Hi, is it possible to use the function of touch screen on a HP tx2525 running Windows 7 Ultimate? THX

Similar Questions

• Is there a way to the target url by using the power of Attorney (I want to say is possible to use the proxy to target a site something like that.)?

  Is there a way to the target url by using the power of Attorney (I want to say is possible to use the proxy to target a site something like that.)?

  By default, you can not in Firefox.

  But you can use an add-on like FoxyProxy Standard, I think he understands the functionality you need.

• Using the function in Numbers ' 09

  I am trying to create a calendar in Numbers ' 09. My schedule has a number of steps that need to occur at specific intervals. For example, if the project starts at 09:00, the step 2a occur about 8 hours later. Step 3 should arrive 30 minutes after step 2. Stage 4 runs about 12 hours after step 3. Stage 5 runs about 4 hours after step 4. Is it possible to use the numbers to determine what time these steps should happen if I go to the time of departure?

  In Excel, I can use the TIME function. By example, if I enter 09:00 in cell A1, and then in cell A2, the formula = A1 + TIME (8,0,0), the result in cell A2 will be from 17:00. Then, I can enter in cell A3, the formula = A2 + TIME (0,30,0) and the result in cell A3 will be at 5:30. And so on.

  By the numbers, when I try to enter the same formula, I get the following error message: "the arguments of the formula may include a value date." Does this mean that many young people cannot do what I want to do here, or am I enter something wrong?

  Thanks in advance for your help.

  Sincerely,

  Mark

  Here are two ways (shown in the second column of formulas):

  

  Note that although the cells to appear in the column contains only times, they actually contain date and time strings and they are formatted to indicate the part time only.

  SG

• G8D94PA #ACJ: is it possible to change the function of the FN keys?

  Hello

  I sometimes use windows 7 32-bit due to my software dependency. in some software I have to use fn keys (F1 to F12) frequently with the combination of other keys. It is possible to enable the functionality of the fn keys as from now on if I have to use F5, so I use FN + F5 combination. So in this software I have to use F2 to F7 & I have to press CTRL + ALT + FN + F2 to F7.

  Please share any solution...

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  Is it possible to get the procedure to use feature stich photo?

  Will be Zoombrowser EX for windows 10 wotk?

  If any expert can guide me... that will be great.

  Hi Sat17,

  Thank you for your inquiry.

  For Windows 8 and beyond, ZoomBrowser EX has been replaced by EX. ImageBrowser

  Your software you will need to updated for Windows 10.

  You can access the software for your camera by clicking here.  Once on our site, scroll down to "Drivers and downloads", then use the drop down menu to choose "8.1 Windows" or "Windows 8.1 (x 64)".»  Your camera software has not been updated for Windows 10, but for Windows 8.1 software will run on your computer.

  To update your software, click the [Select] button to the right, then click on "How to download and install" for installation instructions.

• Is it possible to use the BB native SDK within a runtime android app?

  Is it possible to use the BlackBerry (not Android) native C/C++ functions within an Android app?

  Is it possible to communicate between a BlackBerry native sdk app and an Android app?

  Unfortunately not. We have integrated parts of the Android Runtime in the core OS (file Pickers, citing maps - compose, calendar of events etc.), but it happens without any code changes. If you are looking for features only found in the Cascades or native, it would be the way forward for all new development.

  See you soon,.

  Matt

• CAN´t, use the function "save PDF-portfolio under Web site" it is grayed out on the file menu -

  I can´t use the function "save PDF-portfolio as a site" in the file menu - it is greyed out.

  I use Windows 10 House and Acrobat DC

  Not all portfolios can be saved as a site.

  It is possible with http://blogs.adobe.com/pdfdevjunkie/wp-content/themes/Adobe_PDFDevJunkie/download/Billboar dTemplate.pdf

• Using the function PLSQL return Record Type Index of Tables in ADF

  I have a PLSQL function, a return type. My ultimate goal is to take this binary integer index Table and print it on the screen...

  CREATE OR REPLACE PACKAGE my_pkg IS
  TYPE t_col IS RECORD(
  i NUMBER,
  n VARCHAR2(30));
  TYPE t_nested_table IS TABLE OF t_col;
    FUNCTION return_table RETURN t_nested_table ;
END my_pkg;

  
  

  OPTION 1:
  

  1) has anyone got best practices to accept plsql RECORDS returned by a function?

  Here is an example.

  http://adfpractice-Fedor.blogspot.SG/2013/01/working-with-PLSQL-procedures-in-ADF-BC.html

  But it will be a lot of work... first of all accept the results in a loop... then store in a temporary storage can be a few VO or global temporary table and then display them on the page

  
  

  OPTION 2:

  Using the functions PIPLELINED and use in the select statement.  While I can use this select statement in the SQL query to create VO... and drag and drop the VO...

  CREATE OR REPLACE PACKAGE my_pkg IS
  TYPE t_col IS RECORD(
  i NUMBER,
  n VARCHAR2(30));
  TYPE t_nested_table IS TABLE OF t_col;
    FUNCTION return_table RETURN t_nested_table PIPELINED;
END my_pkg;

  
  

  select * from table(my_pkg.return_table);

  
  

  Wow... I'm so smart! .. really possible?  who is the best/possible/recommended option?

  I'm sure that will be the question most read by many who wants to use PLSQL instead of JAVA to the treatment and CHOSEN to use only to display the output of the PLSQL functions or procedures.

  
  

  Thank you

  Rahul
  

  
  

  Dario

  Do you mean the scope of the defined Type pkg will be finished?

  I created guy outside the pkg as 'Create Type' if it works in this case?

  Yes, level objects schema (created with "create or replace type...") can be used in java and this can work.

  I think that then the scope of this TYPE will remain until the user session passes.

  Object definitions is not worn, but have their bodies.

  So, if you instantiate the data level object type schema in a plsql function, scope of this object is this function.

  Of course, if you instantiate the object as a variable package, then life of this object is equal to the lifetime of the package (which usually equals life of session db).

  Dario

• Is it possible to use the record type or a PL/SQL table in the Select statement

  Hi all
  
  My requirement is that.
  I want to write a query and write a function, function, I want to return multiple columns at the same time in a Select statement.
  I select the return values in the Select no statement in a PL/SQL block.
  Is it possible to use the PL/SQL Table or Variable of Type record, or any other method in the statement Select?
  
  Please help me understand the solution.
  
  
  Kind regards

  830960 wrote:
  do we like it?

  In general, Yes, if the function is a function table, you can do something like:

  select  t.col1,
          t.col2,
          f.col1,
          f.col2,
          f.col3
    from  table_name t,
             table(some_table_function(param1,...paramN)) f
  /
  

  SY.

• Is it possible to use the CONTRAST DETECTION as a method of applying mask/Matte?

  This could be one of these more stupid questions, but I would still put forward and I hope that I can get answers that can satisfy my curiosity.

  
  

  I came across this issue when I thought about how I can color-grade the subject independently without defining a range of color like the color of the skin, or peel the subject on the bottom and add something between the two without scope of roto. Then I thought of autofocus and it is possible to reverse the process of update automatic and really separate the proportions of the image are under discussion and which are out of focus. Usually I shoot with a narrow depth of field, and I think the BG would get a little blurry. So, it is possible to extract the areas of focus of the out-of-focus areas?

  
  

  So the process of detection of contrast or edge detection (or to phase detection) detection during an irreversible autofocus?

  Or require dynamic variations (to get different samples) to compare and evaluate values?

  Or is it limited process to perform in only a small area rather than an entire image and would take too much if applied to a large area processing power?

  Or is it just that all this is not mathematically this practice?

  
  

  Many thanks to those who could answer this question!

  
  

  Wish you a pleasant and creative day ~
  

  
  

  
  

  It is possible to use the channel information to extract a mast. This information comes from the color and luminance values. It's what we call a procedure cache. Usually you duplicate your layer of film and start applying color effects to isolate certain areas of color and luminance, and then you use this sequence as a cache of luminance to the layer below.

  Having said that, although it is fairly easy to find details of contours (actually find contours) it is extremely difficult to know which of these edges must be outside the desired area of masking. Trying to deconstruct the automatic update function, that a camera uses the image data would be quite a daunting task, and I don't know how effective is, it would be because there is currently no metadata binding to any part of the frame to something as the face of the person you want to use as a mask. Face detection algorithms can have a chance to do this for the faces, but other parts of the body would be extremely difficult to understand.

  Stereo may offer a solution to extract a procedure cache on the part of your shot which is development that took you great care, setting up correct convergence for couples of images, but it would not isolate skin tones.

  Rotobrush is an automated tool that requires user input to set inside the desired mask that uses the values of color and edge detection. It is very effective if you take care with photography original, but if you're not careful automatic roto using any tool becomes difficult if not impossible. Afterwards, the Visual effects are much more complicated if there is no production planning.

  Colorista II is my favorite tool for this kind of color correction. It is a very effective tool of internal mast that can do amazing things using the color range. Other color Correctors (Davinci, for example) have other tools to isolate areas based on the color and luminance values. Your idea is interesting, but it would be very difficult to remove using current tools EI.

• Is it possible to use the getObjectsUnderPoint of a DisplayObject that is not added to the display list?

  My situation:

  I have a DisplayObject (objA) added to the display list and a DisplayObjectContainer (objB) not added to the display list. When objA receives a MouseEvent.CLICK event, is it possible to use the localX and localY to the event of objA to get objects under the same point in objB?

  Sample:

  var objA:Sprite = new Sprite();

  objA.graphics.beginFill (0);

  objA.graphics.drawRect (0, 0, 100, 100);

  objA.graphics.endFill ();

  addChild (objA);

  var objB:Sprite = new Sprite();

  var childA:TextField = new TextField();

  childA.text = "This is the child.";

  objB.addChild (childA);

  objA.addEventListener (MouseEvent.CLICK, handlerClick);

  function handlerClick(e:MouseEvent):void {}

  var pt:Point = new Point (e.localX, e.localY);

  var objs:Array = objB.getObjectsUnderPoint (pt);

  trace (objs. Length);

  }

  so your test/trace environment can deliver it.

  Use the following code, publish your swf file and test the swf file in your standalone player (or publish a html and swf and test it in your browser).

  package {}

  import flash.display.Sprite;

  import flash.events.MouseEvent;

  to import flash.geom.Point;

  import flash.text.TextField;

  SerializableAttribute public class extends Sprite {Main2

  private var _objA:Sprite = new Sprite();

  private var _objB:Sprite = new Sprite();

  private var childA:TextField

  public void Main2() {}

  _objA.name = "a";

  _objA.Graphics.beginFill (0xdddddd);

  _objA.Graphics.drawRect (0, 0, 100, 100);

  _objA.Graphics.endFill ();

  addChild (_objA);

  _objB.name = 'B ';.

  _objB.Graphics.beginFill (0xdd0000);

  _objB.Graphics.drawRect (0, 0, 100, 100);

  _objB.Graphics.endFill ();

  _objA.addEventListener (MouseEvent.CLICK, handlerClick);

  Stéphane = new TextField();

  childA.name = 'tf ';

  _objA.addChild (childA);

  childA.multiline = true;

  }

  private void handlerClick(e:MouseEvent):void {}

  var pt:Point = new Point (e.localX, e.localY);

  var objs:Array = _objB.getObjectsUnderPoint (pt);

  childA.text = "";

  for (var i: int = 0; i

  childA.appendText(objs[i].name+"\n");

  }

  }

  }

  }

• Is it Possible to use a function when you create a table?

  Hello

  Is it possible to use a function during the construction of a table?

  I would like to browse my data returned from the db and call a function. The part where I call the function "myFunction [i]" doesn't seem to work. How can I solve this problem? I need to put the function call results in the table.

  var i: uint;

  for (i = 0; i < dataArray.Length; i ++)

  {

  dgArray = [{name: dataArray [i] .name, Type: myFunction [i]}];

  }

  Thank you!
  -Laxmidi

  Hi laxmi,

  Yes of course it is quite possible to use a function when you create a table... In your code, you made some mistakes...

  You used hooks to call the function myFunction [i]... where you are supposed to use parentheses... myFunc (i)... and other you must push the object in the dgArray but yous hould not not attribute...

  dgArray = [{name: dataArray [i] .name, Type: myFunction [i]}]; This will result in only the last table iterates in dgArray...

  So you should write dgArray.push ({name: dataArray [i] .name, Type: (i) myFunction});

  Check out the code below...

  
  http://www.Adobe.com/2006/mxml"layout ="absolute"creationComplete ="init (); » >
  
    private var dgArray:Array = new Array();
  private var myDataArray:Array = [{data: '1', name: 'Robert'}, {data: '2', name: 'Nicolas'}, {data: '3', name: "Bika"}]
   
  private function init (): void
  {
  for (var i: int = 0; i
  {
  dgArray.push ({name: dataArray [i] .name, Type: (i) myFunction});
  }
  }
    
  private void myFunction(i:int):String
  {
  Return 'Type' + i;
  }
  ]]>
  
  

  If this post answers your question or assistance, please mark it as such.

  Thank you

  Jean Claude Chari

• Create the view and by using the function that returns a type oracle

  Following is possible?
  
  A function returns an ORACLE object Type, and I want to use this feature, in my opinion, it is possible to access each field of the type once the function is executed and make a column in the view?
  

  create or replace TYPE SOME_INFO AS OBJECT
  ( 
    CHARGE FLOAT,
    SOME_DATE DATE,
    SOME_VAL VARCHAR(50)
  );
  
  CREATE OR REPLACE
    FUNCTION CALCULATE_INFO
      (
        p_chargeId NUMBER)
      RETURN SOME_INFO 
    AS 
    v_some_info SOME_INFO := new SOME_INFO(0, null, null);
  BEGIN
   
  -- function body populates the v_some_info
  return v_some_info;
   
  END calculate_info;

  Now, I want to use the function according to me - if the underlying query of the view follows-
  

   select c.*, calculate_info(c.charge_id) as someInfo from some_charge;

  How to recover someInfo.CHARGE, someInfo.some_date, someInfo.some_val? I can put them as columns in the view?
  
  If you use only functions that return a single value in a view?
  
  Thank you
  Mustapha
  
  Published by: Tina Giri on April 16, 2009 05:47

  How to recover someInfo.CHARGE, someInfo.some_date, someInfo.some_val?

  SQL>  create or replace type some_info
  as
     object (charge float, some_date date, some_val varchar (50));
  /
  Type created.
  
  SQL>  create or replace function calculate_info (p_chargeid number)
     return some_info
  as
     v_some_info   some_info := new some_info (0, null, null);
  begin
     -- function body populates the v_some_info
     return v_some_info;
  end calculate_info;
  /
  Function created.
  
  SQL>  select your_view.someinfo.charge,
         your_view.someinfo.some_date,
         your_view.someinfo.some_val
    from (select c.*, calculate_info (c.empno) as someinfo
            from emp c) your_view where rownum <= 3
  
  SOMEINFO.CHARGE SOMEINFO SOMEINFO.SOME_VAL
  --------------- -------- --------------------------------------------------
                0
                0
                0                                                            
  
  3 rows selected.
  

• I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  Hi John 2078 Tito.

  I understand that you have updated your iMac and Apple Watch and now you're curious about unlock your iMac using your Apple Watch. I know that it is a nice feature to be able to quickly and safely unlock your computer, so I'm happy to help you.

  This feature is available on 2013 iMacs and later versions, which means that your iMac won't be compatible. You can see more info on this feature here:
  Unlock your Mac with Apple Watch - Apple Watch user's Guide

  Thank you for using communities Support from Apple. See you soon!

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing