HIS 520W does not meet two parameters

Hello

I have a Cisco SA 520W, which does not seem to respond to the two parameters of the configuration.  I have enabled/disabled/re-enabled several times and still no change in behavior.

The first is PING on the WAN interface.  I want to enable it, but the check box is cleared and the box does not respond to pings WAN.

The second is periodic audits of the firmware.  I put my user name and password in the configuration and left the box empty but the router on a regular basis (once per hour perhaps) check cisco.com for updated firmware update.

I am running the latest firmware of 1.1.21

Brian

We have seen some strange behaviors on ping of the WAN interface.  We are aware of it and looking to solve it.

I'm not aware of the issue with the firmware for update checking.  I'll pass this along to the team.

Tags: Cisco Support

Similar Questions

  • Pencil tool does not meet the parameters

    I use on Mac OSX 10.7.5 CS6. I use a Wacom Intuos Pro. I select all the options I want using the pencil tool, and the result does not reflect the options that I have chosen. Lose my mind!

    Of course, I never heard of the pencil as a customizable tool - not as tool - brush.

    If you want to Stylize your paths with pressure or angles, you can use the Brush tool.

    Perhaps, you have always to use the Brush tool instead of pencil.

  • Why 'customize' does not meet the parameters of vista on a Dell laptop?

    I have a Dell Inspiron 1501 under the Vista operating system. For some reason any its has ceased to accept new office customization settings.  When I change the length of time that I want to turn off the display, put the computer to sleep or turn off the hard disk, it will not respond I went to extremes to make it work, point of use of the system restore disk and reboot the computer, nothing helps.  I had the program 'Fixit' diagnose and attempt to solve the problem. Okay, this isn't the greatness of the blue screen, but I would appreciate if anyone has a solution to this problem.

    Hello

    Check with Dell Support, their drivers and documentation online and ask in the Dell
    Forums for known problems.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    -----------------------------------------------------------------------------------------------------------------

    Use the start-up in minimal mode and other methods in this troubleshooting to see if you can find
    or eliminate problems.

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

  • Recently, I went to the Apple Store in Easton, because I broke my screen. After that I got my fixed screen it worked for a little while but now it does not meet my contact

    Recently, I went to the Apple Store in Easton, because I broke my screen. After I got my fixed screen, it worked for a little while but now it does not meet my contact, Apple is responsible for this and how do I get my screen works again?

    Take it back to the Apple Store. Repairs made by Apple retail stores are still covered by the warranty.

  • OSX EL CAPITAN UPDATE CANNOT BE INSTALLED TO THIS DISK. THIS VOLUME DOES NOT MEET THE CONDITIONS FOR THIS UPDATE

    Hi all

    My iMac features are:

    • 27-inch, late 2013
    • 3.2 GHz Intel Core i5 processor
    • 8 GB 1600 MHz DDR3 memory
    • Start drive Macintosh HD
    • NVIDIA GeForce GT 1024Mo of 755M graphics
    • Storage: 301,35 free GB of 999,35 GB

    Running currently on OS X El Capitan with Update Version 10.11.3 installed January 27, 2016

    Problem: I was on the purchase of 2016 Office for Mac and tried to install the update of El Capitan OS X 10.11.1 which is necessary to solve the problems with this version of Microsoft Office.  During installation, the following error message appears:

    "OS X El Capitan update cannot be installed on this drive. This volume does not meet the conditions required for this update".

    I would be very happy if someone can help me in installing this update.

    Thank you.

    Slpm6

    I just got a quick reply saying 'You are not allowed to create or update this content'. What should I do to solve the problem? Thank you.

    You are using a newer version of El Capitan that the updater contains and so cannot install it.

    (139598)

  • Satellite P300 - 19 p: impossible to install WIn XP IMSM driver - does not meet minimum requirements

    Hey there,

    I just finished installing Windows XP Pro (32 bit) and have encountered a problem during the installation of a driver of some.

    When I try to install the driver IMSM Intel 7.8.0.1012 I get this error message "error: this computer does not meet the minimum requirements for the installation of this software, the installation program closes.

    Help, please
    Brad

    Post edited by: stickmen404

    What version of Windows you have installed, SP1 or SP2?
    Have you changed your settings of the SATA controller in the BIOS?

    In the end, I think you don t he need at all. I installed Windows XP Home on A300 and have the same problem. Without this driver WXP THAT works well.

  • Im trying to load the update of Mac OS x Server combined software and it says that my disk volume does not meet the requirements of the software

    Im trying to load the update of Mac OS x combined Server software on my Mac Pro Tower 10.7.5 worm and it says that my disk volume does not meet the requirements of the software? Has anyone ever come across this problem?

    You are running a Mac OS X Server software? If so, which version?

  • Game room requires a video card that supports shader model 3.0 your video card does not meet these requirements

    I downloaded Microsoft Games for Windows - Live. I then downloaded & installed the game games room. When I tried to play it I got this error: game room requires a video card that supports shader model 3.0 your video card does not meet these requirements: How can I fix? Will this work? http://www.download3k.com/system-utilities/system-maintenance/download-graphics-card-driver-update.html

    Hello Ann42633,

    If you have not changed the video card that you purchased your computer, you can visit the Dell Web site and use the service tag to determine the video card.

    In addition, you can locate the type of video card you have by the following text:

    -Click Start

    -Type Device Manager into the start menu search box, press enter

    -Develop graphics cards

    You must also obtain the appropriate driver from the Dell Web site and update your video card.

    Hope this helps

    Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

    I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

    However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

    Is there a way to get around this?

    See below articles for solution

    1 system requirements for the .net framework

    http://msdn.Microsoft.com/library/8z6watww.aspx

    2 download links for .net framework

    http://www.Microsoft.com/net/download

    or

    http://msdn.Microsoft.com/en-us/library/5a4x27ek

    3. top 8 resources for .net framework

    http://www.Microsoft.com/net/itprofessionals

    4 dependencies and Versions of .NET framework

    http://msdn.Microsoft.com/library/bb822049.aspx

    5 frequently asked questions
    http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

    6. management of versions, compatibility and run side-by-side in the .NET Framework
    http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

    Good luck

  • Printer HP PSC 2300v: HP Photosmart 2300v on Windows XP operating system does not meet orders

    Printer HP PSC 2300v all-in-one Windows XP OS does not meet all orders - not even to 'turn off '.  Only managed to do it turn 'works' by lifting the lid of the ink cartridge.  Already been installed & used for many years without any problems.

    Hello @Chiefyswife ,

    Welcome to the HP forum.

    I understand that your printer is not responding correctly.

    I want to help you with this.

    When the printer is on, unplug its power cord.

    Wait about 30 seconds.

    Reconnect the power cord.

    If it does not please let me know.

  • Virtual Storage Manager - startTime does not meet the minimum value of 0 error

    Hello

    Someone at - it a fix for the problem in the region related to programming?

    When you attempt to add or change a schedule, we get the following error.

    Title: Too small
    Text: startTime does not meet the minimum value of 0

    What another user has said there US no customer impact and workaround has been to change the region of the computer you were using. I tried this and it doesn't work.

    This error is now a few years old.

    For anyone having this problem, add a parameter string regional en_US to the URL.

    For example .../vsphere-client/?locale=en_us

    Schedules can now be modified properly.

    Here's hoping for a permanent solution in the next major release.

  • This computer does not meet the minimum requirements for installing the software

    Hello

    I try to install the graphics driver on my laptop Dell Inspiron N5010 (I tried this three R252283, R257270 and R285472). But every time I get the error indicating that "this computer does not meet the minimum requirements for installing the software.

    Here are the details of my laptop configuration:

    Core i3 processor, RAM 3 GB, windows 7 64-bit Operating system

    Makes sense, you do not have the integrated Intel graphics card, but rather have an AMD graphics card, install it:

    http://ftp.Dell.com/video/R272410.exe

  • "BOLD" does not meet the system requirements? -BES

    This is getting ridiculous.

    Tried to install my Orange BES "BOLD" - and I get this message on the WAP site:

    View

    I'm sorry that your device does not meet the system requirements that are needed to support BlackBerry App World.

    Yes - I'm in the United Kingdom

    No - there is no policy of BES blocking apps

    Feature: "BOLD"

    OS: v4.6.0.162

    Carrier: Orange UK

    Plan: BES

    2 devices on different networks - and AppWorld does not work on either! is this an April fools joke?

    This question seems to have been resolved - try to access the same address now and it will work.

  • This computer does not meet the minimum requirements... when installing graphics Intel HD 4000 for my Dell Vostro 5560 with Windows 7 64 bit

    In recent days, I reinstall Windows 7 to my Dell Vostro 5560 and this laptop does not have a driver CD, I downloaded all the required drivers for my laptop directly from the Dell Support Web site. I started to install a step by step. Chipsets, Audio, network, MEI, etc... However, once I try to install graphics, this laptop comes with 2 graphics card, an Intel and another is Nvidia. So, I try to install first Intel. When I click on the exe file, a message box appears saying that «this computer does not meet the minimum requirements...» ». Why is - what happened? I'm sure that my laptop include Intel graphics. Please help me as soon as POSSIBLE. I want to install Windows 7.

    Some drivers of today require at least Microsoft .NET Framework 4.5. Is this possible?

    It is certainly. AMD demanded 4 .NET. x + for their installer drivers for several years already, but I think they have started including with their driver downloads recently.

    -I never noticed if Nvidia use .NET with their drivers Installer, install but .NET 4.5.

    Download Microsoft .NET Framework 4.5 of the official Microsoft Download Center

    .

  • installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

    installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

    This means what he says.  You do not have the minimum required VRAM.
    The minimum specs for the game is listed as 128 MB of VRAM, but is supposed to work
    on the graphics card integrated Intel 2000/3000.
    The amount of VIDEO memory dedicated on laptops is apparently determined by the FAB of the laptop.

    Without knowing which laptop, or if it is one that has a dedicated graphics card, I guess that your laptop uses integrated graphics that devotes too little of VRAM (64 MB?),
    If it does not the minimum requirement of 128 MB of VRAM.

Maybe you are looking for

  • 38.0.1 brought my old computer to its knees

    My desktop computer is really old, but has served me well. Firefox 38.0.1 is unfortunately unusable. Web pages take forever to load and are virtually non-navigable. The processor temperature rises well above what is normal for this computer. Return t

  • backup iPhone doubled with iOS9!

    I just finished a backup of the iPhone, the first since the upgrade to iOS9. After finishing, I noticed the available disk space on my MBP drop between t0 and about 50 GB 20 GB and when I looked the backups under mobile application support in my home

  • Each Tanfer some Satellite C670 make a fort/diver click noise

    Hello I just bought a computer portable satellite Satellite C670.Each Tanfer bit it make a noise loud click/THUMP inside, a hard drive? is this normal look forward to your replies the

  • HP Mini 110: My HP Mini 110-1125NR asks me to "Enter CURRENT Password"

    I entered what I know and nothing works. I get this error message: Fatal error occurred CNU93889FQ Or something in that sense. CNU93889FQ is the number he gave me so I hope this helps.

  • NEITHER USB 6008 help to order 3 relays.

    Hello! I have a DAQ 6008, and I need to control the three relays for the filming of lights, so I scored a VI to activate the relay through three buttons. My problem is that I don't really know what kind of relay that I need. I need something like 5VD