hibernates immediately after starting

I made a few changes on the backup settings of my UPC on the hibernate after a power failure. After my next starup sys goes into hiber too fast so that I can't put back it. So now it comes cycles. Unable to get into safe mode to correct this. I am now in operation off a clone HDD that is my backup but is back on the other HD update. Can connect only the HD as a slave and change the settings, I don't know how to do this. If only I could get into restore using my windows CD? Help please.

I do not know and can not easily test but if you have a UPS connected via a serial cable and the inverter XP Service is somehow thinking that he must immediately be put into hibernation or shut down your system, you could put all your stuff together and turn off the UPS Service (or any Service) of the XP Recovery Console , then reboot without the UPS activation Service, then fix it.

I think it works if the UPS Service is contributing to your problem.

Here is a list of the XP Recovery Console commands:

http://support.Microsoft.com/kb/314058

Once in the Recovery Console, you must type this command to turn off the UPS Service:

turn off the UPS

Then, remove the bootable CD and type "exit" to restart your system.

You have a bootable XP installation CD authentic where you can start in the XP Recovery Console, or you need to make a CD of bootable XP Recovery Console?

Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Tags: Windows

Similar Questions

  • WiFi connects immediately after starting

    Hello community,

    I started having Wifi issues after installation LittleSnitch. It would be irrelevant, but that's when the problem appeared. Although I have already removed, the Wifi connection does not seem to operate normally.

    Before that, it would connect immediately after starting, which means instant access to Chrome or any other browser.

    Now, he continues the search for a few seconds, shows an exclamation point on the wifi icon and then finally connects to my network. This process takes more than 30 seconds.

    I tried several solutions spare, change my location, manual settings, DHCP or DNS, wifi diagnostics, reset my router, but all without success. I still can't get it to connect at the same time.

    Any ideas?

    (El capitan)

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • Crashing immediately after starting

    Hello

    My computer crashes immediately after start upward. Sometimes I have the chance to actually click on something, but usually it will freeze just upward before I can do anything whatsoever. I'm running it in SafeMode right now and it works completely fine. Any ideas on what I can do?

    Follow these steps to exclude material failures.
     
    Type of memory in the start search box, and choose Diagnostic memory. This will
    take a few minutes.
     
    In computer discs right click and choose Properties, then the Tools tab.
    then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
    from one day to the next.
     
    After running chkdsk (what does the foregoing) checks file
    corruption by clicking on Start - Programs - Accessories - right click
    Command prompt and choose Run as administrator. Type
     
    sfc/scannow
     
    You can clean clean boot
    http://support.Microsoft.com/kb/331796
     
     
    --
    ..
    --
    "Casey Polon" wrote in message news: ee0fe058-d881-40f3-a9ef-c2c0ae5d0936...
    > Hello,
    >
    > My computer crashes immediately after start upward. Sometimes, I had the chance
    > actually click on anything, but more often it just freeze before
    > I can do anything. I'm running it in safe mode now and it works
    > quite well. Any ideas on what I can do?
    >
     
     
  • HP Envy 15-j119so: Envy 15-j119so stops immediately after starting

    My 7 month specifications stops immediately after startup. Briefly, it shows the start screen with the message "to initiate the automatic repair" before to stop completely. The laptop is brand new and I have not experienced problems before today.

    Would it be a virus or a motherboard problem? In any case, if you can help, let me know!

    Thanks in advance.

    Sounds like a hard drive problem possible. Have you tested with the F2 System Diagnostics? Immediately after switching on at startup by pressing the ESC key. A menu opens where F2 is an option. Press F2.

    You are still under warranty. HP support a call.

    If you live in the United States / CA, coordinated HP here.

  • Scheduled task (dba_job) running immediately after starting

    Hello


    Clone of post a scheduled task (dba_job) runs immediately after startup. This task must be performed only in Production - not in the test environment.


    I know that we can stop the task to run using exec dbms_job.broken (42, TRUE), but to do this, I have to start the database.

    The job runs as soon as I start the database. This creates problems.


    Could someone help to prevent the execution of this work.


    Thank you
    Prasad Arava

    JOB_QUEUE_PROCESSES = 0

  • Audition CS5.5 crashes immediately after starting.

    Hello

    I'm under hearing on a MacBook Pro Version 10.6.6 - immediately after the start of attempt and I get a message informing me that the app has left unexpectedly. I try to reopen the application, but in vain. Any suggestions?

    Rename the folder to something else (for example, "4.0_backup").   This will simulate the compensation of your preferences

    ~/Library/preferences/Adobe/Audition/4.0

    Launch and then after that hearing is in the "Hearing Log.txt" file that is created in the new 4.0 file that will create the next time you start hearing.

    You also don't mention if this has always happened since you've installed and activated the product, or if it started after something else.

  • the voice on the recording stops immediately after starting

    Hello

    I am a novice user of Premiere Pro.  I just started working with voice recording.  I did the whole upward as I understand it.  When I start recording, he immediately "finished" and stop recording, as if the record button is not "switched" on.

    Here's a clip showing my problem, I hope it's clear.

    0113.02.premiere pro troubleshooting. VoiceOver finishing immediately on Vimeo

    Thank you in advance,

    Travis

    The Voice over function looks like the faster and easier.

    Well, as you have now done using a Zoom, I'm not sure that this is the case.

  • Photoshop crashes immediately after starting

    Downloaded Photoshop, program starts, then shortly after the initial home screen presents the program crashes.

    Have uninstalled and reinstalled and rebooted the computer, no effect.

    Win 7 Home Premium SP 1, 8 GB Ram, i5, running

    Have Muse and Lightroom installed, both will work perfectly.

    Go to site AMD make sure you that you have the latest device driver for your installed AMD/ATI video card

  • Skype crashes immediately after starting

    Skype worked fine until that earlier. Now, whenever I run Skype, it would Flash the screen for a second before they go. It also adds its icon in the field of acticity, but when I try to right-click the icon he disappers. I tried uninstalling and reinstalling, deleting the history, but nothing seems to work. Help please,

    There are no physical webcam connected to your computer, while several virtual video sources are.

    Uninstall the camera [JPEG/MJPEG] IP and virtual camera Dxtory video applications. These applications are known to conflict with the latest versions of Skype.

    Another solution is to force Skype not use any source Video Capture. This can be done by editing the shared.xml file:

    http://community.Skype.com/T5/Windows-desktop-client/Skype-uses-DVB-T-card-as-camera/m-p/1445497#M12...

  • How to set up the domain user to log on automatically immediately after starting?

    We have a Windows XP development computer that we setup so that only the user DEV can connect.   So, I would like to set up the computer so that when it is initialized, it connects automatically to our DEV user directly on the desktop.  How can I do?

    Hello

    Thank you for visiting the Microsoft answers community site. The question you have posted is related to telephone service and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you

    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

    I hope this helps.

  • I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

    I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

    Hello Varshil07,

    Thank you for using communities of Apple Support.

    If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

    1. Choose the Apple menu > shut down.

    2. After your Mac stops, wait 10 seconds, then press the power button.

    3. As soon as you hear the startup tone, hold down the SHIFT key.

      You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

    4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

    To exit safe mode, restart your Mac, but no press during the startup.

    OS X El Capitan: start in safe mode

    Have a good.

  • HP10 1901 Tablet: Tablet 10 1901 hp stops immediately after the start, despite the load fully

    Hello

    My hp 10 Tablet has less than two years, and I don't use much.  The problem started with the volume suddenly down to zero out of control, and even if I press the volume up button, the volume is just down once again, when I let the button.  And then the Tablet has started to close automatically, even when it has a lot of power left, as more than 50%.  Now, even if I have fully charged, when I press the power, immediately after the start, it says, 'stop' and he just stops.  I try to turn it on again, and the same story is repeated.  I'm just fet upward.  What is a mechanical problem or a software problem?  I don't understand.  Please help me.

    Hello and welcome to the HP support community!

    It is difficult on this side of the screen of remote diagnosis your problems!

    You should try to eliminate the causes of the problem.  Only thing we recommend is to first try a Factory Reset.  It recharges a clean copy of the OS.  If she solves problems, then you're done!

    If problems persist or get worse, then it is probably related to the material.  Damaged the volume button, USB port, due to lack of battery, etc.

    Perform a factory reset on your tablet.

    WyreNut

  • My PC starts immediately after stopping off for a considerable time

    My new PC will not start immediately after the power supply is cut off for several hours. However, it starts up after several minutes of trying. Is this a problem related to the power supply or other materials? I assembled just this new pc, and before that, it never happened. Here are the specs of my pc:

    GX650 Bronze PSU CoolerMaster; Processor Intel i5 2320; Intel DH67CL mobo. 6750 2 GB DDR3 graphics card Sapphire; 2 x 4 GB Corsair RAM; Kingston 64 GB SSD; WD 1 TB HARD drive; ASUS DVDRW
    My PC is connected to the mains through an inverter 600w APC.
    Is it possible that it could also because of the connection of power supply of the pc case itself? For the record, the case is an old one that has experienced a recent surge that destroyed my previous mobo and basically almost everything in it.

    Hi wannmann

    These forums focus on Microsoft software.

    Your best resource for the problem you describe would be the motherboard support forums. Here is a link for your convenience.

    Support of Intel communities:
    http://communities.Intel.com/Community/Tech

    Concerning

  • Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

    Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

    Hello

    1. What is the security update article?
    2. are there any other security software installed on your computer?

    If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

    Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    See also:

    The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

  • MU computer stops immediately after the start-up or attempts repeated; So sometimes minutes after;

    The computer stops immediately after the start, repeatedly or a few minutes after have managed to start it. The error log showed two evenys:

    (1) the service Acquisition of Image Windows (WIA) suspended at startup; (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM within the required time.  After restarting the computer, and after installing all of the updates, I installed the last printer; I unplugged the printer and the computer booted immediately!  Does anyone have suggestions, and if I have to update the drivers (hp Laser jet 5 p & hp scanjet 5370C;) How? Please help, frustration to a max; Thank you very much; HeinrichDS

    HeinrichDS

    Recommendation of the Palcouk of sense what is the operating system and is worth a try.  If you're still having problems, then you need to talk to specialists in XP (because it is a Forum for Vista).  In this case, please transfer your question in the Forums of XP to http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Warranty repair period

    Hello I had a repair under warranty made to my Satellite P10 earlier this year, and the problem was diagnosed as a failure of keyboard and the keyboard replaced. The problem has now re-appeard but the laptop is beyond its 1 year warranty by a couple

  • Why can't I see the pre-recorded videos of TV via the media library?

    When I open the Windows Media Center on my new Toshiba laptop, that I go as far as to check the recorded TV shows. I can click on the thumbnails, but the videos won't play.I get an error message on videos that I tried that says there is a problem vie

  • HP Pavilion dv7 Notebook PC: IDT HD Audio Drivers w / Beats - reinstall

    I've had my laptop HP refurbished for a couple of years now, and it was working fine, no problems at all. Then, one night a few months previously, the audio literally clicked and stopped working. I was able to reactivate it with a driver that I found

  • D110 HP prints a status report

    Hello users of Hp and staff. I am having trouble with my HP Printer D110a. The problem I encounter is that it simply does not print, anything. Pinter turns correctly, through the normal initialization. The display ends at the normal home screen. When

  • Error CRADSDatabase for blackBerry Smartphones

    I just downloaded and installed the latest version of the desktop software.  When I tried to sync with my blackberry, I got the error... ERROR CRADSDatabasec:\Users\etc etc\SyncSDK.209.601\Translators\RimBB\Contract{8BDD6D4754404DBF87C89869655DE48}.a