Hide the SSID 1832i

Hello, I have the Cisco Aironet 1832i (series 1830) model.

I would like to know how many non-broadcast of the SSID of the wlan 2 I created (the main and the SSID quest)

Please let me know the commands I have to configure SSH, as the Cisco operating system is different from the other type of Aironets.

Hello

Must be identical to that if you can access it via the CLI (Telnet/SSH):

https://supportforums.Cisco.com/discussion/12947811/Cisco-Aironet-1830-disable-SSID-broadcast

The CLI is available, the following command:

config ssid broadcast disable wlan where wlan id is the number of your wlan. If in doubt, do a show wlan summary which should give you this info, I hope.

Tags: Cisco Wireless

Similar Questions

  • hp7520 disable wireless or hide the SSID

    Hello.

    I have a HP Photosmart 7520.

    It works fine except my client does not want the ssid broadcast in the doctor's office.

    It is already password protected, but he dislikes the ssid 'disorder' in the air.

    I would like to disable Wi - Fi to the printer or at least hide the ssid broadcast.

    Is this possible?

    Thank you.

    Go to the printer and turn off wireless Direct.  Quite.  This assuming the printer is connected to the router.

  • Cisco Wireless - E2500 N Dual Band router and hide the SSID

    Hello

    I tried to hide my SSID by allowing emissions the SSID of the first, and then the other band.

    Once I have say-activated the SSID broadcast of the last band my laptop, which has the wireless card, would lose connection to the internet on reboot.

    I read somewhere, but now can't find the article, you can hide those SSID, but it requires some work to connect to a network that is more diffuse.

    Someone has knowledge on how to go about this, or maybe they could point me to a resource that explains how to set this up... thanks.

    Tom.

    The properties of the wireless network. Check "Connect even if this network is not broadcast".

  • WiFi does not connect if the SSID is not broadcast.

    I've updated to Sierra this afternoon. Everything seemed fine after the update. After dinner, my MacBook Pro (retina, 15 inches, beginning 2013) would not connect to Wifi. I reduced to a few things.

    It wouldn't connect the 5 GHz n If the SSID has been hidden. If I admitted the SSID to shown, it would connect without problems. It would connect to the 2 GHz band, even with the hidden SSID.

    I did the typical SMC reset and reset the NVRAM. I deleted the files related wifi and restarted the router and the MBP. I'm obviously on now and the speed seems normal with no dropouts. I can't hide the SSID now and will continue to work until he's asleep; No dice after that without reactivation SSID broadcast.

    Any thoughts?

    See you soon,.

    Fred

    With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers. They will answer your question: Bug Reporter https://bugreport.apple.com/

  • How to hide the music with iOS 10 offline?

    I would like to hide it bought songs, that I deleted in my music. This way to hide the songs offline.

    Hi HM57,.

    Thanks for your questions, but I'm not sure what you're trying to ask. I see this one of two ways. The first is that you want to hide your purchases so that you don't see them on your iPhone. The second is that you only want to see content downloaded to your iPhone. I can answer these for you two.

    To start with the first scenario, you can hide purchases from the iTunes Store. To do this, you will need to use iTunes. Access your purchased content as if you were to download it again. When you move your mouse over the content, you will see an X in the upper corner of the work. Click on that and you will see the option to hide the content you've purchased. This will ensure that when you look at your iPhone and the content is not downloaded, you will not see it.

    Take a look at the article below for more details.

    Hide and show the purchases made on the iBooks Store, App Store or iTunes Store
    https://support.Apple.com/en-us/HT201322

    For the second scenario, you can only view content downloaded to your iPhone. To accomplish this, open the music application and make sure that you are on the Library tab. You should see and option for downloaded music. Tap that and you will see the downloaded content. For reference, see the image below.

    Nice day

  • hide the icloud music in

    Hello

    Is there a way to hide the iCloud music that has not been downloaded on iPod Touch 6th generation, I have updated to iOS 10.

    It is annoying when I'm dragging through music and a song at random no-downloaded jumps through.

    Thank you

    Go to music > Libray and press Edit. Check the line item for downloaded music. Then only downloaded music will show

  • How to hide the face in Photos tags

    Sometimes the face tags can occluding an important part of a photo.

    I would like to temporarily hide the face tags, while browsing through the photos.

    Is this possible in Photos? (version 1.5, OSX 10.11.6)

    Thank you very much in advance.

    Sorry, I was too reckless. It is, of course, in View-> hide face names.

  • How to hide the brackets and tuplet numbers?

    Hi all.

    Is available to hide completely the support numbers?  When I click on the support of the Tuplet window opens.

    I click on support to hide and hide the numbers.

    and I can see on the photo right tuplet with nothing. But after clicking OK, I still see number.

    He's not on the image above. Why? How can I do? Thanks in advance.

    When you hide the support and the number, they will not appear in the printed score. Try to print you have in pdf format and it is not on the printed score. However it is persistent with parentheses around it to mean in page view is a triplet is visible only in the score editor.

  • Safari and Firefox needs ways to hide the tab bar, bar Favorites (bookmarks), so that they are not visible to others your screen, or on the full screen captures.

    Safari and Firefox needs ways to enable/disable/hide (the menu and via shortcuts) tabs, Favorites (bookmarks) bar, (and bar address [which do not have Safari]), so that they are visible to a person who you show your screen not visible on just one full screen. Yes, you can expose a screenshot that excludes one or more of these bars, but it is a nuisance to have to do, and in any case, that still leaves the problem of the bars being visible to other people who show you your screen.

    The extension does not hide the toolbars?

    On Mac in mode full screen isn't really full screen and don't cache not toolbars like on Windows and Linux.

    There are extensions to hide specific toolbars if you can't do via "view > toolbars".

  • How to hide the button "Start a conversation" using mozilla.cfg

    Hello

    I've just updated to FF 41.02 and my mozilla.cfg does not hide the smiley face icon (start a conversation). Anyone know how I can do this?

    Here's the line I use for my mozilla.cfg to show/hide icons

    lockPref("browser.uiCustomization.state", "{"placements":{"PanelUI-contents":["edit-controls","downloads-button","new-window-button","privatebrowsing-button","zoom-controls","developer-button","fullscreen-button","preferences-button","history-panelmenu","save-page-button","find-button","add-ons-button","loop-button"],"addon-bar":["addonbar-closebutton","status-bar"],"PersonalToolbar":[],"nav-bar":["urlbar-container","search-container","print-button","home-button"],"TabsToolbar":["tabbrowser-tabs","new-tab-button","alltabs-button"],"toolbar-menubar":["menubar-items"]},"seen":[],"dirtyAreaCache":["PersonalToolbar","nav-bar","TabsToolbar","toolbar-menubar","PanelUI-contents"],"currentVersion":4,"newElementCount":0}");

    Thank you

    Hello

    I managed to get out.

    lockPref ("loop.enabled", false);

  • Script to hide the dock while using Adobe software

    Hi guys,.

    I'm wondering - is it possible to write a script, automator service or something that hides the dock automatically at launch of Photshop exaple? It would be helpful since software Adobe is not fullscreen support.

    Thank you!

    Does not "automatically hide / show the Dock" in System Preferences > Dock?

  • How to hide the "quit firefox" button using userChrome.css?

    I added the add-on "Restart" and want to make sure that I have accidentally do not click on the button "exit firefox" in the main menu of firefox. What should I add to my userChrome.css file to hide the button?

    #PanelUI-quit { display:none !important; }

    Alternatively, you can consider changing the order of these buttons with rules of - moz-box-ordinal-group.

    #PanelUI-quit
    #PanelUI-customize
    #PanelUI-help
    
  • How to hide the address bar when windows 'popup' fullscreening?

    Video player Sky TV has an implementation of bad full screen - you can make the player go true fullscreen, but it comes back when he loses focus, so I can't multitask on my two monitors.

    The best solution I found is to use their 'pop-out' reader, which opens a new "popup" - style window (locked address bar, no search bar etc) and I can't then full screen window itself (not the player). This allows me to hide

    -the outline of the window
    -the title bar of window
    -Windows Start menu

    and it remains enlarged when it loses focus.

    However, this does not hide the window address bar. On a larger window of Firefox at the normal address this slides out of sight after a short period. locked style "popup" window is not.

    On the offchance that treat differently the "pop-up" windows is a deliberate... Firefox security policy can I disable it?

    Well, this is embarrassing.

    I went to try to settle the dom.disable_window_open_feature.location from true to false.

    However, before doing so, I noticed that the address bar of the popup window was now floating as usual.

    I'll keep an eye on it in case it stops again, but for chalk now it up to the stupidity of the user.

  • Hide the second boxing until I need

    I am very appreciative of all the help that I received so far. Toad hall has been very helpful and explained how I could hide the second to box when you compose a message. I know now how to do it, but I can keep it hidden until I read to send copies to other people? Or what I need to do it manually on every email that I send?

    Thank you.

    It is in the registry of Thunderbird, but Thunderbird has a UI for it. Go to tools-> Options-> advanced-> general, and then click the Config Editor button on the lower right. Click on "I'll be careful, I promise!" on the warranty page (this seems worse than it is) and filter on mail.compose.addresswidget.numRowsShownDefault.

    Here you can change the value to 1 (default is 3).

  • Is there a way to hide the button of hamburger?

    Is there a way to hide the button of hamburger?

    http://userstyles.org/styles/101011/hide-Firefox-menu-button

    or using a userChrome.css file

    @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
    
    #PanelUI-menu-button {display: none;}

Maybe you are looking for

  • LightScribe drive

    I've been burning CDs on my drive, and then burn lightscribe labels.  Suddenly today, burner lightscribe program refused to recognize that I have a lightscribe device in my computer.  I can still burn CD, DVD, etc..  How to solve this problem?

  • Windows 7 Home Edition premium does not start

    Hello... I have a HP G60 Notebook PC with windows 7 home premium (original) I was with my computer laptop to surf the net when suddenly he stopped and when I tried to start again... .the sdcreen came, and then a small dialog box pops up saying "Windo

  • the list of lvproj vi

    I'm looking for a way get a list of the screws used in the lvproj file. Is this possible? I have features for vi calls made by a vi given but need to filter based only on the vi is used in a project. Currently, I am forced to look through all my scre

  • Photosmart HP 6515: Photosmart HP 6515 scans and copies with 100 lines

    Photosmart HP 6515 prints very well on the computer.  Scans and copies have hundreds of lines from top to bottom.  I have run the doctor, installed the drivers again and again, also all updates. That's what I mean when I scan.

  • DVD disc drive tray keeps opening and closing constantly

    FOR WINDOWS VISTA HOME PREMIUM EDITION DVD CD ROM DRIVE TRAY KEEPS OPENING AND CLOSING CONTINUOUSLY - GET COMPUTER TO READ DISCS AT ALL - OTHER ASPECTS OF THE COMPUTER RUN FINE - DIAGNOSIS SAY THAT HE DIDN'T THERE HAS NO PROBLEM WITH ANYTHING. IN DEV