Hi, I need help with installing updates for CS5
Hi, I need help with the installation of the updates of CS5. I get the following message: some updates to installation failure. My product is already registered. Can someone help me, please?
Erkan please download and apply updates directly from updates.
Tags: Adobe
Similar Questions
-
Need help with the update for my 11 elements
I have 11 items and just switch to the Canon 7 d Markii and shooting in RAW for the first time last night and the editor and organizer elements does not files because it does not acknowledge the BRUTE of the 'new '... device information I tried the update and he offered only a 7.4 update, where the 7 5 d Markii must at least a 8.7 update... How can I get the latest update if my program does not by itself? I DON'T like the way Canon program from the disk provided with the camera is set for RAW images, and I don't want to have to change all the RAW files to only align my items... I enjoyed how the older my camera RAW files were brought in Editor with the pop-up window which allow me to make changes to quick for photos before opening them in the editor... Yet once I don't like how the Canon window works for RAW images... Thanks for any help on this... Nicole
Camera Raw 8.7 was introduced in PSE13. If your software is too old to be compatible. Yu have two choices:
- Upgrade to the latest version PSE14
- Converting your CR2 for Adobe (DNG) Raw and DNG files will work with PSE11
The Adobe's DNG Converter is free, and you can batch process all of a file CR2 by selecting a source folder and destination folder.
-
Need help to install Photoshop Extended CS5 and Photoshop Lightroom 3 on my macbook. No hard drive! I have serial numbers. I paid $1200 for it
Download the competent installers of Adobe
Download Adobe Creative Suite 5 products
Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 3.6
Install, then enter your serial numbers.
-
need help with windows update C8000F1A error code
I need help with an error code that is given to my PC when I try to put up-to-date
Hello
1. don't you make recent changes?
2. This does happen with any special updates or all updates?
I suggest you to follow these steps and check if that helps:
Method 1:
If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareMethod 2:
I suggest you follow the steps in the link below and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesIt will be useful.
-
need help with the Update statement
Hello
I received a question in a course and I tried my best to respond, and now my brain is giving. I would really appreciate help with the update statement. I don't mind if you do not validate a solution, a little nudge in the right direction would be really useful. I'll post that I got.
THE QUESTION
/ * For these agents disabled on more than seven missions, change their date of deactivation of the first date of deactivation of all the agents that have been activated in the same year as the agent that you update currently.
*/
I have it divided into parts, here is my select statement to agents disabled on more than 7 missions, which produces the deactivation_dates in the agents table that I want to update...
.. .and the code for the first date of deactivation for each year of activation agentSELECT s.deactivation_date FROM ( SELECT a.deactivation_date, count(m.mission_id) as nomissions FROM agents a INNER JOIN missions_agents m on a.agent_id=m.agent_id GROUP BY a.deactivation_date ) s WHERE s.nomissions>7 AND s.deactivation_date IS NOT NULL
..... I am not real to marry these two statements together in the Update statement. I can't extract each date of deactivation produced in the first select statement and their match against the first date of deactivation in the year they have been activated for the second select statement.select a2.deactivation_date from agents a2 where a2.deactivation_date= ( select min(a.deactivation_date) from agents a where to_number(to_char(a.activation_date,'YYYY'))=to_number(to_char(a2.activation_date,'YYYY')) )
Any help greatly appreciated... :))I began to wonder how things would :)
user8695469 wrote:
First of all why he chooses the date the earliest of all agentsUPDATE AGENTS_COPY AC /* (1) */ SET DEACTIVATION_DATE = ( SELECT MIN(AGS.DEACTIVATION_DATE) FROM AGENTS_COPY AGS , AGENTS_COPY AC /* (2) */ WHERE TRUNC(AGS.ACTIVATION_DATE,'YEAR') = TRUNC(AC.ACTIVATION_DATE,'YEAR') /* (3) */ )
He recovers as soon as the subquery has not been correctly set in the SET clause. It seems you are trying to update a correlated, but we are still having a conceptual shift. I have added a few comments to your code above and below will explain.
(1): when you do a correlated update it is useful to the table alias that you did right here.
(2): this table statement is not necessary and is the reason why the FIRST deactivation date is selected. The alias that you use (3) refers to THIS table, not the one defined in the update statement. Remove the line indicated by (2) in the FROM clause and a correlated update will happen.
and secondly why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)
user8695469 wrote: then why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)
WHERE EXISTS ( SELECT a.agent_id, count(m.mission_id) FROM agents a /* INNER JOIN AC ON AC.AGENT_ID = A.AGENT_ID */ INNER JOIN missions_agents m ON a.agent_id=m.agent_id GROUP BY a.agent_id, a.deactivation_date HAVING count(m.mission_id)>7 AND a.deactivation_date IS NOT NULL )
Once again this problem is similar to the question above that a correlation update doesn't work. Test existence of lines in an EXISTS subquery. Since your subquery is not related to the table that you are trying to update, it will be always return a line and, therefore, it returns true for EACH LINE in the AGENTS table. To limit the game to only agents > 7 missions results, you need to add a join condition that references the table in your update statement. I added one above (with comments) as a sample.
I recommend you look over all material that you have associated with correlated subqueries, including documents that I posted above. This seems to be what you're having the problem more with. If you need me to explain the concept of correlated queries any better please let me know.
Thank you!
-
Help with software updates for HP Officejet Pro L7500 Series
Five updates have been identified as available when I used 'check the software updates' Solution Center.
All updates failed to download. The updates are:
Update critical HP product Assistant
Critical update for HP memories disc creator
HP update - security update
Updated HP 4.0.12
Update recommended to correct a problem with the sign up now product registration page
TDA, since these updates are not required for your system and your printer that updates could not be installed on your system, however if you want to see what updates are available, then this is the web page to select your printer model, and then select your operating system and you can see the updates you need to update for your printer :
link to select your printer model
Once you click on the link above, you must click your series of model and then in the next page, click on drivers and software download link to see available software for your printer.
Hope this helps you.
-
Need help with installing Windows 7 32 bit / 64 bit editions
I have a laptop that originally had Windows 7 home premium 32 bit oem installed on it, I have subsequently upgraded to windows Ultimate edition through update at any time.
The laptop is retired and I want to install Windows 7 on my new PC but to install the 64-bit versions, but do not have them.
My question is, should I buy a new copy of windows 764 bit home premium. It is also possible to apply my series of Win7 Ultimate upgrade to an another Windows Installer or it will be related to my original OS install and only the 32-bit version?
I hope someone can help
I have a laptop that originally had Windows 7 home premium 32 bit oem installed on it, I have subsequently upgraded to windows Ultimate edition through update at any time.
The laptop is retired and I want to install Windows 7 on my new PC but to install the 64-bit versions, but do not have them.
My question is, should I buy a new copy of windows 764 bit home premium.
No, as long as you have a disc of Windows 7 Home Premium 64-bit, you can use the same product key that was used to activate the copy of 32-bit, you had installed.
It is also possible to apply my series of Win7 Ultimate upgrade to an another Windows Installer or it will be related to my original OS install and only the 32-bit version?
If the Express upgrade is planned for the Windows 7 Home Premium to Ultimate upgrade, this computer must also run Home Premium.
You will need to use the phone for both activation:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usI hope someone can help
I do not have 64-bit Windows 7 Home premium, just a 32-bit version OEM
For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
Given that this option is no longer available, what are your options? See the article for more details:
-
Need help with installing XP on Satellite P200-IEE
I mucked up my work phone thinking I could convert vista to xp by myself, questions of driver and software is the reason. I bought an xp license and have the disc.
My laptop is a Satellite p200-IEE. I downloaded what I thought, was that drivers sata (f6flp32) put in the xp disk and drivers as above on a floppy drive.
It goes, however, loading, ask you to press s and comes then in place with the installer of txt - oem could not be found. Any ideas of what I can do I need my laptop for work Monday morning.HELP Please
There are some problems with installing xp on vista laptop... After talking to toshiba agent he's recovery discs there to put xp on as a straight install normally fails by experience.
Some won't take only short xp. (for one, made this mistake on a new laptop!)Your best bet is the recovery disc and screw with vista, but do not install service pack 1 again... There are questions. Sort of a work in progress for Bill and his friends...
Concerning
Published by: ADMIN
-
Need help with windows update please!
Tried for months now to get windows update to work properly. I still see a message pop up in my lower toolbar, that says: windows cannot verify the updates, with a red x. I'll try to update manually and it shows 0% all the time. When I go and check to see if there have been updated, it will show a little from time to time, who have downloaded successfully, but believe that is made during a unrolled task he is set to make only 1 or two from time to time will show. I don't know what else to do. It's Windows Vista. Help, please... My Windows defender seems to fine day. Help, please... Thank you...
Hello
I guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358Method 1: Start Windows Vista with the Windows installation media and use the repair feature
How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlYou can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlMethod 2: Start the system in safe mode and then use the system restore feature
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can also do a restore of the system of starting with a Vista disk.
Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)
See article below for that.
You can use this method on the updates that have this problem.
http://support.Microsoft.com/kb/949358Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
and install it.Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good. -
Hi my computer tried to install Windows vista service pack 2 (KB948465) and update for Windows Vista (KB967723) security. And he said: updates could not be installed error found: 800 b Code 0100. Can someone please help me get this situated
Hi Corey90,
Welcome to the Microsoft Vista answers Forum!
I have some steps that may help you.
Step 1
1 run (Checksur.exe) system update readiness tool
2 download and run (Checksur.exe) system update readiness tool. After downloading this tool, it runs a scan of a time for inconsistencies that might prevent future maintenance operations.
For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
· Run the preparation tool the link for Windows Vista 64 bit http://www.microsoft.com/downloads/details.aspx?FamilyID=b950e3b1-3267-41c2-8f10-1fe9a4bfa44d system
· Run the preparation tool the link for Windows Vista 32 bit http://www.microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en system
Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100' http://support.microsoft.com/kb/956702
Step 2
You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058
Step 3
Scan the file system [SFC] checker on the computer that replaces the corrupt files on the computer system, follow the steps below.
1. start and type cmd in the box start the search.
2 - Click on cmd in the list programs and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command calls, the following line and press ENTER: sfc/scannow
When the analysis is complete, test to see if the problem you are experiencing is resolved.
Additional information: http://support.microsoft.com/kb/936212
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Need help with the update of Windows (OS-Windows 7)
Hello world
Recently, I met a problem with Windows update on my laptop (OS-Windows 7). Everything is fine with it, but when I try to install updates (recommended or optional) window says that it downloads the updates, but the progress remains to 0KB and 0% downloaded status. I tried to restart the service of windows update with utility update of windows running, but without success. However, I was able to install updates, most of them associated with Microsoft.NET framework 3.5.1 (I'm not sure of the version of the .NET Framework is installed in my computer). But when I tried to install other updates updated security windows or .NET Framework 4. XX version update, he gave the same answer that I mentioned above.
I can give my specifications and other information required if necessary.
Please help me with this problem about the update of windows.
Thanks for your time and your help.
Try the following: set never 'Find updates' automatic updates and then restart Windows. Download and install KB3161608.
http://support.Microsoft.com/kb/3161608
Best regards, VZ
-
Need help with an update query
Hello
I am trying to run a query on a table update. Here's an example: I have 2 tables t1 and t2, and these tables have 2 similar columns, c11 and c12 in t1 and c21 and c22 in t2. I now have to execute an update statement for the column c11 in t1 with the values for the c21 in t2 where the c12 in t1 is equal to c22 in t2. Therefore, the request that I made:
Update t1 set c11 =.
(select t2.c21 from t1, t2 where t1.c11 = t2.c22)
where t1.c11 in (select t1.c11 from t1);
But this query gives me an error: ORA-01427: einreihig subquery returns more than one line.
Where I'm going wrong? Kindly help.Hello
Try
UPDATE t1 SET c11 = (SELECT t2.c21 FROM t2 WHERE t1.c12 = t2.c22) WHERE EXISTS (SELECT 1 FROM t2 WHERE t1.c12 = t2.c22);
When you say
c12 in t1 is equal to c22 in t2
your where clause should be like
WHERE t1.c12 = t2.c22
and you do not need to join the table updated in the subquery that you can refer directly to its columns.
from t1,t2--not needed. Use FROM t2
* 009 *.
Published by: 009 on March 18, 2010 21:04
-
Need help with installing Windows XP on Satellite A60
I have toshiba satellite A60 and I need to know the steps for reformatting the hard drive and installing Windows XP. What do need me and how?
also... How can I save all the files and email on Microsoft outlook? I'm not well experienced with this.
Hello
the XP installation is very simple. Just put the CD in and to start the installation, the installation wizard will guide you through the entire process. A little advice: when it comes to partition the disk, delete the old partition, create a new and format it in ntfs. Don t worry, the installation wizard will guide you very detailed hollow that deal so it's going to go very easily.
Regarding your backup:
It's my way of backing up my files:
I have an external USB-drive HARD drive and I put all my files on it, so I can copy them back after that I have put in a new system. To save your outlook, you can visit this site:http://www.sitedeveloper.WS/tutorials/Outlook.htm
They describe very well how you back up outlook.
Good luck
Welcome them -
I need help with the updates listed below
I tried several times to install updates as follows: KB 2468871 KB 2533523 for my Vista SP2 program with a 32-bit and I get the error message 643 / I use Chrome most of the time, but I also have IE.
You're certainly not alone...
You can try to repair the .NET Framework 4 and if that doesn't work, download updates relevant manually and install the same.
To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.
· Click on start/Orb and click on Control Panel.
· Go to the program and features.
· Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
· You should have the choice to repair or uninstall/change, click it.
· This will then give you the opportunity to fix it
· Select the repair option.
Manual download of updates (just search for the most relevant to your problem)
1. http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27017 (KB2539636)
2. http://www.microsoft.com/download/en/details.aspx?id=3556 (KB2468871)
3. http://www.microsoft.com/download/en/details.aspx?id=27014 (KB2533523)Make sure you download the one appropriate for your system.
http://support.Microsoft.com/kb/827218
Install as administrator.
Addition, it is rather a big discussion here:
-
Need help with Windows Update, error
Whenever I try to run Windows Update, I get an error Code 80070490. Any suggestions?
Hi Claire,
The error you receive occurs if there is corruption in the manifest of component maintenance base. The only way to fix this is to do a "repair" of Windows Vista installation.http://support.Microsoft.com/kb/958044/en-us
The 'repair' installation (upgrade on-site) will not affect your installed programs or data. Just make sure that you are already connected to your computer when you start the installation. Do not boot from the DVD .If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.
- When the Setup program starts and the install now screen, click install now .
- Note When you receive the important Get updates for installation message, click go online .
- Click upgrade when the which type of installation you want? appears
Please let us know if this solves the problem for you.
Matt
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
When I look at apple and listening to the radio to apple, I get a pop up message that says, AirPlay... Send wireless which is on our computer to the screen using AirPlay or iOS device. To find out more... etc. It is BORING. How can I prevent the me
-
Ultrabook Envy6-1100sl: install a 2nd OS on the msata SSD - Envy6-1100sl
Hi, I upgraded my envy6 with 16 GB Crucial RAM and 500 GB samsung SSD evo. After upgrade, I did a clean install of windows 10 and stopped to use the itegrated msata ssd. My question is:Can I install a second operating system on the msata ssd? Can thi
-
This blue screen to me before had taken place. I have read many forums and got to know upgrade drivers Ethernet and when I looked inside, the engines were updated 2012.I their and thought has been fixed and now its new annoys me when I am back on int
-
is it possible to copy a print job on hold on a USB to print to a different printer?
I am out of the country without my printer and have been put on hold a few jobs I want to print from another machine.
-
I work for a University doing tech support and I came across a strange question. Printer Laserjet 6 p in one of the offices of our AHD is ignorant letters or their prayer in the following way: 2013 Summ r NFL r ation Sch In the case of words 'School'