Hi I have a computer laptop g56 and I get this error message

Similar Questions

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm trying to send some pictures of my photos and I get this error message

  I'm trying to send some pictures of my photos and I get this error "host 'SMTP' could not be found. Please check that you have entered the server name correctly. "Account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D" can someone help me

  What email program are you using? Unless you use an e-mail client, start a new message, and then attach the photos.

• My outlook express has stopped working and I get this error message, "the connection to the server has failed..." »

  My outlook express no longer works and I get this error: the connection to the server has failed. Account: 'pop-server', server: 'pop-server', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E. Can someone tell what to do?

  Make sure that you can access your e-mail via webmail, if you have this option to ensure that it is not a problem on the server.  Then locate the antivirus interference and ensure that the analysis of the electronic mail is disabled (see www.oehelp.com/OETips.aspx#3).  Try to remove your e-mail account and then close OE and then add it back again and then see if it works.

  Steve

• Firefox does not open and I get this error message

  When I click on the firefox icon I get this error that says Firefox your profile cannot be loaded. It may be missing or inaccessible.what it dose average! How can I save my internet!

  create a new profile

  • Use the Profile Manager to create and delete profiles Firefox

  and transfer of the old stuff

  • Recovering important data over an old profile

• my email receives the e-mail and sends only very short. Nothing more wrong through and I get this error message

  As my title States I can receive email fine, attachments and all.  But when I try to send email I can send only very short.  Nothing more and I get the following error message:

  An unknown error has occurred. Subject 'test', account: ' pop - server.triad.rr.com', server: ' smtp - server.triad.rr.com', Protocol: SMTP, server response: ' 421 4.4.2 service timed out. ', Port: 25, secure (SSL): no, Server error: 421, error number: 0x800CCC67

  It started just yeaterday, everything has been fine so far

  Thanks much for any help!

  Glad you solved it.

  It can be compacted at this place. There is an option to compact the database on shutdown after X works.

  If you keep WinMail open most of the time and let the computer sleep, place during about 10 tracks. If you open and close WinMail daily, place during about 75 ~ 100 races. When you close WinMail and have reached the setting chosen it will inspire you to compact. It is enough to click OK and don't do anything until it's done. It should take only a few seconds if you do this regularly as stated above.

• I tried to upgrade from Microsoft office 2003 and 2007, and I get this error message: Error 1606 could not access network location %AppData%.

  Now, I can not uninstall, repair Office 2003 or 2007. and my microsoft office 2003 documents are less error out when I try to open them.

  Hello Answerspls09,

  Thanks for providing the information.

  Solution:

  Check with the below weblink.
  __________________________________________________________________________________

  "You receive an"Error 1606"error message when you try to install or remove a program from Microsoft"

  http://support.Microsoft.com/kb/886549

  __________________________________________________________________________________

  ["Windows Installer Error 1606" error message when you try to launch help in Office 2000 programs]

  http://support.Microsoft.com/kb/313257
  __________________________________________________________________________________

  That should solve your problem.

  Thank you. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• My computer broke and I get this error message

  "ERROR: no disc thrust was detected or the disc has failed."

  What is c?

  Someone please help!

  This means two things. When the laptop fell it damaged the hard drive and must be replaced. There is a chance that it was only dislodged & lost a secure connection. Remove the Panel covering the hard drive and check that it is correctly connected. If no change-look for a new hard drive.

  If you need help with any of this post back with number of model/product full of your laptop.

  http://support.HP.com/us-en/document/c00033108

• Try to update the current Web site and I get this error message

  I can't update my dute site to "An FTP error" when connecting to the server. See attachment below. I have another site and I have day yesterday without problem.

  I use: Windows 7, IE 11, Avast Antivirus, DW CS6, Go Daddy is my host.

  Thank you, Mariola

  

  Check your FTP credentials.

  Lost random access with GoDaddy in the past. They have "updated" the server and lost your credentials in the process.

  You can also activate or use the FTP Passive mode and performance optimization in your FTP site settings.

  Also check that you are using the folder root correct server. I think GD still use / public for this. It's been a while since I've dealt with them.

  If none of these things make the case, we will need to take a look "under the hood" so to speak. Post a screenshot of your FTP (change any sensitive information) can help.

• Im trying to install a printer and I get this error message

  "the WIN16SUBSYSTEM has BEEN UNABLE to ENTER PROTECTED MODE, DOSX MUST BE in YOUR AUTOEXEC. NT AND PRESENT IN YOUR PATH, then it wont let me load software with what happens when I run the cd printer and suddenly the installation button to install the software

  I wonder if this CD is for Windows XP.  Try to connect to
    http://support.Lexmark.com
  Then, locate your printer and download the driver that it is displayed.  It should come with instructions for installation.

  HTH,
  JW

• I try to install Muse and I get this error message from the request of Bishop.

  We encountered the following problems:

  Please connect to the internet, and then try again.

  I am connected!

  Check if it helps. http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I have lightroom 2 and had improved to 3 but my computer crashed and I try to install lightroom 2 since I have a drive and I get an error message

  I have lightroom 2 and had improved to 3 but my computer crashed and I try to install lightroom 2 since I have a drive and I get an error message

  What is the error message?  You can install version 3 without having to install version 2.  You'll just need the serial number of the version 2, when you go to turn on version 3.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.

  I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.

  Please specify the version of Mac OS for reference. just in case if the procedure below did not work.

  N ° 1)

  1) click the icon of the Apple menu and select System Preferences, and then click Network.

  (2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).

  (3) then click on the Advanced button, then click proxies.

  (4) slot 'Select a Proxy Server to configure' uncheck all the boxes proxy, then uncheck "Use FTP Passive Mode (PASV)".

  (5) then click on the Apply Now button.

  Then try to reinstall Adobe Creative cloud,

  Always the same?

  (1) right click on the Finder on dock icon and select the option "Go - To Folder."
  (2) you will get a text box, type in below mentioned command and then press 'return '.

  / etc

  (3) it opens the etc folder, please search for the file named ""host " and copy the same office screen.it"

  (4) double click on the Hosts file, it will open it with TextEdit.

  Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

  
  

  
  

  
  

  
  

  
  

  
  

  ------------------------------------------------------------------------------------------ -
  

  No entry to Adobe? You can follow the procedure below:

  -----------------------------------------------------------------------------------------
  

  Please follow the steps below:

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  
  

  
  

  Step 2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  
  

  Step 3)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe

  Open file Adobe and trash folders named AAMUpdater, Adobe Application Manager and OOBE.

  
  

  Step 5)

  
  

  
  

  Click on the link below and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Click on the link and download file DMG cloud creative Installer directly below and install Adobe Creative Cloud app:

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_0_0_74.dmg

• I lost the ability to upload files to a Web site. I transfer files from my computer to a web site and I get an error message "the connection was reset" and the file will not download. I try to transfer the photos and I get the same message.

  I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.

  Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.

• trying to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.ba

  I try to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.bat.  I don't know what is a mode of administration, nor I know what is a pdfdriver.bat. Can anyone help?

  Hello

  1. what operating system do you use?

  2. what web browser do you use?

  3. have you made changes on your computer?

  4. What is the brand and model of the printer?

  5. are you able to print from other applications?

  When a printer is installed, members of the Administrators group on the computer are given permission to manage the printer by default. If you have an administrator account, you can probably change the printer properties. Otherwise, you must obtain permission to manage the printer before you can change the properties of the printer.

  Method 1:

  If you are using, I suggest you send the link to learn how to open a session as an administrator.

  How can I connect as an administrator?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-log-on-as-an-administrator

  Method 2:

  I also suggest you to see link and check.

  Error when printing to a PDF file: PDF driver is not found

  http://Quicken.Intuit.com/support/help/error-when-printing-to-a-PDF-file--the-PDF-driver-cannot-be-found/GEN82191.html

  Cannot print from Quicken

  http://Quicken.Intuit.com/support/help/not-able-to-print-from-Quicken/GEN82237.html