Hi I have a HP Photosmart C4680 beep!

Similar Questions

• How to scan to PDF? I have the HP Photosmart c4680 printer and m7-1015dx Pavilion computer.

  How to scan in pdf format. I have printer hp photosmart C4680 & pc hp Pavilion m7-1015dx Entertainment, using the Windows 7 operating system.

  The computer only allows me to scan all the documents in for example jpeg photo format. My old computer has a program called HP solution center this permit scan me to PDF.  The new configuration of hp can only scan to the size of the photo. How can I fix it, so can scan documents to pdf format?

  Hi, you probably need "Full Feature software and Derivers" at the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=au&dlc=en&sw_lang=&product=3739150#N193 if still does not work. Please try to download and install for free a product called PDF24. You can open this program and import from a scanner, you can also use this program to edit the scanned or as pdf documents. Here is the link to download: http://en.pdf24.org/pdf-editor.jsp best regards.

• Missing cartridges on Photosmart C4680 printer... It work?

  I have a HP Photosmart C4680 printer that appears in great shape.  It was given to me by a third party.  The two print cartridges and power cord are missing.  I have no idea if this printer will actually print.

  1. Assuming I can start her, is it possible to determine if it will print before you run out and spend the money on 2 new cartridges?
  2. Can I use a power cord to similar research?  I have one who comes from a different model of printer but seems similar.

  Thank you!

  There is no way to determine if the printer print without cartridges from the printer. If the cord will work for the printer you use.

  Let me know how it goes.

• HP photosmart c4680 don't scan to Mac

  I have a hp photosmart c4680, the functions of the printer and copier are working well. However, it will not open scanpro and does not scan documents or photos on my Mac. I uninstalled and reinstalled the printer and still the same issue.

  Hello

  As you mentioned that you have the HP Scan Pro application, the software is not intended for OS X 10.6.

  Make sure you completely remove the software as follows:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Next. Download and install Snow Leopard software below:

  http://FTP.HP.com/pub/softlib/software11/COL27838/MP-69219-2/PS_AIO_05_C4600_NonNet_Full_Mac_WW_108.dmg

  After completing the installation. Make sure to restart the Mac and install the updated HP by ringing the Apple icon and the software update.

  Kind regards

  Shlomi

• HP Photosmart C4680 duplexer

  I have a HP photosmart C4680 pinter and I tried to understand what duplexer is compatible with it. I was going to buy this one: http://www.amazon.com/HP-Duplexer/dp/B0018WRNN6/ref=sr_1_2?ie=UTF8&qid=1294256308&sr=8-2 because it seems to be the only one who would possibly fit (based on the form) but I contacted the seller to be sure and I was told that it was not compatible. Does anyone know what duplexer will correspond to this printer?

  Hello Hopperms,

  I was a bit confused by your response, so I checked with a few collages to be sure. And really, the C4680 does not support a duplexer. The body of the printer can have the possibility to connect a duplexer, but this is probably due to the standard body used for different models of printers. This means that you can put a duplexer, but the unit will not know what to do with it. Sorry to disappoint you.

• HP Photosmart C4680 don't scan

  I have a HP Photosmart C4680 that does not scan. It can print and copy things perfectly, but if I try to scan, it gives me an error message saying "error analysis. Try scanning from compurter or see the documentation. I've been watching other messages of the forum with similar questions, but can't find what they describe on my computer.

  I am currently using a Dell with Windows 7 computer.

  I don't know, but this could be the result of the disc it came with the impossibility to install (it says only Windows XP and Vista).

  Help, please!

  Hi Rsodd,

  Follow the steps described in this document.

  http://support.HP.com/us-en/document/c02450835

• HP Photosmart C4680 scanning problems with Snow Leopard

  I have a HP Photosmart C4680 All in one printer/scanner

  Since upgrading my imac (early 2009 model) to Snow Leopard I have had problems printing and scanning

  My scanner has never worked since the upgrade

  printing has been uneven at best, but seems to be more reliable in the last week or two, since I downloaded the hp apple update the driver through the printing software update on my mac.

  I deleted and reinstalled the driver several times

  but nothing works

  whenever I try to scan something my printer, the hp scanning software begins to open on my imac, and their broken quickly

  If I try to open the program to scan my iMac, it crashes

  Help!

  I need to be able to use the scanner

  That is why in the first place, I bought the printer/scanner combo

  You must run the cleaner, if the question of fixing is not a standard uninstaller program.

  Uninstall in itself is not always solve the problem, so there is a 'scrubber' in the software that really cleans things out.*Note * run this will remove all software that has been installed, HP so you will need to reinstall all other HP printers that you have configured.

  Go to Applications/library/Hewlett Packard / click Uninstall HP

  Click on continue

  Highlight your device in the left pane

  Hold down the Ctrl and Opt, as well as Apple and click on uninstall

  There will be a pop up that asks if you are sure you want to uninstall all hp software.  (At this point, if you continue, all HP printers you have installed will need to be reinstalled, this is why we do not run this thing all the time)

  Click on continue

  Let the brosseuse it is.

  After that, add your C4680 with printing and fax and let the operating system to search for updates and others. If it asks you if you want to download them, accept you.

  Who should take care of it.

• I have a photosmart C4680 and I want to scan a picture to my computer. How can I do this?

  I have a photosmart C4680 and I want to scan a picture to my computer. The computer is a HP Windows 7 64 bit Vista.

  Try reading this:

  http://support.HP.com/us-en/document/c02453257

• I have a problem with the HP Photosmart C4680.

  Hi... having a printing problem... pages of windows 8 are blurry printing... have you tried downloading... yet all first page comes out blurry... but when I print the pages of the HP troubleshooting site they come out all perfect... my computer is an AH512 of Fujitsu Lifebook... of ideas please?

  Hi Colin,

  Thanks for the information.

  It seems that this problem is hardware related. Misaligned cartridges can do that.

  Please refer to the procedure described in the following link to resolve this problem.

  Align the ink cartridges
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01369878&LC=en&DLC=en&cc=us&product=3739150

  You can also consult the steps and the instructions given in the following link:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/Photosmart-C4680-blurry-printing-of-PDFs-and-Web-pages/TD-p/2747519

  For more help on this problem, contact HP support.

  If you have questions about Windows operating systems, help us on this forum.

• HP Photosmart C4680 problems

  I have an all in one printer, the HP Photosmart C4680. Aparently my warranty expired, and support staff can only help me if I pay, blech! So I hope you guys can help me. My printer on each hour and half/2 hours turns off and turn it on again. Now, when he comes on, he's doing it is small thing to beep, but it does not start. The HP symbol will appear on the screen with the little bar downstairs, but then the screen turns off, beeps, and for this, the cycle starts again. It does this for about 15 minutes or so, before FINALLY putting. The printer heads move around, and the screen is a surprise as to what is displayed. I got to go to the screen of the photocopier, screen printing, select your screen language... almost anything! However, the touchscreen does not... at all. Nothing. And it does not print. I tried to get jobs in the hope that it will print, but nothing. Do not print the test pages or anything like that. I tried to uninstall the printer and reinstall, nothing. My computer recognizes the printer very well, and I don't get any errors when I try to print, it just says: 'pending' in the State. In addition, I can not disable the printer! If I hold in the button of power for 20 seconds, it turns off eventually, but an hour and half/2 hours later, it starts as if by magic on! Actually, I have to disconnect the thing to keep it off. I really have a lot of important things to print, and it's probably my printer HP 4 in the last 7 years! It seems a bit crazy to me. This sounds like something that I can fix it? Or should I just go buy a new printer? Thank you!

  Usually problems like this are caused by poor nutrition. Make sure that the printer is connected directly into a wall outlet. Using a surge protector, power strip, or backup power can cause the printer to act up. If this does not help, follow the instructions below to shoot bad food.

  The HP printer does not turn on or respond

• HP Photosmart C4680: my Photosmart C4680 is printing only the white pages

  Hello

  Whenever I try to print something it prints just a blank page.

  The paper through the flow and I heard sounds of printing.

  I tried to clean the ink cartridges, it did not help.

  Please can someone help me with this.

  Thank you in advance,

  Jamie

  I hope that you are well @jamiebally, welcome to the community of HP
  
  I noticed your post on your Photosmart C4680 print white pages and I wanted to stop to share my suggestions to help out you.
  
  Check out this link to fix the problem. If the problem persists, contact HP to see on your replacement options.
  
  The problems of quality of printing to the HP Photosmart C4600-C4700 all-in-one printer series
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!
  
  Have a wonderful day!
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• missing OCR for Photosmart C4680

  Hello-

  Is there an OCR software included with the Photosmart C4680?  I did a full install, but I can't scan to create editable text.  The aid function advises me to select a pdf in text can be added to the output, but this option is not given in the drop-down list.  The data sheet

  http://h10010.www1.HP.com/wwpc/pscmisc/VAC/us/product_pdfs/3739148.PDF

  Speed of scanning OCR (letter) is<34 sec. ="" i understood="" this="" to="" mean="" the="" c4680="" i="" was="" buying="" actually="" has="" ocr!="" i="" looked on="" the="" hp="" site="" and="" got="" the "full="" feature="" software"="" download,="" and="" installed="" it,="" but="" this="" didn't="" help. ="" i="" could="" find="" no special download="" for="">

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=SG&lang=en&product=3739150

  Any help would be appreciated.

  Thank you

  -Steve

  It works!

  And you were right, I had to uninstall and reinstall the PhotoSmart software before you install the OCR software.  I had updated to version 13 of PhotoSmart 12 version that was on the CD supplied with the printer.  I got the message "OCR application is not required" when I tried to install on version 13.   Uninstall and revert to the version 12 allowed me to then install the OCR.  I'll go with version 12, it has everything I need.

  I think it is strange that HP it so hard.  After successful installation, I changed from a customer who felt he was ripped off (after being sold nonexistent OCR) to a satisfied customer!  HP should at least have a link of his C4680 software page to the OCR software and indicates the software OCR is working on the C4600 series.

  Anyway, thanks a lot rhanman for your help and for the time and effort in replying to my query.  I greatly appreciate it.

• PHOTOSMART C4680: paper clear jam c4680

  ABOVE C4680 PRINTER HAS A PAPER JAM THAT I CAN'T ERASE. SPECIFICALLY PRINTING A LABEL AVVERT SHEET 4 IN. WIDE THAT STUCK & BROKEN DURING THE COURSE OF THE POWER INPUT. NEED TO MAKE JAM THAT I CAN'T SEE OR FEEL.

  THANKS JOHN

  Hey @venny1,

  Welcome to the forums!

  I understand that you have a paper jam on your Photosmart c4680. I can help with that.

  This document describes How to troubleshoot a paper jam in the printer. Please let me know if it helps. If it then please let others know by clicking on accept as Solution below my post. If you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• HP Photosmart C4680 problem

  In recent days, I noticed that my Photosmart C4680 is blower bike itself on and off.  Anyone else have this same problem?

  Does anyone know why its doing?  Y at - it a solution?

  Just do the repair. It was a bad capacitor on the logic board (TEAPO brand). There's that one to replace on this printer and it will probably look like curved on top (which indicates which are blown).  It is 330uF 6.3V, but I got in a little bigger (16V, whatever they had in 330uF) and it works perfectly now. It's an easy fix, if you aren't afraid of soldering a component. It will cost about 60 c with a value of components. (and a kit of solder so you do not have a)

  Open the scanner cover and the door of replacement ink. Reach behind the control panel and gently push a clip for the exit sign. He will reveal a hidden torx screw. There are four total screws to remove the top, and you can use a torx bit, or if no practice, the right to an allen key size.

  Once you get the top up the rest of the printer, you must pull carefully on some connectors that attach to the logical map of its orbits. Some are simply Ribbon connectors and some wire connectors. Set the top aside.

  Identify the bad capacitor on the Board by checking the upper surface. It is a green, a thin color that says TEAPO on it and if it is indeed the defective component it must feel to be curved on top.

  Remove all the other connectors on the Board and unscrew 3 torx screws to remove the Board of Directors of the printer.

  To unsolder the bad capacitor, it can be easier at first it break so you can extract each lead with pliers, one at a time when the application of heat on the side welding.

  Respect the polarity, the negative side (identified by the sign on the new capacitor less) on the shady side to the Board of Directors.

  Solder the new capacitor, clip wide leads, any excess back together. Your ' e did!   Good luck!

• Photosmart C4680: Photosmart C4680 on homegroup printer-considered, but not scanner

  My home network includes a Dell XPS-18 running Windows 8.1 Pro and a Toshiba Satellite running Windows 7 Home.  Our Photosmart C4680 is connected to the Toshiba by USB.  It is shared and is available on the network.  It is used by the XPS for printing and never a problem as long as the Toshiba's online.

  However, I can't find a scanner.  I used it for printing without having to install any software.  When I couldn't find as a scanner, I have installed on the XPS, the HP software suite which is available for download from the HP site, in the hope, there was a special driver for scanning, which would be added.  But that does not change.

  The Toshiba can scan from the C4680.  And I can connect to the XPS via USB and also find a scanner by, for example, opening Paint.net and go to "file |" Acquire | From a scanner or camera.  But when the printer is shared via network it is not considered a scanner on the XPS, although I can print to it.

  How can I use it as a scanner on the network?

  Hello

  MS Windows alow God a printer or files and folders, there are not any sharing scanner capabilities.

  Scanning can only be done from the PC that have plugged USB cable, to scan multiple computers, you will need a network connected device, it can be done with a USB device.

  Kind regards

  Shlomi