High tower HP G60 has HDMI - no sound from the TV

I have a HP G60 laptop. I have from the computer, but when HDMI is plugged I transfer image on TV but no sound through TV on computer. I'm not very computer savy so any ideas, please do as simple as possible. Thank you, Bob

This link also applies to Windows 7.

HDMI configuration is done in the control panel-> sounds

Thanks for posting your results

Best regards

ERICO

Tags: Notebooks

Similar Questions

  • No sound from the tv with hdmi w3 connection

    I have a standard micro HDMI to connect my w3 to tv.  When a movie plays on the w3, I can see the video on the Tablet and the tv, but only the Tablet has its.  Is this normal?   I checked that the tv properly with other hdmi sources works but have no way to test the brand new microphone cable or w3 drivers.

    I was unable to locate a compatible driver on intel.com.

    However, I tried the w3 with a different TV and everything worked as expected: even with only a 'driver' Intel ESS Audio Device (WDM) available.  Passage of the tablet on television was automatic.  I did plug in and turn on the tablet in front of the TV and everything worked.

    I tried the same procedure with the original tv and the results were good video but no sound from the TV.  The sound remained with the tablet.

    I hae 2 TVs and 2 blueray players.  I swapped every combination of TV and player and everything works well.  Since the Tablet works well with at least one TV, the hdmi cable is ok.  My conclusion is that the current configuration of the Tablet works with some TVs and others not, and until I can find a better driver I'll just have to live with it.  I wanted to be able to watch videos with the Tablet when I traveled and will just have to wait until I get whenever I go to see if it works.  Not very desirable but it's like that.

    Thanks for your suggestions and help.

    Problem solved (sorta).

  • I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop

    I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop

    Thank you.  I had to go to the sounds and have speakers/headphones to HDMI it didn't work at first but founmd you need to have the TV and the computer.

  • No sound from the tv.

    I can not the fate of the tv the sound when I connect the hdmi cord, but his fate always the .can high tower someone help?

    Hello

    Try the following.

    Open windows control panel, open Device Manager and open display devices - note equipment listed here i.e. ATI, NVidia or Intel.

    Then connect your laptop via HDMI to your TV.  Do a right-click the speaker icon in the taskbar, and select playback devices.  Once (just to emphasize the entrance), the HDMI output which has the same name as your graphics card, and then click the set as default, see if you now audio left click.

    Kind regards

    DP - K

  • HP Wireless TV doesn't Connect - no sound from the TV

    HP G60 - 235DX notebook PC with Windows Vista.

    HP Wireless TV Connect WY555AA #ABC model

    Connected to the HDMI port - 2 on a Samsung HD 52 '' TV

    The video is great, but no sound from the TV speakers. Sound plays on the mobile speakeres.

    I checked the Device Manager on the laptop and the drivers are up to date and there are no conflicts.

    Help, please.

    Thank you

    Hello Larry,.

    Please take a look at this document, which provides troubleshooting steps that should help you resolve your problem of 'no sound', connecting your laptop to your Samsung TV via an HDMI cable.

    Please let me know if it helps to solve your problem.

    Good luck!

  • My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

    Low sound volume

    My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

    Hello

    1. what operating system do you use?

    2 did you change on your computer?

    Method 1:

    I suggest you follow the link and check.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

    Method 2:

    I suggest to follow the link and search for the volume in the taskbar.

    (a) right click on an empty area of the taskbar and then click Properties.

    (b) in the Notification area, click Customize.

    (c) select the volume see the icons and taskbar notifications check box, and then click OK.

    I also suggest you to follow the link and check.

    Change icons appear in the notification area

    http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

  • iOS 10 no sound from the speaker of the ear or EarPods

    After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

    Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

    Hello Billy78GR,

    Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

    First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

    1. Press and hold the sleep/wake button until the Red slider appears.
    2. Drag the slider to turn off your device completely off.
    3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

    Restart your iPhone, iPad or iPod touch

    As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
    If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

    Have a great day!

  • New iPhone SE no sound from the speaker of the brand

    I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

    I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

    Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

    • Key "secret" in both positions, no sound from the speaker
    • The top volume, using the volume buttons and the sound, no sound from the speaker settings
    • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
    • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
    • Past the phone power off & on again, no sound speaker
    • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
    • Reset iPhone settings, no speaker sound

    I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

    Thank you

    Hello Andy,

    Thank you for using communities of Apple Support.

    I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

    If the problem persists, then please make an appointment with the Apple Store is close.

    http://www.Apple.com/retail/Geniusbar/

    Take care.

  • I have no sound from the external speaker

    I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

    How did the car system connected to the car?

  • I deleted an email in Windows Live Hotmail, who came to my Inbox and foolishly, has now been removed from the deleted items folder is what I can do to recover this?

    I deleted an email in Windows Live Hotmail, who came to my Inbox and foolishly, has now been removed from the deleted items folder is what I can do to recover this?

    original title: I deleted an important email

    Take a look at http://www.thewindowsclub.com/recover-deleted-emails-windows-live-hotmail

  • I'm not all the sounds from the speakers. The volume is up

    I'm not all the sounds from the speakers.  The volume is up

    The following links may be worth a visit:

    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
    (Win XP / Vista / 7)

    (307918) how to troubleshoot sound problems in Windows XP
    http://support.Microsoft.com/kb/307918/en-GB

  • No sound from the microphone in Windows 7.

    Original title: Add a microphone to windows 7

    Hello I am trying to add a microphone to windows 7.  I put in the pink jack point on the back but no sound. I'm redoing a voice on a software program Pinnacle while the editing of a film that I took.  Thank you very much

    Hi Linda,.

    You are able to get the sound from the speakers?

    You can check if the microphone works on another computer.

    You can also try to run the hardware troubleshooter and check if it helps.

    Convenience hardware store

  • No sound from the right speaker / can not configure the speakers

    Hi all

    I have a new computer Sony laptop and just tried plugging in my speakers 2.1 computer inside.  Sound only comes out of the left satellite and a subwoofer.  When I try to set them up in the sound control panel, the installation of the single speaker on the speaker Assistant is stereo and only the first test tone (left) plays from the satellite on the left, then silence (no dial tone test on the right).

    Everything works fine on the built-in Laptop speakers, but they are for computer speakers, so I wish I could use my old speakers when I'm at my desk.

    Sony Vaio and Windows Update Update did not recommend all new drivers for the audio controller.  I downloaded and installed the latest driver on the site from Realtek but that didn't work at all so I rolled it back to the version provided with the system.

    Work fine with my laptop speakers older and my cell phone, so the fault is not with the right satellite is.

    Thank you
    Drew

    Hi Drew,

    Thanks for posting your query in the Microsoft Community. There is no sound from the right speaker in accordance with the description of the problem.

    ·         Did you do changes on the laptop before the show?

    I suggest you follow the steps in the article.

    Tips for solving common audio problems

    You can see these articles for more information:

    Sound cards: frequently asked questions

    No sound in Windows

    I hope this helps. Let us know if you need more assistance.

  • File Explorer has stopped working properly from the taskbar

    File Explorer has stopped working properly from the taskbar. Currently, I get only 3 windows on taskbar & opening No. 1 opens no.2 & vice versa, but no. 3 opens on its own. Can someone explain this & find a cure?

    I would like to highlight the file Explorer icon and pin it again.  To do this.

    (1) close all running programs, including records from the file Explorer

    (2) right click on the icon on the task bar Explorer and "Unpin from Taskbar" to remove

    3) press Windows + R to display the race. Type C: and press OK. This will open your C: drive.

    (4) make a right click on the taskbar that appears, the file Explorer icon, and then click "Code Pin to Taskbar" to pin it.

  • No sound from the HDMI connection Toshiba Bluray player BDX2100

    Hello

    I'm a newbie so I don't know if I'm in the right room or not, I want to ask that I have a Toshiba Blu Ray player model number or to number BDX2100 I have set up my fine reader TV and blu ray.

    There is one thing when I play my TV to HDMI 1 or 2, the image appears but there is no noise at all when I go on the Blu Ray in the audio settings menu it says 2nd audio or something to do with the HDMI is turned off.
    Oh I'm 100% sure and my tv is Sharp Aquos LC-22LE320 is not the TV because when I put the SCART lead in or put it on AV it works fine.

    The only problem is the sound with HDMI connection. If anyone can help, it will be very happy because it has been me bloody crazy.

    -musicman1982

    Hi mate

    It is a Toshiba computer / laptop computer forum.
    You will meet people who want to talk about options for laptops and Toshiba laptops.
    I doubt anyone here would be able to help you with this drive blueray.

    But in your case, I would first check the settings of the TV you.
    Check whether the sound via the HDMI port is enabled.

    > in the settings audio, it says the 2nd audio or something to do with the HDMI is turned off.
    I don't know why 2nd audio is mentioned there but maybe you should check if you can switch this 1 audio (audio main stream) m

    I recommend also consulted this blueray Player user manual.

Maybe you are looking for

  • HP Deskjet 6980: windows 10 + HP6980 to print YELLOW

    The driver for the HP Deskjet 6980 for Windows 10 mistranslates colors sent to the printer. It's what I use is the only new driver for this printer for Windows 7/64. Specifically, the YELLOW does not print at all - anything this spell either green bl

  • Where is the delete button located vi?

    I use 3.5 TestStand and LabVIEW 8.0.  I need to be able to delete files in a program of TestStand, and it seems that the best way to do that is call a LabVIEW vi. The Remove feature of LabVIEW to i/o files-> Advanced File Functions-> delete is what I

  • Unable to do Windows Update - error code: 800700 1

    Impossible updates updates window for some time.   Was not too concerned until I wanted to load a software application when it refused to load indicated he could not because of a damaged component and set the 1 800700 error code Is there any solution

  • G6-1294sl drivers win8

    Hello... I'm sorry for this post, but I can't find my drivers for this model of laptop. I just installed windows 8 [64]. in the section driver hp they don't give me info on this model of laptop... guys help me please? G6-1294SL A8S38EA #ABZ

  • The Wi - Fi button stuck on.

    I have an Acer A210. For some reason any Wi - Fi button will not slide on the position 'on '. In addition, there is a strong signal from the modem, not more than 10 feet, and he won't see the network. any suggestions?