Hidden Chronicles connect problem and blocking during the game. How to fix

When I try to start the game it constantly restarts itself, and even if I hit play, it keeps restarting.  Also when I'm looking for the hidden tracks, the computer locks and I have to restart my computer because there is no way to exit the game to restart.  Please send a reply.

Try the game support

http://support.Zynga.com/CP_LandingPage_WebFull?custlayoutid=1&GameID=1031&layout=WebFull&layouttmpl=Tmpl_WebFull_1

Tags: Windows

Similar Questions

  • BluRay BDPS3100 network connection problem and cannot remember the last position a DVD was finally play

    Third time, it will not make a network connection. Last two times, I called Sony about the probplem of Youtube, it turns out that it was a Sony problem and a week later, I did a udate software and it fixed the problem. Now for the third time, the device does not connect. Check all the settings and looks good. ??????

    And finally, the unit does not remember where the last stop on a DVD has been in the Middle film.

    Seems that it was poorly designed. I got my 5 years old and it worked perfectly.

    Maybe time to consider other products. Any suggestions?

    Someone has something they want to add?

    To the problem of internet connection, perform a power reset on the player and the router.

    1 turn off the player and the router, and then unplug the power cord for 1 minute.
    2. after one minute, plug the player and router and then turn on again them.

    You help us, please provide more information. How you connect the player to the internet, wired or wireless? Do you receive an error message? If Yes, please provide the exact error.

    For the movie problem, you say you cannot resume the film if you press stop or pause?

  • a game on the computer during the game, I get an error message that appears and turns off the game, how can I solve this problem?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    You have problems with programs

    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Please try to install the game in compatibility mode.  Here is some information that can be very practical...

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    -Check the functionality of the game under a spare user account

    -Updated video card driver

    Uninstall/reinstall video card

    Uninstall/reinstall the program

    -Clean Boot http://support.microsoft.com/kb/331796

    I hope that this information is beneficial.

    Thank you

    Aaron
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Wireless connection drops and reconnects to the games only?

    I have an Asus ea - No. 66, WIndows 7 64 bit, whenever I connect to a game, being especially csGO. I lose the connection and gain back almost instantly.  I'm not connected to the game or anything else. Then everything comes back online. I was wondering, which could materialize this project?

    Hi boozal,.

    Thanks for posting that query you in Microsoft Communities. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Windows wireless and wired network connection problems

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • Satellite A500-026 overheats and stops during the game

    Hey guys, any help would be appreciated.

    My 026 has recently started to overheat and stopping at random during video games. I can't even run TF2 to learn more, then one hour unless he suddenly died on me. It is never used for this months of use.

    I can assume there is a problem with my video card. I tried to download drivers to Toshibas site and the latest versions of Nvidia without change. I've already booked a Mobilecare service, I wanted to just evaluate what might be the possible problems.

    Hello

    Maybe this problem of high temperature of s.
    High temperature causes a closing down in order to protect the equipment against damage.
    But the question is why the temperature increases to critical level?
    One of the reasons could be a page nvidia graphics card driver. Such driver does contain protection against overheating. Therefore, use the driver of Toshiba page.
    I see that you did
    Well, the laptop seems to be a new a .so usually dust should not be a problem and fans should work properly

    A tip; Please make sure that you have enough free space around the laptop to ensure good air circulation.

    However, I recommend asking an ASP in your country for verification may be what he s hardware related issue.

  • Blue screen and stop during the game the sims 3 - BCCode 116

    Before that I got sims 3, I got a new graphics card - NVidia Geforce 9500gt 1 GB which I installed the latest graphics for drivers.

    My specs are:

    AMD Athlon 64 x 2 dual core 5000 + 2.60 ghz processor
    2 GB of Ram
    Hard drives 320 GB x 2 (1 is external) - I have a lot of free space, this one is not even half full

    power supply: 350W (minimum for 9500gt I know)

    32 bit Vista Home premium

    Right, when I play usually after 10 minutes, it crashes, sometimes just black screen but also sometimes with a blue screen with a prompt to close. I lowered the graphics settings in the game, it still happens. I uninstalled the sims 3, the drivers, and then installed the new driver then the sims 3, no change.

    BCCode: 116

    BCP1: 87E74510

    BCP2: 8CAC6150

    BCP3: 00000000

    BCP4: 00000002

    OS version: 6_0_6001

    Service Pack: 1_0

    Product: 768_1

    Information about the server: 5614db18-1ef4-4d21-bd8b-c2946f0e4d9d

    I know that bbcode 116 is a graphics driver issue but I have the last! It seems to be other people with the same problem especially with the sims 3, but no answers. I was afraid that my food wasn't enough, but this error is not suggesting that this is? I've heard rumors, it's a bug of the game, but not everyone has this problem.

    Please help, thanks

    I have now solved the problem after that talk with pny card - update of the bios manufacturer worked. I tried manually first and failed, but then found that my motherboard driver disks came with a program update that did it for me and I managed to play an hour of sims 3 without worries.

  • my itunes does not work due to a DEP problem and I don't know how to fix it

    can anyone help my get my itunes to work again for the DEP will allow him to open

    Hi bspack12,

    1. you receive messages or error codes?

    Data Execution Prevention (DEP) is a security feature of Windows, tracks how programs use memory. If DEP finds memory used incorrectly, DEP closes the program and let you know.

    Step 1:

    Try the following steps to turn off DEP for iTunes and check if you open iTunes.

    a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.

    b. click on advanced system settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    c. running, click settings.

    d. click the Data Execution Prevention tab and then click on turn on DEP for all programs and services except those I select.

    e. restart and see if it is resolved.

    Check out the link:

    Change Data Execution Prevention settings

    http://windowshelp.Microsoft.com/Windows/en-us/help/1d9bb9b4-f6ba-466D-AC2B-7b8c4f8361611033.mspx

    If you're still having problems, you can read the following article and try to uninstall and reinstall iTunes:

    http://support.Apple.com/kb/HT1923

    Hope this information is useful.

  • keyboard is as I am now a key and will not stop repeat during the game

    During the game on the internet keys I have insisted is "locked" and will continue to do the same operation repeatedly. How can I fix the problem?

    During the game on the internet keys I have insisted is "locked" and will continue to do the same operation repeatedly. How can I fix the problem?

    The keys on which?   For example, a common symptom is having some modifier keys seems to "stick" after they have been used in a repeat operation.   The solution is then to press and release the opposite modifier.   For example if a Ctrl key seems to be stuck and you know that you use RightCtrl - in a repeat operation, press and release - LeftCtrl.   Etc.

    FYI

    Robert Aldwinckle
    ---

  • Vista crashes during the game

    my computer hangs and feezes during the game play, usually if IT a game that requires an internet connection.  Norton could be the cause?

    Thanks for your suggestion.  However, it seems that the problem was overheating of the GPU.  The problem stopped Océ I improved the ventilation and added a small fan.

  • Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

    Hello

    Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

    Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).


    I did a few Google and found that we need to add something in the Essbase.cfg file as below.

    Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

    Possible problems

    Analytical services cannot lock enough blocks to perform the calculation.

    Possible solutions

    Increase the number of blocks of analytical Services can allocate to a calculation:

    1. Set the maximum number of blocks of analytical Services can allocate at least 500.
      1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
      2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
      3. Stopping and restarting Analysis server.
    2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
    3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.

    In fact in our queue (essbase.cfg) Config Server we have given below added.

    CalcLockBlockHigh 2000

    CalcLockBlockDefault 200

    CalcLockBlocklow 50


    So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.


    Kind regards

    Naveen

    Yes it must *.

    Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

  • Satellite L630-15U - block during the use of the

    I have a L630-15U Windows 7 Professional 64 bit, when I use in battery mode after a few minutes it crashes often. Everything has been frozen, I need to turn it off.

    Hey Buddy,

    What do you think average either it blocks during use?
    This means after a few minutes when you use your laptop with battery only if freezes and has to be restarted, no?

    Well, it's not easy to say which is the reason. You use the original Toshiba battery? Otherwise I recommend the spare parts and test with an original Toshiba battery.

    Also, you could try a BIOS update. Charge the battery up to full East, leave AC connected adapter and start updating the BIOS as an administrator. Close all programs that are running before do you (also antivirus).

    Check this box!

  • error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

    Hello

    Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
    There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
    help advise.

    Also, if you don't need it you can try to download it here.

    Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

    If you need to fix the error:

    Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
    http://support.Microsoft.com/kb/956698

    Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

    Or - these two (above and below must be the same)

    Windows Update Error 80070002
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

    Fix Error 80070002 when using Windows Update in Vista
    http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
    Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
    http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

    You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
    http://support.Microsoft.com/kb/910336

    Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
    http://support.Microsoft.com/kb/956698

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------

    If necessary, you can get free reports of incidents:

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

    Original title: cannot run Windows Update

    I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Can someone help me please?  Thank you.

    I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Can someone help me please?  Thank you.

    [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

    To disable the horse notification that appears in the status bar on automatic updates is turned off.

    Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

    [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

    http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

    [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

    visit windows update via the shortened link in your Start menu.

    When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

    http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

    Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

    [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

    Report back please on the status and please report problems with error codes. Thank you.

    Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

    Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

  • Problem access to Windows update, error: site has encountered a problem and cannot display the page you are trying to view.

    Original title: problem accessing Windows update.

    I just reinstalled a pre - SP3 of XP version. When I tried to download the SP3 I got the message: the site has encountered a problem and cannot display the page you are trying to view. I don't know what to do. Help, anyone?

    Download the following:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 (Service Pack 2)
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24 (Service Pack 3)

    Ignore warnings about these packages for computer scientists, or only of the
    too much network installs and others.  These are full Service Packs which can
    be installed without an internet connection or when no other SPs are
    installed.   Install SP2 first, followed by SP3.

    NOTE: If SP2 is already installed on your computer, or if the SP1a is installed, go straight to the Service Pack 3 package.

  • Windows XP update error: 0x8024D001, the site has encountered a problem and cannot display the page you are trying to view.

    Original title: Windows XP ~ Windows Update problem.
     
    During three days of solid, and I slept then work, sleep and then working to solve a problem I have with the functionality of Windows XP Windows Update - this is the error message I get constantly

    [Error number: 0x8024D001]

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    I installed a new copy of Windows XP on a hard disk nine, installed Service Pack 1, Service Pack 2 and Service Pack 3, installed Internet Explorer 8 installed .NET Framework 2.0 as Microsoft requested, modified popup settings to allow Windows Update page to be free to scan my system for updates, etc... and I even enabled all Active X permissions BUT I still can't Windows Update to allow me to download all updates, patches, etc... Windows Update has generally

    I also turned on automatic updates requirement also BUT no dice - I can't just not update Windows to activate and start as normal, no matter how many times I format the drive and do a fresh install.

    I had to get a new drive hard as my old crashed.

    Now, I have to install Windows XP again but I noticed how old, easy to update somehow has been paralyzed.

    It's as IF Microsoft is crippling of Windows Update to start simple as pie, then now we users HAVE to jump through hoops to get our operating system Windows XP set to day and repeatedly queries Microsoft asks us or install 'FIX IT' service does not work and it is impossible to reach by phone about Microsoft , and the live online help runs into errors when it is installed, so I have to hit the Internet Forum here for advice.

    How, in words simple Windows XP allow Windows Update to run the scan, to download and install the process what it is supposed to do?

    What exactly is missing to allow the screen to show the green bar and scan the notificiation there have updates available?

    What I am doing wrong?

    I really hate to say this, BUT I'm literally at the edge of tears.

    Help!

    Is there a maintenance program master as an "all-in-One rollup patch" that will search the lack of programs, applications, and settings of Windows XP and makes a one-way relay to set everything right and ensure that the programs needed to make Windows Update work are knitted in Windows XP, including all programs missing subprogrammes and to settings then check their self errors or incorrect version but it provides goes off to FIND the RIGHT version of What is needed?

    Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be found in the downloaded Windows Update but rather is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

    You need 3 things to WU work.

    WindowsXP-KB892130-ENU - x 86 .exe   KB892130 Windows Genuine Advantage Validation v1.9.42.0
    WindowsXP-KB898461x86 - ENU.exe   KB898461 Installs a permanent copy of the Package for Windows Installer

    And and unofficial WUA.

    He's right on obsolete dll of WUA that MS is not updated once sometimes for some unknown reason... even the WU Fix there don't solve it. I ran a few tests in the fall and virtual machine on the same issue yesterday. You must install the unofficial Windows UPDATE agent.
    Windows Update Agent below... MS last isn't the last. Boo Ms.
    Download WindowsUpdateAgent7.6.7600.256 - 257.zip to your desktop (MS does not have the latest version of Windows Update Agent. Only 7.4.7600.243 so make us with this).

    Unzip it, go to the folder and double-click RunMe - MakeInstallWindowsUpdateAgent.bat.

    It will download, MS, the files needed to create the Windows Update Agent 7.6.7600.256/257 and then install it. The files that it contains are 100% Microsoft. He uses just a few third-party tools to make it.

    You will be left with the installer, WindowsUpdateAgent7.6.7600.256 - 257.exe. Keep or delete. Your choice.

    Analysis antivirus for WindowsUpdateAgent7.6.7600.256 - 257.zip

    Information for network administrators about how to obtain the latest Windows Update Agent

    Taken from the newsletter above...
    View
    There is no stand-alone installer for the latest version of the Windows Update Agent (7.6.7600.256)

    EDIT: I forgot to mention. It took 1 hour before the scan finished for me. A guy that I was helping on another forum just let WU scan of the day to the next. When he awoke, the scan had the results. So please be patient.

    "Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be in the downloaded Windows Update, but instead is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

    You can create a CD to date and does not deal with all the hassles during the fresh installation. You need nLite and my script of the UDC. You will only need SP3 when "slipstreaming". No SP1 or SP2.

Maybe you are looking for