His delay in using the DVD/CD drive on Satellite a series

Similar Questions

• How to use the second HARD drive of Satellite A210 - BP1 for mirroring

  Satellite A210-BP1 came with 2 HDD (160 GB).
  Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
  This should be done without supervision and in real time - as a RAID 1.

  How can I do this?
  I also have Vista professional available and I would be willing to use 3rd party software as well.

  Thanks in advance for your answers.

  Hi Jan

  I doubt that this is possible
  Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
  Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

  Therefore, the final answer is; NO, it is not possible to use mirroring

  Concerning

• How to install the recovery on 5200 satellite image using the DVD USB drive

  Hello

  I have a problem with a 5200-902 Satellite that has the corrupted DVD - ROM, and I can't find the room to change. (model DVD: uj - 810 b)
  But I would like to reinstall the laptop with the recovery CD and I will not be able to enter the BIOS to change the boot order and start with a USB DVD - ROM.
  I removed the HARD drive and reinstall the WXp Prof by another machine, but when I restart the 5200 I read this message "error nel caricamento del operating system."

  When turning I press F2-F10-F12 but if I select another boot device starting the laptop by network.
  Can you help me get this book by an external USB DVD-ROM?

  Thank you

  Andrea

  There is no test in the past, but I guess you have to do on the track:

  Start your laptop by using the MS-DOS boot disk
  Load the MS-DOS driver for external DVD drive to access
  Boot the CD of facilities here in the hope that it will market

• P20: cannot use the DVD - RAM drive after installing a trial software

  Hi members,

  I am using Toshiba satellite P20 - 604 model - load with windows xp prof - SP2. I wasn't able to use the software from burning DVDs successfully, so I tried to install cyberlink Power2Go software (trial ver) in there and ended up with "No. DVD RAM DRIVE APPEAR" in my computer. I could see the device dvd - ram with a yellow exclamation point in Device Manager. (the drive model is MAST * A DVD-RAM UJ-811). I tried to update the driver for it, no use. No idea how to recover the original driver and make it available for use dvd - ram drive? waiting for your valuable solution.

  Thank you & best regards

  M.Kanagaraj

  Hello

  The easiest way is to use the system restore option if you have created a restore point before you have had an experience with the trial version of Power2Go. If this is not the case, check if there is a system restore point has done in recent days.

  Good bye

• Re: How to use the second hard drive in Satellite A300?

  I got a second hand Satellite A300 which was to be thrown out due to a defective DVD.
  I fixed the DVD and have a perfect system.

  On opening the box, I discovered that there 2 x 250 GB hard drives. I checked CMOS and show the 2 drives. However, Vista displays only the a drive.

  Excuse my ignorance, but how do I access to the second drive?

  I have Satellite A300 with two hard drives and each HARD drive has another operating system. Both hard drives are recognized correctly.
  I put t know what the problem is here, but the two hard disks should be recognized automatically.
  Try to set the BIOS to default settings and check again.
  Try to start the check and install Microsoft bootable disk if the two hard disks are displayed in Setup.

  I just hope that there is not a hardware problem.

• His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, graphics driver re-installed

  no longer works because

  His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, reinstalled video card driver

  I start the program and then it will begin to Flash white and black.

  On my machine of Tablet and desktop

  I use win10 on both

  need illustrator very soon

  It works again!

  I realized that I had installed a security plugin in order to access my bank account. It was the Warsaw by the GAS technology. I removed it and Illustrator came back to life! No more black and white flashing and slow down.

  I hope this helps! (:

• M30 - 107 - replace the DVD - RW drive?

  I replace the DVD - RW drive in my laptop. I was wondering if someone could tell me the steps that would be involved in it, or else where I might be able to find this information.

  Thank you!

  Hi Philippe,.

  Feliks is altogether correct with his comments about your request. Because the device is "fixed" in your notebook will invalidate you your warranty if you replace yourself.

  However, as with most laptops, CD/RW can be removed if you really want to. It is normally split into place and then fixed by one or two screws. For example, my A30 is secired by a single accessible screw from the base of the laptop. I don't know about the model M30 you need so you will need to check where it is attached.

  Once the screws are released, the unit can be slipped out of its slot.

  You should then be able to find the label on the device and this will tell you the serial number and model.

  If you are replaceing with a similar device, then you will probably have to remove the plastic frame and cut panels and mounting brackets and adapt them to the new unit.

  Replace the unit and the re - fix it with the screws and the work is done then.

  You can, of course, replace your device with another (Toshibe notebooks) do use several different, but there is no guarantee that you new unit will work properly without having to install new drivers for it.

  HTH

• Qosmio F60 - change the screen settings when you use the DVD player

  When I try to play a DVD using the DVD BD player a message that tell me to change the setting of the screen I followed their instruction to no availo. I am running Windows 7. The DVD plays on windows ok support.

  Any help would be appreciated

  Hi ametec.

  This DVD BD drive has been preinstalled on your computer?
  Which message get you exactly? Maybe you can download a copy of screen or something else

  In my opinion this problem is only related to this because the Media Player DVD player everything works
  For example, I use VLC media player for all my audio and video files. It s a small freeware player that can play most audio and video files. In addition it s not necessary to use a special DVD playback software.

• Satellite L500D - replacing the DVD - RW drive

  I have a model of Satellite L500D PSL T6A-015003. (portable)

  Recently I placed a CD in the DVD RW drive and the CD did not play.

  When I removed the CD, the disc of black Center that keep the CD etc up to were broken on the disk. The black disc was stuck in the CD I pulled out and a small piece and spring also fell out.

  Can I get a replacement black Center disk or do I have to buy a replacement DVD RW drive. If I have to buy a replacement drive, can someone please tell me where I can buy one, I'm in Toowoomba, Queensland, Australia.

  I have a few details to the reader, these are:

  HL data storage
  Super multi DVD re writer
  Model GT20N (7 7 ATAK)
  Serial number BOCRGTB831062

  I appreciate any help on this

  In my opinion, you should buy another ODD and of course identical. You have any important data on this piece of hardware so use Google and check if you can find an online store in your country where you can order.
  In the worst cases contact the nearest Toshiba service provider and ask if they can order it for you.

• Need driver for the DVD-ROM in my Satellite A100-812

  Who can help me with the driver for the DVD-ROM in my notebook? It's a rug * a UJ-850 s. These days he asks that whenever you load a disc (CD or DVD) if I want it to be formatted. All that s what it does. I tried to find the driver for peut-t, but I find on the Web. Can someone help me solve this problem?
  Thank you

  Hendrik

  There is no such thing as a pilot for ODD (optical disc drive). It uses the standard Microsoft driver. Try please remove the disc from the Device Manager, then restart the laptop. After reboot the ODD will be detected and installed it again. Check please if the problem persists.

  If yes I recommend you to install the driver for DVD-RAM (DVDForm Utility). You can find it on the download page of Toshiba. I use the 3.0.9.0a version. and it works perfectly.

• I already have one zero drive for FCP 7 projects implemented.  I would use the same scratch drive for FCP 10.  Is there a special way of implementation is seamless?

  Said to implement the scratch disc so I can use the same hard drive for FCP 7 and 10 projects - something on a folder separated for 10 projects.  What are the steps to do t his?

  More details would be useful. You have already imported media in FCP7? Or you are just starting to work with both applications at the same time? What application you plan to use to ingest media? Don't try to use them both for ingest.  You can set FCPX to use the FCP7 Capture Scratch location for your support and then let the media imported in place. You can also assign a location for media to import using FCPX and then use this location for FCP7, again leaving the media in place.

  Or I totally misunderstood and you only talking about using the same drive, which is not a problem at all.

• Laptop HP G60t-500 - cannot find the DVD burner driver

  Hello

  I upgraded my laptop G60t-500 for Windows 8.  I had to reinstall some of the drivers in compatibility mode and overall, it works ok (thumping audio does not work, but I get audio with USB speakers) However, I just noticed that the DVD RW drive does not.  In Device Manager, the hp DVDRAM GT20L reports the following error message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  I was looking on the site of HP support pilot for the original drivers for the DVD RW drive but can't seem to find them.  I found the HP DVD Play software and I was wondering if it needs to be reinstalled.  Or I have to look elsewhere for the device driver?  Or should I uninstall and leave the machine to find the driver.

  As a record, when I right click on the device in Device Manager and select "Update driver software", select the option to let the computer find the right driver, he again reports the correct driver is installed.

  Any help would be greatly appreciated.

  Thank you

  Carol

  Thank you, Vidya.  I had to reboot and now my machine 'sees' the DVD player and it's working (I tested it using a DVD for playback and serious files).

  Thank you!!

• need to repair the startup of windows, files, but cannot use the cd-rom drive

  for the past 6 months that I had to use a return to the top of the boot disk to get windows to load so I could copy all my important files and documents on DVDs as my windows xp edition home sp3 OS suddenly stopped wanting to load normally and I'd just reformat the HD

  Last week... my browser froze causing me to have to stop by turning off the power button... to restarting my pc, my cd-rom drive is not found and now I am unable to finish to copy my important files and these DVD

  is there anyway I can repair windows without using the cd-rom drive... .. I can get in the F12 boot menu but not in the installer of F2 or F8 safe mode without using a cd-rom drive to launch the boot disk

  2.2 under Win XP home edition sp3 dell xps 210 system, intel duo core processor 4 GB ram and 500 GB HD

  It has only 1 CD/dvd-rom combo drive and 4 smaller slots for memory cards and other... I have 3 slots open usb but do not have the files of windows to a flash drive recovery

  would it be possible to make a recovery file or file on a USB stick the size of a flash drive and boot would need... currently the largest one I have is 4 GB

  Hi storm36,

  You must have the Windows XP disk to repair Windows. As the CD/DVD drive is not getting detected, we recommend you try the following steps and check the result.

  Step 1: Check if the device is detected in the BIOS (basic input/output device)
  a. start your computer and press on delete key continuously to see the BIOS.
  b. check if the CD/DVD device is detected.
  c. If this isn't the case, then unplug the unit and he reconnected inside the CPU/Tower.
  d. check the result.

  Step 2: If the device is detected in the BIOS, try the following steps:
  a. start your computer and boot to the desktop.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. select my computer, click the Action menu and click scan for hardware changes.
  d. check if the CD/DVD device is listed in the list.

  Step 3: If the problem persists, restore the computer
  see How to restore Windows XP to a previous state .
  b. Once you have restored the computer, check if the CD/DVD drive is visible.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• How can I use the dvd on a xp machine from my pc vista on a network?

  More recent Vista PC my wife only sleeps 1 dvd/cd player.   We need to access two drives at the same time.  I have a dvd on an old xp drive which is on our home network.    How access and use the dvd on the unity of xp to install and run games for my daughter while my software related woman work working dvd player in vista in the background?

  Hi dP36560,

  • When you receive the error message?

  To share settings on Windows vista, see the article below.

  Share files and folders on the network

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-and-folders-over-the-network-from-Windows-Vista-inside-out

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing