Hibernate does not

Similar Questions

• Hibernate does not work on my Tecra S10-101

  Hibernate does not work on my new Tecra S10-101. I searched the internet but
  has not found a good solution. Cuisne someone provide help to solve this problem?

  Kind regards

  Bert

  Please explain the problem more.

  What do you mean by "does not?

  You can enter at least hibernation?
  Pick up from the hibernation failure?
  Hibernation is missing in power options?
  Are you running XP or Vista?
  What Service Pack you have installed?
  Did you install your own version of Windows or is - what a correct installation of Windows from Toshiba?

• Hibernate does not work under vista

  My PC won't come back into hibernation automatically. Can someone tell me how to set power options to please?  Thank you

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658
  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hibernate does not work in Windows server 2012

  I am an engineer of BIOS.

  Its getting hang everything resuming from hibernation.

  Found below log in Event Viewer.

  "Windows to not resume from Hibernate with err status 0xc0000411.

  Please provide any information that we (BIOS) are missing to give give Windows. Or the status of the err suggest a hardware failure.

  Any information here will be useful to me.

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Hibernate button does not appear on the start menu

  Hibernate button does not appear on the start menu

  Hibernate button does not appear on the start menu

  Here is the link to MS Help and support about the case.

  http://support.Microsoft.com/kb/929658

  Note : scroll down for more information and find out if your computer supports the hibernation.
  Note: If the computer does not support the hibernation feature, you cannot enable the feature.

  t-4-2

• Satellite A660 - 11 M - brightness adjustment does not work after hibernate

  Sometimes, I find that you use F6, F7 to control brightness does not work. This only seems to happen after a fresh reboot, but after being out of hibernation.

  I am running Win 7 Home Premium 64-bit and using the latest NVidia driver (obtained from toshiba yesterday Web site): 8.16.11.8988

  A way to solve this problem?

  Hello

  From my own experience, I can say that all the FN buttons work perfectly after hibernation, standby, restart, etc.. No problem at all!

  I put t know what is the problem, but in your case would be to reinstall the package of added value and utility to Support Flash Cards. Two tools to control the FN key functions and can be downloaded from the official page of Toshiba.

  But before you reinstall it, remove older versions first. Then install VAP, restart and finally Flash Cards Support utility.

• Equium A60 - standby and Hibernate function does not

  I have a Toshiba Equium (or Satellite) laptop A60 - bought in 2004.

  The problem that I have with him, it is that the sleep feature is very + capricious. Times it usually works. At worst it's working only a small proportion of the time. Very bad moments it never works at all.

  When startup fails I open the screen and the computer turn on, I hear the fan and hard drive, but the screen is just black display (although the backlight is on in the background).
  Sometimes, the mouse pointer is visible at the center of a black screen Uni and at other times small forests of window are visible - but the screen is still black.
  The computer is in a State of brain death, and I have to turn it off and restart to get it working again.

  I've been through this forum looking for ideas and tried without notable success the following:
  Disabling wake-up-on-LAN
  * I have already installed the latest version of the BIOS.

  I need to know how to solve this problem because my A60 is getting old and so it tends to become very hot if left running for a long period at a time.

  The total number is A60 - PSA67E 00200D8J

  I am running Windows XP is installed on original Toshiba drive - but with 5 years ' worth of Microsoft updates added on top. When I tried to reinstall the operation usually on the eve of the OS works, but by the time wherever I installed all the extras (drivers card wireless firewall, AV,...), it goes back to be unreliable again.

  Thanks in advance for any help.

  Hello

  > When the night before fails, I open the screen and the computer turn on, I hear the fan and hard drive, but the screen is just black display (although the backlight is on in the background).
  > When I tried to reinstall the operation usually on the eve of the OS works
  > I need to know how to solve this problem because my A60 is getting old and so it tends to become very hot if left running for a long period at a time.

  This means that after the installation of a new OS everything seems to work properly but after a short time the night before fails again one generally, this occurs when the laptop gets hot.
  Is this good?

  Hmm I think you should check if the high temperature does not affect the functionality of the laptop
  This is perhaps the main reason for your question.
  So I recommend to clean the vents and to remove dust using the jet of compressed air (you can get it from most computer resellers)

  In very rare cases, it would be helpful to renew the thermal grease which is placed between the cooling module and CPU.
  But this must be done ONLY by a mobile technician because the procedure of disassembly is really complicated.

  Update the display driver too. This could help to resolve the problem with the black screen.

• NB100-12N, 3G modem does not work after hibernate

  My computer is a NB 100 - 12N with Windows XP Home SP3. It is equipped with an internal modem to 3G, Modem Broadband Mobile F3507g from Toshiba.

  When the computer is started, Wireless Manager 5 starts and automatically connect to the internet through 3G modem. However, if the computer switches to hibernation Wireless Manager gives the error message "no modem mobile broadband not connected" (freely translated from Swedish as I have Swedish version). I can't find anyway to get it back except reboot the computer from scratch.

  The computer is also equipped with WIFI and as I suspected a collision between two network systems I tried to disable the WIFI network. This did not make a difference however.

  Suggestions anyone? I hope you can help because using a laptop (in effect) without hibernation is quite annoying...

  Sara

  It also not help to close the Wireless Manager and reopen it again.
  If this does not help, have you updated to the latest FW, driver manager and wireless?

• X120e - yellow USB port does not support suspend or Hibernate

  I have two options enabled in the BIOS, but the yellow charge USB port when the laptop is awake.  I use the latest BIOS and drivers.  Does anyone else have this problem?

  It is enabled in power manager. I just read the help dialog here and it does not mention that it will only charge when connected via AC what kind of defeats the purpose for me. I was hoping I could recharge my phone off of the battery of the x120e, while he was in hibernation.

  I guess that "always on USB" isn't exactly "Always on" Oh well

• Windows 7 does not sleep or Hibernate

  So a few days ago my computer updated after having done a repair of Windows 7 Pro install. Then he found 235 updates and proceeded to download. However, my computer is restarted, it could not configure the updates, and now he can't sleep or standby extended. It will also connect to a projector. Can anyone give me any suggestions? Please do not suggest restoring the system, because it does not work either.

  For more help with the graphics card, you can uninstall and reinstall. To do this, see this link .

  Let us know how it goes.

• Watch does not dead

  Watch does not dead

  Your Apple Watch become hot?  It will not charge if it is too hot, see this help page:

  https://help.Apple.com/watch/#/apd707b42a5e

  Temperature Apple Watch is designed to best operate in ambient temperatures between 32 ° and 95 ° F (0 ° and 35 ° C) and stored in temperatures ranging from-4 ° to 113 ° F (-20 ° to 45 ° C). Apple Watch can be damaged and life of shortened battery if stored or used outside of these temperature ranges. Do not expose the Apple Watch any major changes of temperature or moisture. If Apple Watch inner temperature exceeds normal operating temperatures (for example, in a hot car or in direct sunlight for long periods of time), you may experience the following when attempting to regulate its temperature:

  • Load maybe slow down or stop.
  • The display may dim.
  • A temperature warning screen may appear.
  • The transfer of certain data may be suspended or delayed.
  • Some applications may close.

  Important: You may not be able to use Apple Watch while the temperature warning screen appears. If Apple Watch cannot regulate its internal temperature, it passes in Hibernate mode or power reserve, until it cools. Move Apple Watch to a cooler location out of direct sun and wait a few minutes before trying to use Apple Watch again. For more information, see support.apple.com/kb/HT204508.

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Satellite A305-S6858 win XP video driver does not

  I recently bought a Satellite A305-S6858 in the States and I went down the Edition Vista Home premium preinstalled
  for Win XP 32 sp 3. I had several problems to lift the computer up and running. After reading several posts
  on various forums, I managed to install the OS, but I still cannot use the Intel video driver.
  After the installation of those available on the toshiba site I still have in the Device Manager under the node for the video card
  2 entries for 965 Chipset Mobile with an exclamation point.
  I recently discovered that not having is not the video driver installed the operating system does not allow Stanby and Hibernate power options.
  If someone has stumbled in the same issue?
  Thank you

  You must install the basic drivers first.

  Try to install the driver for the Chipset Intel first, then the display driver.

• Tecra M2 - standby, hibernation does not work

  I use Tecra M2 with Windows XP and Office 2003. If I try to put my cell phone in "standby" mode or "Hibernate" nothing happens... the computer remains always on. Only "disconnect" and "closing" works correct. Also do not work Fn + F3 and Fn + F4.
  Any ideas?

  Hello

  you have the Toshiba Power Saver installed? If so, you must uninstall and download the current https://eu.computers.toshiba-europe.com

  If this solution does not keep me!

  Chris

• Satellite A300d - 14 p PSAK8E and Ubuntu 8.10 - ACPI does not work

  I installed Ubuntu on my laptop, everythings ok, but ACPI does not work.
  I can't Hibernate, shutdown or see the State of the battery.
  When I boot, I get:

  3.009333] managers:
  3.009376] c0277448 (acpi_irq + 0 x 0/0 x 28)
  3.009480] disabling IRQ #9

  Can anyone help?

  Hello

  I have no experience with Linux, but if you want to learn more about Ubuntu and are looking for good answers
  Please check follow announcement - http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=3

  Good bye