Hi I am using jdev 11g when I try to create the database, I get this type of error massage

Similar Questions

• I use XP and when I try to open Outlook Express I get this message. "Outlook Express could not be started because MSOE." DLL could not be initialized. Outlook Express is not installed properly

  Last night, everything seemed normal. When I try to open Outlook Express, I get this message. "Outlook express could not be started.  The application could not open message store outlook express.  Your computer may be out of memory or your disk is full.  Contact Microsoft Support for assistance. (0x800700C1, 193) "after this message, the message above was posted. I bought and ran a program called FixCleaner with the same results. I also cleaned my disk and more 66 G remains to use and have a lot of available memory.

  Thank you all for your help, but I gave up and took it to my computer guru and fixed it. He said there where a few old accounts in the computer and registry was messed up and it solved the problem and now it works.

  THANKS again!

• When you try to publish the site, I get an unknown authentication error. (Shared_Unknown_Error:80)

  When I try to publish the site, I get an authentication error. My account is up to date and I can't connect to my account.

  Hello

  To resolve this problem, you will need to disconnect muse and connect again.

  Here are the steps to the disconnection of Muse:

  1. help > log out.

  2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

  You should be all set.

  Concerning

  Vivek

• When I try to create an account, I get a: = 403 Forbidden error

  I'm setting up eprint for my new Oggicejet HP 6700 Premium.  When I try to create an account, I get the error of the object (403).  What I am doing wrong?

  Hello

  Please try another web browser, OR clear all the cache, history and cookies, then try again.

  Kind regards.

• I sent a document to sign using echosign. When I try to open the document, I get a message that says the script is busy. What can I do

  as said in the question, I was sent a document to the signature using echosign. When I try to open it, a screen pops up saying script is busy. I have the choice to continue or cancel. I chose to continue and nothing happens. a message left next to Mozilla Firefox indicating does not. Yet once the same screen on script appears again. If I use Internet Explorer, it will open. But I don't want to use I / E. Also, I go to a site called hpcau and the log in page appears. When I try to log in, my information disappears and the journal is empty. What can I do?

  Hello, wool here EchoSign support.

  Although we do not think that there is nothing wrong with EchoSign in this situation we would be grateful if you could submit a case to EchoSign support to [email protected] so that we can consider the issue a little more. Also, please include a screenshot of the error occurring if possible.

  Thank you
  EchoSign support

• When I try to delete the folder, I get: "this item is not found." But...

  This applies to a group of what were empty folders.  I can rename files, move them, even to save new files in them.  But when I try to delete a file, I get the message that the file is not found.

  I tried to boot mode safe with the same results.

  I checked the security properties, and I have full access.   I also ran Norton AV against records.

  Try this tool.
   
  Unlocker File Remover
  http://www.emptyloop.com/Unlocker/
   

• 57F error code I have Vista and I am running MS Office 2002 for students. When I try to install the updates, I get this error code. Until a few months ago I had no problem with the installation of updates for MS Office 2002

  Ideas:

  • Programs that you have problems with MS OFFICE 2002
  • 57 E error messages
  • Recent changes made to your computer NO
  • What you have already tried to fix the problem error code search

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi halecky6,

  Welcome to the Microsoft answers site!

  (a) update you are trying to install? (It would be better, if you can provide the number of KB)

  (b) are the other updates related to Windows from installing on your computer?

  I suggest you try the following steps:

  Step 1: Disable the software security and then try to install the update

  Note: Activate security software once the test is completed.

  Step 2: Download and install the update in the clean boot state

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  After starting the computer, download the update manually and try to install it.

  http://www.Microsoft.com/downloads/en/default.aspx

   

  Note: Return the computer to normal - reset the computer to start as usual (follow step 7 in the link) once everything is done.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  You can also post your question on the office community, please visit the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer crashes when you try to make the list of associated file types. Error: 0xc0000005

  This is the view in the general tab of the event viewer. Looks like a problem ole32.dll but I don't know what to do. I have Win 7.

  The failing application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aeba271

  The failed module name: ole32.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdac7

  Exception code: 0xc0000005

  Offset: 0x0002af88

  ID of the process failed: 0x1bfc

  Start time of application vulnerabilities: 0x01cafc16e3fb0780

  The failing application path: C:\Windows\Explorer.EXE

  The failed module path: C:\Windows\system32\ole32.dll

  Report ID: 605a0c40-680a-11df-b86a-001e90f0c8af

  Thank you

  Brian

  Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.
  Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.

  Try a clean boot, or boot into safe mode.  The behavior persists?

  If you continue to experience the problem, consider creating the hierarchy of following registry keys in the registry:

  HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\

  In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata.  Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen.  It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrivefile.

  (Letter is an environment variable that represents the system drive, usually C:.)

• After update Premiere Pro, when I try to run the application, I get this error message: "the Application could not start correctly (0xc0000142). Click OK to close the application.

  Need help with Premiere Pro, worked fine until I upgraded to running.

  Hey Kevin,

  Need help with Premiere Pro, worked fine until I upgraded to running.

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• I use TDE tablespace encriptación and backup is performed (no encriptación rman). I get the error message when you try to restore the database

  I use TDE tablespace encriptación and backup is performed (no encriptación rman). I deleted the database and try to restore the backup. I get the error when you try to restore the database with rman restore database.

  ORA-19870: error when restoring backup piece + FRA_DG, oratst, backupset, 2015_03_2

  ORA-19913: could not decrypt the backup

  ORA-28365: portfolio is not open

  About what I know, you should be able to RESTORE the data, but no RECOVERY without portfolio being opened.

  Check the value of the variable environment - ORACLE_UNQNAME

  It has everything first a correct value and try to open the wallet.

  HTH,

  Pradeep

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

  I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

  Hello

  Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

  Hope that helps!

  Kind regards

  Sheena

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

  Thank you

• I have Acrobat 9.5 and when I try to create > pdf from a scanner, it shows an error "Adobe acrobat has stopped working". Is it possible that I can use this feature?

  I have Acrobat 9.5 and when I try to create > pdf from a scanner, it shows an error "Adobe acrobat has stopped working". Is it possible that I can use this feature?

  Providing you have Acrobat 9 installed in an operating system for which Acrobat 9 is compatible then you can use the feature.

  So, you need a scanner connected, turned on, and the software installed. Acrobat 9 "prefer" TWAIN drivers.

  Always visit the site of the provider of the Analyzer and download - install the latest version of the greatest software.

  n.b., The Acrobat 9.x product family moved in the middle of the "End of Support" year 2013.

  Thus, the family of products Acrobat 9.x is not compatible with contemporary operating systems.

  Be well...