Hioki 3193 driver for LabVIEW 2010

I found a LabVIEW driver for our Hioki 3193 wattmeter but he says that the vi is too old to be converted into LabVIEW 2010. Someone at - it a driver for the Hioki 3193 which is already updated for 2010, or who would be willing to upgrade the version of the driver for me?

In the future, you can post upconvert queries in Upconvert requests Thread

Tags: NI Hardware

Similar Questions

  • Is there a Module NXT for LabVIEW 2010

    Is there a Module NXT for LabVIEW 2010?  If not, are there plans to bring a available and if so, when?

    Hello

    I found a link to a download for the module 2010 here.

    I hope this helps.

  • Need Board SPARTAN 3rd driver for Labview FPGA 8.5! THX

    Hello!! I need 3 spartan driver for labview 8.5 (not for labview 8.6) for school Ultimativa try to download from ftp://ftp.ni.com/outgoing/NISPARTAN3ELV85.zip
    but this link is dead now. Does anyone could send the driver to [email protected] PLZ? Thank you very much for all in advance

    kongleelk,

    You can find the file in the url above for a few days. Let me know if you have any problems.

  • NOR-DAQmx for LabView 2010 SP1

    I am looking for the installation of NOR-DAQmx for LabView 2010 64 bit SP1 package?

    Yes.  Do not change the destination directory.  The drivers will be add support for any version of LabVIEW, you installed from LabVIEW 2010.  This includes 32-bit and 64-bit versions.

  • CLIP IS taken in charge by Xilinx Spartan3E driver for LabVIEW 8.6?

    CLIP IS taken in charge by Xilinx Spartan3E driver for LabVIEW 8.6?

    For the HDL interface node, enable and multi channel clock domain is difficult to understand

    New version of driver that supports the CLIP is displayed: ftp://ftp.ni.com/evaluation/academic/spartan.zip

    First uninstall your current version and then install it.

  • Report Generation toolkit for labview 2010

    H all.

    I'm looking to download the 2010 labview report generation tool. When I proceed to download the Toolkit on the site of the national instrumnets, it says that I need LabVIEW 2011 or later in order to install it.

    Is there a version of this for labview report generation 2010 toollkit and can anyone provide a link maybe?

    Thanks for reading.

    Try this: [link removed, can be found on ni.com/downloads OR software downloads, the LabVIEW Report Generation Toolkit 2010 is available to customers with program Service Standard here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other clients can communicate directly with NOR]

  • 64-bit driver for LabVIEW FPGA Xilinx SPARTAN 2009 3rd starting Board

    My dear I need this add-on

    We I install the module i hava, it seems

    Support for LabVIEW for Spartan-3E (incompatible with the 64-bit platform)
    is their a supprt 64-bit version?

    Best regards

    Hello mangood,.

    There is unfortunately no way to use the driver on 64-bit Windows. You will need to use the 32-bit operating system to use the Spartans drivers. Sorry for the inconvenience.

  • Keithley 2400 driver for Labview 8 does not

    I sought advice and found this driver for a Keithley 2400, which must work with Labview 8.  I have Labview 8.6.

    http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=25B255F3AA83660EE0440003BA7CCD...

    I put the driver file in the right place and the vi are appearing in the selection menu, as expected.  I have my Keithley 2400 connected to a serial port COM1.  When I am trying to run the VI initialization it does not work.  I know that they are communicating in a form any because my Keithley goes into remote mode and the driver initialization is able to read properly what is the model of the Keithley.  When he arrives at the VISA read vi is to expire, it always returns the correct model identification.  I do not understand why it is allowed and does not.

    Is there anything else I should have installed?  The driver readme indicates the only additional software required is 3.2 NI-VISA, but I have version 4.4, so I should be fine.  I don't understand why it "kind of" works.  Any help would be greatly appreciated.

    You should check the endpoint used to indicate the end of a message from the instrument. The 2400 can use one of the 4 different endings:

    I don't know which is the default. The driver is written assuming that , although this should work if the instrument is configured to use either or . If it is set to one of the other 2 then you'll get a timeout on reading error.

  • need to convert keithley 2500 photodiode double meter driver for labview 2012

    I installed the driver but found could not use it because the driver version is too old.

    Can anyone help to convert so that it could be used in my labview 2012? Thank you very much.

    There is a separate Commission for the versionhttp://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion of Conversion

  • Modbus driver for labview

    Hello

    Has anyone used driver to connect to a device using RTU on RS232 Modbus labview?

    I have a camera that I need to send messages and I tried to use the labview OR to that effect drivers.

    I used 'Query.vi Mo series Master' to send a message.

    But, I don't know what it would take as input in this vi to frame the message using the RTU Protocol.

    Also, I wrote a program to calculate the CRC for an input string. I don't know where to give that as input for this vi add the CRC to the frame of the message.

    The vi automatically calculates the CRC?

    I am attaching the document for the device in which talks about pages 106-117 to develop an application to control the unit.

    Can someone tell me please how to use modbus for this driver? The document in support of this driver gives me a lot of information.

    Thank you

    VJ

    The modbus VI automatically calculate the CRC for you.  Right-click on the inputs to the Modbus VI query and select Create constants.  The constants will be the clusters for the necessary data.  The key parameters are Modbus slave address, command, address,...

    Note that registry modbus addresses may or may not be moved by 1.  So address 1 in the manual might actually be the address 0 in the Modbus VI.

  • Bronkhorst driver for LabView 8.0

    Hi all

    For my work, I built a new machine. I'll have to measure the gasflow and flow critical, open a faucet. On the side, I measure a difference in pressure and weight. As my background is far from the programming, it will be a great challenge :-)

    On the flow, I am a flowmeter Bronkhorst, with a FlowDDE interface. So, I guess that this VI would help me a lot: http://www.morechemistry.com/labview/driver-bronkhorst/vi_bronkhorst_01.html

    The problem is when I open this VI, it say I need at least LabView 8.2. I have 8.0.

    Is there a way to use this VI anyway? Or have I missed an another VI can be used to import data easily FlowDDE? (I got the FlowDDE 4.62)

    Thank you.

    Best regards

    Renisaac

    The VI in 8.0 is attached.

    DDE. Interesting.

    If you encounter this new you can post downconvert queries in the thread Downconvert VI requests.

  • epm2000 driver for labview 8.5

    I try to open EPM2000 website of molectron driver, but he's too old. Anyone have a version that has been converted to 8.5 or something that can open the 8.5? Thank you.

    Hi, Steve,.

    Attachment - llb, which turns into LabVIEW 8.5.

    Best regards

    Andrey.

    PS

    DJ Dave, strange answer, OR engineer.

    First of all, the LLB can be open in LabVIEW 6.1, then registered, then open in LabVIEW 8.5 and still saved. LabVIEW 4.01 is not necessary for the conversion.

    Second, LabVIEW 4.01 can be started under WinXP (Yes, officially incompatible with the latest version of Windows, but sufficiently compatible for purposes of code conversion).

  • How create/get ColorPal driver for LabVIEW?

    Hello!

    I am a french student in England and I'm working on the Starter Kit 2.0 (with DaNI Robot). My company wants to turn the feature of prevention of obstacle (thanks to the ultrasonic sensor) into a follower of colored (thanks to the Parallax ColorPal) line. So I want to program in LabVIEW but I don't really know how to get the driver ColorPal or screws to connect between the sbRIO 9632 and this color sensor. I use the same yarn as the ultrasonic sensor to connect the ColorPal.

    Thanks in advance for your help.

    Concerning

    Kevin

    Hey Kevin,

    I took a glance at the ColorPal documentation and it seems that it is programmed using e/s series. As you can see below:

    You will need to do, is use series found below the palette of e/s of instrument LabVIEW VISA and functions to communicate with your ColorPal. I recommend that you download their website ColorPal documentation and study the syntax of the commands that you will need.

    Also for reference here is a good place to start when programming of VISA.

    Kind regards

  • Ring type constant def not updated for LabVIEW 2010 SP1

    I have a problem with the update of the control ring LV 2010 SP1 constants.  If I change the values or names of elements of a ring of control that has the defined type (type def or type strict def) my constant schema do not update.  The constants are set to Auto-Update of type def and if I right click on the constant, change to a control and then back to a constant, they update very well.  And if I have a control/indicator on the comic it refreshes also very well.

    Anyone else seen this problem or can someone seeks to duplicate?

    LV 2010 SP1 bug?

    Thank you

    Dan

    It is not a bug. See here - http://digital.ni.com/public.nsf/allkb/46CC27C828DB4205862570920062C125

  • 3532 HIOKI driver is for labview 5.1 but I have labview 8.5.

    I found HIOKI-3532 driver for labview 5.1 but I have labview 8.5. I got the error message you see in the image below. Is it possible to convert the pilot? All solutions?

    Hi Zancis,

    have you noticed the Version Conversion Board at the top of the forum of LabVIEW?

Maybe you are looking for

  • Running OS 10.10.5 and have the popup MacKeeper in Safari and want to eliminate

    Trying to get rid of the popup MacKeeper

  • Lenovo X 1 carbon slows abruptly when the AC is attached

    Lenovo X 1 carbon slows abruptly when the AC is attached. I asked this question on the web with all the details and screenshot here. http://superuser.com/questions/954862/Lenovo-X1-carbon-suddenly-slows-when-AC-is-attached I bought two X 1 carbon bec

  • How thre cutoff frequency

    Hi all Please find the program in the attachment. I am interested in a specific frequency band, for example, Hz 101 to 103 Hz and peak in the frequency spectrum you're looking for is probably to 102Hz. What I did is to put two filters as a band-pass

  • ERROR: No supported CPU installed, HP P6310F

    HP p6310F Windows 7 Home Edition ERROR: No supported CPU installed CPU replacement Hello!  I replace the CPU in my HP P6310F.  According to this literature, http://support.hp.com/us-en/document/c01949155 , I have an AMD Phenom II X 4 Quad-Core 9xx/9x

  • Audio problems Sound or beats

    Hello I ve just bought a brand new hp pavilion dv6 6190 with beats audio and the sound of it isn't good... it sounds like something that lacks audio, especially the base, someone can help? Thank you...