His crackling/lag all the seconds when you use Virtual Audio Cable / Line in on my HDTV

Similar Questions

• Artifacts of the screen when you use the stamp tool

  Has anyone seen this?

  When I use the stamp tool I get all kinds of objects on the screen. Weird thing is when I do a screen recording of it, it's much less obvious but nonetheless still there. If I want to make a screenshot of it he disappears as soon as I touch the screen capture key (cmd-shift-3) or toch any key.

  So I had to take a picture with my phone:

  

  I tested VRAM / my different applications with dedicated GTX680 GPU / benchmarking utilities and results all seem well, games work fine, any application that uses my GPU works very well. Except of course Illustrator, which crashes all the time when you use GPU performance. And now Photoshop.

  A video of these objects can be seen here: http://www.studio57.nl/downloads/PS_Stamp_Sreen_Artifacts.mp4

  I'm on Mac OS X Photoshop CC 2015.1.2 10.11.3, and the last 346.03.05f02 of Web Driver nVidia.

  It seems that it is. I had the form of the word NVIDIA, they were able to reproduce to the issue and they are working on a fix.

  I'm so happy that my hardware is fine and that NVIDIA is still developing drivers for the Mac community!

• I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

  I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

  Hi vijaysampath, please make sure first that the date, time, and time zone are set correctly on your system. If this does not solve the problem (or it is already set correctly), a possible solution depends on different factors:

  • What is the error code indicated under Technical Details on the error page?

  in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page to verify the certificate, as shown on the attached screenshot:

  • What information about the issuer of the certificate contain?

  Please take these two pieces of information. Thank you!

• Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

  I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

  Hello

  Open the control panel-> mouse. There should be an option to disable the touchpad.

  Good bye

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• How can I customize the toolbar when you use the browser of the attribute

  In CVI 2012, changes in the toolbar depending on the environment, for example, it is different to the source window and the user interface editor. The toolbar can be customized using the Options menu / toolbar...

  Unfortunately, when you use the browser of the attribute of the user interface editor, another toolbar is displayed, i.e. not the UI Editor toolbar... I would have assumed that the browser of the attribute belongs to the user interface editor, obviously this isn't... So, how can I customize the toolbar when you use the browser of the attribute?

  
  

• Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  This occurs when calling a ref cursor-returning packaged function stored with OracleCommand.BindByName set to true.

  When BindByName undefined, it works as expected.

  I've only been able to recreate this problem on a machine in my control. This issue has also reported to me by a customer.

  I tried to change the locale of the system of EN - UK EN-US, but I was not aware of any change in behavior.

  Similarly, I've tried explicitly overriding the default locale of the system with the OracleGlobalization parameters, and it also had no effect.

  Please see the example below.

  ---

  Environment (default):

  Windows 7 Professional 64-bit SP1

  Visual Studio 12.0.21005.1 REL / / CAN BE SIGNIFICANT

  .NET framework 4.5.51209

  Local system: EN - UK (but also does not, EN-US).

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Environment (base):

  Windows 7 Professional 64-bit SP1

  Updated Visual Studio 12.0.31101.00 //SEE above 4

  .NET framework 4.5.51209

  Local system: EN - UK

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Call stack:

  	mscorlib.dll. Unknown System.Number.StringToNumber(string str, System.Globalization.NumberStyles options, ref System.Number.NumberBuffer number, System.Globalization.NumberFormatInfo info, bool parseDecimal)
  	mscorlib.dll. Unknown System.Number.ParseInt32(string s, System.Globalization.NumberStyles style, System.Globalization.NumberFormatInfo info)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Types.OracleRefCursor.OracleRefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.ServiceObjects.OracleRefCursorImpl refCursorImpl, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long initialLongFS, long initialLobFS, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.ExtractRefCursorFromAccessor (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution, int currentRow) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.GetRefCursorFromBytes unknown (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleParameter.PostBind_RefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.TTC.Accessors.Accessor bindAccessor, long fetchSize, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleCommandImpl.ExtractAccessorValuesIntoParam (Oracle.ManagedDataAccess.Client.OracleParameterCollection paramColl, Oracle.ManagedDataAccess.Client.OracleConnection connection, string commandText, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! Unknown Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader(bool requery, bool fillRequest, System.Data.CommandBehavior behavior)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (unknown)

  > ManagedSimpleRefCursor1.exe! NoddyConsole.Program.Command_ExecuteReader_BindByName_Fails (Line 63 c#)

  Example:

  ----

  using System;

  using System.Collections.Generic;

  using System.Linq;

  using System.Text;

  using Oracle.ManagedDataAccess.Client;

  using Oracle.ManagedDataAccess.Types;

  using System.Data;

  namespace NoddyConsole

  {

  public class Program

  {

  public static int Main (string [] args)

  {

  Error int = 0;

  Errors += Command_ExecuteReader_BindByName_Fails();

  Errors += UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails();

  return errors;

  }

  public static int Command_ExecuteReader_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  var conn = new OracleConnection ("user Id = UNIT620; Password = UNIT620; ("Data Source = / / ln1apidb01:1521 / fm");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  cmd.CommandType = CommandType.Text;

  BindByName. cmd = true;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader(); FAILS to System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  /* *-/

  OracleRefCursor orc = null;

  cmd ExecuteNonQuery()); must fail here

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  /* */

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  public static int UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  BindByName. cmd = true; // ####

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_2; END; « ; No params, works

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader();

  OracleRefCursor orc = null;

  HERE does NOT cmd. BindByName = true; System.FormatException first-chance exception in at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  cmd ExecuteNonQuery());

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  ORC. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  }

  }

  ---

  create or replace package THAT SHAUN is

  type ref_cur_type is ref cursor;

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type;

  end SHAUN;

  /

  create or replace package body what SHAUN

  -TTS000233

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type is ref_cur ref_cur_type;

  Start

  Open the ref_cur for

  Select UO.object_name from user_objects UO;

  Return ref_cur;

  end recreate_issue_1;

  end SHAUN;

  /

  ---

  Thanks a lot to qualify again for me Alex.  I'll try upgrading to the latest version of the provider.

  The difference in behavior between the two hosts was found to be reduced to differences in configuration VS.

  Checking 'Just my code' prevents the first chance thrown in the debugger exception. As in fact, the exception is handled in the provider, it is enough for me.

• How can I change the scale when you use the measure tool

  How can I change the scale when you use the measure tool

  With the tool selected, right-click the document, and then select "rate of change of the scale.

• What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  Francine simply connect to the internet periodically to receive updates and validate your membership.  If you have an annual membership, you can be disconnected until 99 days.  You can find more details in the help of Activation & deactivation.

  I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.

• ORA-01403: no given available problem when you use FETCH of AUTOMATIC LINE to fill

  ORA-01403: no given available problem when you use FETCH of AUTOMATIC LINE to fill out a form.
  
  1) has created a FORM on the use of assistants of EMP. This creates an AUTOMATIC FETCH of LINE
  NAME OF THE TABLE - EMP
  The PRIMARY KEY containing - P2099_EMPNO point
  Primary key column - EMPNO
  
  By default, automatic extraction has a "process Error Message' of"Unable to fetch line."
  
  (2) created an HTML region. In this region add
  text P2099_FIND_EMPNO element
  GET_EMP submit button
  The update branch the conditional branch created when the Create button to set P2099_EMPNO with & P2099_FIND_EMPNO.
  
  If I then turn the page, enter an employee in P2099_EMPNO number and press the GET_EMP button, the form is filled correctly. But if I get an employee who does not exist, then I get error oracle ORA-01403: no data found and no form but a message at the top of the page 'Action transformed '. I was expecting a blank form is displayed with the message 'Could not extract line.'
  
  In conditioning automated extraction so that it checks that the line exists first, I can work around that. Change the fetch EMP automated line so that it is conditional
  EXIST (SQL query returns at least one row)
  
  Select 'x '.
  from EMP
  where EMPNO =: P2099_EMPNO
  
  
  But this means that when the employee exists I must be get DB twice, once to the State, and then again for the extraction of the actual line.
  
  I can't change so I don't get the Oracle error, rather than work around for a above is there something? I wonder now if the automatic extraction of line is only supposed to be used when you bind a report to a form and that I should manually write the extraction process. The reason for which I don't have at the moment, it is that I'm trying to stick with the auto generation Assistant as I can.
  
  Any ideas?
  
  Thanks, Pete

  Pete:

  The process Assistant APEX (ARF, ARP etc) errors are generally not recoverable. The error encountered is simply displayed on a page by using the model of "Error Message. So as you said yourself, you create your own process line Fetch and have the opportunity to customize the management mistakes, or you paste a validation on the page to verify that a folder can be accessed for the views expressed.

  CITY

• Used QUICK to collect files from the XP machine. Now cannot locate the data when you use Easy Transfer on Win 7 machine to restore settings

  I had XP SP3 on my computer and used the files and Settings Transfer Wizard to collect the data.  Recorded on another partition, formatted and installed Win 7 Pro.  Now, when you use Easy Transfer to restore data it tells me that it cannot find all the data.

  Any ideas?  Thank you!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• ADF: How to get the path of the file when you use component InputFile

  Hi all

  I use jdeveloper 11.1.1.5.0 version.

  in my case, I created program Mail Client mail where I used the ADF InputFile component for attach file mail.

  but problem is this return path only component InputFile from the file (only the filename get)

  and in my mailer class DataSource uses the full path name of file access.

  UploadedFile uploadfile=(UploadedFile) actionEvent.getNewValue();
       String fname= uploadfile.getFilename();//this line only get file name.
  

  so, how can I get the full path using adf InputFile component or any other way to respond to my request.

  Thank you

  Manish

  Try this (I did not, so I can't promise it will work):

  MimeBodyPart messageBodyPart = new MimeBodyPart(uploadFile.getInputStream());
  messageBodyPart .setFileName(uploadFile.getFilename());
  messageBodyPart.setContent(multipart);
  

  It does use the inputStream from the downloaded file as the content of the file attached. You shouldn't need a full path, since you're not going to use a file object to provide the content.  And it shouldn't be necessary to define the DataHandler.

  But if that doesn't work, I go back to my first answer.  Use uploadFile.getInputStream () to get the inputStream from the downloaded file, create an outputStream to write the file to the file system of the application server.  Then you have a file with a known path that you can subscribe to the DataHandler.  You can delete the file when you're done with him.

• Collect in bulk in stores less number of lines in the collection when you use the LIMIT?

  I wrote the following PL SQL anonymous block. However, the line dbms_output.put_line (total_tckt_col. FINALLY gives me) output as 366 (DBMS_OUTPUT is Developer SQL) which is correct when there is no limit. If the limit is set at 100 in the FETCH statement then dbms_output.put_line (total_tckt_col. Give me FINALLY) 66. What I'm doing wrong here?

  
  

  DECLARE

   CURSOR cur_total_tckt 
   is
   select  t.ticket_id ticket_id, t.created_date created_date, t.created_by created_by, t.ticket_status ticket_status,
  t.last_changed last_changed, h.created_date closed_date
   from n01.cc_ticket_info t
   inner join n01.cc_ticket_status_history h
   on (t.ticket_id = h.ticket_id)
   where t.last_changed >= '6/28/2012 17:28:59' and t.last_changed < (sysdate + interval '1' day);

  type total_tckt_colcn
   is
   TABLE OF cur_total_tckt%rowtype;
  total_tckt_col total_tckt_colcn;
  total_coach_col total_tckt_colcn;
   begin

  total_tckt_col  := total_tckt_colcn ();
  total_coach_col := total_tckt_colcn ();
   OPEN cur_total_tckt;
  loop
   fetch cur_total_tckt bulk collect into total_tckt_col;
-- fetch cur_total_tckt bulk collect into total_tckt_col limit 100;
   EXIT
   WHEN (cur_total_tckt%NOTFOUND);
   END LOOP ;
   CLOSE cur_total_tckt;  

  dbms_output.put_line(total_tckt_col.LAST); 

   FOR i IN total_tckt_col.first..total_tckt_col.last
  LOOP

  dbms_output.put_line(i);

   END LOOP;
   end;

  Jocelyn says:

  This is a modified version of your code on the standard table EMP in schema scott.

  Have you tested it? All you have is last batch has 4 rows. But you print outsite the loop. That way if the last batch is incomplete (within boundary lines) last batch does not have your loop. Suppose you want to print the enames:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of the total_tckt_col 5;

  EXIT WHEN cur_total_tckt % NOTFOUND;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER

  PL/SQL procedure successfully completed.

  SQL >

  As you can see, it didn't print the last batch. Why? Because NOTFOUND is set to true if the number of lines that you asked to fetch was not recovered. This last batch has 4 rows while the claim code to get 5. Therefore, NOTFOUND has the value true and outputs code before dealing with this last batch. Therefore, repeat the treatment code again once outside the loop:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of the total_tckt_col 5;

  EXIT WHEN cur_total_tckt % NOTFOUND;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER
  ADAMS
  JAMES
  FORD
  MILLER

  PL/SQL procedure successfully completed.

  SQL >

  But you have to accept to repeat that twice the processing code is no better solution. When you use BULK COLLECT LIMIT we should not leave NOTFOUND but rather by collection.count = 0:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of total_tckt_col 6;

  WHEN OUTPUT total_tckt_col.count = 0;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER
  ADAMS
  JAMES
  FORD
  MILLER

  PL/SQL procedure successfully completed.

  SQL >

  SY.

• Web page moves to the left when you use the buttons of the anchor

  I almost finished the design of my site in Muse. All previews OK in the Viewer to Muse. When I preview the page in Chrome there is a problem. Everything works great until you use the page with anchor buttons. When you scroll it centered, but when you use anchor buttons all over the page, and especially everything on it moves upward and to the left. Once he goes left, he remains left. Anchor to the left buttons are pined. They stay in place all the time. There is a photo pinned to the right and left in place also. The Web page containing the achor buttons goes to the left when using the anchor buttons pinned. All other pages on the site remain focused. The option "Center horizontally' is checked in the options page for each page. What should I do to avoid that page travel biased?

  There is a void textframe top right of your page. Please see the screenshot below. Detached and reprint should solve the problem.

  

  See you soon,.

  Vikas

• How to enter the character ü when you use the pinyin keyboard?

  How can I enter the character u when you use the pinyin-simplified keyboard, for example, for the opening of the syllable nu with your 3.

  The keyboard pinyin-simplified is for entering the characters han, not latin.  If you want to type the latin pinyin, you must use the extended ABC keyboard configuration.  A list of the shortcuts is to

  http://symbolcodes.TLT.PSU.edu/accents/codemacext.html