Hibernate, start, sleep problem Pavilion ts 14

Similar Questions

• Close / sleep problem - HP Pavilion Notebook PC 15-e055st

  I have a problem with my laptop HP Pavilion 15, model 15-e055st, I bought two months ago with pre-installed Windows 8. I put tax at the operating system level to Windows 8.1 and seemed to work OK.  Then I used the HP Support Assistant to a few important updates, including BIOS and other software.  Following the HP update, that the computer would not Shut Down or sleep, but restart worked OK. When I try to stop or sleep, the screen goes black but the power light and the wifi of the keyboard light stay lit and the fan still works.  The machine will not this situation without me recover everything first do a hard reset by holding the power button down for five seconds.

  I trıed restore the software to the State before the update of HP but the problem still existed.  Two days ago, I updated the computer, which cancelled the operating system of Windows 8.1 for Windows 8.0 but closing down / sleep problem is still there.

  Can someone help me?

  It worked for me also!

  DaveyK, I'm really very grateful to you for the solution to this problem.  Thank you!

  I now get with some serious computing, until the next bug happens!

• HP Pavilion dv6-3121: start/restart problem

  Hello everyone,

  Yesterday I installed the Intel PROSet/wireless software from the utility to update successfully, on my laptop computer hp laptop pavilion entertainment dv6-3121.

  After successful installation, I restarted my computer. Since then, my laptop could not start or start. It's just a black screen, saying basically "press ESC to continue."

  I tried the ESC pressed to continue, according to the statement, but nothing happened. The screen is always black.

  I contacted Intel, but they said I need to contact hp, to solve the problem. Help, please!

  I am furstrated and lost a lot of time to solve this problem.

  Thank you, adavance.

  Eze

  Hi @Ezedin,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Entertainment Notebook dv6-3121nr and issues with start/restart problem after downloading the software.

  Here is a link to put the laptop in Safe Mode. From there, you can uninstall the software that is causing this closure.

  If that doesn't help, you could return in safe mode and then you can do a System Restore. System Restore will help if something is automatically updated and do not go well on the Notebook.You may need to consider a day before the software has been downloaded and the question that's happened.

  Please let me know how it goes.

  Thank you.

• whenever I try to make my computer in Hibernate, or sleep, he starts running instead of doing what I select

  Original title: why isn't my Vista system down correctly?

  Last month, I noticed that whenever I try to make my computer in Hibernate, or sleep, it will restart instead of doing what I select.  Several times, it will reboot, sometimes in Mode without failure.  This never used before, and it's really disturbing.  What is happening, and how can I fix this problem so that my computer will sleep or Hibernate when I choose these options?  Thank you.

  Hi Ako1979,

  (1) remember you to make changes prior to this problem?

  (2) you get an error message?

  (3) using a laptop or a desktop computer?  Please provide the serial number and model

  
  Method 1: change the power plan and then check if the problem persists. To do this, follow the steps mentioned in the link below

  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  
  Method 2: to turn off the power on the USB (Universal Serial Bus) hub and then check if it makes a difference

  (a) right click on my computer, click Properties and click the Hardware tab, then click Device Manager.

  (b) double-click to expand, USB Bus controllers right click on USB root hub, and then click Properties.

  (c) click the power management tab.

  (d) clear the allow the computer to turn off this device to save power check box, and then click OK.

  Method 3: Download and install all the available Windows updates
  

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  For more information, please visit the links below

  Change what happens when you close your mobile PC
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-what-happens-when-you-close-your-mobile-PC-lid

  Change the function of the power button on your laptop
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-function-of-the-power-button-on-a-mobile-PC

• I lost the ability to Hibernate and sleep.

  I tried the Fix - It program, but it does not load.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658
  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Spectre13-3010dx sleep problems, Shutdown

  Hello

  I recently bought this ultrabook and I noticed that the sleep and stop functions do not work as expected. Restart works very well.

  Description of the problem

  • When you try to put the computer to sleep, the screen goes black, but the system stays on (lights on the keyboard, the fan spins again). I'm unable to recover from this State unless I make a difficult stop (hold down the power button / stop) or wait 5 minutes, how the computer off simply. This kind of... defeated the purpose of "sleep". Haha.
  • Same thing happens when I stop the laptop - screen turns off, turns on and the fan turned on and unless I turned off by force, laptop remains in a vegetative state for five minutes and then shuts down its own.
  • In both cases, I am unable to recover from the black screen. No response from the computer, regardless of the key combination (Ctrl + Alt + Delete, etc.)

  I dug around here the support forums and noticed other people had issues similar, but on different computer models (i.e., Pavilion, dv6, etc.), so I tried to take these specific solutions to solve my problem, but there has been no result.

  Steps taken to solve the attempt

  • The laptop came with the version of BIOS Insyde F.09, so I updated the version of BIOS to F.13. Does not solve the problem
  • I went into the BIOS and reset all default settings. Still has not solved the problem.
  • I found another thread that the user had the same problem as me, but on a different model specifications. I tried to use their solution to roll back BIOS. However, it has not yet solve the problem.
    http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/shut-down-sleep-problem-HP-Pavilion-note... ***

  Note: Problem of this other user has emerged due to a BIOS upgrade, while my computer was delivered to me with this already existing problem.

  From this moment any help would be much appreciated.

  Thank you

  Mike

  ______________________________

  "I'm very much in the idea of genius to be beautiful." -Sean Booth

  Hi all

  I am not convinced that it could not help others, but they gave me a day after I posted this, notification to install updates on my laptop and these updates fixes the problem. I do not know what updates took place, but they work.

  For those who still know the problem, my apologies. I'm not really sure what HP update to solve this problem.

• Edge 13 sleep problem win7 (intel)

  Hello

  I think I have a sleep problem with my edge. If I close the lid, I can still hear the hard drive by clicking on current time to time and CPU fan. I checked all the power settings and it should go to sleep and nothing should stop going to sleep. Case may be where the cover he never sleeps, but if I choose sleep from the start menu, it will sleep. And I checked all the places it should go sleep by closing the lid.

  Thing worries me a bit, it is that if I run in prompt command "powercfg - a" he reports this computer only supports the S3 (hybrid sleep) and S1 and S2 modes are not supported.

  Mystery solved:

  HW problem!

  A magnet located in the lower right corner of the cover of the computer, under the screen rectangle shaped box is too low!

  I tried one of my magnets "fridge" on the top of my power button and computer went to sleep state and _stayed_ in mode standby.

  * Sigh * I wonder what I should do to fix this problem? Magnetic tape to improve the weak magnet on my computer?

• Acer aspire 5810 gel coming out of Hibernate or sleep. Also a lot of event critical rrasor

  I have an acer aspire 5810 (1 month) and Ive had problems with my computer laptop freeze after I get ut of sleep or hbernate mode. The thing is that I can do is portable power off and all over again. Commissioning has been real slow and trying to look intothis prblem I found I have error system, critica and put warning and I don't know where to start

  Hello

  For slightly more:

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error ' ' system timer was triggered "and hibernation / sleep problem.

  Original title: Hibernation and sleep problem?

  I bought a new laptop of Toshiba C55 series probably a little a month ago and for a while, it was fine, I had no problem. I had some mistakes with what is called a bad pool header, I've not experienced this once again. My main problem is with the sleep and hibernation. I went and disabled any parameter that would be extended automatically to my computer after a short period of time. It is set at only hibernate after like five hours, I'm never away from him that long. I don't want it to hibernate unless I put it specifically put into hibernation. I heard talking about hibernation is hard on your computer. I am usually only away from him for a couple of hours, so it's easier to have it in sleep so I can come back and get the right to return to work or what I was doing. I put it in mode 'sleep' whenever I need to go away for a few hours, for some time, I had no problem, he would go to the mode standby and stay there until I woke it. My problem is that most of the time when I put it in fashion watches, it goes to the hibernate after only a few minutes. WHY would he do that? And how can I stop it? There are times that I put him to sleep and he done as it should. Most of the time, but it goes to the hibernate after a few minutes. I don't want to make this period. Is there a setting I'm missing, I have conflicting settings on something? What is a small problem with Windows 8, or with my computer itself? The last thing I want to do is to restore it to factory settings and lost all the things that I have saved and have to reinstall my programs again.

  There is also something else showing in my event viewer I've ever seen before. That means when he says "system timer was triggered." And can someone tell me what means the bad pool header error and how to fix it?

  I found a solution, I noticed when I Hibernate the computer at night to go to bed is when it remains not in mode 'sleep'. I stopped it in hibernation at all now and it says in the mode "sleep" very well.

• Portege z830-11J - Windows 8 - resume/sleep problems

  Toshiba, help Windows 8 problems with old laptops and Windows 7 computers.
  The problems seem to be hardware related, but I have to contact microsoft.

  Schould where can I go for Windows 8 curriculum vitae/sleep problems with this laptop.
  contact microsoft support would be useful?

  Thank you

  Jürgen

  Hi Jürgen

  I don t think that Microsoft would be able to help you usually the laptop manufacturers are responsible for own products

  If you have any problems regarding the features of the laptop, you will need to contact the maintainer authorized Toshiba in your additional countries, you can call the hotline of Toshiba.

  You can also ask the here community of users for some advice, assistance, etc.

  This Z830-11J is certainly win 8 supported as you can see here the model number in the Win 8 compatibility matrix: http://eu.computers.toshiba-europe.com/innovation/jsp/checkWindows8Compatible.do?service=EU

• Laptop started having problems connecting to internet connections Wi - Fi

  in recent weeks my laptop new (6 months) started having problems connecting to wireless devices after spending hours ranging from hollow forums, check the settings in device etc, computer managers them laptop turns off, restarts said there was a problem that caused the laptop to the stop and then when it restarts it connects to the wireless device fine. If I stop back on the laptop, the problem when I turn it on.

  Not only it will pick up my wireless network, it says no wireless networks found despite her grateful normally about 15 other wireless connections, that my neighbors.

  Does anyone have a solution in the long term to this problem. I am a student and spent more than 3 hours trying to fix today and I don't have the time to deal with this all day.

  Thanks in advance

  > in the last few weeks my laptop new (6 months) started having problems connecting to wireless devices
  Have you changed some settings or perhaps updated driver WLAN? I mean, I can't imagine that problems start without reason.
  It is not easy to say what may be the problem. Perhaps, you must reinstall the recovery image and test the feature with the factory settings.

• HP n278tx do not hibernate and sleep in point 8.1 of Windows + impossible to install the chipset Drivers sp63967 &amp; sp63966

  I have HP n278tx laptop and I recently installed Windows OS 8.1 and now I can not hibernate and sleep my knees.

  When I do that it get stuck.

  And also I can't install drivers chipset provided by HP to Win 8.1 Pro.

  I can not install these 2 drivers. Please help me.

  

  You are the very welcome.

  The reason why you can not put the laptop to sleep or into hibernation is because you need to install the NVidia graphics driver too what this hardware ID.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133679-1&cc=us&DLC=en&LC=en&OS=4158&product=6967644&sw_lang=

  I don't understand why it not install this driver.

  The only other suggestion I can offer is to see if Windows Update installs the driver.

  Go through the manual steps that above, but this time be connected to the internet, then select the method of automatic update .

  See if windows update detects and installs the Intel Management Engine driver.

• Start Menu problem - another file opens when I select a file to open in the start menu

  original title: Start Menu problem

  I use windows Vista Home Edition.  The start menu is in Vista Mode.  When I select a file the third file above that that I select opens.  In classic mode, it works fine.  How can I fix it?

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  This looks like a problem with Windows Aero, I would say that you update the card drivers video from the manufacturer's website and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  You can navigate on troubleshooting Aero:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

• HP Pavilion p7-1451: when I try to start my hp Pavilion p7-1451 from a USB I just get the HP Logo

  Recently, I upgraded my OS to Windows 10 and follow the procedure to create a system backup and recover and restore the Flash Drive. When I try to start my HP Pavilion p7-1451 from a USB I just get the HP Logo. Do I need to change the settings on the HP?

  Use the esc key when you see the HP logo, it should give you a list of startup, and then press F9 to get a list of boot devices, then choose your USB key from this list and press ENTER.

• Start-up problems: Windows Vista

  My mother has a Sony Vaio VGN NR430E; a few months ago she started having problems with the start up. His laptop keeps restarting until it had a chance to take charge of the user. It allows you to choose different options such as safe mode and last good known configuration, just start to name a few, however is not a difference that one you choose because the end result is the same which is: it restarts; before you restart, you see a blue screen, but only in a fraction of a second and then it starts again. I want to format it, but she didn't burn the recovery disks. How would I be able to solve this problem?

  If no one responds to you:

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can try this:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner