Hi my hp vista shortcuts stopped working after uninstaling google crome and google earth

Similar Questions

• Why the screensaver stop working after a few minutes and then go to the black screen permanently?

  I use Vista Home Premium with Explorer 8. My screensaver always works for about 5 minutes and then stops and goes to a black screen. Still black screen and my screen saver active ever again until I have move my cursor to display the page I was on. The screen saver does not available parameters except to set the number of minutes, I want to start. I ran antivirus, anti-spyware-malware etc the gamet, but anything is wrong with the screen saver. I am blocked and never had this problem before. Anyone know what is happening, what is the cause and how to fix this?

  If you changed your diet plan or changed some settings for your course, it can happen.

  (1) go in the bottom right of your screen and click on the battery icon and click more power options (assuming that you have a laptop. If you don't go to the control panel (Classic view) and go into power options)

  (2) on your package (indicated by a blue dot next to it), click on change plan settings and navigate screen however turn it off for a long time, you want it to be before he turns off the screen.

  I do not recommend messing around with drivers, because when I did, it messed up my screen and ended up back where I was before she has nothing (sorry James). of couse I messed up a little and the only real problem was the catylist control center has disappeared, and when I tried to fix this, I came across problems (it looked like a safe mode without the mode without failure of words on the corners)

• Asus Vivo tab RT hardware keyboard stopped working after the default reset and updates.

  Separated from this thread.

  My Asus Vivo tab RT after the default reset and updates my physical keyboard has stopped working.

  but I can use the mouse by using the touchpad the touchpad works a few keys on the keyboard as...

  music, fn, FN + brightness work. but the letter keys are not. When I am pressing on the keys, they make sounds, but does not...!

  Hi Srikanth,

  I understand that you can not use the alphabetic keys on your tablet.

  To better understand the issue, please send us the following information:

  1. You are able to use the external keyboard with the laptop?

  2. Is this problem specific to certain keys or all alphabetic keys have similar problem?

  This problem could occur if the filter key is enabled, please disable filter keys and see if the problem is fix.

  Follow these steps to disable the filter key

  1. Press the Windows key + R.
  2. Type of control
  3. Click ease of access.
  4. Click on change your keyboard works.
  5. Uncheck the box that says Activate FilterKeys.
  6. Click Ok.

  You can also see the following article for some common troubleshooting steps that can be performed on Windows 8.

  http://www.Microsoft.com/hardware/en-IE/help/Windows-8/troubleshooting/keyboard/using-keys

  Hope this helps, get back to us if you need further assistance for Windows.

• HP SimplePass stopped working after update Google Chrome 42

  I have HP SimplePass installed 6.0.100.276 and site Web Logon 6.0.100 active in Chrome, but since the update to the Chrome Version 42.0.2311.90 the extension of the logon Web site does not ask me finger drag. The extension icon appears next to the address bar, but it does not work. Does anyone have a solution for this? Thank you.

  This is because Google has disabled the default NPAPI in Chrome 42. You can get SimplePass works again by the reactivation of the NPAPI - go to chrome://flags (type in the URL bar), scroll to the entry 'Activate NPAPI' and click the 'enable '. Restart of the Chrome and SimplePass invites you once again.

  Bad news is that Google will permanently remove for NPAPI in September so unless SimplePass is updated to use native PPAPI of chromium (which is probably unlikely since the formidable support for SimplePass Authentec is killed) he dies correctly.

• Microsoft Wireless nouse model 1050 on 32 bit vist has stopped working how to fix it and if I uninstall how can I reinstall

  wireless mouse market works but shuts down for no apparent reson, I'm not good with computers and need a simple fix

  Hi Sandra,.

  You can try to install the latest version of the drivers for the mouse and check.

  For more information, you can consult the following article:

  Troubleshoot the failure to find new mouse connected to your USB port

• my computer vista laptop stops working

  my computer vista laptop stops working. It starts ok and allowes me to choose my user account, then it loads to the top of my page with all the desktop icons and wellcome page, then it stops working. How to solve this problem? Thank you!

  LTCRay,

  If the problem persists in Mode without fail, it is very likely that the system has been infected.
  You can take a look at the post of PA Bear on the removal of the malware on this thread:
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275
  Remember that you may need to removed the hard drive from the system to scan for infections.
  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• ScrollBar NB100 touchpad stops working after exit full-screen mode youtube

  I have some Toshiba laptops, satellite and now netbook100.

  All share a problem, the touchpad scroll bar:
  It stops working after you exit the full screen in youtube.
  Here's how to reproduce the incident:

  1. with the help of any mainstream browser, start playing a video on youtube, click on the button at the bottom right of the video full screen.
  2. click on [the cross] to exit full-screen. (next to button full screen.)
  3. check if you bar scroll that still work.
  4. a reboot will restore function.

  Currently I m on vista, I think that you will have the same problem under XP.
  The search in google (scroll touchpad bar stops full screen youtube) return more people will share the same question but no answer.

  Environments: win xp all, win vista all.
  All decks, Windows Update driver, updated touchpad driver.

  This is not a major technical problem, but for a netbook, it's very annoying.
  If anyone has this problem or answers, please share it here.

  Thank you in advance.
  Kind regards.

  To be honest, it's the first time I read on this issue.
  I m not a NB100 owner but I have a laptop and I m using IE as your browser and Windows XP.
  I checked this and my touchpad is not working correctly!

  I m wondering if this behavior would appear only the website youtube?  :|

• Satellite A100 - 049 (PSAAR) - registration of Windows Vista has stopped working

  My Toshiba Satellite A100-049 (PSAAR) came loaded with Windows Vista Home Premium.
  On each occasion my computer boot the, "record of Vista has stopped working" message.
  Here are the details of the error message below.
  Anyone have a similar problem or have a solution to this problem?

  Problem event name: CLR20R3
  Problem Sig 01: Toshibaregistration.exe
  Problem Sig02: 023.0.2538.28272
  Problem Sig03: 45801f61
  Problem Sig04: System.Managment
  Problem Sig05: 2.0.0.0
  Problem Sig06: 4536f344
  Problem Sig07: 111
  Problem Sig08: 123
  Sig09 problem: access to the authorization system
  OS Version:6.0.6000.2.0.0.768.3
  Local ID: 6153

  This happens especially if someone install a clean Version of Vista.

  Please call Microsoft. You must activate Vista by phone.
  As far as I know the phone call is free. After that it all works again.

• Error message: check of Vista has stopped working

  ARG.
  After that a few days of use, I get this error:
  Registration of Vista has stopped working.

  This happens every time I restart the computer.
  I tried to look around a gace, but I can not even find anything on the subject.

  Anyone who has got any ideas?

  Great info. Thank you for this

• Predator G3120 stops working after one hour (exactly)

  Acer Predator G3120

  Windows 7 (64-bit)

  State of origin

  Stops working after one hour (very reproducible)

  Hello peoples,

  For more than two years now, I have an Acer Predator G3120 and I experienced a lot of pleasure from it. Three months or so, however, I can't keep the pc for more than an hour later. If I have all the programs running at the time where he spent an hour limit, my pc crashes and gives me a BSOD (mainly stopcode 0x000000f4). If I don't have any programs running, it will be impossible to open all my desktop shortcuts, and if I try to go to 'My Computer', explorer.exe stops working. ALT + ctrl + del will result in a black screen. I'm quite a greenie when it comes to things like these, but I am I supposed to do something with my SSD.

  Download the latest drivers did not work, however. Also, I'm sure that this doesn't have to do with malware, as I couldn't detect any with different scanners, and I put my pc back to factory settings (which makes it quite certain, that he doesn't have to do with any installed programs).

  At this point, I'm running out of options, and so any help would be most welcome.

  Thank you for reading,

  Skumawiki

  Once connected to your system, your position SSD is not serious.

  Try this:

  http://www.crucial.com/wcsstore/CrucialSAS/firmware/M4/070H/1-0-0-90-crucial-070h-07-00-SSD-firmware...

• Internet Explorer 9 stopped working after an uninstall of HP Support Center

  Internet Explorer 9 stopped working after an uninstall of HP support center and drivers for all-in-one printers from HP (psc1310, C4180, F4200) 3.  Intend to re - install for just C4180.  I chose option to remove any related software, even if the update HP and Photosmart Essentials were left.  IE9 will stop working at the launch (even if launched with no Add - ons and disabled protected and restored advanced settings Mode) and regardless of the initial URL.  If I remove the update of IE8 IE9 works very well.   I tried to reinstall IE9 update, twice, and it continues to fail.

  I am running Vista 32 Home Premium SP2 on Samsung Q210 with Norton 360 v5, SpywareBlaster, and Spybot - Search & Destroy.

  Now, I think that the problem with IE9 was not related to HP, but a replacement of Windows Update for drivers 'Intel Corporation - display - Mobile Intel (r) 4 Series Express Chipset Family': Intel Corporation display software update released in February 2011 (link useless http://winqual.microsoft.com/support/?driverid=20411791).   IE9 has started working OK when I put "use software rendering instead of GPU rendering *" (see http://forums.whirlpool.net.au/archive/1678709 , regarding 'module igdumdx32.dll vulnerabilities'), so now will consider remove this update.

  Sorry to disparage HP.  MS does this to themselves, as usual.

• Keyboard stops working after you press caps lock.

  On a compaq laptop presario CQ60-300SO the keyboard stops working after you press the caps lock button. The keyboard does not work once the computer starts, but after going in under the keyboard properties control panel and press the 'OK' button, this will work. Buy keyboard works when the computer RECORDS, so I can't get to BIOS. The keyboard work until windows starts and I activate it via the properties of the keyboard by opening the window and press OK immediately. I tried updating the driver but I only find that the keyboard already has the most recent drivers. I tried to restore the drivers and that does not work either. I also disabled start all programs and services to see if it was a problem caused by a program or service and still no luck. It's a very strange problem. I noticed that the keyboard IRQ ranges are both 64-64 and 60-60, which i thought was weird but that's maybe normal. Any advice will be appreciated.

  Hello

  You did changes to the computer before the show?

  Try the suggestions in the link and check if it helps:

  Troubleshoot keyboard

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-keyboard-problems

  You can also post your query on Compaq support forum:

  http://h30434.www3.HP.com/

• My CD/DVGW device stop working after iTunes was installed with Apple records.

  My CD/DVGW stop working after you install the program iTunes with Apple records. The letter (e) are attributed to him does not appear in computer (Windows Vista Home Premium), as it was before. Every time the PC is switched on or reboot, a message from Apple saying "AppleSyncNotifier.exe point of entry is not found. The procedure entry point sqlite3_prepare_v2 could not be found in the dynamic library SQLite3.dll. "The HP device proves that this CDROM works. iTunes has been removed, but the apple files are still there. Driver Detective advised to remove the filters from the registry. Only the filters 'less' appeared and has been deleted. This does not solve the problem. Should I delete all Apple records that have been installed with iTunes? This will damage other programs?  Reinstall the driver for this device does not resolve the problem.  !  yellow sign keeps appearing in the parity for this device handler. Systen restore does not a remote date just to put it as he was back. Can someone help, please?

  Hello

  Having too many competing programs from loading at startup CD/DVD can cause these problems.

  Deleted? Or did you correctly uninstall iTunes? Check with iTunes support for complete hair removal methods.

  ---------------------------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">