2014 1:59 PM
  bp-d4457277-8fab-40a0-947a-f30572140416 4/16/2014 9:18 AM
  bp-4120be29-b0f9-40c4-8798-23efd2140416 4/15/2014 6:03 PM
  bp-6ec99c93-5331-4c67-9629-de5492140415 4/15/2014 1:10 PM
  4ab306c2-d15c-4527-a24c-02634f0b4621 4/12/2014 12:21 PM
  

  After spending too much time and try everything suggested (thanks everyone!) Finally, I realized that it was HTTPS Everywhere extension which was the cause of the accident. Once that has been disabled (yesterday) I have not crashed once. I can experiment in another day or two (if I don't crash), turn it on and see what happens. I thought it was a FF extension so not really sure why it could cause outages. FF should certainly look into this and fix the glitch or warn users of the potential problem.