Hi, my PC does not start, it displays a screen with lines and then turns black and that of it, can you help me?

Similar Questions

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I'm trying to re - install windows xp. I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

  My first attempt seemed to work although I don't not re-install all the drivers at this time here.  When I then turned on computer, I got a white screen.  I took advice and tried to install xp again.  I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

  Hello

  It seems that this computer is not able to detect the drive. Use the steps described in the article mentioned below to clean the disk, and then try to install XP.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  If you are able to boot to the desktop without inserting the disc, please perform a flat installation.

  How to perform a flat Installation of Flat copy CD to hard drive:
  http://support.Microsoft.com/kb/294727

• I managed to uninstall my acrobat pro, but my adobe application manager seems to think that I still have it. I do not see how to download it from adobe and re install. Can anyone help? I spent many hours trying to get my creative cloud version

  I managed to uninstall my acrobat pro, but my adobe application manager seems to think that I still have it. I do not see how to download it from adobe and re install. Can anyone help? I spent many hours trying to get my creative cloud version to run after the license of first years has failed. It was a bit of a nightmare and sie Adobe is not easy to get help from.

  I spent a few hours trying to untangle a redemption code. I dropped so uninstalled acrobat, because he is no longer works apparently.  I managed to find out how to buy a new redemption code for creative cloud through the Institute where I exposed, but now I can't get a download for my acrobat, one that will work on my macbook pro 2010 running 10.6.8

  Navigation in the adobe site was not easy and not very impressed in terms of achieving support for the problems and responses so far. Only no reply emails usually that means logging in time and time again.

  LTA

  Thanks to all of you who tried to help him. I thank can I have managed to sort it out.  It seems that I can not have uninstalled initially, but I could not access the program and all my pdfs, opens in preview.  I found another uninstall program that seems to have done the trick as my adobe application manager is now let me download.

  I hope it will do the trick and my thanks to all who responded. Bravo guys. I hope that I won't make the same mistake next year ;-)

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Firefox does not start "XPCOM" message pop up, my user and passwords! ??

  My window 7 was not starting up properly so I did a system restore and now firefox does not start a message appears indicating "XPCOM" and I googled and all is said to reinstall Firefox. I don't usually to reinstall immediately because I need my passwords and username back. I can't find a solution on the forums, or if there is I have not found or I simply did not understand the solution itself. Please get back to me as soon as possible

  Thank you!

  Is a restoration of the system to a cancellation of the recent updates or something more radical?

  You can do the following type of reinstall without touching your settings files. Important: uninstall NO Firefox first. That is not necessary.

  Clean reinstall it

  (1) download a fresh Installer for Firefox 36 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) the release of Firefox.

  (3) to rename the program folder

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  When you start Firefox, you may need to use the Profile Manager to return to your regular profile. Ignore: copy/paste glitch.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• The app on the market does not start, the page is white with some Blue Cross top left.

  The market does not start even on the internet.

  Hey Karin!

  I'm sorry you had to go through the frustration that you presented this nuisance. I am very pleased to hear that these steps solved your problem. =)

  Enjoy new applications you find on the market of Firefox. Here are a few suggestions that I find very useful, to help you get started:

  • Documents Viewer
  • Notes, you can synchronize with Evernote
  • PDF Viewer
  • File Manager
  • ConnectA2 to be able to chat with users of WhatsApp
  • Telegram, Open Source, cross-platform and safe customer chat
  • Dial.Radio, because all the world could use a little music on their lives

  Have a wonderful day and please feel free to post new threads in the SUMO forums, if you have other questions about your Firefox OS device.

  Thank you

  -Ralph

• my wifi is not working, and my troubleshooting does not start on my computer toshiba laptop? and he tells me that my bluetooth must be turned on?

  my laptop WiFi does not work and when I try to trouble shoot the problem he told me that my troubleshooting does not start and also, I get a message telling me that my Bluetooth is turned off?, but this problem all started when I tried to sing on the web and it keep going back to the sign in screen then I cleaned a lot and finally was a less able to get to my office on it but still no wifi and not able to start troubleshooting and still receive a Bluetooth message not on. ????? Help! Please, I beg you!

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the brand and model of the computer?

  2. what exactly happens when you try to connect to a WI - FI connection?

  3. you get any error message?

  4. are you able to connect to the Internet by cable?

  5 are. what store you referring?

  6. what operating system is installed on your computer?

  7. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  If this is a recent problem, then you can try a system restore to Normal mode or safe mode and see if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  For Windows 7: http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Reference: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please follow these recommended steps and post if you still experience the problem.

• XP labors heavily and Will does not start (sometimes even in safe mode.) "And if it starts in the DM, it will freeze when I try to enter to change anything).

  I have a XP computer. During use, the power supply cord unplugged and computer is dead. When I tried to restart it, it will go to the blue screen with an error, go to the screen that asks if I want to start in safe mode. It does not start in normal mode, but it does get my wallpaper and stay there. Sometimes Windows XP screen and stay there. It really starts to make a lot of noise when one of these things happens. Don't know what to do. I have a XP OS disk Dell provided with the computer. Any ideas?

  Repair the Windows XP installation - you should have all your files intact.

  A repair install will replace the system files with the files on the XP CD used to the repair facility. It will leave your applications and settings intact, but Windows updates will have to be reapplied.

  http://michaelstevenstech.com/XPrepairinstall.htm

  Good luck.

• XP does not start at the logon screen

  Original title: XP will not boot:

  When I try to start Windows XP, the computer stops responding it hangsup lack of a better word with a black blank screen immediately after that the windows logo splash screen is complete.

  Usually after the logo splash screen the winlogon.exe resumed and should begin to the local security authority (Lsass.exe).  At this point the "welcome / login screen should appear.»

  I've tried safe mode and the computer hangs at some wile loading point drivers.  I tried last known good configuration and the computer crashes just straight up.

  I don't think that it is material, because I can use a floppy boot Lennex and material seems fine in mode lennex.  I can start the recovery console and I used several commands, but I was not able to find an error and or fix the problem.  Has anyone seen or heard talk about this before?

  I don't think that it is material, because I can use a floppy boot Lennex and material seems fine in mode lennex.  I can start the recovery console and I used several commands, but I was not able to find an error and or fix the problem.  Has anyone seen or heard talk about this before?

  First of all, Linux is not dependent on any of the installed equipment. Specifically, the hard drive. So, you could always start from the disc even if you had a failing hard drive.

  Secondly, what commands do you use in the recovery console? The commands below are what you should use.

  Chkdsk /r > Enter

  Fixboot > Enter

  FIXMBR > Enter

  If after running these commands the computer still does not start in Windows, you should probably test the hard drive.

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.