Hide the image when sending as an attachment in Windows Mail

Similar Questions

• When you open an attachment in Windows Mail, the text is unreadable

  Hello
  Cannot open attachments... Windows Vista Edition Home Premium... The opening, I have
  get a bunch of characters (garbage, some looking Greek) instead of readable
  info. If the MSG contains a PDF file and I use Adobe Reader, I get a
  error: "Adobe Reader could not open file...". It is either corrupted or damaged
  (or not a supported file type. "If these same"issue"attached files
  are sent to another computer, no pensionable malfunction the
  Spare part. Help, please. You will enjoy. Ed

  See point 1 here: www.oehelp.com/OETips.aspx#1

  Then locate the antivirus interference (there are a number of antivirus which are not compatible with Windows Mail programs).  See point 3 on the same page: www.oehelp.com/OETips.aspx#3

  Then try to empty your temporary Internet files of Internet Explorer (Tools |) Internet Options | Delete files).

  Then compact and repair the Windows Mail database (www.oehelp.com/WMUtil/)

  See it if you can save attachments (keep it before opening).  Note (point 3 above) you will need to remove and add your e-mail account, if the antivirus is interfering.

  see if that helps.

  Steve

• When you open an attachment in windows mail it seems to take ages to open sometimes up to 5 minutes.

  can you help me

  Hello

  
  1. What is the format of the attachment?
  2. which browser is installed on the computer?
  3. what anti-virus is installed on the computer?
  
  Method 1: Temporarily disable anti-virus and see if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Method 2: Perform the clean boot and see if the problem resolves.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  http://support.Microsoft.com/kb/929135

  
  Hope this information helps.

• After installing yesterday 16 updates of Windows, all the IMAGES have disappeared from incoming messages from Windows Mail. Any idea update could be the culprit?

  I'm using Vista HP 32-bit SP2 with IE8. Never had this problem before - and all IE/Mail settings are correct.

  Request/reply to the newsgroup Windows Mail earlier today: http://groups.google.com/group/microsoft.public.windows.vista.mail/browse_frm/thread/d10ec304366ee536

  Tip: Set up Windows Mail (Vista) to access the Microsoft newsgroups
  http://www.Winhelponline.com/blog/Microsoft-newsgroup-Setup-instructions-for-Windows-Mail/

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• How to reduce the size of an image to send as an attachment to e-mail

  Sending photos as attachments to emails

  How can I reduce the size of photos for me to email it more?

  How can I reduce the size of photos for me to email it more?

  ===============================================
  In Windows Live Photo Gallery... Select (highlight) an or
  more inches and left, click the e-mail button in the toolbar...
  The "Attach a file" dialog should open and you can choose
  one size by opening the drop window "size of the picture.
   
  Also... in Windows Live Photo Gallery... Right click on one or more
  selected inches... Choose... "Resize" in the menu. Choose
  one size, navigate to a folder to save in left click the ' resize
  Save "button. (I suggest that you save the resized pictures
  in a new folder to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  And... you'll love the next free loop:

  VSO Image Resizer - (Windows XP/Vista/7)
  http://www.VSO-Software.fr/products/image_resizer/

  VSO Image Resizer (tutorial)
  How to resize my images and photos?
  http://www.VSO-Software.fr/products/image_resizer/how-to-compress-photos/how-to-resize-images-Guide.php

  Prish Image Resizer - PowerToy for Windows XP/Vista/7
  http://prishcom.spaces.live.com/blog/CNS! 6A6A204ABDF15411! 128.entry

  
  Prish Image Resizer tutorial)
  http://www.Winhelponline.com/blog/Prish-image-resizer-PowerToy-Windows-XP-Vista/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?

  Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?

  InDesign has no control on how Apple Mail displays a PDF it creates.

  My experience is that Mail displays a preview of a single PDF page, but not a multiple page PDF. In addition, for a single page PDF, the user may tip if the PDF shows a preview by right-clicking the icon/preview.

• Cannot reduce the photos to send as an attachment

  My Windows photo gallery when trying to send photos, I can click on e-mail and the dialog box attach files appears.  I can then select an image size and click on attach.  From there nothing happens... Windows does not open a new e-mail message with the attached picture.  Help, please!

  It helps if you give all the relevant information in your question.

  You must have Windows Mail configured to do; Outlook or if you have a particular version of office...

  You don't say what e-mail program you use.

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• How to hide the image displays for lightbox

  With the help of DW, I have a screen of lightbox.  Here is the page:

  Example page

  As you will see, if you click on the photo, it opens on a viewer.  My colleague wants to have 10 pictures to open in the light therapy device, but they don't want all these photos to have thumbnails on the page.  In other words, they want a single photo, you click on it and then see all 10 in the lightbox.

  If I put all the code img for all 10 images on the page then all 10 images will be also visible on the page.  So I need to somehow 'hide' the images so that the small version of the photos do not appear on the page but will be displayed in the lightbox.

  Sorry if that sounds confusing and I hope someone can help.  Thank you.

  Deaf Mike wrote:

  I've never seen either as it already existed on the site, and I discovered it actually just.

  Here's another example

  When you get to the above, click on the turtle and you see how many photos are in the lightbox.  Then close the light box and scroll down and click on those + symbols.  See the other images in the other sections?  Somehow the code takes these pictures in the album too.

  I want to do the same thing, but the key is there is no + symbols on the page - just picture a turtle and when you click on the turtle, all other photos appear in the box to light.  Another thing I think to do is to have picture of a turtle and then 10 1 pixel by invisible image of 1 pixel down at the bottom of the page and then have 10 of them, and then the ref h for each are the larger photos - in this way, when you click on the turtle, the code will pull large pictures of the 1 X 1 in the light box.

  Well it would be pretty easy to do as 'By' suggested in the previous post and hide "thumbnails" you do not want on the page:

  Create a rule in your css - something like:

  .hide_thumbs {display: none ;}}

  So in general a set of images of the light box might look like the code below. (when you click them they open in a lightbox and this lightbox usually has an option to display the other pictures in this particular Gallery by clicking through them, rather than by clicking on them individually).

  

  

  

  

  If you add a class = "hide_thumbs" ones you don't want to show get the display: none; property, BUT they must remain available in the lightbox click through.

  

  

  

  

• Show/hide the image with audio (audio does not if necessary)

  Then, I ran some tests to see what was going on so I could better explain my problem.

  I have a slide with a picture that has four clickable areas. First of all, the student listen tell me for a few seconds and then is invited to click on the image areas that are highlighted.

  When the user clicks on one of the fields, an image appears and I taped audio on this 'object '. Note: I didn't use the slidelets substitution as the clickable area is hidden by the new image when the image appears on a click. The user will press a close button that is on the image, set with another clickable button to hide the image then select another pop up box. (See image below... you can see the image of forklift under the transparent image gray... This is where the user clicks the highlighted area).

  

  I tried two ways:

  having the image plays on the whole timeline from beginning to end of blade (be hidden with the show/hide button function)... when I do it, the sound will not play at all (I'm guessing that this is because the audio went silently on the first few seconds of being on the screen, so by the time the student clicked the button finished audio).

  and

  Drag the beginning of the image to close the timeline when the user is asked to click on areas of the screen... when I do that, the sound play a bit, but gets cut off after a few seconds.

  If I click on the areas as soon as the blade begins to play (since i KNOW where the buttons will be activated), the audio plays very well which makes me believe my theory that the audio runs just at the moment where the user gets to click on it.

  There is no break on one of the buttons around this period, so I know this isn't that.

  What I am doing wrong?

  Thank you! :-)

  I'm happy to say after hours of frustration, I finally got to work.

  I went and read your blog Lieve on micro navigation and managed to keep the images at the point of the slide where the user is asked to click on them and define the action of tip:

  to display the image,

  hide the other images and

  Use the assign with 705 rdcmdgotoframe

  and added a line to continue so it wouldn't break (if I do this, it seemed only allows only not the last his image clicked / or show the function works because I have an action secondard on the second tab to display the button 'next' once all are clicked).

  I had to do the math, but thanks to your info on your blog, I was able to understand this. I just tested it and it works... so I'm not going to save and close and breathe until Monday when I can run my final tests on the entire project!

  Thank you!!

  ~ Gina

• HX850 - no adjustment of the image when using netflix

  Hello

  Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

  Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

  THX!

  Hello FA5_FLIP.
  Welcome to the community of Sony and thanks for the post.

  Setings photo on TV are not accessible when you watch Internet channels.

  Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

  Are the same Netflix videos appear fine when transmitted in an another TV or computer?
  Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  Try to update the Firmware of the TV to the latest version.

  Try to separate the TV from Netflix account and even add a link to it.
  Follow the steps below to remove the TV has Netflix.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

  Thank you.

• I have problems when sending emails on Outlook Express (Windows XP Home) told in the Outbox, even if they were sent. What can I do?

  I have problems when sending emails on Outlook Express (Windows XP Home) told in the Outbox, even if they were sent.  What can I do?

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• How do I remove or hide the images

  How can we remove or hide the image

  wherever you add the field... u can call the delete (field) method to remove it.

• How to hide the 0% when it is empty

  I have a form field that is formatted to be a percentage, but when the field is empty it displays '0% '. I need this area to be a Virgin until I get back a value.

  The validation script "if(event.value == 0) event.value = '';' does not work for percentages and I have not been able to find a solution through research." Any help would be greatly appreciated.

  Oh well, thanks for the help, person. I managed to find a partial solution. Although it is not completely perfect, it is achievable.

  This custom validation script allows to hide the 0% when the document is printed:

  Event.Target.Display = event.value == 0? display.noPrint: display.visible;

• How do I enlarge the image when the mouse is clicked

  I want to enlarge the image when the user clicks on the image. How to make muse? Thank you!!!

  I think you are trying to implement something like 'Click to see in original size' for images in a slide show widget. If that's what you try to achieve, refer to a similar thread here a possible solution: http://forums.adobe.com/message/5225256#5225256

  Thank you

  Vinayak

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data