Hibernation / standby works on Equium A100-147

Similar Questions

• Adapter part 3 will be work with Equium A100-147

  Hey,.

  the charger for my laptop has just totally broken, cannot be fixed.
  I just bought then produced "give power adapter for laptop with USB power Port.
  It says its compatible with Toshiba, but I was wondering if it worked with the satellite A100-147.

  Any help would be great cos I must take back or open it, he can't go back after opening.

  Thank you

  Hello

  I don t know if this 3rd party adapter is compatible with your laptop, but I know that the Equium A100 needs adapter that supports 15V 6a 90W and this E/PA2521U-2ACA AC adapter would be compatible and supported by this specification.

  Good bye

• Display/set Standby request extended Equium A100-147

  Sometimes, but not always, when I put my Equium A100 in hibernation, when I woke up it upwards again once the display fails to come back and I need to restart the computer in pressing and holding the power button and through a full reboot.

  Y at - it a setting I need to change? I put the Hibernate in Windows and Toshiba Power Saver Settings.
  Thank you in advance.
  Allan

  What display driver update? Have you checked this possibility?
  Try visiting the European driver Toshiba page and check the updates

• Media Center does not work on Equium A100-147

  Hello
  I have a little problem with my media center. It used to work fine, but recently, I decided to wipe the hard drive.

  I used the boot disk to reinstall windows media center edition 2005. However, when you try to load the Media Center, I get the error message:
  "Your video card or drivers are not compatible with Media Center" and it will not play videos when media center then opens upward.

  Now, I downloaded all the updates that are available from microsoft for windows and I ve downloaded the latest drivers from Intel for the graphic accelerator card.
  I am really at my wits end, Ive used this microsoft program to detect the decoder and it is both compatible with windows media player and windows media center and is set as default.

  I saw on another thread, someone having a similar problem, which was solved by going to "run", type "dxdiag" and enable direct features, however mine was already activated.

  If someone could help me I would be very grateful, thank you for your time.

  It is really strange. Your satellite notebook comes with Windows XP Media Center Edition 2005 and it should work. What kind of videos you want to use. Original DVD movies?

  In any case, using google, you can find a lot of interesting comments for this theme.

  A man simply offers the solution:

  + Just open regedit, then tap on +.
  + HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Cur rentVersion\Media Center\Display parameters +.

  + Then add 2 KEYS to DWORD called DisableDxCheck and DisableDx9CapsCheck and their two values 1 and Media Center should start without problem.

  You can test it.

• Equium A100-147: Impossible to get Bluetooth to work

  I bought an Equium A100-147 last week and noted in the manual it should have Bluetooth capabilities. However, I can't get this to work. I looked for my phone, and it does not pick up the computer as a bluetooth device. In the help files, it says I can set it up in the bluetooth settings in the Control Panel, but there is nothing in there. I tried to install the battery Bluetooth Toshiba, but it keeps asking me to install the bluetooth device.

  This computer actually has bluetooth abilities or not? If so, how can I get this to work?

  See you soon

  Hello

  Each unit with BT has BT label in the lower corner. Something like this http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm

  If you do not find it the BT is certainly not available.

• Equium A100-147 - sound devices do not work correctly

  I've owned an Equium A100-147 for only less than a year.

  The problem I have is that if I put pressure on the area around the left speaker (where is the VGA port) there is a substantial "cracking" / rattling noise. The right does not exhibit this problem.

  The other day with a same case design (model Satellite A), I got another PC Toshiba laptop and it seems to have a slightly stiffer construction quality.

  Is it worth getting it checked under warranty while I still have the warranty? Or am I just too picky?

  See you soon

  Interestingly enough, why you support on the area around the speakers. As far as I know the speakers are placed between the keyboard and display and keyboard there is no pressure to the speakers. Very strange method to test the functionality of the laptop! ;)

  In any case, you should contact the service because the speaker should be placed and fixed correctly.

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.

• Equium A100-147 replacement hard drive

  Hello

  I got a toshiba Equium A100-147 by a friend. The only problem is that it comes without a hard drive, because he still destroyed his old hdd to protect its personal and professional data.

  I saw in a local computer store a disk sata hard very good price for only? Â £38 it's a 160 GB w Digital Scorpio 5400 RPM 8 MB Cache S - ATA HDD laptop someone knows if it will work or this laptop does it work-specific hdd?

  Looking forward to any help you guys can give

  Hello

  Of course you need a compatible HARD drive.
  There are two different standards of HARD drive. SATA and IDE

  You need the HARD drive with the SATA interface. I think the original HARD drive was 100 GB.
  So a 120 GB and maybe a 160 GB SATA HDD should also be compatible.

  As far as I know the HARD drive slot was placed at the bottom of the unit and a screw secures the plastic cover.
  It of really not difficult to replace the HARD drive and I think that the details could be found in the user manual.

  Good bye

• Cannot install driver Equium A100 - 147 LAN (ethernet)

  Hello

  I have the same problem, as in the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17316 section.

  I downloaded and installed all the drivers that I needed on my Equium A100-147, but not working no driver Lan (ethernet).

  I have windows XP, home edition, SP2.

  I tried both types of drivers Toshiba download (and a few others also), that should work... but unfortunately, it does not.

  I'd be happy if someone could help me. Thanks anyway.

  Adam.

  Hello Adam

  Thanks for the feed back, but I must say that I'm really confused why you have problem to facilities with driver on Toshiba download page. In any case, the problem is solved and that's the most important thing! ;)

• Equium A100-147 doesn't boot up - no display on screen

  Hello

  I have a Toshiba Equium A100-147. When I turn, I see as the light of the maximum but there is no display on the screen.
  I read on a previous thread on a similar model that this has been fixed by resetting the computer.
  I understand there is a possibility that there is a problem with the motherboard, but I remain optimistic that a manual-reset would work.

  Is someone can you please tell me how this can be done?

  You can try this procedure simple and short;

  -Remove the battery from the laptop
  -disconnect 3rd external devices and adapter
  -leave the laptop for about 20-30 min
  -then reconnect battery and AC adapter

  If the portable fuel after this procedure, then your have a serious hardware problem and only the ASP can help you.

  I don t want to make a statement on the possible faults, because it of always hard to say what's wrong exactly, but it looks a bit like a motherboard problem.

  Good bye

• USB 2.0 Bluetooth DEVICE NOT RECOGNIZED - Equium A100-147

  Hi all!!!

  I have posted b4 about my problems of BT, but still no further forward.

  I have a 2.0 usb toggle universl BT, my last worked well until it broke.

  Since I had xp pro installed, but my USB does not recognize my rocking do not even have a pop up? any ideas.

  When I plug it 3 fast Dong

  Unplug and made 2 Dong

  I tried to install the drivers usb, but nothing.

  do my head now... Please someone help me resolve this issue!

  As far I know Equium A100-147 doesn t support the internal BT module and so if it was not equipped with the BT Toshiba stack.

  If you use an external 3rd party module BT, then you should check if there are drivers designed specially for this external BT dongle.

  Also, check if the BT dongle would be recognized in the Device Manager.
  If there is no dongle BT listed in the list of devices, then remove all controllers and hubs of UBS in the list and restart the device.
  After rebooting again Win XP should initialize the USB ports again and then you try to plug the dongle BT again.

  Good luck

• Equium A100-147: can not play games becauce slow DVD player

  Hello

  I have a laptop Equium A100-147. I tried many games on my laptop which should conform to the specifications required for example battlefield 2, however, these games does not work and I didn't know why. I then realized that all the games I tried were all on 4 DVD-ROM drive demanding x, and the specifications I provided with my laptop did not specify what kind of DVD player, I had another super multi layer or something.

  It is while I tried the games that were demanding CD-ROM which all worked fine, I then tried a game that was 2 x DVD ROM demanding that worked apart from a small problem with models of characters not displayed, so I took back defective. Then I tried a 1 x DVD-ROM game that worked perfectly.

  Today, I decided to get my DVD specifications, where I found that my laptop should read 8 x DVD - ROM drives.
  So my question is, is my defective DVD player for not playing more than 1 x DVD - ROM games? And can I contact Toshiba or my provider for repair or replacement or my problem would be something else?

  Thank you, Josh

  Hello

  As far as I know the laptop was delivered with the drive UJ - 841S and the drive supports 8 x DVD-ROM.
  Of course, there must be something wrong if the drive cannot read DVD-ROM media at full speed. The middle is not supported or the drive malfunctions

  What you can do is search for the update of the firmware. Many laptops come with the same drive. See the categories of driver and, possibly, there is a new update of the firmware.

  You can also try to remove the physical drive from the laptop and reboot the device without the drive. Then turn off the appliance, install the drive again and the boot upward.
  The laptop must initialize the firmware again and maybe this will help

  But it seems you notebook is not very old and the warranty is valid. If you need to contact the ASP in your country for more details and possibly for disc replacement

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Equium A100-147 - deleted CD/DVD drive

  I uninstalled the readers of DVD/CD ROM of my Equium A100-147 model PSAABE by mistake. How I can I restore it? I'm not very technical

  Hello

  It means that your CD/DVD drive is not more?
  Have you already checked the Device Manager if the drive is visible or not?

  Otherwise, you must follow the instructions in this Microsoft KB article:
  http://support.Microsoft.com/kb/314060

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye