High speed FPGA for MyRIO personality

Similar Questions

• High-speed FPGA personality my Rio

  Hello

  I started on a Rio My 1900 I am programmer in C language so without by Ferryman Labview.

  I wish I could sample a signal to a frequency higher than those possible with the standard personality FPGA provided. The doc of the RIO my dt requires high-speed FPGA personality it takes to download the site of NI I therefore downloaded but son installation requires labview 2014...

  How can I do?

  Thanks in advance for your help.

  Françoise

  Hello

  To change the FPGA, USE of it requires LabVIEW and FPGA module. You can only use the default personality pour en C development.

  Kind regards

• high-speed FPGA multipliers

  When should you use these multipliers rather times ordinary? Is it disadvantages if these using ie do take several doors to implement?

  What additions to broadband?

  Thank you

  You might find this link from the help information: use of Math functions high speed

  In particular: "National Instruments recommends to use the LabVIEW digital unless you need the benefits that offer the features high-speed mathematical."  I don't know if there is a sentence any for use when not not required.  For additions and multiplies, the main advantage for high-speed operations, is that you can more easily control the pipelining when executing a series of mathematical operations. (EDIT: but if you don't need math pipeline, there is no advantage.)

• Turn on high-speed 3G for X 300

  I searched how to activate the Option of 3 G Broadband for X 300 but I couldn't understand the schema described in http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_software/thinkpad_3g_broadband.pdf

  If anyone can help?

  Thank you

  Ok.

  The two most valuable resources for you are the X 300 manual hardware maintenanceand training videos. They, as well as the patterns you've already found, will help you make sure that card and antenna cables are properly installed.

• NEITHER 9213 changing high resolution at high speed. Screenshots included.

  Hello

  I have a card 9213 in a CRIO-9074. My sampling rate is exactly 1 s/s, which means that it is running in mode high resolution. However when I go in the project window and change it to high speed (as indicated below)...

  

  nothing happens. Remainders of 1 s sampling rate / s. below you can see my labview vi, which is a timed loop. The period can be changed in the loop is only how many samples I trace on the graph. And as you can see on the graph to 100ms graphic flatlines as the 9213 is not updated of its value.

  

  Below you can see the record of the following data and it shows that the sample time is exactly 1 s/s.

  

  So, how can I actually get my 9213 OR change of 1 s/s mode high resolution at the 75 s/s, that it is rated for mode high speed. For this initial Setup, I use only 1 thermocouple, but once I get the included sample rate I'll add more. It should also be noted that I rebooted the computer and the Committee for the acquisition of data several times.

  Thank you.

  I noticed that in your project beside the cRIO, he says "in time real features not available."  According to another thread, I found, it was because the module time real wan not properly installed:

  http://forums.NI.com/T5/FieldPoint-family/real-time-features-not-available/m-p/954231

  Also, when I recreate your project settings, if I right click on the 9213 module I the ability to "Deploy" or "deploy all.  Deployment is expected to update the settings.

• By axis high speed capture using UMI-7774

  Hello

  I want to use capture high speed on each axis of my pci-7344 Controller.

  I use UMI-7774 and evrything is correctly connected to the command of servo etc...

  I read the manual of the umi-7774, but I see nothing on the capture trigger high-seed.

  How do I use the signal high speed capture for axe1?

  What are the necessary wiring to the umi-7774 to use this signal?

  Page 3-25 in the Manual: "the UMI-7774/7772 has one 15-pin D - SUB connector you use to.

  wiring output input trigger and breakpoint. This connector allows access

  to trigger four inputs and four outputs of breakpoint. "

  is that the breakpoint TRIGGER connector in the Global connectors of the UMI has this signals for each axis?

  Thank you

  MOR

  Mor,

  I don't think that it is possible to route multiple signals on the same line of the RTSI, because that would mean that even if a signal is high, other signals take on the same line in a low state. I think that you will use for OR external logic circuits indicates the breakpoint.

  Jochen

• Problems with mathematics at high speed on FPGA

  I'm new on fixed-point numbers and math at high speed on the FPGA. I use the 7962 with 5751 adaptation module. I am writing a few simple codes to convince me that I understand what I do before writing code more complex. I wrote a simple code to divide two numbers and then multiply the result with one of the original numbers. The block diagram is shown below.

  

  Looks like that the fracture is not working properly. But the multiplication always gives zero, and I can't understand why. A typical result of the façade is illustrated below.

  

  If I remove the divide, the multiplication seems to work fine. Any idea on what I'm doing wrong would be greatly appreciated.

  After more than a day of scratching my head, I realized that one of the entrances to the multiply function is always zero, because it is read 52 cycles later (i.e. when the structure case is false). To resolve this issue, I added a node back feed, so that the data is made in advance and are available to the function to multiply once the function of the line ends. I have attached a picture for those interested / with similar problems.

  

• Tecra Z40-A-176 - how to get support for high speed Port Replicator III?

  Hello

  a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

  What I found was the support for laptops page itself, but not for the port replicator.

  With regard to:
  Klaus

  I want to have the support so.

  What do you mean by support and what is the problem with the display port?

  If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

• Need driver USB high speed for Satellite Pro A10

  I currently have a conflict with the USB port of my laptop da. When I plug a USB device, I get the message that no USB high speed drivers not installed. I had a quick glance in the section download under USB for Satellite Pro A10.

  Please advise where this driver could be found.

  Hello

  What operating system is preinstalled on your laptop? I assume that the Os is not preinstalled with original recovery image. Can you give us more information on this subject?

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

  If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

  Hi cliffwho

  You can fill with connections to the LAN. However I recommend you read this first to understand what it is that you do. I hope this helps.
  http://TechNet.Microsoft.com/en-us/library/bb457038.aspx

• HID of USB 2.0 high speed, broadband, end points supported for windows 7?

  I have a .net Application which reads the data from the USB from a HID device continuously in User Mode. The HID device using a size of 1024 bytes report and is configured to 3 Transactions by microdot. Also, the interval is configured correctly.

  Ideally, the USB should be able to receive data @ rate 24 MB/s. But my application cannot receive data @ 8 Mbps rate.

  So I wanted to ask if it's a question related windows or the drivers for the HID devices high bandwidth high speed, or can it be overcome using kernel-mode drivers. Or if there is anything else I may be missing

  (On USB 3.0 hub unit communicates successfully with the PC @ 24 MB/s. "So I don't think it's a device related issue).

  Thanks in advance to all who try to help :)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• My sister does not pay for high-speed internet, but she...?

  Hi, any help will be appreciated. My sister currently has high speed internet on his computer at home, but she's not be charged anywhere where we can see.

  She currently has comcast cable to his phone and cable TV. No where on the Bill is it supported for the high speed internet. Comcast deny it becomes internet delicately them. I origionally belive she got the service by ATT for phone and high speed internet. She changed phone service to comcast and I guess the external modem is home for internet high speed and his home phone. She is not charged for high speed.

  The problem is that his computer is his last stages of life, its between 10 and 11 years old and runs windows XP. I tried to plug in another post, but because I do not know where our 'free' high speed internet I have no meens to download the software for a new computer and I have of course no password.

  1 could. someone tell me through the settings or somewhere else on the computer where I could find information on high speed internet? Is that what I can do to connect a new computer to the Internet without a password?

  2. could I buy a wireless router broadband and connect it directly to the cable outlet in the wall can connect to its current modem (from comcast for internet and phone) or would need a password for the internet account that I don't have?

  Any help is appreciated! Any suggestions? Greg

  Click Start-> Control Panel-> network.  That displays all your network connections.

  Good luck.

• WiFi Internet high speed why isn't the Comcast speed charge me for? How can I increase my speed subscribed?

  Why my wifi internet speed usually only 6 Mbps when the service that I pay is supposed to be 20mbps high-speed through Comcast/Xfinity, and what I can do to fix this?

  Any suggestions for alternative ISPS for Olympia, Wa this offer affordable quslity connection; s?

  \

  It is a question for Comcast/Xfinity.

  If you are looking for another ISP, Google for them.

• Event ID 1 for Intel Bluetooth wireless high speed after Windows Update

  After the automatic update of Windows, I received the following in the event error message where the spectator, telling me that Intel Bluetooth wireless high speed needs to be reinstalled after the upgrade.
  How can I reinstall the Intel Bluetooth wireless high speed on my laptop?

  ----------------------------------------------------

  Source: ApplicationExperienceInfrastructure

  «Bei der application (Intel Bluetooth wireless high speed, von supplier Intel) following problem aufgetreten sind: Um eine einwandfreie Funktion zu able, muss der nach Intel Bluetooth wireless high speed modified von Windows neu installed werden.»

  + System
  -EventData

  DBType 15
  AppNameCount 36
  AppName Intel Bluetooth wireless high speed
  VendorNameCount 6
  VendorName Intel
  SummaryCount 149
  Summary Um eine einwandfreie Funktion zu able, muss der nach Intel Bluetooth wireless high speed modified von Windows installed werden neu.
  SessionID 0

  Hello

  I put t know what cell phone or what system you are using, but I guess that the laptop uses a combo of Wlan Intel card which supports BT also.
  So I think that you should simply reinstall the Intel Wlan BT driver

  I also found this how to from Intel:
  http://www.Intel.com/support/wireless/WLAN/sb/CS-032541.htm