Hide taskbar displays behind pages in Vista

Similar Questions

• When my friend l. a automatic updates for Windows Vista, it can no longer browse the web, well connected (as evidenced by Skype and diagnostics) the message "internet explore cannot display the page" coming up. Is there a way to fix this?

  Explore cannot display the page
  Vista updates
  Restart

  Hello

  Welcome to Microsoft Windows Vista Forums.

  I suggest you follow these steps:

  Method 1: See if you can view another Web page

  To do this, follow these steps:

  Start Internet Explorer.

  In the top of the browser address bar, enter one of the following addresses:

  http://www.Microsoft.com

  http://www.MSN.com

  http://support.Microsoft.com

  If you do not receive a similar error message after entering one of these addresses in the address bar, contact the owner of the Web site where you see the problem. The website is maybe temporarily unavailable or other problems.
   
  If you receive the same error message, go to the next method.

  Method 2: Run the Network Diagnostics tool in Internet Explorer

  To do this, follow these steps:

  Start Internet Explorer, and then try to access the Web page that displays the error message.

  On the page that displays an Internet Explorer error message, click diagnose connection problems . The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  He was unable to find a problem.

  It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Note Users of Internet Explorer 6, click on detect network settings

  Click IP address , and note the IP address. You may have to it for future troubleshooting.

  Follow the steps in the Network Diagnostics tool to fix any connection problems.

  Start Internet Explorer.

  If you receive the same error message, go to the next method.

  Method 3: Use the delete browsing history

  If resetting the modem or the router has not resolved the problem, delete your browsing history might help. Follow these steps to delete your temporary Internet files, history and form data:

  Internet Explore 7

  Start Internet Explorer.

  On the Tools menu, click delete browsing history .

  Select the check box next to Temporary Internet files .

  Select the check box next to the history .

  Select the check box next to form data .

  Select the check box next to Cookies .

  At the bottom of the window, click delete .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  Internet Explorer 6

  Start Internet Explorer.

  On the Tools menu, click Internet Options .

  In the Temporary Internet files section, click delete files and then click to select the text box delete all offline content , and then click OK .

  In the history section, click clear history , and then click Yes .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  If you receive the same error message, go to the next method.

  Method 4: Use the Internet Explorer (No Add-ons) mode

  To do this, click Start , point to programs , point to Accessories , point to System Tools and then click Internet Explorer (No Add-ons) .

  Note The Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  Click Tools and then click Internet Options .

  Click on the programs tab, and then click Manage Add-ons .

  Click an add-on in the name list, and then click disable .

  Repeat step 3 until you identify the add-on that is causing the problem.

  If the methods in the "Resolution" section General did not resolve your issue, you can try to use the methods in the "Advanced Troubleshooting" section If you are not comfortable with advanced troubleshooting, you can ask for help or contact support. For information about how to contact support, please visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?PRID=12357

  For more information follow the link below:

  http://support.Microsoft.com/kb/956196

  Hope this information is helpful

  Suresh G

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
  There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
  help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Or - these two (above and below must be the same)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents:

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Impossible to update "site has encountered a problem and cannot display the page you are trying to show."

  When I try to update either using the can I Update or Microsoft Update I get the following message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "

  When I open Microsoft Security Essentials and click Update I get the following message: "the Virus and spyware definitions failed and an error code: 0 x 80070424 message.»

  I am unable to get the position of automatic updates to turn on. I followed a few threads that says run "services.msc" Background Intelligent Transfer Service is ongoing as is the workstation but automatic updates does not appear!

  I tried auto Fix It and automatic installation of updates, but still no luck.

  All the other programs on the seam of my computer for updated correctly. and seams of browser to work properly. I also tried dissabling my firewall and adding the site to my trusted sites update and that didn't work either.

  I'm on PC based on Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Build 2600 on a Toshiba X 86 vs

  Q: which antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?
  A: I do not uninstall [McAfee Security Center before] I installed MSE...

  See...

  Checklist for installation of Microsoft Security Essentials
      http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Should I have any other antivirus software and Microsoft Security Essentials?
      http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspx

  ======================================

  You could try the following:

  [You may want to print these instructions for reference offline. [If a step said to restart, restart!]

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  1B. download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall McAfee Security Center & reboot.

  4. make sure that the Windows Firewall is now enabled.

  5. If S * PERAntiSpyware is always installed, uninstall it and reboot again. If not go to # 6's.

  6. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  7. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the automated troubleshooter from end to end. [1]

  9 restart a last time & test. Make absolutely certain that you can update MSE manually using the update on the update tab button.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

• Program cannot display web page on start up - replacements all & freeze safe mode

  Hi, on my pc startup (Vista) after the initial office, he's going on a blank white page with information i. Message is "the program cannot display Web page". If I try to start the task manager that flashes briefly upward, then the white screen resumes. If I try again, I get a black screen. While the screen is in place I can't do anything else or run programs at startup upward until this screen.

  If I boot in safe mode, the top of desktop and icons here, but I can't do anything else - even closed. I have to press the power button until the PC is emerging.

  I don't know how to do BACK guests or find how to work around this problem. I tried several searches but all the answers are in line to remove this or that or a scanner. I don't have access to all programs do. Even the answers on this site so far await you to be able to run other programs of some sort. I'll have to write this on PC of the wife. Any help / suggestions gratefully received.

  Thank you, Nick

  You can use Windows Defender in offline mode, use a PC secure and download and use:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  And then use removable media or a CD/DVD and create the startup and startup disk in your infected PC and then run a full system scan. You have no need to start your system in this way.

• Internet explorer 8 can not display web page

  "I have a brand spankin' new Windows 7 laptop with internet explore 8 w / 3 GB ram, 250 GB HARD drive, processor intel dual core so I guess it should be fast enough, but sometimes it is not when I try to connect it tells me," cannot display web page.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Hide all ads browse page

  What can I do to prevent the display in page browse all ads?

  I tried to remove all ads from all the mappings to map, choose the type of advertising = Non-annonces in all map mapping rules. It's the Dungeon showing upwards using the default map.

  Is it possible to hide ads?

  Hey Espen,

  You must set 'hide browse page' on the article itself. Map mapping rules define only what cards are applied to the content, they do not control the visibility or control of the content.

  Neil

• Hide parts of a page when printing on paper

  Hide parts of a page when printing on paper

  I read that I can create a css for a specific type of media file.

  I created one called print.css and print selected as its media.

  And inside, I created a username called #col_right

  And the value of the option to display as a block against zero

  This poster on the screen of the computer and as expected not to print on paper.

  Grand - just as expected (hoped )

  However! There is always a but...

  It was for a div which had a id = "col_right" specified

  Which is what I expected.

  But, my menu bar is in a div, it has a class = "MenuBarHorizontal" but it doesn't have an id = ""? "tied to it."

  So, how can I hide the menu bar in the press outs?

  Thank you

  It makes no difference whether an ID or a class because the style like this will do the trick:

  Make sure that there is a period before MenubarHorizontal as:

  . MenubarHorizontal

  Good luck.

• A full justification and display two pages do not work correctly on iOS 10

  I have installed iOS 10 yesterday on my iPad 2 Air but have found that the two functions do not work correctly in iBooks. First of all, full justification does not work when the font size is brought to a certain level. In other words, a complete justification works only when I reduce the police to a size too small. It then automatically left justification when I increase the font size to a comfortable level. This feature, however, works perfectly on iOS 9.3.5. Secondly, as already posted by a member of this community of support, the option to display two pages does not work correctly. Also, this feature stops working when the police is increased to a certain size.

  Someone at - it solutions?

  It is not a solution. Apparently, it's just how it is in the new iBooks. I would say that we all leave comments that we do not like it. This is a feature of iOS 10, so it won't go away unless we do a big noise about it. I just got my Mini iPad so I don't have to deal with.

  www.apple.com/feedback/iBooks_iOS.html

• Don't display two pages does not correctly in the iOS 10

  I've upgraded my iPad to iOS 10 2 Air tonight, then went to continue reading a book that I bought recently through iBooks.  Display two pages, when the iPad is in landscape mode, does not appear now - unless I do the police really small.  If I increase the font size, while in the landscape to something more readable, I get only a single page view.

  I deleted and re-uploaded the book, but the behavior is the same.  I signed up in iBooks on iPad an another running ios 9.3.5 and display two pages work properly, with normal font sizes - sizes that won't let me see the same book in two page mode on iOS 10.

  Apple - help!  I really prefer the reading with the fashion landscape of two pages in iBooks.  I can't, however, seem to get this to work with anything other than tiny fonts.

  Has anyone else noticed this?

  I also noticed. Any solution?

• Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

  The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• 11.0 Firefox incorrectly displays web page

  11.0 Rev will not display this page. Using this URL will open an empty window. In Safari, the window contains information. I have this post as a bug report, but may not know how to post a bug report.

  Are there no content at all on these pages?

  There also nothing in the page source?

  If you open the Web Developer > Web Console (Cmd + Shift + K), you see that Firefox loads the content of the page?

  Make sure that the two (errors, Log) the Net menu items are enabled.

• Internet Explore cannot display the page

  Hi all

  I m new to this and I need a little help that one when I connect to a Web page, he says internet explore cannot display the page. Any ideas how I can fix this problem? Be grateful for any help.
  Thank you all.

  First question;
  Haven't you set up the modem or the router correctly?

  Maybe your connection to the ISP (Internet service provider) was not set properly and so you are not able to connect to internet!

  Have you tried to connect to the internet with other computers?

  Reading your post I n t think that there is something wrong with the laptop

• Is it possible to edit Firefox context menu to the standard address for the displayed Web pages?

  Is it possible to edit Firefox context menu to the standard address for the displayed Web pages? Often, I want to save an image on a page. Sometimes I "slip" and press "Send Image" when I want to "Save Image under" and sit and wait for the default page - send an email to come, then shut up, juggling its dialog boxes "are you sure". It is a way of trying to manage a blunder. Basically I want an element directly from a page by email. Is it possible that I can simply remove "Send Image" from the context menu?

  It is possible with the Menu Editor extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/710

• Cannot display a page on a particular Web site

  I use a laptop computer with mobile broadband. I don't (normally) have no difficulties to display web pages of any site. Today, however, when I go on the pages of Waterstones bookstores I can't see all the images of the homepage. that is where I see products. I have checked other sites (non-Waterstones) and have no problems elsewhere. I checked this site on another PC and there is no problem. I must have accidentally done something in Firefox that has disabled the display of this site. Can anyone help?

  See also http://kb.mozillazine.org/Images_or_animations_do_not_load

  You allow images of third parties?

  Check the pref permissions.default.image on the subject: config page and make sure that it has the default value 0.

  See http://kb.mozillazine.org/about%3Aconfig