Hibernation and Novatel Wireless Mobilink - Portege M700

Similar Questions

• 3g modem failure internal Portege R500 Novatel wireless

  Hello

  I have a toshiba portege r500 with windows vista business sp2.

  Since last Saturday I am unable to make a connection through the modem 3g internal 3g.

  When I open novatel wireless mobilink, he said on the radio switch sense wwan is off, however, it is not off. I can connect to the thin wireless networks.

  Toshiba broadband 3g HSDPA sm - bus modem minicards is declared as normall work in Device Manager.

  all the drivers are updated to the latest drivers. no change. Unable to use the 3g modem.

  nvtl phoenix mfc application stops working that looks like a problem of modem again.

  can someone tell what to do please?

  Did you installed the 3 G RF power control utility?

• Portege M700 searching for Mobilink ConManager be used with Windows 7

  Hello

  I upgraded a Portege M700 Notebook Vista (of recovery) for Windows 7 (32 bit). Most of the devices and drivers where found and assigned automatically in the installation process, some more later with the Toshiba/Microsoft software updates. Also the driver for the Modem 3 G integrated has been installed and says "working properly".

  Feature: "SM Bus Toshiba broadband (3G HSDPA) minicards Modem.
  Pilot: "Novatel Wireless Inc." / version 3.0.0.3 / Date 14.09.2006 (signed by Microsoft)

  But I can't find software for Windows 7 to make use of the modem (establishing a connection)
  Formerly "Mobilink connection manager' does not show upward in the Toshiba download page (Windows 7) and the old version (VISTA) does not (stops without error message installation procedure).

  Y at - it no hint how to establish a connection 3G with the M700 (Win7) or a link to a working version of the Mobilink for Win7 connection manager?

  Thanks in advance...
  Peter

  Post edited by: Riedel

  Hello peter

  You have upgraded to Vista preinstalled or you have installed your own own Win7?

• Portege M700 and Windows 7

  Hi all

  I installed Windows 7 RC on my Portege M700, and everything was fine, except:

  -Intel(r) Management Engine Interface (show on the device as a PCI Simple Communications controller Manager);
  -Novatel Mobilink to the Novatel Wireless Broadband (3G HSDPA) SM-Bus minicards Modem integrated (EU870D) (list on the device as 4 Interfaces of data manager).

  I used the drivers on Windows 7
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1927814& rpn = PPM70U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768662 and all fine wenf.

  I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager.
  But when I try to install the v2.02.27 from Novatel MobiLink available [here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=2 & selFamily = 4 & selSeries = 157 & selProduct = 773 & selShort Mod = 684 & language = 13 & selOS = 26 & selType = all & yearuploa d = & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = 8 & page = 2 & startPage = 1] he justs roles back the instalation before it's over.

  Do you know if toshiba plans to deliver a version of Mobilink from Novatel compatible with Windows 7?
  And what of the Intel(r) Management Engine Interface? There will also be a compatible version?

  Thanks in advance guys...

  Hello

  > I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager. But when I try to install the v2.02.27 from Novatel MobiLink available only here it justs roles back the instalation before it's over.

  The point is that you tried to install the driver on Win 7 OS Vista and this could be the problem. Seems the Vista driver is not supported with Win 7.
  Of course, some drivers Vista would go with Win 7 but not all drivers are compatible.

  I think you have to wait until the drivers Win 7 for the 3G module would appear.

• Portege M700 - Modem UMTS Novatell missing drivers for Vista 64 bit

  Hello

  are there drivers for the UMTS modem yet? (I have found that none on the Toshiba download site) It's the only thing that prevents me from using a Version of Vista 64 bit on my Portege M700.

  Could you (guys from Toshiba) please release the 64 bit Vista for the Novatel UMTS modem drivers?

  Thanks in advance,

  Matthias

  Hello

  You are right. Novatel Wireless Mobile Broadband Drivers and TOSHIBA 3 G RF Power Control Utility are not available, but maybe you can check if Vista 64 - bit DVD recovery exist for this model of laptop.
  Check it out under the https://backupmedia.toshiba.eu/landing.aspx

• Portege M700 Wacom does not respond after hibernation

  I've been using the M700 for two months and I met a very annoying bug. It is not mentioned in this forum so far, but there are other reports on the Internet who mention this problem too. (http://forum.tabletpcreview.com/showthread.php?t=16902)

  * Question: *.

  Tablet is placed in hibernation. When he wakes up, everything seems OK. When you use the stylus or the key functions, that the cursor does not move. Tablet and pen services have not crushed, but there is no link between screen/digitizer and software.

  + Technical support +.
  The series/USB connector is not reset after waking or hibernation is dead the serial connection

  * I tried solutions *.
  So far, I have reinstalled Vista, tried XP (and will stick to it because it's a better OS in many cases) and have reinstalled all kinds of drivers Wacom.

  * What we want *.
  Wacom has also seems to be aware of the problem but says it's a matter of Toshiba. I am impressed with the construction and the quality of the M700 (it is a replacement for my robust but now almost unusable M200 and I have a M400 too, but I never liked it) and this issue is the only glitch I meet.
  I would like to know if anyone else in this forum has experienced a Wacom-coma after the resumption of the hibernation or standby, and if so, if they have found a solution (apart from restarting their PC)

  And I would really like a response from a representative of Toshiba review of this question.

  Hey Buddy

  I m not a M700 owner and, therefore, I can not say much about this issue, but to my knowledge, there are a few different problems with Vista and hibernation mode.
  For example, device high definition audio, screen WLan failed after the resumption of hibernation.
  These issues were definitely Vista problems.

  Installed on Portege M700 Tablet d River was developed by Wacom, I wonder why the guy States that it is a Toshiba issue?  :| (perhaps because this Toshiba laptop s ;)))

  Anyway, you said that you have reinstalled the driver for the tablet of the Toshiba page and updated the Vista of the State. Check the BIOS updated maybe he could improve the functionality

  If this does not work I recommend you contact the ASP to find out if there is a known issue

• Portege M700 - 3 G-connection via Novatel & T-Mobile

  Hello
  My M700 is around the age of 12 months and now I tried to connect via a 3G connection to the internet. The build-in 3G connection manager Novatel (called MobiLink) offers 3 pre-installed configurations, none of them work for my T-Mobile SIM card.

  I can't find any clues (Toshiba or Novatel or T-Mobile) how to set up a working connection. I try to create a new profile, but have no idea on demand "APN:" or other necessary parameters.

  Is there anyone with experience on these issues with a useful suggestion?
  I know that my T-Mobile card user-number and the ANKLE associated with the SIM card.

  Thanks in advance,
  Peter

  Hi Riedel,

  If I were you I talk with T-Mobile and ask what APN you should use. A digital CAMERA is basically a string that you enter to dictate the software to connect to (e.g. TMobile), T-Mobile will be able to tell you what APN you must try to connect to usually.

  Good luck

  Paul2008.

• Portege M700, Windows 7 and touch screen

  The Portege M700 was feature touch screen before I upgraded Vista to Windows 7. Now it does not, any more than the features of two fingers that W7 is supposed to offer. Any ideas on how to recover the touch screen feature?

  Hello

  I think that you need to install the driver for the Wacom tablet.
  The driver is placed on the page of the European driver Toshiba
  The WACOM Dual Touch driver for the integrated tablet is required to use the features of the tablet.

  There is also the Extension of Tablet PC Package.
  This package installs a range of important public services.
  Utility _TOSHIBA of rotation: _ define the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.
  _TOSHIBA tablet PC buttons driver: _ you can dedicate tablet buttons to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.
  _TOSHIBA accelerometer utilities: _ these utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction.

  But all of these tools are released for Vista when perhaps they will work with Win 7 too check it!

• Portege M700 - 4 devices called Data Interface in the Device Manager

  I am facing a problem with the toshiba portege m700.
  In Device Manager, I have 4 devices called Data Interface.

  I completely wiped the hard drive and formatted in ntfs.
  Then installed Windows Vista 32-bit and installed all the drivers available on the toshiba site, but I find myself with four instances of data Interface in other devices in Device Manager.

  Can anyone help?

  Hardware ID data interface:

  USB\VID_0930 & PID_1302 & REV_0000 & MI_00

  USB\VID_0930 & PID_1302 & MI_00

  Have you installed the O2Micro smart card reader? O2Micro Smart Card Reader which allows you to authenticate on your computer with a smart card and a PIN code.

  In addition, you should check if the Wireless Mobile Broadband of Novatel has been installed too!

• I am looking for a card PCI UMTS for Portege M700

  First of all Hi everyone, as above mentioned in the title is on the Portege M700, I am looking for a card PCI UMTS for this model have here an 8775 Sierra lying around, but unfortunately, it is not recognized in Win7, I can time can someone tell what card for this laptop is, or even something where I could get so...?

  Thank you apologize in advance

  Hello

  You need a module 3G Broadband?

  As far as I know that some of the Portege M700 series were equipped with the 3G module I think that it s of Novatel but I m not sure leave

  However, if you need a framework for the Toshiba notebook that would be consistent for sure, the best place for the purchase of these parts is your ASP.

  Guys could check what parts are compatible and could order from Toshiba if that would be really necessary

  Welcome them

• FN + F8 does not work which allows the Wan on Portege M700

  Hi all

  On my Portege M700 (Vista), I can see that by pressing FN + F8 should scroll through the devices and activate the internal device of WAN (HSDPA).

  But it doesn't seem to do anything.

  What could I do wrong here?

  Hello

  As far as I know that some models are equipped with the Wireless WAN functions.
  Did you buy the m700 with WAN functionality?

  Usually the WAN indicator lights or flashes blue when the Wireless WAN function is activated.
  The indicator will light up or blink to indicate the status of the connection to the WAN service.

  But note!
  The WAN card must be installed to use this feature. Some models are equipped with such a card, but NOT all!

• "Insert system disk" message at boot Portege M700

  Hi all

  my friend give me his old toshiba Portege M700 and I have a problem with it.

  When he starts just shows toshiba logo and then it "Please insert system disk and press any key when ready.

  I do not have any disk where can I download the iso and then burn it to disc or something like that, I don't know really much about PCs and sorry for my bad English, please help me if someone can

  Thank you very much

  Hello

  Unfortunately, it is not possible to download the image of Toshiba.
  Where you n t have recovery disc for your model mobile, visit this page to order this disc: http://backupmedia.toshiba.eu/landing.aspx
  But I don't very well if you'll be able to order the disc because of the age of the laptop of m

  However, the message: insert the disk system is displayed because the system is not installed on the Toshiba Portege laptop, that's why it asks for the disc.

  Of course, you can use the clean Microsoft Windows disk to install the system, the essential drivers are available on the page of the driver Toshiba UE Toshiba image is not necessary to reinstall the system, if you are the owner of a MS Windows disc

• Re: No display on Portege M700

  Hello

  My son put his computer bag stuffed with his laptop Toshiba Portege M700 inside his office (just out of warranty).

  The laptop shows no sign of injury, but on turn it only "all the right noises", but there is no display on the screen. If the laptop is turned on with the charger connected and then some colored vertical bars appear, and then they fill with white, but nothing else.

  We tried to connect an external monitor and pressing Fn + F5 and the vertical bars disappear from the internal screen and it goes totally black, but nothing appears on the external monitor. Pressing Fn + F5 new returns the vertical lines at random on the internal display.

  We have also tried to start the laptop in the Mode menu without failure by pressing F8 during the initialization of the laptop, with or without an external monitor, with or without the Fn + F5, but you cannot get any video on the monitor either internal or external.

  Fact it seems that maybe a connector was dislodged by the shock of the fall, that you think that the laptop is now pushing up daisies?

  Any notice received with gratitude.

  WIBs

  To be honest I n don't know which connector you want to say but there is no pic on external displays to be a serious problem.
  It seems impossible to send the video signal via the video out port.

  It is not easy to offer an accurate diagnosis on this virtual path.
  What do you do now? Try to repair it or what?

  Maybe you should contact Toshiba service and ask for verification. They can run diagnostic tools and tell you what is defective, what needs to be replaced and how much it will be cool. Then you can do what to make the decision.

• Re: Portege M700 - download link for the BIOS does not

  Tried to download the file to update the BIOS for Portege M700 on the Toshiba site with no luck. The file is 1: 60 - WIN. No luck. Is the link down or something? Could someone please try?

  Hello!

  I agree with zuja.
  I tried to download the BIOS for Portege M700 and now it works.

  Now you can update the BIOS. :)

  Good bye

• TrueSuite Access Manager on Portege M700 - 13p

  Whenever I start my new Portege M700 this program says that the drivers are not installed for the fingerprint reader and t testing install again. Install TrueSuite Access Manager starts and then it asks me to restart my PC. Every time. I'm currently ignoring this but it bothers me.

  I can connect with the fingerprint reader, which suggests that the message is bogus.

  Recommend a way to solve this problem?

  I'm tempted to remove the device from the hardware Manager and uninstall the software, then restart, reinstall the software and then redetect the hardware...

  Anyone got a better idea before that I'm wasting my time?

  See you soon,.

  Rob.

  I agree with you and I think that the first step, you can try to remove preinstalled software and install the latest version of the Toshiba support page.