Hide the test button USE during execution



Tags: NI Software

Similar Questions

  • How to hide the Submit button in the TEB?

    Using Cap 9, with the last update.

    I added a 'text area' group to a slide. After validation of the entry, I would like to hide the whole group. I call it a group because you get the field and the Send button.

    I can't hide the field because I can give it a name and then refer to it in my Advanced actions. But I can't see the button submit as well, so I can't hide it.

    Did I miss something? Is there a work around known for allowing me to hide the Send button and the text input field?

    No, it's an object built in, which means that you can not solve, because there is no correct ID. In addition, you can add States either. I tried that as well. Embedded objects are very limited.

    I have however a workaround. It depends a bit on the used theme, but the Send button is often a text button. This is my workflow

    1. Because you cannot change the style of a button text, I replaced it with a transparent button.
    2. I did this totally invisible to the user transparent button: fill opacity = 0%, line width = 0 and remove the button caption (label).
    3. I created a text caption or a shape with 'Submit' and dragged under the TEB in the timeline panel. It is not necessary for the output SWF, but it's for HTML output. This text container has an ID and will be visible because the TEB button is completely transparent.
    4. When the user clicks on the button submit, I trigger a successful action that will be:
      1. Hide the text container (Submit)
      2. Mask of the ETB

    If you do this several times in a project, you can create a shared action.

  • Dynamic array, not filling, works very well with the test button

    I built a recordset object and tested with the Test button and the Recordset returns my data on my remote server.  I then put a dynamic array on my php page that it points to the recordset of this work and that the PivotTable is empty.  The table displayed in design mode correctly with the recordset.vcolname, but when running that data are not to be connected.  I even tried just drag a few pieces of data on and still no data.  Any help would be appreciated.  Have a great day!

    There are a lot of things I want to mention, but do not have the time to.

    I'll start with the fact that you are using soon be deprecated MySQL instead of MySQLi or PDO.

    Second, you can't have your markup in the head section of your document as in

    Third, none of the session variables will not work if you start the session after your conditional statements. In other words, session_start() should be at the top of your document.

    There is more, but lack of time prevents me from analyzing those.

    My advice is to start with my third point, which is to place the session_start() at the beginning of your document and see if that changes things.

  • [HELP] name of the symbol of EEG during execution of [version 20141]

    Hello world

    I would like to get the symbol 'current' name during execution.

    in the previous version, I get this information using the sym 'sym.getSymbolTypeName ()' function, but it doesn't seem to work on the new animated version of edge.

    Thanks for the help!

    Use sym.name as a workaround.

    This has been classified as a bug and will be available in the next version.

    Thanks for reporting this.

    HTH,

    Vivekuma

  • How to hide the Save button in the Panel of af: query to ADF

    Hello
    I've used ADF af:query component and to hide the Save button.
    Can someone help me please in the present.

    User, please tell us your jdev version!

    Af: query a saveQueryMode aproperty value that you defined in hidden.

    saveQueryMode="hidden"

    Timo

  • Hide the next button

    I know that people have posted answers to this question already, but I'm being really dim and do not understand them. I have a slide with 5 zones of reversal on this issue and I want users to have to ride on these before to move to the next slide so I want to hide the next button until what they looked at everything.   I had a look at the other threads and other sites on the net that explain this, but I've never used before advanced Actions and use only Captivate for about 6 weeks (this is the Captivate 5).  I tried to follow the instructions but I can't get it to work and to be honest I don't understand what I'm trying to do.

    Is anyone able to explain it really, really simply.  (Assume that I don't know, because I have probably not!)

    OK, so will try to give you a little help.

    • Create five text captions, label something as TC_1 TC_2, TC_3, TC_4, TC_5 and uncheck the visibility in the properties panel for the legends
    • Create five 'points' there are click on: either create you them as buttons (image buttons), or as boxes by clicking on an image, it is up to you. But do not forget to describe the interactive object (the click box or button) in the same way the legends of text. Example for click boxes: CB_1, CB_2, CB_3, CB_4, CB_5. This will make them easy to recognize who is related to what wording in advanced actions
    • Create the following button and uncheck its visibility in the properties panel. I would like to label it Bt_Next
    • Create a variable user v_counter; you can give an initial value of 0, but it is not really necessary, because it is the default

    Now the advanced actions, which is the most difficult part, because you need a conditional action proceeds by a standard action, which is a little confusing to reach. If you want more explanation, take a look at my article

    http://kb2.Adobe.com/community/publishing/862/cpsid_86254.html

    You need a tip for each area of click action, but you can duplicate and edit the first tip action I am describing now. I have it tagged the CB_1_ac to make it clear that it is triggered by some CB_1; this action will have 2 Decisions: first, she tagged ShowTC is a simulated standard measure that will display the text of the legend (or the image, I forgot to ask what you show), disables the present click box and increments the counter; the second, entitled CounterCheck is a real disease that checks the value of the counter and if it reaches 5 will show the next button; you use only the first page for each decision, not the ELSE part:

    This action must be repeated 4 times for stocks CB_2_ac... CB_5_ac. You need to change only the part of the Actions of the decision ShowTC to change TC_1 and CB_1 to TC_2... CB_2 etc.

    Then attach these actions to their click box, as success in the properties panel. Try it... I created this sample and it works very well.

    Lilybiri

  • AF:dialog - simpler to hide the Cancel button?

    Want to match some of what we have in a form application, and the dialog box is coming up closer than the panelWindow in terms of use, but I would like to be able to show just 1 button in the dialog for OK, rather than the 2 of them. I see the facet buttonBar on the component of the dialog box allows me to extend the buttons that are there, but I want to be able to hide the Cancel button. How this work normally/more-easily?

    Thank you.

    With the help of JDev 11.

    Button cancel any reasons to hide? What is the af:dialog type = "ok"? OR af:popup with a button?

  • I put 240 photos in an InDesign document using mini bridge.  Is there a way to hide the photos I used after I have put in my document?

    I put 240 photos in an InDesign document using mini bridge.  Is there a way to hide the photos I used after I have put in my document?

    I think Willi, and I even read your question differently. I thought you wanted to hide the images in Mini Bridge once they have been placed in InDesign so that you could keep track of those who you have (if you put twice the same image). If you want to hide in InDesign (as Willi read the question), his suggestion is very good. Another alternative is to use the shortcut to hide (command 3 on Mac OS), after putting the images, but before you click next to deselect them.

    I do not use Mini Bridge, so I can't help you there. If you want to use the full version of the bridge, you can use a Move command to move the selected items to another folder (temp), where they will not appear in your current folder. You can move after that that they all were placed. A bit of a hack, but it could work.

  • Hide the "submit" button when there is nothing to report

    Hello

    I have a simple command with a 'running total' good quantities ordered at the top of the form, (FormCalc) calculated as follows:

    the sum of $ = (Products.PRODUCT_GROUPS. DATA[*]. PRODUCTS. DATA[*]. Quantity)

    If this amount is zero (that is, nothing has been ordered) so I want to ban the form submitted by e-mail. I thought that the best way to achieve this would be to hide the submit button when this field is zero and show when > 0.

    I tried adding this code for the same event in this field to calculate:

    If ($ > 0) then

    Button1.presence = "visible".

    on the other

    Button1.presence = "hidden".

    endif

    but no go.

    Sorry if it's real simple, but I would appreciate the help!

    Thank you.

    When, in the code window, you will see that it says something about Ctrl + click for the SOM expression. So if in the event code for an item, you can press CTRL, then click on another point and it will insert the correct reference in your code. We must ensure that emphasis is placed in your code when you do and the mouse cursor will turn into a broad V.

    You can do a right click in the code window and select check the syntax of the Script to see if there are problems.

    When you view the form in preview, Ctrl + J opens the JavaScript debugger. It may need a config first in Acrobat. It has been a while since I put that up. Instead of making app.alert, you can do console.println and it will write in the JavaScript console. Occasionally, you may need to debug something dealing with the development and the app.alert itself affect the focus.

    Have you thought about putting your code preSubmit event and displaying a message that nothing has been entered? Also don't xfa.event.cancelAction = true

  • Hide the Global buttons

    Hi all I'm trying to hide the buttons global House using the direct code OADevguide

    Import oracle.apps.fnd.framework.webui.beans.nav.OAGlobalButtonBarBean;
    Import oracle.apps.fnd.framework.webui.beans.nav.OAGlobalButtonBean;

    OAPageLayoutBean page = pageContext.getPageLayoutBean ();

    page.prepareForRendering (pageContext);

    Buttons OAGlobalButtonBarBean = (OAGlobalButtonBarBean) page.getGlobalButtons ();

    Button OAGlobalButtonBean = (OAGlobalButtonBarBean) buttons.findIndexedChildRecursive "FND_RETURN_TO_HOME");

    button.setRendered (false);

    button.setDisabled (true);

    but getting error "incompatible types" during the compilation of the class for the line
    Button OAGlobalButtonBean = (OAGlobalButtonBarBean) buttons.findIndexedChildRecursive "FND_RETURN_TO_HOME");


    I tried with

    Button OAGlobalButtonBean = (OAGlobalButtonBean) buttons.findIndexedChildRecursive "FND_RETURN_TO_HOME");

    but it is throwing null pointer exception


    Watch OADevguide

    oracle.apps.fnd.framework.webui.beans.layout.OAGlobalButtonBarBean

    oracle.apps.fnd.framework.webui.beans.layout.OAGlobalButtonBeans.


    to import, but it is not there in importing in JDeveloper

    This Code works for me:

    OAPageLayoutBean page = pageContext.getPageLayoutBean ();
    page.prepareForRendering (pageContext);
    Buttons OAGlobalButtonBarBean = (OAGlobalButtonBarBean) page.getGlobalButtons ();
    If the Global buttons is not null.
    if(Buttons!=null)
    {
    for (int i = 0; i)< buttons.getindexedchildcount(pagecontext.getrenderingcontext());="">
    {
    OAGlobalButtonBean oaglobalbuttonbean = (OAGlobalButtonBean) buttons.getIndexedChild (pageContext.getRenderingContext (), i);
    {if ("ICX_RETURN_TO_PORTAL". Equals (oaglobalbuttonbean. GetName())}
    oaglobalbuttonbean.setAttributeValue (UIConstants.RENDERED_ATTR, Boolean.FALSE);
    }
    }
    }

  • Fill the programmatic view object during execution

    Hi all

    I have a requirement to switch between the three different data source during execution in a single page. The user interface and the field names are the same for these three cases, but data from various sources (queries).

    So, imagine that we have 3 objects in view which has implemented read-only (object request depending on the view) and we want to fill a display object at the main performance as a data source for my page.

    My idea is to use "Prgorammatic view object" for this data source and then fill dynamically the contents of one of the three objects view read-only based on a setting in the user's selection.

    First of all, I want to know if it is thin approach and if yes, then get some points on the implementation or any other sample.

    I found this example:

    http://techiecook.WordPress.com/2011/05/17/programmatically-populate-view-objects-in-Oracle-ADF/

    Thanks in advance,

    Nasser

    Hello

    It is more a case of use for Adaptive connections. See:https://blogs.oracle.com/groundside/entry/towards_ultra_reusability_for_adf

    You can use EL to change the name of the ViewObject that an iterator in ADF queries its data. If the switch is on the link layer and there is no need for programmatic view objects. Unlike in the article of the blog above, VO 3 exist in your case then you don't need to create on the fly. Just change the name of VO in the managed bean referenced

    Frank

  • Disable the TEST button in the console SOA 11 g Em

    Hi all

    I am using SOA 11 g (11.1.1.3 version). I have deployed some composites and wanted to test them. But in the em console web service test button is disabled. I don't see an option to test the web service when I right click on the composite.

    All the world is facing this problem. What I have to do all the new configurations. Note that it is a new 11g soa environment.


    Thanks in advance

    you have exposed a (soap) service in your composite? (dragging a component from the middle lane to the left lane swimming swimming)

  • Customize the bookmarks and the history button (using the sidebar)

    Hello

    I was wondering if there was a way to configure the bookmarks and history to open like a button sidebar instead of a menu drop-down. I've recently updated firefox to the latest version. In the old version I was using (I'm sorry, I don't remember version) bookmarks and the history button would open a side menu to the left of the window, that's what I'm trying to do.

    I know a shortcut and a drop down for this. I am also aware to be able to open the sidebar via the Bookmarks button, but it takes 2 clicks. I wonder if there is a way to simply open the sidebar with just 1 click of the button. Basically, the button is like Alt + B, I want to change it to be simply Ctrl + B in 1 click.

    Thank you.

    Nevermind, I found exactly what I was looking for with this addon.

    See here: https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/

  • The 'back' button, used to access a feature that formularies a brief history of the newest web sites. I don't find that in V4. Still exists in another format?

    In previous versions of FF there used to be a small arrow which, if you click on it, displays a history list. I can't find where this function is in FF V4.

    The arrow to open the history tab of the previous buttons and following was removed in Firefox 4.

    Use one of the following methods to open the tab history list:

    • Right-click on the back or next button
    • Press and hold the left button of the mouse on the active back or forward button until the list opens

    You can watch this extension:

  • Acrobat Reader DC: Hide the Browser buttons

    Hello

    I want to deploy Adobe Reader DC 400 work stations, but I want to hide or disable the left column, with the buttons of the browser. Someone knows how can I do it please? I tried to change the registry, but nothing works.

    Thanks for your help2016-04-13_11h17_40.png

    Hi davidg44164206,

    You can try referring to this thread: reader XI - how to hide the default Navigation pane?

    It is for reader XI, you can try the parameter given in the thread for reader DC registry.

    Also wishes to inform you take a backup of the registry beforw not change it by accessing the file > import.

    Let me know if it helps.

    Concerning

    Sarojini

Maybe you are looking for