Hi there - already I bought a month of adobe stock (10 pictures per month) and cancelled it after a month. The system is not offered this choice. Help, please. It meets my needs, I won't be frozen for more than a month. Thank you

Similar Questions

• Help, please! CHKDSK stuck at step 4 of 5-6% for more than 90 minutes. If it is frozen? What can I do?

  Not very intuitive with the hard disks, disks, partitions, etc.  A friend told me I should be defragging my computer frequently to help it work better.  Then, I looked at steps to defragment and learned to run chkdsk first before you defragment.  I clicked on properties, tools, scheduled chkdsk for my C drive, checked the boxes ("automatically fix file system errors" and "Scan for and attempt recovery of bad sectors") and rebooted my computer to run the chkdsk command.

  Here is what my screen said during the last 90 minutes:

  The type of the file system is NTFS.
  volume label is PRESARIO.

  A disk check has been programmed. Windows will now check the disk.

  CHKDSK checks the files (stage 1 of 5)
  (deleted and corrupted files verification of such complete record)
  CHKDSK is checking the indexes (stage 2 of 5)
  (same as step 1... full check)
  CHKDSK is recovering lost files
  CHKDSK checks the security descriptors (stage 3 of 5)
  Security descriptor complete check.
  CHKDSK checks Usn Journal
  Audit of the USN Journal is complete.
  CHKDSK is verifying file data (stage 4 of 5)
  6 percent completed.

  And that's where he lives.  My computer is frozen?  I hear the tour runs every so often, as I work with something, but does not change the 6%.  I'm afraid to turn it off in the middle of DSKCHK but I don't know what else to do.  Help, please! I have windows XP Home Edition.  I had problems with my PC freezes in the past, but I usually just choose a restore date and it solves the problem for a while.  I had no need to restart in a while, I just wanted to start to defrag regularly to help the pc normally elapse.

  "PLEASE HELP!" I have windows XP Home Edition. »

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• A frozen (for more than an hour) when installing Win7 updates

  During the installation of updates during a restart, IQ506 froze, although few 'circle' still rotating, for more than an hour so far.  Message says not to put off, but nothing happens.  Where should I go from here, if I am not in power down?

  A few times just to give up and put off, I look at the HD indicator, if it goes 30 minutes without blinking I give him a strong power off, if the HD is flashing I will usually let it run all night

• Is there a way to remove the icons on my desktop without deleting the associated files when right-clicking on the icon does not offer this option?

  Most of the icons that appear on my desk I have download the new application files can be removed without uninstall or remove related files.  But when I right click on the icons that appeared after reinstalling Panda Internet Security and download of Adobe Reader software to date there is no option to remove the icon, there is rather a prompt asking you if I'm sure I want to move the file to the trash - which I did not.  When I look at 'properties', I see that the location for the two is my office.  I'm trying to reduce the visual clutter, is it possible to do?

  Hello

  Click right icon - properties - general tab - Type of file - if it is a LNK then it's only a
  Shortcut and if you DELETE it then only it is removed and the underlying program is not
  affected. To see where the program check the tab shortcut - target:.

  If she is not a LNK and is a. EXE, com, bat and others so if if you delete the file
  (which is not a shortcut) and then the program will not work. Shortcuts usually have ARROWS
  on them in the lower left corner.

  For programs that are stand-a-lone (were copied on the desktop and not installed) you
  can make files elsewhere and copy them (and other parts such as.) DLL or. CFG
  only as examples and some will have no other room) to then remove them from the
  Desktop computer. If you have any programs that were installed on the desktop, you need to uninstall
  them and their re - install elsewhere.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• We pay each year for the Pack of PDF from Adobe ($89.99). We are not able to convert a PDF document to Word.  After clicking on the button convert an error appears.  Help, please.

  I'm unable to convert a PDF to a Word document.  We have Adobe PDF Pack and paid annually. Help, please!

  Use Acrobat Reader DC.

• I have a 15MB email sitting in my Outbox. How can I remove it because they say, it is already transmitting... He passed for more than 24 hours

  Error message - I have a 15MB email sitting in my Outbox.  How can I remove it because they say, it is already transmitting... He passed for more than 24 hours

  Error message - I have a 15MB email sitting in my Outbox.  How can I remove it because they say, it is already transmitting... He passed for more than 24 hours

  No guarantee.
  Open Windows Mail > file > work Offlone.
  See if you can now delete.

  t-4-2

• The camera earthquake won't, Ive been using after effects for more than a year, perplexed absoloutley! Help

  OK, Exactley the description of what said...

  Ive been using AE for more than a year, but did not use wiggle cam because I was studying my course... I understand how it works I all click the stopwatch to null Position then wiggle (12.34) etc. (is that at the time?)

  But that when I RAM Preview does nothing nothing at all... I can't work on what could I possibly missed because Ive looked at a lot of tutorials and I do exactley what the guardian did but to no avail...

  SooOo bizzar and frustrated...

  IM thinking maybe something to do with information wiggle? or is it a lousy option I have to reset or something?

  Thank you!

  Do the film layer 3D. Problem should be solved. You have no 3D elements in the scene. The camera position has no effect on a 2D layer. It would also be useful if your null was 3D.

• When I click on close downcomputer the hourglass appears on the desktop for more than a minute before the closing down of the icon is displayed

  When I try to shut down my computer, I click on start > click on computer of closing and the hourglass appears on the Bureau for more than a minute, when the close icon appearsand I click on it, it takes about 2 minutes to turn off actually. Any suggestions

  We need more information!

  Borrowing another post by ElderL (the same "JoseIbarra' that Elizabeth23 already mentioned):
  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Do you have the Windows Desktop Search installed issue?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  ___________________________________________________________

  Once you answer these questions to the best of your ability, a lot of people here (don't forget that almost all of us are volunteers who are also using Windows XP) will probably be able to help quickly resolve your problem.
  That (ElderL also) might help, too (because its results will contain many answers to the above questions):
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• Laptop is blocked at the installation of 10 out of 17 Updtes for more than three hours

  Laptop last night quit unexpectedly. This morning when I started the machine, it was locked to the installation of 10 of the 17 updates for more than three hours. I tried to turn off the machine, but I still get the same message. How do I get this at the end to restart properly

  Hello
   
   
  1. remember you number updates that have been installed?
   
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 2.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
   
  Method 3.
  I recommend you to restore system using a Windows 7 DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
   

  If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.

   

   

   
  I hope this helps.

  Kind regards
  Support Microsoft Savan-

• Get Windows 7 is not genuine for more than 6 months on laptop

  I have Windows 7, I bought with an Advent Roma 3000 laptop from PC World over 2 years ago.  For more than 6 months now, I get a message that my Windows is not genuine and there is a message in bottom right of the screen "Windows 7 Build 7600, this copy of Windows is not genuine."  IT IS!  I've been to PC World, which just re-installed Windows 7 and said if it happens again I had to do it myself.  I've done 4 times and each time after about a week, it happens again. I bought it in good faith.  Obviously a MS update changes the status of Windows.  I've had enough, and if I can't sort I will soon buy a new machine, which will be an Apple because MS doesn't give a sh * t.  I tried to contact them, nothing works!

  You can also try the following:

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• What is this average "use no snapshot for more than 24 to 72 hours.

  All,

  We use snapshots to test a lot. I'm trying to justify the use of snapshots for our case. I saw the best practices and understand the negative impacts of the snapshots.

  Best practices: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1025279

  Best practices says "use no snapshot for more than 24 to 72 hours." Snapshots should not be maintained for long periods of time for application or Virtual Machine version control".» My understanding of the above is that we do not run or keep running virtual machine or use it on a specific snapshot for more than 24 to 72 hours, and that's okay create a snapshot and hold it for a period longer than 72 hours, so that we can return to him. Is this correct?

  For example, there are two snapshots in a virtual machine at the same level are not nested.

  VM1

  -TestSnapShot1

  -TestSnapShot2

  For testing purposes, developers go back to TestSnapShot1 or TestSnapShot2 and do their tests. Most of the time the virtual machine is used for a day or two in its current state, after what the VM is back again for testing. The snapshots themselves remain many more months.

  Run the virtual machine for more than 72 hours could lead to more changes of the original and the delta records increases in size, returning the VMS to the snapshot will reset the drive from delta to the same size it was when it was created. If it minimizes the delta increasingly drive out of control so we do not run for long periods on a snapshot.

  This is how we currently use snapshots.

  Is my understanding correct, or should not even maintain us a snapshot for a long period of time.

  Thank you

  -Kiss

  what you are referring

  "Don't use any single snapshot for more than 24 to 72 hours. Snapshots should not be maintained for long periods of time for application or Virtual Machine version control purposes.

  is for virtual machines in Production, i.e. where it is always best not too keep snapshots during a prolonged period of time.

  But the use cases that you refer is different, for this purpose, manage your photos in the way which find you most suited to your needs.

• What happens if I don't have internet connection for more than 30 days, with a monthly Photoshop CC license?

  I know, I have to connect to the internet to validate my monthly subscription to Photoshop CC. What happens if I can not connect to the internet for more than 30 days? It will be expired immediately, or changes in the first instance, or there is a period of grace for this?

  you will not be able to open ps after 30 days.

  (on the other hand, if it is already open on the 30th day and you leave it open, it must continue to operate unless you shut up.)

• No E-mail shows for more than a year

  I did receive email watch for more than a year, although the watches are created and saved. When I go to www.oracle.com and click on the account, I see that my full email address is here. Forums, when I click on Control Panel, I see that the e-mail address is truncated and are missing @hotmail.com. I wonder if this has something to do with it, but I don't see a way to fix it. Everything that I click on a email truncated grayed or already complete email so there is nothing to fix. Can it be fixed somehow without losing anything else?

  Barbara Boehmer has written:
  I did receive email watch for more than a year, although the watches are created and saved. When I go to www.oracle.com and click on the account, I see that my full email address is here. Forums, when I click on Control Panel, I see that the e-mail address is truncated and are missing @hotmail.com. I wonder if this has something to do with it, but I don't see a way to fix it. Everything that I click on a email truncated grayed or already complete email so there is nothing to fix. Can it be fixed somehow without losing anything else?

  Yes that is the question

  The question is, how do I log into the forums? With your full email or just part of it? Your username in the forums is non-email the basis, therefore, shows none of the emails.

  And Billy, you can change the preferences look in the control panel. If you wish, I can delete your watches if necessary

• Try to use the same pattern for more than two channels (CSR configuration) with usb 6000

  Hello

  I am currently trying to implement a LabView code to get readings of voltage using 5 different places at the same time. I want to only use the first location in the ground and get 4 measurements of voltage between the ground and each of the other 4 channels. I use a USB 6000 which, for now, allows me to use the same pattern for only two channels. Is it possible to use the same pattern for 4 channels?

  Thank you

  Maria

  The images do not explain everything. You must explain what are the sensors. I think you totally wrong on how they should be linked. CSR, all sensors must be a common understanding and the outputs not individual channels as I have already explained. If you are unable to do this, you should probably not use CSR and you have the wrong data acquisition device. If you want a side of a sensor as a reference, you need differential connections.