High CPU usage while browsing with flash content more

I know that this can cause a several times but still problem persists even after the rest of most of the stages (analysis of malware, disabling content flash etc.). MY model is certainly an old one 910 series motherboard intel with onboard graphics card intel 128 MB running windows xp professional service pack 3. I have recent changes to the system, but that it faces from the 1 of the past month, I started. Flash games used to work properly without lag and without using a lot of CPU, but for a 1 month, he started late as * and CPU spikes almost at 100%, while the jumps game and even during web browsing with flash content and decreases rapidly after you load the page completely. I tried to disable hardware acceleration but still problem. Hope that I find the solution earlier. Thanks in advance.

Hi Vijay,

  1. Exactly how you try to play the games? Games online or offline?
  2. If you are referring to online games so what web browser are you using to play the games?

If you use internet Explorer, then, refer to the following.

When you browse a Web page in Microsoft Internet Explorer, the CPU usage meter in Task Manager may indicate 100% CPU usage. Because of this behavior, other programs may slow down or crash. For example, if you read a video DVD, an audio DVD or audio CD while you scroll through a Web page, you may strain video or audio.

This problem may occur on some computers if the option of scroll smooth use is enabled in Internet Options.

Note By default, the use smooth scrolling option is enabled in Internet Explorer.

To work around this problem, disable the option of scroll smooth use in Internet Explorer. To do this, follow these steps:

(a) click the Start button and then click Control Panel.

(b) in the Control Panel, make sure you are in Classic view, with all the control panel display icons. If this is not the case, click switch to Classic view in the left pane of the control panel.

(c) click Internet Options to open the Internet Options dialog box. Click the Advanced tab and scroll down to the settings: navigation on topic. Select or clear the Use smooth scrolling check box.

(d) click OKand then click the close button.

http://Windows.Microsoft.com/en-in/Windows-XP/help/turn-off-smooth-scrolling

Please post back with the State of the question.

Tags: Windows

Similar Questions

  • Get the warning from Norton to high CPU usage while watching YouTube XP

    After you have installed norton anti virus through my quest provider. I started to receive warnings from high c p u when I Watch youtube and other programs of this nature. What it means and how to fix the c p u?  I am running windows xp family. Thank you.

    Hello

    1. could you give us the exact message?
    2 do you have over clocked CPU?

    Check to see if the problem exists in the boot. May be another application is at the origin of the conflict. You need to perform a clean boot to find the program that is causing and then disable or remove.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353/en-us

    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • problem with high CPU usage audiodg.exe

    While playing the game, I get a message saying that I raised the CPU usage 99% of the base. This is caused by "audiodg.exe. I tried a few bugs that I found online. I was told that they would not work with my computer. I have a Dell XPS15 second-generation i5. Has anyone experience this problem?

    Hello

    1. what you did to solve the problem?

    audiodg.exe [Windows Audio Device Graph Isolation] file hosts the audio engine for Vista and Window s 7.

    All DSP [Digital Signal Processing] and audio processing is done within this file. Suppliers are able to install their own audio effects and DSP in the audio pipeline, which is then processed by audiodg.exe

    In order to correct the high CPU usage, disable audio enhancements addressed by the file audiodg.exe. To disable the audio improvements, follow these steps:
    a. right click on the speaker in the lower corner icon right.

    b. Select the playback device from the menu. A list of devices should appear on the screen.

    c. double-click the device that has a green check mark. The properties for the device windows should open.

    d. click the improvements at the top.

    e. in the list of improvements, uncheck all the, or check Disable all improvements.

    f. click on the OK button to save your changes and close the window.

    g. click OK to close the devices window of reading.

    I would also say that you use resource monitor to monitor the CPU usage.

    Resource monitor is a tool that allows you to analyze the use of the CPU, disk, network, and memory in real time.

    You can use the performance tab in the Manager of tasks to see how the CPU of your computer is used by Windows and other programs running on your computer.

    Reference:

    See use of CPU utilization and other performance information

    http://Windows.Microsoft.com/en-us/Windows7/view-CPU-utilization-and-other-performance-information

  • Flag 23: Dealing with "high CPU usage." How can I reduce this?

    Hi, I have a HP Pavailion 23 which has been given to me as a gift. Therefore, I don't know. All I know is I'm a player who likes to play games based on Java and possibly watch the videos at the same time, when I try to do the lagg is important. I get notifications saying that Chrome has high CPU usage. I read something about changing my BIOS settings? I'm not sure.

    I would appreciate help on this. I have dealt with the hand of single task Forcers and I find it quite annoying.
    Thank you!!

    Geez... No love. ?

  • DAQmx read results 2 ms/s in high CPU usage

    I have an application that reads the 32 channels of 2 ms/s analog input signals, at the same time. The actual hardware will be: SMU-8135 Win7, chassis SMU-1071, 2 x SMU-6368 (16 channels). The SMU-two 6368 will provide 32 channels data acquisition.

    I don't have the material at the moment, but I've been estimate the processor on the alternative configurations needs, because I have concerns about the use of the CPU to data acquisition high speed. Two alternative configurations are:

    (1) SMU-8133 (quad core) WinXP, SMU-1062 q, PXI-6133.

    (2) PXI-8106 (dual-core) WinXP, PXI-6133, PXI-1042.

    Note: PXI-6133 supports high speed HAVE 2 ms/s, at the same time.

    I wrote a simple continuous data acquisition software to allow me to compare the CPU usage. The sample rate and the number of channels are configurable. What I found is:

    (1) at low sampling frequency, for example 100 kech. / s, the CPU usage is minimal on both configurations (bicoeur or image), regardless of the number of channels is 1 or 8. The reading of the CPU was about 1-4%

    (2) at high sampling frequency, for example 2 ms/s, what is the number of channels used, either 1 or 8, the CPU utilization was 50% for dual core and 25% for the quad core, IE. a full core has been fully utilized.

    (3) the passage of the low use of the processor (<5%) to="" high="" cpu="" usage="" (="">45%) increases when the sampling rate is rather steep and shows interesting channel-dependence (note the following has been achieved with a PXI-8106 controller, dual-core).

    • @1 channel, it happened between 950 to 970 k
    • @2 channels, it happened between 470 to 480 k
    • @4 channels, it happened between 230 to 240 k,.
    • @8 channels, it happened between 120 to 130 k.

    This model reminds me of buffer length related question but I double checked a sufficient length of the buffer was used. He suggested also, surprising a few traffic jams occurred when the amount of data increases up to certain level.

    My question is, is this a problem with this particular card (PXI-6133) or driver DAQmx (9.5.5f4). How the problem is when I'm doing an acquisition of 32 channels?

    For your information, I have attached the benchmarking software.

    Thank you!

    Donghui Yin

    I followed this example code (see link below) and used based on events DAQmx, now the excessive CPU utilization problem has been resolved. Playback from the CPU is now less than 10 percent, while it could be 50% (in the case of dual-core) or 25% (case of hearts) at the same sample rate and number of channels.

    http://zone.NI.com/DevZone/CDA/EPD/p/ID/5911

  • searchindexer.exe extermemly high CPU usage - days

    Not sure that to do, I rebuilt the index, manually deleted the record of data to index, completely removed, rebooted, and then reinstalled Windows Search from the Add/Remove Windows features, I also chkdsk/f had my records.

    When the Searchindexer.exe uses as much CPU as she can I checked with resource monitor and it is not read to leave or by writing to all files, just chip away cycles CPU.

    Edit: more information

    I created a dump of the searchindexer.exe and its opening with a debugger tool, it is the content

    Microsoft (R) Windows debug 6.2.9200.16384 AMD64 Version
    Copyright (c) Microsoft Corporation. All rights reserved.

    Loading dump file [S:\Tools\SearchIndexer.exe.dmp]
    User Mini with full memory dump file: only application data is available

    Symbol search path is: * invalid *.
    ****************************************************************************
    * Loading of the symbol may be unreliable without a symbol search path.           *
    * Use .symfix to get the debugger to choose a symbol path.                   *
    * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
    ****************************************************************************
    Executable search path is:
    Windows 8 Version 9200 MP (8 procs) free x 64
    Product: WinNt, suite: SingleUserTS
    By: 6.2.9200.16384 (win8_rtm.120725 - 1247)
    Computer name:
    The debugging session: Sun Nov 4 22:01:24.000 2012 (UTC - 07:00)
    System Uptime: 0 days 10:09:39.102
    Running time: 0 days 0:54:31.000
    .........................................................
    Loading unloaded module list
    ..........
    ERROR: The symbol file is not found.  Defaulted to export symbols ntdll.dll.
    ERROR: The symbol file is not found.  By default for exporting symbols for KERNELBASE.dll -.
    ntdll! NtWaitForSingleObject + 0xa:
    000007fc ' ret 5b172c2a c3

    also, I checked the thread problem in hacker process, here is the stack:

    0, ntoskrnl.exe! SeAccessCheck + 0x1ef
    1, ntoskrnl.exe! KeDelayExecutionThread + 0xc32
    2, ntoskrnl.exe! KeWaitForSingleObject + 0x1cf
    3, ntoskrnl.exe! _misaligned_access + 0 x 809
    4, ntoskrnl.exe! SeAccessCheck + 0 x 280
    5, ntoskrnl.exe! SeAccessCheck + 0x4d1
    6, korwbrkr.dll! DllUnregisterServer + 0x2f48
    7, korwbrkr.dll! DllUnregisterServer + 0x243e
    8, korwbrkr.dll + 0 x 12173
    9, korwbrkr.dll! DllUnregisterServer + 0 x 1696
    10, korwbrkr.dll! DllUnregisterServer + 0x62f9
    11, korwbrkr.dll! DllUnregisterServer + 0 x 6117
    12, korwbrkr.dll! DllUnregisterServer + 0x5db9
    13, korwbrkr.dll! DllUnregisterServer + 0 x 5882
    14, korwbrkr.dll! DllUnregisterServer + 0x6fa0
    15, mssrch.dll! DllGetClassObject + 0x3feba
    16, mssrch.dll + 0 x 19425
    17, kernel32.dll! BaseThreadInitThunk + 0x1a
    18, ntdll.dll. RtlUserThreadStart + 0x21

    I also deleted my Outlook data files and started from scratch with my emails, and makes sure the data folders are not on a concert.

    I installed all the updates that are available for Windows 8 and I also ran sfc/scannow.

    I would be grateful if anyone could offer any help at all, thank you.

    Hi entire,

    disable the service in the Services, restart the computer and then re-enable the service.

    I tried, I completely uninstalled from Windows Add/Remove Features service, rebooted the PC and re - he added, and same deal.

    Anyway I found is what the problem is, it's the korwbrkr.dll, it seems to be related to a Korean dictionary, as if the indexer is you are trying to index something with characters Koreans inside (not aware that I have something like that), and he throws a loop for I renamed the korwbrkr.dll to korwbrkr.bak and it has linked the dictionary file and removed from the search index and I allow the indexer to run all night and it shows that indexing is complete, and I have no more high CPU usage.

    I was dealing with high utilization of the processor of the indexer for weeks, now my system is at peace.

  • BSOD while browsing with Chrome - Crash address ntoskrnl.exe + 5 has 440

    Hello, everyone. My laptop Dell Inspiron 1425, and the operating system is Windows 8 64-bit.

    These two days I get a blue screen while browsing with Chrome. So far, it's happened three times. Minidump files, we can see that the drivers that caused them are different, but their address of accident are the same: ntoskrnl.exe + 5 has 440. And each one happened when I was browsing with Chrome, I think they are relevant. Here's my Minidump files:
    https://SkyDrive.live.com/redir?RESID=77106B4AC1BE0CA8! 10830

    Thank you for your help :)

    Hello

    We have two bugs attached landfills here:

    DPC_WATCHDOG_VIOLATION (133)

    Bug DPC_WATCHDOG_VIOLATION control has a value of 0 x 00000133. This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above. The value of parameter 1 indicates whether one single DPC exceeded a timeout, or if the system is cumulatively spent a long period of time IRQL DISPATCH_LEVEL or higher.

    I notice you have installed Norton. I will recommend to temporary troubleshooting purposes remove you Norton and replace it with built-in Windows Defender from Windows 8.

    Norton removal tool - ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    If the removal and replacement of Norton do not help, the second error checking is:

    VIDEO_TDR_FAILURE (116)

    The basic definition of a bugcheck 0 x 116 is:

    There may be a bug in the video driver or video material.

    So I would now explain what means VIDEO_TDR_ERROR. Firstly, TDR is an acronym for Timeout detection and recovery. Detection time and recovery was introduced in Vista and carried over to Windows 7. Rather than exactly what detection time and recovery did exactly, I'll just quote the MSDN article!

    Timeout detection:

    Planner of the GPU, which is part of the DirectX Graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU takes more than the amount of time to perform a particular task. The GPU scheduler then attempts to anticipate on this particular task. Preempt is a timeout 'wait', which is the actual time of TDR. This step is the detection of delay of the process phase. The period of default timeout in Windows Vista and later versions is 2 seconds. If the GPU cannot complete or anticipate the current task period TDR, the diagnostic operating system that the GPU is frozen.
    To avoid detection of timeout to occur, hardware vendors should ensure that graphics operations (i.e. buffer DMA completion) will not take more than 2 seconds in scenarios such as productivity and the game to the end user.

    Preparation for recovery:

    The operating system GPU Scheduler calls the function DxgkDdiResetFromTimeout of the miniport driver of the display to inform the driver that the operating system detected a timeout. The pilot must then resets and reset the GPU. In addition, the driver must stop access to memory and go not material. The operating system and the driver collect material and other State information that might be useful for post-mortem diagnosis.

    Recovery of funds:

    The operating system resets the State appropriate graphics stack. The video memory manager, which is also part of Dxgkrnl.sys, serving all allocations of video memory. The miniport display driver resets the State of the GPU hardware. The graphics stack takes the final steps and restores the receptive office. As mentioned previously, some older DirectX applications could make only in black at the end of this recovery, which requires the user to restart these applications. Well-written 9Ex, DirectX and DirectX 10 and subsequent applications which manage peripheral technology delete continue to function correctly. An application must release and then recreate the Direct3D device and all the objects in the device. For more information on how get the DirectX applications, see the Windows SDK.

    Article here.

    That being said, if the detection time and recovery fails to retrieve the display driver, it will then pull the bugcheck 0 x 116. There are many different things that can cause a 0 x 116, which I'll explain below:

    The following hardware problems may cause a TDR event:

    1 unstable overclock (CPU, GPU, etc.). Return any overclocks to stock settings.

    2 bad sector in memory, resulting in corrupted data is communicated between the GPU and system (memory video, otherwise known as VRAM or physical memory, also called RAM).

    GPU tests: Furmark

    RAM test: Memtest86 +.

    3 corrupt hard drive or install Windows / OS install resulting in corruption in the registry or the page file.

    HARD drive Diagnostics: http://www.carrona.org/hddiag.html

    To reset your swap file, follow these steps:

    (a) go to start... Run... and type "sysdm.cpl" (without the quotes) and press ENTER.

    -Then click on the Advanced tab.
    - then the Performance Settings button.
    - then on the tab advanced following.
    -and then click the virtual memory button.

    (b) in this window, note the current settings of your swap file (so you can restore them later).

    -Then click on the option button "No paging file", and
    - Press the Set"" button. Don't forget, if you have several hard drives, make sure that the paging file is set to 0 on all of them.
    -Click OK to exit the dialog boxes.

    (c) restarted (this will remove the file from your system)

    ((d) then go back following the directions in step one) and re-enter the settings that you noted in step

    (b) follow the steps along the (and including) the reset.

    (e) once you have restarted this second time, go back and make sure the settings are as they are supposed to be.

    Run the System File Checker:

    SFC. EXE/SCANNOW

    Click on start and type "cmd.exe" (without the quotes)

    At the top of the search box, right-click on the cmd.exe and select "Run as Administrator"

    In the black window that opens, type "SFC. EXE/scannow"(without the quotes) and press ENTER.

    Let the program run and after return what he says when it's done.

    -Overheating of the CPU or GPU and or other elements can cause 0 x 116 bugs. Monitor your temperature and ensure that the system is sufficiently cooled.

    -GPU failure. Whether the heat, power (PSU) issue, lack of VRAM, etc..

    The following software issues can cause a TDR event:

    -Incompatible drivers of any kind (two GPU, sound, etc)

    -Messy registry / corrupted

    -DirectX bad files (uninstall and reinstall DirectX)

    -bad system files (System File Checker - has been run on it)

    -Bad driver (some drivers will cause an event due to internal bugs, but they are not nearly as common as many think because of all the previous things, causing the same symptom) - (remove all 3rd party programs and make sure that are not load drivers. Then install only what you need 3rd party stuff and make sure it is the latest version).

    Kind regards

    Patrick

  • TimesTen 11 g - direct connection jdbc get very high CPU usage

    Hi guys,.

    When I run my application with a direct connection, I get very high CPU usage... Can help me where can I fix this.
    This is the configuration I have.

    PermSize = 102400
    TempSize = 2457

    More, should one I include the LogBufferSize? How much should I put in it?


    Thank you

    John

    Well, the point to keep in mind is that overall CPU utilization will not higher with direct mode with a local server. In fact, it will be a little weaker because of the much higher efficientcy of direct mode compared to client/server mode.

    The usual rules apply here; You must decide on the maximum use of your machine (normally one trying to limit it to)<=60% for="" the="" most="" optimal="">

    Then you need to see how your workload uses the CPU. with TimesTen there is no blocking operation within the database for a single application thread can, if it does not crash on all external events such as queue of messages, etc. I/O, usually consume a whole CPU core (a large volume of work in the process of transformation). If he asks you to this nature then you want to limit the number of concurrent threads to the smallest reasonable number. Assuming that the machine is running just the application and TimesTen and nothing else and that you wish to leave a carrot free for activity of DB o/s and the background (for example, journal of hot flashes and checkponting) then optimal throughput and response time will be reached with three concurrent threads hitting the database. You can run course with wires more than that but the flow will not be increased (in fact it will decrease somehwat due claim etc.) and response times will certainly increase. For this application profile you certainly wouldn't want to use more than 8 simultaneous maximum son.

    At the other extreme is an application that has multiple concurrent threads, but where each thread spends much of its time waiting for some work to do and runs only makes for a short period of work process then returns to the wait. You can use several more concurrent threads than the hearts of processors for this application profiel. The optimal number will be determined by the specific workload, load CPU it generates and your maximum target of use of the system.

    None of this is really specific TimesTen. The main differences that TimesTen brings all this are:

    1. the workload of database now works on the same machine as the application rather than on a server separate from the DB so that it consumes resources on the application computer.

    2. in general, database interactions will result not in any idle time from a point of view CPU usage (as a consequence of (1) above).

    Ideally, your request will be designed and implemented so that the number of concurrent threads can be controlled as a parameter tunbable to allow you to adjust the workload generated by the application to the specific environment in which it runs.

    Chris

  • Qosmio F60 - alert constantly high CPU usage

    Hello

    About 12 months ago, I bought a Toshiba Qosmio F60 computer laptop 6 GB.

    When exploring using games, facebook etc, I am constantly alert of my Norton informing that there is high CPU usage.

    I have asked around locally and advised to delete Norton because this may be the problem. I'm not eager to do what my subscription is still valid.

    I also learned the other day that this is a common problem with laptops Toshiba using 'Explorer' and that I should use "Mozilla Firefox" instead which would correct the problem.

    I am trying to arrange this.

    Can you please indicate if it is a regular problem with Toshiba laptops and reviewing the options above to try to address this problem.

    It doesn't really seem to my computer, it goes more slowly and when in the Manager tasks, it is constantly fluctuating between 5 and 35%

    I look forward for your reply.

    Thank you

    Melissa

    Hello

    This isn't a problem laptop buddy
    Norton AntiVirus is a good antivirus program, but it uses a lot of resources and my experience locks the CPU.

    I removed this antivirus software and now I m using the avast and Avira Antivir free Antivirus software. Both are freeware software.

    But I still use Internet Explorer. Of course, I also installed the firefox and chrome. All these three browsers are great.

  • High CPU usage by "System outages" and missing keystrokes in IE on all new HP laptop 15-r085nd

    I recently bought a HP15-r085nd (Win 8.1 with Bing), and right out of the box, I encountered this problem:

    After the awakening of the mode (usually after the first time to wake from sleep mode, but always after the second time), the process "System outages" has high utilization of the processor, up to 45%. The laptop then responds very, very slow. In addition, in Internet Explorer (but only in Internet Explorer, it seems!) strikes are missing out.

    I tried the following:

    -Implementation of all the updates of Windows, all McAfee updates and all of the updates from HP Assistent. No results.

    -Reinstall all the drivers, no results. Windows system restore: no result. Factory reset the recovery partition: no result. Then implemented all the updates again: no result.

    -J' tried to use Microsoft Xperf to diagnose the problem: it seems wdf0100.sys to blame for the high CPU usage. (In other words, if I have interpreted the results in the right way).

    -J' then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task Manager and disable all non-Microsoft services in msconfig. The result was that the high CPU usage of "System interrupts" occurred less frequently after the first time out of the way 'sleep', but still she always had after the second time to wake off mode 'sleep'. Uninstallation of McAfee seems to have the same effect, by the way.

    -J' then did some troubleshooting with the store were I bought it. They used a pilot program to install newer versions of the drivers. Also, in vain.

    Then they gave me another laptop of the same model (r085nd). It had exactly the same problems. So I think that all laptops of this model have the same problem! Does anyone know of a similar case with a laptop similar?

    -J' then did some troubleshooting with HP support. We have updated the BIOS (F.24), without result. We have made a few updates to additional drivers on the HP site, no results. We wanted to update the graphic driver Intel HD (sp65598), but we couldn't install it, an error message saying: minimum system requirements were not satisfied.

    I hope that the HP support can arrive at a solution (they wanted to deepen this). If so, I'll promise to post it here, because it affects probably other r085nd HP as well.

    In the mean time, I'd appreciate any suggestions, because I'm totally confused now. Someone at - it ideas? I will answer all the answers!

    I was contacted by HP Support again. After a new series of updates which included some updates everything new on the site of HP is solved the problem with high CPU usage by "system outages"!

    We have done several updates, so I know not that exactly solved the problem, but it is those:

    -New firmware BIOS: version F.33 (my bet would be that is the one that solves the problem)

    -New Intel chipset driver: 1.20 (sp69575.exe)

    -New driver Intel HD Graphics: 1.20 (sp69589.exe): 10.18.10.3958 (this one tried earlier, without solving the problem)

    -New driver Realtek card reader: 1.20Ap3 (sp69610.exe)

    I hope this helps other people with the same problem.

    Thanks to the HP Support team for their help with this problem!

    Moreover, the problem of lack of strikes in Internet Explorer (more use of CPU (any reason), the sequences of keys more are not registered!) still exists! I work around this problem by using Google Chrome. Again, I hope that this issue might get resolved as well! I nevertheless marks it as "Resolved" as the main problem is resolved.

  • Cisco 4506 high CPU usage

    Hello

    Yesterday afternoon, one of our 4506 switch has climbed to 96% CPU usage. I did not the configuration changes. Here is the process with high CPU usage

    40 36630921841089949084 3360% 8.63% 10.56% 11,29% 0 Cat4k Mgmt HiPri

    41 30929587802851505705 1084 36,61 36,53% 36.18% 0 Cat4k Mgmt LoPri

    76 72485492 270422107 268 entry IP 7.91% 7.72% 7,68% 0

    113 35661224 40030007 890 21.91 28.13 29,84% 0 DHCPD receive

    After having HS health platform, what are those high:

    S2w-JobEventSchedule 10.00 7.54 10 8 100 500 9 9 7 36703:06

    Stub-JobEventSchedul 10.00 12.23 10 48 100 500 12 12 9 51004:51

    K2CpuMan review 30,00 29,44 30 99 100 500 33 32 25 37067:58

    K2AccelPacketMan: Tx 10.00 12,15 20 1 100 500 12 12 10 11871:22

    And finally sh platform cpu packet statistics gives me this

    Packets dropped in hardware by CPU Subport (txQueueNotAvail)

    UC Subport TxQueue 0 TxQueue 1 TxQueue 2 TxQueue 3

    ------------ --------------- --------------- --------------- ---------------

    0 11045 14031 149981 188579662

    1               0               0               0         5919279

    2               0          115638               0               0

    RkiosSysPacketMan:

    Falures allowance package: 0

    Package (common software) buffer allocation falures: 0

    Package Buffer (software ESMP) allocation falures: 0

    Package Buffer (software EOBC) allocation falures: 0

    Falures IOS Packet Wrapper buffer allocation: 0

    Packets dropped in the overall treatment

    Total 5 s 1 min, 5 min 1 hour avg avg avg avg

    -------------------- --------- --------- --------- ----------

    146521131 0 0 0 0

    Packets dropped in treatment by event CPU

    AVG s Total 5 1 min, 5 min avg avg avg 1 hour event

    ----------------- -------------------- --------- --------- --------- ----------

    Input Acl 146002289 0 0 0 0

    SA Miss                             27         0         0         0          0

    Packets dropped in the treatment of priority

    AVG s Total 5 priority 1 min, 5 min avg avg avg 1 hour

    ----------------- -------------------- --------- --------- --------- ----------

    Normal 46723179 0 0 0 0

    Medium 518884 0 0 0 0

    High 99797883 0 0 0 0

    Packets dropped in the treatment of the reason

    AVG s Total 5 reason 1 min, 5 min avg avg avg 1 hour

    ------------------ -------------------- --------- --------- --------- ----------

    SrcAddrTableFilt 24 0 0 0 0

    L2DstDrop                             7         0         0         0          0

    L2DstDropInAcl 46 0 0 0 0

    NoDstPorts                           32         0         0         0          0

    NoFloodPorts 146521022 0 0 0 0

    The package 16 total queues

    Packets received from the packet queue

    Total 5 s 1 min, 5 min 1 hour avg avg avg avg queue

    ---------------------- --------------- --------- --------- --------- ----------

    6279742115 238 247 203 193 ESMP

    L2/L3Control 1320811357 57 48 43 41

    Host of learning 24933459 1 0 0 0

    L3 Fwd Medium 5813 0 0 0 0

    L3 Fwd Low 72923122 0 0 0 0

    L2 Fwd high 11130 0 0 0 0

    L2 Fwd Medium 164016 0 0 0 0

    L2 Fwd 242645408 227 237 193 185 Low

    L3 Rx High                           9         0         0         0          0

    L3 Rx 89296999 439 461 378 364 Low

    Failure of the RPF 129420 0 0 0 0

    Packets dropped packet queue

    Total 5 s 1 min, 5 min 1 hour avg avg avg avg queue

    ---------------------- --------------- --------- --------- --------- ----------

    L2/L3Control 18470371 0 0 0 0

    Host of learning 5825831 0 0 0 0

    L2 Fwd Low 405210 0 0 0 0

    L3 Rx Low                         9863         0         0         0          0

    I will be restarting the night switch to see if it helps.

    Thank you.

    Salman

    Hello Salman,

    If DHCP requests are taken over by clients, you will probably want to focus on the limiting of requests DHCP using DHCP snooping.

    ip dhcp snooping limit rate rate

    http://www.Cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/65591-Cat4500-high-CPU.html#high_cpu

    http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst4500/12-2/25ew/configuration/guide/conf/DHCP.html#wp1073418

    -Ginette

  • RdrCEF high CPU usage

    Hello.
    First of all, sorry for my weak English level.

    A few days ago, I installed Adobe Reader DC on all servers of my Citrix XenDesktop 7.6 farm. All started well, but now I have problems with high CPU usage. I have seen that for each user using reader DC open between 1 and 3 processes with the same name, RdrCEF.exe. This process consumes a lot of memory and sometimes, according to the PDF file, use a large part of the performance issues causing CPU in other sessions on the server user.

    What is the process of RdrCEF? Phy it's open several times by user ? And above all, how can I prevent the use of this process as much CPU?

    I hope someone can help me.
    Thank you.


    Hi all

    We fixed these issues with our last update. I ask you all to update via Help Adobe software-> check the updates...

    Please let us know if you face this or any problem after update.

    -Thank you

    Sunil Soni

  • Time of loading very very very slow (Firefox and explore) with Flash content

    Yes Details:

    Professional Win7 64 bit

    Flash Player version: 11.1.102.55

    Problem:

    With the two browsers (Firefox and Explorer, the latter with 32-bit and 64-bit versions) it is impossible to use the web pages with Flash content, cause the loading time is too large (more than a minute) and during this time, the browser seems frozen.

    He began to arrive after the last cause upgrade to Flash version for a long time, I faced a strange behavior: whenever I rebooted the PC, a window with the request to update Flash appeared, and even I did the upgrade, the next time that I restarted the window appeared again. so after a lot of this, I decided to switch to the latest version available.

    But now, I had to disable the Flash option in the two browser for surfing the web, otherwise it's impossible to do.

    Can you help me???

    p.s. I already tried to uninstall everything with Adobe scripts, I also uninstalled Explorer and Firefox and installed everything again, but nothing!

    How to do a clean install of the Flash Player?

  • Prevention of Internet Explorer to the visitors of the sites with Flash content

    As the most recent versions of Internet Explorer are out, Microsoft has subtly, but effectively provided a barrier for visitors of the sites with Flash content. If you use IE, when you move to an embedded Flash object, IE force visitors to click once before the user can interact with the embeded object. What is important, the event listeners do not seem to work reliably until control is "activated" by the user click.

    But when I use IE to browse the Adobe site, IE is silent, and Flash objects work as expected without prompting me to 'turn on' everything I have fly over. I know that Adobe is a heavy user of .swfs on their site.

    The question is: what special code is included in the pages of Adobe to effectively neutralize obstacle IEs? Adobe already has a fix for this annoying problem of IE, I'm amazed the fix is not more widely spoken or communicated to hundreds of millions of users of Flash, or perhaps, I not looking in the right places.

    Kind regards

    a

    Firstly this fix is widely known and a simple search on this forum would have given you your answer. But just go here...

    RER.html http://explorinlauren.com/Repository/Flash/Fixing-the-Flash-Embed-issue-for-Internet-explo

  • WIN8.1/Chrome 64 bit: NPAPI Flash Player crashes on pages with Flash content

    Hello

    Chrome 64 bit (beta +) crashes on 64 bit Win8.1, if I use the reader Flash NPAPI (beta or stable v14 v15) and open a Web site with Flash content.

    More details here:

    https://code.Google.com/p/chromium/issues/detail?ID=402262

    Great to hear.  Looks like it has been resolved on the side of Chrome.

    My understanding is that NPAPI turn off by default in Chrome soon.  Yet once, PPAPI Flash Player has matured greatly at this stage.  If you always use questions that make the superior NPAPI Flash Player for your use case, we talk about them.  The goal is to have the plug-ins to parity and the window to have an NPAPI option closes quickly.

    Thank you!

Maybe you are looking for

  • Qosmio Q50-10 - need info on brightness on power electric battery

    I'm looking for someone who has the QOSMIO Q50-10 to check the information on the low light that appears whenthe computer is running on battery and after that we're going to restart windows without mains. I use FN + F7 I looked in power options, but

  • Safari, crazy

    Today, Safari on my iMac went nuts. In the search bar, there are two ' search or enter us site name ', with the other having only the magnifying glass symbol before text: I also can't ad text in the search field. This has happened before installing t

  • N020ca Pavilion: pavilion n020ca ram upgrade

    I want to install new ram but do not know what my computer needs. I have searched all over the site of HP but can't find ram info. Don't know I have a 2 GB and 4 GB installed but want to install at least one new stick 4 GB but want to buy the right t

  • Don't know the password to access Outlook Express

    original title: How can I change the password for Outlook Express?  I can't, and I do not know the current password. I cannot access my outlook express and do not know the current password.  I can't understand how I can change it without knowing the

  • Help! Error loading BatlogEx.dll

    Dear Forum, Could someone tell me please how to restore this file or advise the best course of action? Background: While the T43 was on the Windows logon screen and the loading up, I (stupidly) unplugged the power cord from my TP43 without a battery