Hibernation and standby options disappeared.

Similar Questions

• 'regional and language options' disappeared

  "Regional and language options" has disappeared from the control panel. How can I get it back?

  Thanks for the suggestion. He did not, but putting a new copy of the intl.cpl in windows\system32.

• Satellite P - How to disable hibernation and standby?

  I put the configuration of power to say never Hibernate and standby - both occur.
  What I am doing wrong?

  I'd be happy with sleep but don't want to Hibernate!

  Hi g p allison,

  You set these parameters of current power profile?

  For example, if you disable the standby and Hibernate to profile high power Performance, but you use or switch to balanced labour settings don t.

  In order to verify if they are disabled in all profiles of power!

• W500 freezes during hibernation and standby

  I have a W500 with XP Pro. Not so long ago, it started to freeze during hibernation and the day before.

  Any ideas? Thank you!

  I made a number of updates and I suspect it is the Bluetooth driver that does not allow to happen.

  It seems to be ok now.

  Thank you all for the replies!

• Why my regional and Language Options disappear and the language settings in Windows Live is in its place?

  Some time ago I remember Panel\Clock change of control options, language and Region\Regional and Language Options to view the applications that I installed in another language.

  But now, it seems to me that the "Regional and Language Options" link that was there is gone and has been replaced by "Windows Live Language Setting".
  I'm confused. What actually happened? How to correct this so that I can change my options of language as before?

  Hello

  As a work around, I suggest you perform a system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  See also: http://windows.microsoft.com/en-US/windows-vista/Change-the-display-language

• Hibernation and standby disappear after replacing hard drive

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: recently replaced a hard drive to 120 GB (IDE) with a 1 TB drive (SATA) on an E-Machines T-3516 under Windows XP SP3.  Lost my hibernation functions and the day before. Tried to determine if support system put into hibernation using the command instructions powercfg / has.  He said hibernation is not supported.  But the system used to support the hibernation before the swap disk.  The only material that I've changed is the hard drive.  Any ideas what has changed and how do I get hibenation/standby?  Thanks in advance.   Steve :-)

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  When you replaced your hard drive you reinstall your video driver? Check your device for red or yellow symbol Manager. You could be on the VGA mode. If you need to install the driver go to the manufacturer's Web site and download the latest version of the Vista-specific driver.

  How to disable and re-enable hibernation on a computer that is running Windows

  http://support.Microsoft.com/kb/920730

  To allow the Hibernate, follow these steps:

  1. Click Startand type cmd in the box start the search .
  2. In the search results list, right-click guest, and then clickrun as administrator.
  3. When you are prompted by user account control, click continue.
  4. At the command prompt, type powercfg.exe / hibernate on and then press ENTER.
  5. Type exit and press ENTER to close the command prompt window

  I hope I could help

• Hibernate and standby options does not not on Satellite P200D

  Hi, I have a P200D with XP (he had originally Vista but I took the decision to use the reliable XP instead of Vista to baby)
  Anyone know how to enable hibernation options and the day before? They went gray and I really need these options.
  Thank you

  Hello

  The same notebook here! Can you please tell me what display driver you have installed? I tried to install Windows XP Home edition on mine a few months ago, but I wasn't able to find the right display driver.
  As far as I know after the right display driver installation the sleep option should be available.

• Hibernation and standby on the laptop no longer works

  All of a sudden, I can't put my computer laptop (Dell XPS M1530, Vista Ultimate) to Hibernate or sleep more. When I click on start, then on Hibernate or standby, the computer goes to sleep or in the State of hibernation for a few seconds and then wakes up again. He has worked for years, and I wouldn't change a thing. I also tried to use the power button, but it does not work either.

  Help!

  Hello CHRISTAPOLKINHORN,

  Thanks for the return of the response.  Disable you the ability of the USB device to wake the computer?  You have all the USB devices connected to your computer?

  Please let us know status.

  1. Click Start
     Collapse this includes this image

     

     right click on computerand then click Manage.

  2. In the user account control dialog box, click continue.
     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3. Click on Device Manager, expand Bus USB controllers, right click on the device, and then click Properties.
  4. Click the power management tab, clear the allow this device to wake the computer check box, and then click OK.

  Note We recommend that you use the first solution because it preserves the wake functionality. When you use the second workaround, USB devices cannot wake the computer. In addition, the power button on remote control for an IR of Windows Media Center Receiver cannot wake the computer.

• Hibernation and standby

  Hello
  I have a thinkpad T43 with XP SP2. We had to reformat some time back. I have rebooted since all drivers Lenovo page Power Mgmt, but when I go into the power manager, it wont let me enable "hibernate". Any ideas why this could be?

  John

  Thank you. The link mentioned Microsoft updates to driver, the driver VGA "skeleton" specifiaclly Several updates, a few hours and about 250 m from the drivers later now, I have standby and hibernation.
  Thanks to everyone who helped me!

  John

• of standby option not on shutdown

  sleep option does not appear when I turn off computer

  Hello

  ·        Have you been able to use the option on the system before eve?

  ·        Remember to make changes to the system?

  ·        What is the model of the graphics card and who is the manufacturer?

  ·        You have installed the latest drivers for the graphics card on the system driver?

  Method 1:

  If you have not installed the drivers for the graphics card then, I suggest to update the driver for the graphics card on the system and check if the problem is resolved.

  Method 2:

  I suggest to update the drivers for the chipset for the system and check if the problem is resolved.

  Method 3:

  Apart from that, I suggest you to verify if the standby option is enabled in the option to power on the system. I suggest you follow the steps mentioned in the article below.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• M70-160: don't wake up from hibernation or standby - hardware or software?

  I just maaaaaan!

  works fine, but will not wake up from hibernation or 5000mAh! unless you're going to wait a while! 15 min or something like that!
  After that he's going to wake up and work normally.

  I thought that it is overheating problem but now just turn it on and when the toshiba logo appear if you turn it off, it works again, but after 15 min it will BE!
  This isn't a problem of heating!

  She does this even without HD top!
  at first, it was the hibernation and standby problem, now it dose the same with stop!

  what I can do!

  I bought just the guys! ASP is now a way!
  is there anyway that I can do to fix this!
  I have difficulty PCs a lot, but not books!

  Hello

  You can also contact your local Distributor and check with him. They also have enough experience. On this path, it is not easy to tell exactly what is happening.

  Is the unit preloaded with recovery media or with your own operating system?

• Game are performed very slowly and without standby option

  I have HP nr 15-R007TX-G8D31PA #ACJ

  I installed win pro 8.1 on my laptop and installed NVIDIA graphics card also always there is no standby option (hibernating) available and when I play games it run very slowly and graphics are not as good

  Please help me with this problem

  @Vashu23

  These pages can help with your sleep/hibernation problems, the first is HP and the second is to WindowsEightForums:

  Sleep and Hibernate in Windows 8, issues troubleshooting

  Power Menu Options - Add or remove a standby or Hibernate in Windows 8

  Also, here are a few tweaks that you can watch in windows 8, which can be useful for performance.

  Set the performance of the slow system (Windows 8)

  Also you can watch latency spikes. Essentially, it is an application, driver, or a combination that will push the CPU to its limits and so your system will have spikes where the transformer is overloaded. Requests will be have lag or stop responding, audio or video will pause or break up.
  
  I found the following page on Sysnative that addresses this problem very well, with lots of graphics and links to Microsoft support pages. It will help you to isolate the cause.
  How to diagnose and solve the problems of high latency DPC with WPA (Windows Vista/7/8)
  
  If you need a tool to check latency, you can get one from TheSycon here page:
  DPC latency Checker

• Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

  Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

  Thanks for your time

  Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  

• Type of swatch InDesign CC disappear of display and background options

  According to the title. can someone help me? its very difficult when im on 100 on color chart and I way cant that is RGB, CMYK, PANTONE, SPOT. and background options have disappeared, only the cc Library button is on the left.

  

  Try to restore your InDesign preferences:

  Garbage, replace, reset or restore the application's preferences

• With photoshop 2014 cc 2.0 in edit, fill, pattern, script, I get only 6 options. Trees and executives have disappeared.

  With photoshop 2014 cc 2.0 in edit, fill, pattern, script, I get only 6 options. Trees and executives have disappeared and I only get the filling of symmetry, filling of brick, cross weave, place along the path, random fill and spiral. This is normal or is my corrupted photoshop version?

  options are passed to the FILTER - RENDERED