Hi, ive got a m8 htc on 3 network, now im not very familiar with ffox but my phone would benefit from using it

Similar Questions

• My basic desktop on vista turned at 45 degrees so ive got put my laptop as a book to read and my mouse seems to go backwards

  My office on my vista basic screen turned at 45 degrees so ive got put my laptop to read and the mouse pad seems to be going backward. can help u to make it back to normal

  Hi Billydryden,

  1. What is the serial number and model of your graphics card?

  This can happen due to changes in the settings of the graphics card. You can try the following steps and check.

  a. Click Start, go to control panel and select the graphics card utility.

  or right-click on Deskotp and select chart properties.

  b. in display settings to make changes in the Rotation option that you want and check.

  Hope this information is useful.

• Ive got photoshop CS6 in my computer, but when I tried to open it, it opened as Photoshop CS6 extended and asks me if I want the license for this software so that I can access is more than Photoshop. Can anyone help at all?

  I have been using Photoshop CS6 and all of a sudden when I try to open the images with this it takes me to a page saying Photoshop CS6 Extedned and asks me to put this software under license. Ive already got Photoshop so why this phenomenon happens? I now can not access?

  You should see a prompt to "this software license. You can see on the screen of the trial.

  Click on that, you identify if requested, and then click the option "I have a serial number" or you may be able to do so directly.

  After you have entered your serial number, your software is licensed and active.

• Ive got windows software cs5 but now have a mac. I can't afford new software, do I have any options

  Ive got windows software cs5 but now have a mac. I can't afford new software, do I have any options?

  Changes in the shelf are supported only for new versions of applications.  If you still have your Windows machine don't give up to use it.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

  I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

  You can create word documents and powerpoint presentations, but you cannot save them directly on a normal USB.

  Microsoft made a version of office for iPad, you can find it in the App Store. Here is a link:

  Word

  https://iTunes.Apple.com/en/app/Microsoft-Word/id586447913?Mt=8

  PowerPoint

  https://iTunes.Apple.com/us/app/Microsoft-PowerPoint/id586449534?Mt=8

  There are usb drives that work with iPads, and you can save documents to those who use their own applications.

  http://9to5Mac.com/2015/03/20/the-best-iPhoneiPad-USB-flash-drives-with-Lightnin g-connectors.

  Also I suggest you read through the iPad User Guide:

  http://help.Apple.com/iPad/9/

• I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400

  I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400 how can I hook up t he old external hard drives?

  You need a FireWire 400 adapter FireWire 800 and one FireWire 800 adapter Thunderbolt.

  (141473)

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• Make a backup of ASR, saved, but at the end of the record, I got this message: discovery of the ASR diskette has not been created.

  at the end of the recording, I got this message: discovery of the ASR diskette has not been created. You will not be able to restore an ASR backup without the system information stored on this disk. What does that mean? Should I save my data otherwise? I don't have a floppy drive (I'm surprised if someone does) but I have a dvd read/write cd drive... One last thing. When I looked at the content on the flash drive with program de-Frag it was lit, which means completely fragmented, the program recommended it de-fragment it... is this safe with a file of this size on a flash drive?

  Original title: Saving went well, but

  Windows XP is too old to do something other than a floppy drive.  If the automated system recovery disk is important to your backup and restore needs (HINT: YES it IS!) then get a USB floppy drive to create the ASR disk.  Or get a copy of most modern backup and restore program that works under XP and use modern media (USB, CD/DVD, keys etc.) to create a startup/recovery media.

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• How can I reinstall Windows XP? I don't have my OEM of Windows ME records. I don't have my Windows XP to upgrade the disks I got the OEM. It was a free upgrade to Windows XP with my purchase of the computer with Windows Millennium Edition.

  How can I reinstall Windows XP?  I don't have my OEM of Windows ME records.  I don't have my Windows XP to upgrade the disks I got the OEM.  It was a free upgrade to Windows XP with my purchase of the computer with Windows Millennium Edition.

  I'm sorry, but you will need a Windows 9 x / ME drive to provide during the XP installation from the XP disc is a version upgrade. There is no way around that. See if you can find a friend with an older operating system disk (not a recovery disk) to support qualification. Otherwise, you would need to buy the full version (not upgrade) of XP to install on the computer. MS - MVP - Elephant Boy computers - don't panic!

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images

  Hello

  I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images (ie the rotating EGTC)

  Now, I see the image preview and it disappears to the flower, so I did not see one of my photos

  Some would like TO help on this im so not good with this kind of thing.

  Appreciate it in advance

  Let

  Hello

  • When you change the format of images of?
  • What is Windows Explorer or Itunes?

  Try the TV activation

  Enabled and disable the Option 'show window previews (thumbnails) '.

  a. right click on the taskbar.

  b. Select Properties.

  c. check show window previews (thumbnails) "Option. .