Higher resolution of the photos?

Years I'm locked in a montage sequence Adobe to create (*.) PSD album pages) (8.5x11x300pix ~ 47 MB), then save them in (*.) (JPG) (8.5x11x300pix ~2.5MB). But the email them, it's to make them easily readable on any monitor, I have them shrink down to an acceptable (*.) (JPG) (3.86x5x300pix ~ 600 KB) size. I have more than 4000 album pages, each recorded in 3 sizes above! (I think that it is not possible), but my question is, how can I get a (net) e of the higher resolutionunacceptable image that can be presented in the same way that I use at the moment, it's still easily readable on any monitor do?

I think you should probably have been on the forum of Photoshop, but I'll answer anyway.

First let's get the terms straight. San you create images, the PSD and Some JPEG size 8.5 X 11 X 300pix... I think you mean 8.5 X 11 at 300 PPI. This means that the images are 2550 X 3300 pixel. There is no difference in the resolution or sharper of the PSD vs the JPG provide you don't compress the JPEG format to the death. The only difference is the size of the file and the quality of the information in pixels of each individual pixel. The quality setting of 100% for a JPEG, it would be very difficult to distinguish between the pixels of an image JPEG and PSD A. In order to test this open from your PSD files and then place a JPEG of the same image on the top layer of the PSC and set the blending mode to difference. All that's not completely black pixel is a pixel where information in JPEG format is different from that in the PSD.

Now scared to talk to the images you want to e-mail. You say that they are registered to 3.86 X 5 X 300 pix. Once again, I think you mean 3.86 X 5 at 300 ppi. This means that the smaller JPEG images are 1158 X 1500 pixels. According to today's standards, these are terribly small images. There is also another point. The PPP settings for the images that you want to send any at all. The TPP for the images that you want to put on a web page is not serious at all. The PPI also makes no difference if the image is intended to be used in a video or flash or displayed on a computer screen. Only the images intended for a printer to print on paper or some other media care about the PPP settings. Everything must be sized by the dimensions in pixels.

To prove my point download these two images and open them in Photoshop and check the setting of the PPI. The place in something on a printer as a doc word or Illustrator set up for a print document and to check the size.

My iPhone push 2448 X 3264 pixel, and I send all the time. You can see almost every pixel on a standard HD screen. Sending your 1100 images of wide pixels to a HD monitor would fill only about half of the screen.

So, here's the long and short of it. Most cameras now days hoot over 2500 images big pixel. Even my Sony point and shoot them takes pictures that are 4000 X 6000 pixels. If you resize your original images and reduce the number of pixels you reduce the resolution of the image regardless of the DPI setting. You limit your ability to manipulate the images again later. I didn't do it. Save for printing on 8.5 X 11 at 300 PPI is probably good enough, but with some high quality todays printers you can increase by 400 or maybe even more. In regard to the fixing of the jpegs to the e-mail or by sending them to a computer screen or monitor you want the images at least a scale display is in pixels. Many email clients will automatically reduce an image as an attachment to 600 or 1000 pixels wide, but in a modern 4K or even 5K monitor these images would be very small. I would design my workflow with final destination in mind and you ensure that I don't reduce the size of the camera originals. At least that's my 2 ¢.

Tags: After Effects

Similar Questions

  • What is the resolution of the photos taken on the PowerShot Elph 115 IS

    New user.  Tech challenged.  What is the resolution of the photos taken on the PowerShot Elph 115 IS?

    The camera doesn't shoot in PPP: it draws pixels & pictures will be X pixels wide by pixels X maximum. The printers use DPI & you should be 300 DPI or more for high-quality printing. Some software opens your photos & shows how great a feel you could do at 72 DPI, but who is just something built in the program & no has no real meaning, unless you plan to make a wall poster. It's unimportant info 99.9%of time.

  • How to increase the resolution of the photo on the iphone 5 s?

    I have an iphone 5 s and I want to find a way to increase the resolution of the photo for the camera.

    You can not.

  • Windows 8 - How to reduce the resolution of the photos

    In my old computer/operating system, I could easily reduce the resolution of the photos using my photo editor of MS office.  It is no longer available on my MS office 2013/windows 8.  The only photo in windows editor 8 who tries to provide the service will do it only for e-mail.  It also seems that I can put the photo in a 2013 MS Word document, change the resolution and then somehow remove the photo updated-I think, have not actually tried the process.  Really want something simple, easy to use, as it was - I hope that windows 8/MS Office 2013 is actually new and improved.

    Thank you.

    You can download and install Windows Live Photo Gallery and resize easily.
     
     
     
    Barb
     
    MVP - Windows/entertainment and connected home
     
     
    Please mark as answer if that answers your question
     
     
     
     

  • How to change the resolution of the photo

    resolution of title: original photo

    I recently installed a new hard disc and reloaded vista... my photos appeared "crushed"... it is set for high resolution...?

    Hello

    try going to your graphic card manufacturers site or computer and are looking for the driver download section

    Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

    then try to make the screen of solution of problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  • Higher resolution than the standard resolution is bad for your mac?

    Hi guys,.

    So my mac works normally on 1440 x 900, but with an application, I can go to full screen resolution supports and which is 2880 x 1800.

    So I was wondering, is - this bad for my mac? Is it bad for the map display, battery, processor, video or something else?

    Or is it perfectly save?

    Thanks in advance.

    If your Mac CAN operate at a higher resolution, everything that said is the lowest resolution you were using before was not the maximum resolution for your Mac.

    On CRT screens, you could push a little and squeeze more pixels horizontally on the screen than recommended.

    LCD flat screens have a pixel on the screen corresponds to a pixel in memory, the maximum resolution, and no compression is possible. Try to post more than that and he either cut them off or the screen goes wonky.

  • How to manage the high resolution of the images for 9860/9850 devices?

    The recently published 9860/9850 device having a display of 800 x 480.

    This means that we need to recompile applications with high resolution images for this device? Is it possible to have the BONES emulate 320 x 480 for the App (it's what iOS does for their retina display).

    Otherwise, I see this break many apps.

    Thank you

    -MO

    VK = virtual keyboard

    It's an investment of time very wise to make the resolution app agnostic, so that the layout is relative to the available real estate.

    In this way only a few minor assets will have to be updated and the application will still work out of the box.   According to the design of the application (i.e. using bitmaps full vs tile stuff) it might even not need to be adjusted at all.

    5.0 + provides a high quality, scaling, it is a valid option (I use it to support 5.0 320 x 240 devices, using the same assets than 7.0).

  • Resolution of the Photos on mobile diveces

    If I put photos in the cloud with my mac using LR, they appear on my mobile (e.g., iPad) in full resolution first.

    If I'm offline later on, only in rare cases they also have full resolution, but most of the time that the resolution is very bad and not enough to show the photographs to others.

    How can I ensure to load in the resolution that is usable on the mobile device and store it safely for use in offline mode?

    Thanks for useful tips,

    Andreas

    Hello PS-user13,

    When you synchronize from Lightroom Lightroom Web desktop, the images are sync would use smart insights that are 2560Pixel on the long edge.

    If you want images in full resolution on the Mobile device, you'll want to import on the mobile device itself, and synchronize with the Lightroom Web since Lightroom Mobile first.

    Hope this helps, let us know if you have any other questions.

    Concerning

    Pete

  • Why photoshop mix lower resolution of the photo.

    Is there a workaround

    In distribution, the canvas size is defined in the workspace of harvest. You can get there, and then drag the harvest so that the canvas is bigger.  In this case, the recorded image is at a higher resolution.

  • Concern about the resolution of the photo in my monitor

    Hello, this is my first thread and a newbee but I have a doubt. When a see a picture in first in the organizer and in the party edition see the photo in a kind of low resolution. Its very difficult for me to do appropriate PP. I went to the edition and the preference to change the resolution according to the video tutorial on Adobe TV and select the maximum resolution. Any ideas anyone? Thanks in advance!

    .

    Hello, pipegarcia,

    Premiere Elements has its own forum, which is here;

    http://forums.Adobe.com/community/premiere/premiere_elements

    and you will have better, more rapid RESPONSES PRE questions here. Good luck!

  • Complex script to automate the Conversion of Images high resolution for the Web

    I use Actions in Photoshop (currently using CS4) all the time, but have never tapped into the scripting features, so please forgive me if these questions are obvious.

    The basic description of my project is simply creating web images in jpg format, among our library of high-resolution print images.

    We have a folder with a copy of all the images we need to convert. File types from TIF, PSD, EPS, and JPG.

    The challenges (for me) are:

    1. these images vary in orientation to be big or wide; I need the higher between dimensions, whether the height or the width, 400 pixels; and then I need to canvas has added to the other dimension to make the picture a perfect square of 400 x 400. I don't know how, or if I can, do PS choose the bigger dimensions, to 400 px.

    2. some of these images have clipping paths; I need to use these roads to clear the background in the pictures; the names of these masks are not the same in each image.

    Thus, the basic flow of the script would open the file; Set the maximum size to 400 px; Add a blank canvas to fill the other dimension and that also make 400px; use an image clipping path if it has one to erase the background of the image. Save for web in jpg format, adding "-400" at the end of the name of the file (but before the '.jpg'); size 115 value and save for web, by adding '-115' to the name. value size 80 and save for web, by adding '-80' to the name.

    A new version has been downloaded more than PS - Scripts Sean this now creates a record of each file selected with the name of "JPEG" and there the possibility to include subfolders.

  • problem of monitor high resolution: why the interface is so small?

    I installed Adobe master suite cs6 in my new Dell XPS 13 Pentecost a 3200 x 1600 px screen resolution. The interface of all programs (photoshop, illustrator etc...) except acrobat pro, seems so small you cant'work. For example, the height of the voice of the menu police is less half millimeter. I installed the latest update of Adobe and put in Photoshop interface parameters 'large font', but nothing changes.

    Can someone help me?

    The programs included with a membership of cloud are updated for the new operating systems and hardware

    See for yourself if the LATEST version of Cloud works with a 30 day trial

    Cloud Plans https://creative.adobe.com/plans

  • Need higher resolution of the image in the workspace

    How can I get the best image resolution in my workspace of 6 CS organization? I see a setting that says "complete." Are there more parameters? I need full resolution in the editing process.

    IMac 27 "OS 10.8.3

    Thanks in advance.

    Thomas

    Complete is the highest resolution. You can change the program to 100% of the size monitor if you want to see the highest resolution in native format and to get an overview of quality if you do not have a reference monitor. Change back to Fit while you work.

  • Can I change the resolution of the Photos that can be downloaded from a shared album?

    Authorized visitors of an album that I published and shared can upload photos attached as a file "" big JPG. However, it seems that the resolution of these JPG files is fixed. Is it possible to change the resolution to higher values?

    Thank you

    Klaus

    Adobe generate DNG Smart insights via creative Cloud infrastructure; If the resolution is fixed but these mobile previews LR, used for synchronization, do not count toward your storage limit.

    However, you can use your storage limit to add any image resolution to one of your active files and share a link - see image below.

    Simply launch Creative cloud and switch to the active tab choose the folder to add pictures. Click on view on the Web to generate a public link.

  • To the bottom of the sample unnecessarily high resolution in the book?

    Hello

    I said in the forum Photoshop my workflow is strange and I don't have no need to do any resizing photoshop because there is the option at the bottom of the sample images of a unnecessarily high effective resolution is it in InDesign.

    So if I have a lot about 17.4 inches wide color jpeg photo and I want to put in JPEG 5.4 "black and white in a book of say 15 chapters and then export the book in pdf format, how can I avoid using photoshop? And where is the control at the bottom of the sample at 300 dpi or less?

    Thank you

    Garrett

    (I'm down here too... sniff.)

Maybe you are looking for

  • Contact shares at the request of message does not

    I upgraded my ios to 9.3.1 and the contact of message application sharing does not work. I reset my phone, but the problem is not resolved. Does anyone have the same problem? How to solve it?

  • Dialog message via RS232 (how to set correctly)

    Hello You know, how to create a message for the choice of the wrongly selected via an RS-232 COM port. I tried to use is displayed to the user, but it appears each time you start... I need proven, just in case an error error (green line). Do you know

  • HP deskjet 2542: scanning

    Hello Just set up my new printer and his fine work part 1 problem. I want to scan from the charger that I can't do. He scans the glass only, would you please explain where I'm wrong. Thank you

  • Help customization Facebook notifications

    I just got my cliq yesterday and I love it. only thing I'm not crazy, it's that my battery was drained when I woke after recharge forever the day before. I had a ton of notifications of friends on facebook. is there anyway to choose who I want to rec

  • Add a network printer

    I'm trying to minimize the huge footprint of the hp software and drivers for my officejet 6500.    Once, I use the hp officejet 6500 for control panel connect to the router... can not just add the printer to each computer using windows (and MAC os) a