Hi, my dvd player does not show on my computer and Device Manager. can someone help me?

Hi, my dvd player does not show on my computer and Device Manager. can someone help me? HP dv6700z laptop.

# It is now showing there either. Thank you.

Tags: Notebooks

Similar Questions

  • Installed XP Pro SP3... Now my dvd player does not Sleep in my computer and does not appear to exist? I have no filters in regedit, it isn't a problem of drive letter, model acts as reader's not here yet. No driver for it, as this is the firmware

    DVD/cd burner no longer works. Instlled SP3, no computer behaves as it is not yet connected.  No reader, its firmware.  No filter I know cuttin git.  Not a problem of drive letter, carries the reader will not be open yet.

    Hello Justuslonginus,

    Thank you for your message.  What is the brand of your computer?  It could be that your computer manufacturer has a required update before installing SP3.  You should check with them before moving to the next steps.  After checking with you computer manufacturer, try to run the new hardware wizard to scan.  The instructions are below:
    Click "Start" > click on "Control Panel" > double-click "Add Hardware".
    Answer that the device is already connected and allow the system to scan.
    If your system has not yet found your drive.  Then we can remove SP3 to see if it was the culprit.  Click HERE for instructions to remove the SP3.
    Please let us know if it did or did not help to resolve this problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Im having trouble replying to ads from craigslist. My computer says it does not recognize yahoo as my server... can someone help please?

    Somehow it is said than his back sending emails because it does not recognize the server, I use Verizon wireless as an internet connection and Im not sure how change this and its driving me Ben Ali...! Help, please...

    You need a default mail client to meet with Craigslist. Yahoo's Webmail, but there is a solution to make it by default.

    How can I make Yahoo! Mail my default email application?
    http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html

  • Need to reinstall windows xp on my computer, however I can't work on the code of the product. It does not show as in the little booklet! Can you help me?

    Only a sticker at the back of the cd with a box number.  Can't work out which is the product key - do not remember really.  I hope you can help

    The product key is the one formed with 25 characters that looks like XXXXX-XXXXX-XXXXX-XXXXX-XXXXX. If you can't see this character string, then you can contact Microsoft Support to obtain a product key replacement that they can generate one using the part number in your installation disc. The number is 800-936-5700. Their opening hours are from Monday to Friday from 05:00 - 21:00 and Saturday-Sunday 06:00 - 15:00 Pacific time.

  • Driver DVD disappear from 'My computer' and 'Device Manager '.

    Vista HP Portable DVD player continues to disappear from 'My computer' and 'Device Manager '. Already tried Upper/LowerFilters.

    Hi, a few weeks ago, the DVD burner in the laptop suddenly disappearedmy computer (Windows Explorer).  The first thing I did was check theDevice Manager to see if the drive was there.  It was not the case.  Restarting the laptop did nothing.  Repeated several times, active Vista updates.  No change.  By checking the net, I tried to delete the Upper/LowerFilters in the registry, download it tool Microsoft fix , delete iTunes, do a system restore, to change all the parameters of thesleep and hibernation off and a few other things.  It appeared for the first time after that:

    1. Do a restore of the system for the first restore point.
    2. Remove the DVD writer.
    3. Restarting the laptop.
    4. Research of new hardware in Device Manager .
    5. Change all parameters of standby and Hibernate off. (I tried this method without this step first, but the drive disappeared after the computer went to sleep and woke up.)  Tried 3 times with the same results).
    6. Closing.
    7. Reinsert the DVD burner.

    On the next reboot, the DVD writer has been recognized and ended up in my computer and Device Manager .  No errors of any kind and no drivers were installed at startup.

    What has happened since then, in the last 4 or 5 days, is randomly disappears from thedesktop .  Usually after a few hours or more.  This time, however, it usually appears inDevice Manager after a search of new material.  No reboot required.  It will read from a DVD .avi files each time.  It has not been detected byDevice Manager maybe about 2 or 3 times, and after a simple reboot, it will be present inmy computer and Device Manager automatically after a reboot.  I read that the superior/UpperFilter mark has worked for many people, but for some, the problem returns.  In addition, many of the discussions on this question and proofreading are years.  It happened about 10 days ago.  Within 2 days before the problem appeared first, it was an update of windows, but also an update of iTunes.

    I noticed that I received this error when opening iTunes:

    "The registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. Please reinstall iTunes. ''

    I have not reinstalled, no DVD player.  Uninstalled itunes again.  Since I finally got the drive to appear (using the method I described above), I did bother to reinstall iTunes because I particularly need it on this computer, worried that it may be the cause of the original problem and I wanted to see if the disc disappears again.  I did do it, however, let QuickTime installed.  Don't know if this could be a problem?

    I stumbled upon this suggestion, but I also had the same question as the next post, and I have not seen a response.  I don't know if or how I should try:

    Nikki,

    You can not go back if the restore points aren't there. Try to reinstall the IDE driver.

    To do:
    -Click on the round to start and right click on computer
    -Left click on properties, this will open the system window
    -Click on device high Managerin left
    -Click on continue if prompted by UAC
    -Goto the 'IDE ATA/ATAPI controllers' you should right click on uninstall and restart

    BTW that dog rox in this avitar

    See you soon! MCP. MCDST. LVL 80

    Hi, thanks for the comment on my puppy. She is now 5 MB and her name is Nikki, lol.

    Well, I tried what you said, but the IDE ATA/ATAP controllers has a (+), so when I select it does give me not an option to uninstall. It is for me (analysis of the physical changes (or) properties).       and if I click on the (+) sign I have 4 different options. 2 channels IDE, Intel (R) 82801 HEM / HBM SATA AHCI controller and Intel(r) ICH8M Ultra ATA Storage controllers - 2850.

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e3701d75-9dbe-4ae9-9d70-83f14129247c?Prof=required

    What I see in "Device Manager", under IDE ATA/ATAP controllers is:

    IDE channel (x 4)

    Ricoh Memory Stick Controller

    Ricoh SD/MMC Host Controller

    Ricoh xD-Picture Card Controller

    Controller of PCI standard IDE dual channel (x 2)

    The laptop is about 2 years and never had problems.  The DVD burner is hardly used to burn, maybe a total of 5 disks in this time.  It has been used occasionally to read or copy from, but not much.  I'm not convinced that he is dead, as I had 2 die on me in desktop computers, after burning hundreds of CDs in them and read much.

    in any case, I was not able to find any bugs or suggestions (with the exception of 'replace' the reader), so I just wanted to describe my specific situation and see if anyone could help out.  Forgive me for information, I have left out, but I am an amateur when it comes to the problems with the computer and still don't know what mean things or where I can get information on my OS, software or hardware.  All anyone can do would be greatly appreciated.

    This is the information I have:

    HP Pavilion dv6700 Notebook PC

    Optiarc DVD RW AD-7560 ATA Device

    Vista Home Premium

    Service Pack 2

    Thanks again for any help.

    Hello
     
    1. do you have the software installed on the computer of CD/DVD burning?
     
    Check if the CD/DVD drive is recognized in the BIOS (Basic Input/Output System).
    Step 1: We also recommend to uninstall the CD/DVD burning software, if you have everything installed, restart the computer and check the result.
    Scan for the device in Device Manager. To do this, try the following steps.
    1. click on start, type devmgmt.msc and press to enter.
    2. click on one of the items in the list, click the Action menu and click Scan for hardware changes.
    3. check if the CD/DVD is displayed.

    For more assistance on this, contact the manufacturer of the laptop.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
  • On Qosmio G20 DVD player does not work

    On my laptop dvd player does not work perfectly.
    I can watch DVDs and CDs, but I can't burn CDs or DVDs at all.

    This laptop is a former view model and think that when I bought the store I bought it since deleted most of the information

    Help, please

    Thank you

    Hello

    There are two possible reasons why you are not able to copy anything to the CD or DVD.

    First, it may be possible that the drives used are not entirely compatible.
    In such cases, it s always advisable to test different CD and DVD from different manufacturers.

    Secondly, the issue could be related to a defective laser lens; in many cases, this can happen because of a physical constraint. If the laser lens can not calibrate in a good position, then the player will not be able to handle the inserted discs.
    This could be the worst case, because this issue is not repairable. Just a STRANGE replacement could help.

  • dvd player does not

    My HP pavilion 14-n014nr dvd player does not work.  Tried a driver fix earlier and it still does not. Any help on this would be greatly appreciated. The sooner, the better.

    This is the 64-bit version of Windows 8.1 if it matters.

    Hello

    In this case, runs through the procedure in respect of the resolution subtopic - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that fixes the problem.

    http://support.Microsoft.com/kb/982116

    Kind regards

    DP - K

  • Tecra M5: DVD player does not read these mini DVD

    I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.

    Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.

    All the other standard size DVD, CD works good about it. Its complex and as well as irritating.

    Any suggestions?
    Why his messedup?

    Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
    Try the sascha. Maybe you are a lucky man, and it works.
    If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
    Then stops again, put the drive in the notebook and the startup of the device.
    The laptop should recognize the drive and must indicate the firmware again.

    I don't know if this will help but it s attemptable m

  • My DVD player does not open when I click on the button

    Hello

    I hope someone can help me.
    My DVD player does not open when I click on the button.

    I tried clicking on eject on the DVD drive icon in my computer and it comes up with an error message.
    I think I deleted the cookies the other day. Who would have something to do with the problem?

    Any help would be greatly appreciated that I really don't want to send my phone to a technician.

    Hello

    Try to manually open the CD/DVD drive.
    Near the eject button, you will find a small hole.

    You can use a small object like staple and could push gently into this hole.

    Usually, this should help to open the drive manually.

  • Mat * one years (uj-840) DVD player does not work properly

    The Mat * one years (uj-840) DVD player does not work properly.
    A symptom of the problem is that the icon does not appear in 'my computer '.
    more and she does not recognize the CD.

    I went to the properties of the drive through Device Manager and saw the following message is displayed:

    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Click Troubleshoot to start the troubleshooter for this device. »

    Following the instruction of the troubleshooter, I tried to update my driver through
    Device Manager, but it tells me that the current driver is the more up-to-date version.
    In the properties of the drive, I found that my driver version is: 5.1.2535.0

    What is a simple problem that has a solution?
    I don't see other actions to find the root of the problem.

    Thank you

    I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
    Check it out!

  • Tecra M4 - DVD player does not recognize discs in Vista

    Hello

    After the installation of Vista my dvd player does not recognize discs!
    No update XP! It was a clean install of Vista.

    I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

    I tried the XP disk it works fine and recognizes all.
    Drivers are installed correctly no problem in Device Manager is invited.

    So I have no idea how to run it, seems to be a Vista problem

    Could someone help me? I am really frustrated to this topic

    Thanks for your help

    Maybe this helps:

    -Remove the drive from Device Manager CD/DVD.
    -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    -Reboot the laptop

    But what happens exactly? Which disks are not recognized?

  • DVD player does not accept disks

    My '' integrated '' DVD player does not read the disc (DVD, BluRay, any region code), but it ejects after a small delay of about 1 to 2 minutes.  Is there a diagnostic software to find the problem?

    Your Super Drive never read blu ray and probably did not. Try a cleaning disc. Try resetting the memory NVRAM How to reset NVRAM on your Mac - Apple Support and SMC reset management system (SCM) controller on your Mac - Apple Support

    Finally buy and inexpensive external optical drive, but not apples Super USB drive because it does not work with your Mac.

  • Satellite P25-S520 - DVD player does not work properly

    Difficulty of DVD player or buy the external drive

    My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

    I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

    An attempt to update the driver has also fails.

    I was able to copy a CD of music last night so that at least works properly.

    Does anyone know how can I fix? The important part is to be able to load my new program.

    Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

    Thanks for any help,
    Humbaba3000BC

    Satellite P25-S520
    PIONEER DVD - RW DVR-K12D
    Driver provider: Microsoft
    Driver date: 01/07/2001
    Driver version: 5.1.2535.0
    Digital signer: Microsoft Windows Publisher

    Any external USB CD/DVD drive will be compatible with your laptop.

    However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

    So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

  • Satellite A100-447 - DVD player does not read some discs

    Hello

    I have a 4 month old Satellite 100-447 (PSAAN), came preloaded with Vista Home Premium and a carpet * CD/DVD super-multi UJ-850 s player.

    The DVD player does not work properly. It will recognize a few blank, but never DVD-R DVD and won't recognise any DVD at all serious. He is very good with CD and DVD movie discs. It's just recordable DVD where there is a problem.

    Also when you try to write to a DVD, when he chooses to recognize a TI-error in half way through.

    What can I do?

    Thanks for your help.
    Adam

    Hello

    You can do the follwowing:

    Go to this website http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp,

    Download the latest update of the firmware for this drive, install it, and then try again.

    Sometimes, the manufacturer must update their readers for the newer recordable media and so I think that it is possible that your drive is simply not up to date.

    Welcome them

  • Recovery USB - stick (DVD player does not) Acer Aspire 7750 G

    Hello world

    My DVD player does not work for quit some time. This is no big problem for me, because one barely use it.

    Unfortunately, it is not possible to burn recovery DVD. In my view, it has an option to do a recovery USB drive. It would be a great solution! Unfortunately I do not have the possibility to do so. Is this only possible for computers without an optical drive? Is it possible to download the program with the option to use a USB - stick as in the YouTube video?

    YouTube instructionvideo

    Thanks in advance,

    Richard

    You can try to work around the problem, since I'm not sure that Acer was already an eRecovery on windows version 7 which allows to create USB recovery media.

    This free software allows you to create a virtual DVD/rw drive and use it to create an iso file, then you can ise this iso file to create a USB stick recovery using rufus:
    of http://www.techsupportalert.com/content/TotalMounter-Free-Virtual-CDDVD-Burner-that-facile-use.htm

    http://Rufus.AKEO.IE/

Maybe you are looking for