Hi, problem with the cartridge

Hi my printer is HP Deskjet 3050. Today, when I intend to use, the screen of the printer, ' problem both cartridges. I don't know, because as the ink cartridges. Included black ink are new. What can I do?

Advertisement

In the paper here troubleshooting steps can help resolve the error of HP Deskjet 3050 all-in-one printer ink cartridge.

Tags: HP Printers

Similar Questions

  • Problem with the rules after upgrade of the VM in foglight cartridge

    Hello

    There is a small problem with the rules after that I updated the VM cartridge level.

    In the default rules, I changed a few settings so that they will act as I need.

    However, each time I upgrade VM cartridge my rules are off and marked as backup.

    The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

    Best regards

    Victor

    This is the normal behavior according to this KB article

    https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

    105872 knowledge article

     
    • Title

      Backup rules fill in the dashboard management rule after Foglight upgraded
    • Description

      After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

      Cluster VMW IO network
      Cluster VMW IO network (backup)

    • Resolution

      During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

      Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

      When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

    Golan

  • HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

    I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

    It is said:

    "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

    I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

    HP Officejet Pro 8600 +.

    Product number CM750A
    Sequence number {content removed}
    Not under warranty

    Please notify.

    I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
    http://goo.GL/BXDFf

    It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

  • HP Officejet 5740: there is a problem with the printer

    Every day the printer (not standby) turns on and shows "there is a problem with the printer. Turn the printer off, then on. "why what is happening every day?

    This problem got solved, later. Although tech hp sent me the ink HPInstant and that they "reset" of my printer, the error message returned in a few days and continues every day. Another call to Tech Support/InstantInk advised me to return the printer for an Exchange (it's 60 miles a way back). We decided to install Instant ink cartridges, as a last resort to resolve the error messages, and it worked. No error message. I put the original ink cartridges in the printer I can use those to the top. Still no error message and this printer now works well. PERSONAL OPINION: When we enrolled in instantink, hp tried to contact our printer via wireless (whatever) and when it failed an error occurred every DAY, after the installation of the instant ink cartridges a connection has been established at hpinstantink have finished the registration process.

  • OfficeJet Pro 8600: message "problem with the printer or ink system.

    I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

    If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

    Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

    Does anyone else have this problem or advice?

    Hello

    Please click HEREto access the procedure which should solve the problem.

  • HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

    "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

    HP has a center of service to Puerto Rico, where I live?

    Please tell me there is a solution for this problem.

    In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

  • OfficeJet Pro 6830: There is a problem with the printhead

    There is a problem with the print head.  Or can not find the print head

    This problem just started happening. Everything was ok after replacing the cartridges of printers with HP cartrighes for this printer, printed since the replacement of cartridges.  I followed the instructions given by your troubleshooting solutions.

    turned off and unplugged, removed and replace the cartridges back in, printed on a sheet of paper indicating that the print head was aligned, printed what he needed at the time and now does it again.  I repeated the above instructions and it just keeps saying the same thing.

    Open the link: www.hp.com/contacthp/
    Enter your product number or select Auto detection
    Scroll up to "still need help? Fill out the form to select your contact options.
    Scroll down and click on: contact HP options - click Get phone number
    A file number and phone number will be displayed.

  • HP OfficeJet Pro 6978: There is a problem with the printhead

    I am trying to install my new printer.  Turned on, the screen displays this message: "Is there a problem with the print head."  I have downloaded all the software and drivers, installed ink cartridges that came with your printer, followed the troubleshooting online and still the message will not go away.  I registered the product and tried to contact the HP support, only to get the message that this device is no longer supported by the HP BRAND - it's NEW!  I can't find phone # for support, so I'll try this forum.  If no help, I will just return it.  Very frustrating.

    As it is brand new is not same Jack with it. Take it for a full refund and buy something else.

  • HP Officejet 6600: problem with the printer or ink system

    I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

    Hey @popcorn101,

    Welcome to the Forums of HP Support!

    I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

    I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

    HP technical support are available by clicking on the following link:

    Contact HP support

    (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

    (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

    (3) Once finished, click on the 'Show the Options' icon in the lower right.

    (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

    I wish you good luck going forward with this!

  • OfficeJet 8600: HP OfficeJet 8600 'problem with the printer or ink system '.

    We have replaced the cartridges (with HP) and now we can print only about 1/2 a page, sometimes 1 page-, then it displays an error, "There is a problem with the printer or the ink system" and the printer should be set and to continue...

    We bought new (2nd series) of the ink cartridges and the same behavior exists.

    It seems to point to a new print head - but those who are more expensive than a new printer.

    Are there other measures I could take to try to resovle?

    I can't find scraps of paper (ie: torn, jam, etc.), nor any excessive ink any where - everything seems pretty clean.

    I removed the print head and cleaned the contacts.  I cleaned the contacts on the ink cartridges. I ran "Clean print head" in the Tools menu (which results in the same error)

    There are sometimes up to 3 of these messages "stacked."

    It is died regardless of what was asked of it... ie: print from netowrk, printing via usb, copy color, copy b & w, etc..

    Hello @jassing,

    Thanks for posting in the Forum from HP Support.

    I understand that you are experiencing a recurring error state in your HP Officejet Pro 8600 e-all-in-one printer.  I want to help you with this.  While it is clear that you have tried most of the recommended troubleshooting steps, I have some additional suggestions that might help.

    HP article presents common troubleshooting steps in order.  You can give these another shot before trying the more intensive step that I have in mind.

    If you have tried all of the above and your problem persists, click here to check the status of your printer warranty.  If your printer is currently under warranty, please call our technical support in 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    If your printer is NOT IN WARRANTY, try the following:

  • OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

    OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

    Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

  • Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

    I have a photosmart 7520 affected by the following issues.

    Issue #1: randomly, all lights start flashing market and the screen reads the following:

    Error. There is a problem with the printer. Turn the printer off, then on.

    I can't find a move that throws this to happen.

    #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

    When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

    From what I can tell the printer restarts itself.

    It is plugged directly into the wall outlet, no surge protector.

    Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

    THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

    This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

    If someone is or has experienced the same or similar problems, I could sure use help.

    Solved myself.

  • HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

    PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

    I always get the same message!

    This article should help to resolve the error you get:
    http://support.HP.com/us-en/document/c03081973

    Try the steps and tell us if it helps.

    Good luck!

  • Problem with the host view

    Hi all.

    I have a problem with the display of my physical host information. I installed FglAM on the server, deploy the cartridge of the OS, create agent. But when I access the dashboard of the hosts, I see that my host currently does not monitor.

    Agent log is good (logfile to join). I see same alarm of this host, but no performance and other information.

    Thank you

    Nikolai, I recommend that you should open a case of pension for later analysis.

    David Mendoza

  • 0x61011beb problem with the printer or the ink system? Please HELPPP!

    I just bought the HP Photosmart Plus printer and it keeps coming back:

    Failure of the printer

    0x61011beb

    There is a problem with the printer or the ink system. Turn the printer off, then on. blah blah blah.

    I rebooted, disconnected, out cartridges many times. I did a lot of things on sites like unplug and wait 60 seconds and then put cartridges back and nothing works! Help me understand this im out, so frustrated.

    Thank you!

    Your error code is a HARDWARE problem.

    Try a partial RESET

    from the home screen

    To access the Help Menu home/Idle screen, tap Control Panel 4 times in this order-

    Lower left (BL) / top left (TL) / BL / BL to the Support Menu displays on the Control Panel, and then press OK

    (press the arrow to the left, "home", arrow, the arrow back button back)

    then select

    Press Menu >

    Resets the Menu >

    Partial reset

    If this does not work, you will need a new printer.

    call 1800.474.6836

    You may be eligible for a free replacement. have your product serial number ready.

Maybe you are looking for

  • iTunes crashes after upgrade to version 12.4.3

    Hello whenever I start itunes after the upgrade to version 12.4.3 the following occurs: The application starts, it checks the mediathek itunes, the iTunes window opens for 1 or 2 seconds, and then the application crashes. What can I do?

  • I have a problem connecting to the internet with remote access.

    Hi I have a laptop Dell Inspiron. I installed Vista and now I am unable to get on the internet. I use the dial upward at home. None of my ISP disc make me on the internet... It gives a message that there is a problem with the hardware. What can I do

  • WLC 2504 several VLANs multiple SSID

    I have three sites Data center management unit A - main - controller + Access - Point IP 172.16.x.x - Vlan 38 Unit B - system managed by controller IP 172.17.x.x - Vlan 38 Access Points Unit C - system managed by controller IP 172.18.x.x - Vlan 38 Ac

  • need to login username and password for the VCS eggs...

    Hello guys,. I have download the eggs and intall it in my VMware Workstation, while I turn it on, I found I do not know the user name, password and ip address to access... can u help me find the information? Thanks in advance. Home downloads Products

  • Issue of Muse

    HelloI created a website with Adobe Muse and just downloaded from the site. The work plan (black line around the edge) is visible... is it all the same to disable this or get rid of it?


HashFlare