Hi, I need touch screen turn on and off software for my dv6

Hi, I need touch screen turn on and off software for my dv6

You can find all the software, drivers, information available for your model by using the link at the top of this page titled 'Support & Drivers'.

Tags: Notebooks

Similar Questions

  • TE2000 - screen turns on and off quickly

    Hi all

    My TE2000 was wrong flashing. The screen turns on and off quickly, sometimes every second quarter or so, it seems, so bad that I can hardly read the display. It's like someone is pressing the lid-switch very quickly.

    It happens sporadically. Sometimes it won't happen for a few minutes. Other times it flashes just once or twice, and still other times, it becomes unbearable and continues for minutes at a time.

    Someone has an idea of what could be the cause? I looked into the screens of replacement on e - bay and cannot find a lot...

    Hello

    Have you tried to check if this problem also appears on external monitor?
    Not? Try to do that! If it doesn't appear that on the screen TFT internal display then it s not a graphics chip malfunction but display or a failure of inverter FL.

    Looking for a second hand TFT screen?
    It seems that the laptop TE2000 supports a 14.1 "1024 x 768 TFT color screen
    Therefore, you can use each view of each laptop that supports the 14.1 screen size

    Good luck

  • Loading with interruptions, screen turns on and off

    I always put my phone in silent mode and plug it in before going to bed. I noticed it turns the screen several times during loading. I can't that assume this is caused by the brief on the charger, the screen always turns when the phone is connected.

    When the battery is almost full, it often becomes extreme the screen starts to turn on and off quickly. This morning, I took a screenshot of the use of the battery before disconnecting. It shows a decrease in the rate of load to 100%, indicating my phone set on another light show.

    I tried two different Chargers, (one came with the Z3C we speak, the other with my Xperia V) a magnetic cable and mini-usb ordinary and even three Sockets different. Problem persists.

    While I do not notice an impact on the performance of my farm, I'm afraid that it will destroy my battery finally. My phone is only six weeks old. Someone at - he seen this before? Any ideas to fix this?

    Hey guys,.

    I finally thought to it: it turns out that a clock plugged into another outlet in the same room was the cause of the problem.

    I hope that my battery was not too suffer from these sessions of loading bumpy.

  • After one minute of no activity my screen turns blue and I have to click back as a user. I want to prevent this.

    It started a couple of weeks and the only thing I can understand, is that it must have been associated with an auto update.  If I don't move my mouse or typing something in 60 seconds, my screen turns blue and I must click on the Daisy to the same user to reopen.  I want to prevent this.  I tried to use recovery and come back a couple of weeks, but it did not help.  Can someone tell me what is happening and how to prevent this?

    Thank you

    Hello

    I see you want to remove the logon screen on the resume.

    What operating system is installed on the computer?

    You can try the following and check:

    Method 1:

    You can change the screen saver and check:

    Steps to follow:

    a. open screen saver settings by clicking the Start button, then Control Panel. In the search box, type screen saver, and then click Change screen saver.

    b. in the screen saver list, click the screen saver you want to use and then click OK.

    Reference link:

    Change your screen saver

    http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

    Method 2:

    You can turn off the screen saver and check:

    Reference link:

    Enable or disable the screen saver

    http://Windows.Microsoft.com/en-us/Windows7/turn-your-screen-saver-on-or-off

    Method 3:

    Alternatively, you can try the following steps:

    a. go to the upper left corner of Control Panel - Power Options - need an alarm clock - value do not require a password - password
    Save the changes.

    b. right click on the desktop - Pesonalize - screensaver - uncheck on summary, logon screen.

    Do not post the State of the question.

    If you need help on Windows let us know.

  • Screen turns blue and restart Satellite C850D-11 q

    I bought a Satellite C850D-11 q runnings Windows 8 of Curry to the United Kingdom for my daughter just before Christmas - was a very good price £300 - however, she says that she will be surfing the internet and or do a variety of other tasks (no particular process does seem to be involved) and suddenly the screen turns blue and the computer will be closed and restart no reason apparent. He did at least 30 times per month.

    BSOD means that there is a hardware problem or software problem.
    The BSOD can be caused by high temperatures as well as problems of RAM.
    So it's not easy to say what is causing the BSOD.

    Make sure that this laptop is cooled properly.
    In addition, if the temperature is not the problem, try to recover the system using the recovery options described in the user manual and in the present document:

    + Windows 8 recovery & Repair +.
    http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  • 11 - e010nr after the signature on the photo and a few icons appear and then the screen turns white and reappears

    Laptop TouchSmart 11, e010nr 11, windows 8, no error message. I can Ctrl/alt/del and obtain the lock... the Task Manager screen. This screen works but nothing else

    Hi danny61,

    Just to clarify , when your screen turns white and reappears, the icons reappear also? and do you not see that set the desktop background or the taskbar? that it could be as simple as restarting the Explorer process in the Task Manager.

    If you can update me if I can see how I can help

  • I had the virus 'file system' I ran most of MS who removed it... then the screen turned gray and all the icons and files have disappeared... I can't use restore even in safe mode

    I had the virus 'file system' and ran the Microsoft Essentials who kidnapped... Then the screen turned grat and all my tyop desktop icons disappeared and my files... I tried to use the restore but it wouldn't return back or in SafeMode... also, I get a notice that the Task Manager is disabled? How can I turn back?

    Hi David McGeady.

    ·         You are able to open in safe mode Task Manager?

    Follow these methods.

    Method 1: Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    Method 2: It seems that the virus is still there. Performs a search using the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

    Method 3: Create a new user account.

    How to create and configure user accounts in Windows XP

    http://support.Microsoft.com/kb/279783

    If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

    How to copy data from a corrupted to a new profile in Windows XP user profile

    http://support.Microsoft.com/kb/811151

  • Screen turns black and does not return. One stop forced

    When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
    MMM

    Original title: hibernation problem?

    What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

    You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

  • Computer not start, screen black, I have to turn on and off several times (I have Vista)

    When I turn on the computer, you hear the sound that is running, but I get a black screen with a white underscore on the upper left. Click on keyboard and nothing happened. I must turn on and off several times and then I get the Windows Vista logo.

    If the 2 methods below do not work, you may have to reinstall Vista:

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • (Redirect) laptop screen turn green and setting turned off by its own

    Hell0... im using inspiron N4010... its been im 5 1/2 years using this laptop... all IM use sudenly screen turn green and its gt out of its own... thn I cudnt start 2 hours aftr a few hours its power on... and now it can be used as usual... I take abt serious prob of HRT? that due to the heat?

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Bev.

  • BlackBerry Smartphones retro lighting keyboard turn on and off by itself

    I got a new Verizon BBTour today, I had no problem to transfer my BlackBerry Storm 9530. I typed my first email tonight and found that the backlight of the keyboard is disabled while I was typing, I was about to get up to turn on the light of the House, then light keyboard turn around himself, then a few seconds later to stop again. He was turning on and off itself.

    Anyone have this problem? or does anyone know if there is a problem or that I need to set up somewhere? I checked the configuration on the screen/keyboard, this is exactly the same as the storm I. Help, please

    Joseph

    The backlight on the keyboard is automatic and the sensitivity does not always fire when you would like to.  But, if you are in low light and keyboard backlight does not instantly, place your hand on the keyboard and he rip off and the light.  If the sensor captures a bit of light, albeit indirect, it turns off the backlight.

    There is not currently of an option to change this behavior and it is battery.  It is not an irregular operation of the device.

  • ThinkPad T400 does not start, is turn on below the screen & turning HDD switch off in a loop

    I put my Thinkpad T400 hibernation, but the next morning I couldn't start. When I press the power button, the lights under the screen turn on and I hear the sound of the hard drive and get it out. I don't even see anything on the screen. It is only black. The process continues to repeat in a loop, except if I press the power button to turn off.

    I tried the static load, remove the thing.

    I also removed the hard drive, put it back again, but not working anymore.

    Help, please.

    Solved the problem myself.

    Removed the internal battery and reinstalled after 30 s.

    It worked perfectly. Typing of him now.

  • I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

    I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

    If you date something on it so that it remains not.

    I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

    Hey Roscoe,

    If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

    For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

    I hope this helps.

    Good luck!

  • Incessant turning on and off between machines?

    I use Production Premium 5.5 at work and now I need to work often at home. I understand that my license allows installation on two computers that I am the primary user of and the two computers cannot run the software at a time.

    That I need to turn off Production Premium and everything is modules each afternoon so I can use it at home and then turn on and off every night at home so I can use the next day at work? Or includes the software, via an internet connection, I guess, that the other licensed computer does not use the software at the moment which allows me to use it without the mess of constantly activation / deactivation twice a day?

    You do not have to disable the facility any circumstance other than wanting to install and activate it on another computer.

  • Need to disable acceleration hardware and smooth scrolling for users on a Remote Desktop Session.

    Hello
    I need to disable acceleration hardware and smooth scrolling for any user that connects to an RDS Server. I messed up the mozilla.cfg and created an autoconfig.js file. I guess I'm missing something along the way.

    This is currently my autoconfig.js
    Pref ("general.config.filename", "mozilla.cfg");
    Pref ("general.config.obscure_value", 1);
    Pref ("app.update.channel", "liberation");

    Mozilla.cfg
    Smooth Scrolling disabled
    lockpref ("general.smoothScroll.disabled", true);
    disables hardware acceleration
    lockPref ("layers.acceleration.disabled", true);
    lockPref ("gfx.direct2d.disabled", true);

    All that I'm missing? When I restart the two options are always checked in the options.

    Thank you!!

    Hi b1gt3x, you use a clear cfg file, you'll want to put this in your instead of autoconfig.js:

    pref("general.config.obscure_value", 0);
    pref("general.config.filename", "mozilla.cfg");
    

    In addition, you will have to make lockPref with a capital P in any case - that it reacts very sensitive to spelling errors...
    http://kb.mozillazine.org/Locking_preferences.

Maybe you are looking for