His lack

Had to wipe the entire hard drive and start over. Everything is new except the sound. It is a Presario 5320US and I was wondering which driver I can download if available and this will bring back the sound? There is also Windows XP-32. Do not have a recovery for that disk.

Try the download again and it worked!

Tags: HP HP Desktops

Similar Questions

  • I have upgraded to windows 10 now, none of the applications opens saying his lack a file MSVCP110.dll

    I have upgraded to windows 10 now, none of the applications opens saying his lack a file MSVCP110.dll

    I uninstalled the program and reinstalled programs and still get the same error message

    Hi Bret,

    Please visit: error: 'Missing msvcp110.dll file'

    Kind regards

    Sheena

  • Why could not load my Firefox profile, browser does not open and when I try he mentions his lack unreachable?

    I think that firefox was in the middle of the automatic update, which got missed somehow. Then, he never started, and now when I try to open firefox browser I get only a message of yellow triangular exclamation: "could not load your profile Firefox. It may be missing or inaccessible. "I have no access to all the functions on my firefox browser. I'll have to use internet explore and its terribly slow in comparison. Help!

    ideato,
    I couldn't see the wording of the filename exactly as you pointed out, but I ended up doing a file search "*.ini" on my hard drive, which resulted in 359 files found. then I scanned down the column name and entered a "configuration settings" file simply named "profiles" in the folder: C:\Documents and Data Data\Mozilla\Firefox

    I deleted it and opened my Firefox browser! I lost all my favorites, history, etc., but this isn't the end of the world.

    his age since I had no problem on my computer. I am so grateful that you replied and I could get this resolved so quickly! This is the first time I've ever used this type of public support.

    Gerri I can not thank you enough, (((HUG)))

  • where the bar where I can type in a website to go? His lack at the top?

    Firefox on my old computer was the box with "http / / www. ' where I could type a Web site address and go directly to the site. This isn't on the page of Mozilla Firefox when I bring it to the top. Also on the old computer when I went to the internet through Firefox, MSN page came on-screen. This does not now happen with this new Firefox on my new computer - how is it?

    If the menu bar is hidden, then press the F10 key or hold down the Alt key, which should make the convening of menu bar.

    Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

    • Is he missing elements then open the window customize via "view > toolbars > customize" or "Firefox > Options > toolbars»
    • If a missing element is located in the toolbar palette and then bring her back in the window customize the toolbar
    • If you don't see an item on a toolbar and in the toolbar palette, then click on the "Restore default" button to restore the default toolbar set up.

    See also:

  • cRIO 9068 + Scan Engine Support error - even if it is installed on the cRIO, after the deployment of error says his lack

    All,

    I have a cRIO-9068 I try to use the scan mode for. I have intalled all the latest drivers and software as explained. However, when I put my chassis to scan mode, then select deployment all, I get this error on my chassis and all my modules:

    "The current module settings require a NI Scan Engine support on the controller. You can use Measurement & Automation Explorer (MAX) to install a software package recommended NOR-Rio with NI Scan Engine support on the controller. If you installed LabVIEW FPGA, you can use this module with LabVIEW FPGA by adding an element of FPGA target under the chassis and drag and drop the module on the FPGA target element. »

    Everyone knows this or know why labVIEW does not recognize that the software is installed on my cRIO or is it not installed correctly?

    AGJ,

    Thanks for the image. I saw a green arrown beside all my pictures of chip and it seemed that meant that the software wasn't really being installed. I formatted my cRIO and did a custom install. My problem was that I had the two labview 2013 and 2014 installed and the cRIO put conflicting versions of software. After doing a custom installation and choose only the versions of 2014, my picture now looks like yours!

  • His lack of Panel of volume level

    My volume control panel will usually have an indicator if there is audio playing, but recently it has disappeared. As you can see in the second chart, always we collect these data but it is not displayed. Does anyone know why this is or how to fix it? Thank you.

    .

    Hi Daniel,.

    We are here to help.

    Lets try to check if the volume icon is disabled in the notification area. You can check the post from Anil Kumar B clicking on the link.

    You can also perform a System File Checker to check if there is corrupted system files that are at the origin of the problem. To do this, please follow the steps below:

    1. press on the Windows key on your keyboard
    2. type cmd, then right click on the result, then select run as administrator.
    3. enter sfc/scannow.
    4. press enter.

    Let us know how it goes.

  • Import clips from his lack of Sony HXR-NX5E

    Hello!

    Thanks Adobe to bring us first, but in 2012, according to me, that the import clips should not be so annoyingly difficult.

    I imported clips using "import" and «media browser.» Two ways to let me with picture but the sound is "not there", or sometimes very "crisp/digital." Clips of same see to VLC player works fine, but the sound does not come from my helmet. For some reason, it's using the internal speaker, but it seems OK. I use sony HXR-NX5E, first CS 6 and I am on win 7 64 bit. Don't know what sound card I use.

    Update: prelude (never used before) I can see soundwaves and hear the noise? It is low, but can be used. Now... What can I do to get into the first and preserve the sound?

    Thanks for the ideas...

    G

    Hello!

    Jeff Merci for your help. I discovered that the upgrade of MasterCollection (creation) 5.5 to 6 makes the difference about this problem. Files now import correctly. They are not under MC 5.0 and 5.5. Boring!

    For any other still struggeling 5.5 and the same problems I have no solution, but in response to Jeff:

    1 tried both:

    (a) copy all folders and files of the map

    (b) imported only the master to mts

    2 it is correct. Bad Examplefile, but the same problem on other files with the longest span (check Media Info below another file)

    3 no, but the camera have two bays of card. All content has been saved on this single card. I can't believe that something has been recorded on the other card. That would be awkward and files from one card work in Prelude (poor audio) and VLC as they are.

    4 as well as the rules on the media. Problem is the software/hardware/operating system?

    General

    ID                               : 0 (0x0)

    Full name: D:\PRIVATE\STREAM\00026.MTS

    Format: BDAV

    Format/Info: Blu - ray Video

    File size: 109 MiB

    Duration: 38S 463ms

    Overall bit rate mode: Variable

    Overall bit rate: 23.8 Mbps

    The overall maximum transmission speed: 24.0 Mbps

    Video

    ID: 4113 (0 X 1011)

    Menu ID: 1 (0x1)

    Format: AVC

    Format/Info: Advanced Video Codec

    Format profile: [email protected]

    Parameters of the format, CABAC: Yes

    Parameters of the format, Reframes: 2 images

    Codec ID: 27

    Duration: 38S 400ms

    Bit rate mode: Variable

    Bit rate: 21.3 Mbps

    Maximum bit rate: 22.0 Mbps

    Width: 1 920 pixels

    Height: 1 080 pixels

    View picture format: 16:9

    Frame rate: 25.000 fps

    Color space: YUV

    The chroma subsampling: 4:2:0

    Color depth: 8 bit

    Scan type: Progressive

    Bits /(pixel*Frame): 0,412

    Stream size: 97.7 million (89%)

    Audio

    ID: 4352 (0 X 1100)

    Menu ID: 1 (0x1)

    Format: PCM

    Parameters of the format, "endianness": Big

    Format settings, sign: signed

    Multiplexing mode: Blu - ray

    Codec ID: 128

    Duration: 38S 475ms

    Bit rate mode: Constant

    Flow: 1 536 Kbps

    Channels: 2 channels

    Position of the channels: Front: L R

    Sampling: 48.0 KHz

    Color depth: 16 bit

    Behind the video:-80ms

    Stream size: 7.04 million (6%)

  • his lack-Mac


    Hi all - I am a high school teacher and my students are creating flash animations that they told. My lab runs the latest iMacs not intel with OS 10.4.2 (However, this problem appears in earlier versions of the operating system).

    On some of my machines, Flash applications will not play sounds (Flash MX 2004 AND Flash 8, and Flash player) and all Flash seen by Firefox and Safari. I know that works sound (computers will play another sound) and I know the audio files, they work (they play across other applications). Essentially, it's a constant problem; It's there or it is not; I have a computer that was fine yesterday but now it is not (nothing has changed between yesterday and today)

    I am at a total loss here, found online solutions for a similar question on Windows and Linux, but not Mac. I don't know how to cope. Please, any help would be greatly appreciated.

    Thank you
    -Elyse E


    Strange, strange, strange solution (Mac only). Figured, it might help someone else, so I post here the solution. It's weird...

    To solve the problem of "no sound in flash:
    (1) launch Garageband.
    (2) leave Garageband

    Yes, that's all. I got an animation play without sound. I started Garageband as he played and the noise began to play as soon as Garageband was responsible. GarageBand doesn't have to stay open for the fix to work.

    Hope this helps someone who has a similar problem.

    -Elyse

  • iCloud missing keychain

    I tried to activate Keychain in my iPhone (iOS 10), but felt that his lack in my frame to iCloud. Is there something

    otherwise that I missed the facility?

    Hello

    You have the wallet & Keychain Miss trying a reboot press and hold the power button / stop and menu button

    Hold both down until you see the apple logo.

    Also download ios 10 user guide in ibooks.

    See you soon

    Brian

  • After the restart, firefox starts slowly, a script is not responding and answers continually.

    Hi everyone, I have a true glance.

    My firefox has always worked fine before, but I had to do a factor reset on my laptop and now there is a serious problem.

    After installed, firefox works fine, but after a restart of the computer, it hangs, becomes sensitive and always this message after only 2-3 mins "script is unresponsive script: chrome://browser/content/tabbrowser.xml.2425 ' either press on continue or stop the script does not stop at his lack of reaction

    This problem occurs in Firefox and Windows safe mode. I do not have Add ons installed and I also scanned for malware and there is not. I tried to reinstall clean without result.

    Any help much appreciated!

    In this case the Firefox homepage integrated display and no other site?

    In order to exclude Flash as a potential culprit, could you try one or two of the following ways:

    (1) disable the Safe_mode of the Flash Player plugin.

    The following pages provide different ways to do this:

    Flash must unload completely from memory (Firefox restart might help) before it would take effect.

    (2) the value of Flash Click-to-Play ("ask to activate").

    This will delay the Flash start on a page, until you approve, which will distinguish the questions generated by Flash to load and layout problems.

    To set 'Ask to activate', open the page modules using either:

    • CTRL + SHIFT + a
    • Firefox orange (or the Tools menu) button > Add ons

    In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

    When you visit a site that wants to use the Flash, you should see a notification in the address bar icon and one of the following: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

    Any improvement in these scenarios?

  • HP officejet: Hp officejet 4630 does not print

    I try to print a document from my computer and all I'm getting are dashes or white sheets. I've only used the pronter 4 times because I got it and 2 out of 4 times are to print or copy. There is ink in both cartridges so I don't know why, it's just Govind me white pages. I tried to clean the cartridges and to align it to see if it works, but the alignment page was not printed correctly. His lack of the printer image and most of the lines on who should be present. I know because I still had the first copy, when I did the alignment. I had this for less than a year and hardly used lrinter so I don't know why this isn't the impression that it should.

    Hello!
    Welcome to the HP community @Alewis324,

    I read your post on print quality issues you are facing with your Officejet 4630 and I wanted to answer with my suggestions for troubleshooting.

    Check out the links below and try the troubleshooting steps. If the quality does not improve, contact HP to discuss alternatives to the printer.

    1. Fixing poor print quality
    2. Printer prints a blank Page or doesn't print black or color ink

    If you have trouble, let me know and I'll do my best to help.

    Click on the thumb to below testify my help!
    Click on the 'accept as Solution' if I'm you guide to a solution!

    Best wishes

    HP technical support are available by clicking on the following link:

    http://h22207.www2.HP.com/us-en/?openCLC=true

    (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

    (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

    (3) Once finished, click the "Show Options" at the bottom right.

    (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  • HP Pavilion dv7 - 3188cl: HP Pavilion does not connect to Internet (resolved)

    I recently got a HP Pavillion Entertainment, model number dv7 - 3188cl, for me to use for a class at the school by my uncle. Before the recovery, everything worked perfectly well. My uncle asked me to reset the computer, so we used the recovery disks that wiped the hard drive successfully but then refuses to reinstall the operating system. Instead of getting another set of recovery disks that I've used a Windows 7 install disc to reinstall the OS and he did so successfully with one flaw, the laptop does not connect to the internet.

    I tried to connect via ethernet and it does not find my WiFi network. I suspect his lack a driver and checked for drivers on the HP site but he said that there is none. Any advice would be greatly appreciated, and if there is no driver for this I would be grateful if you could tell me where to download from.

    Thanks in advance.

    Update: after some search Intel had the good driver needed.

    All your Windows 7 drivers (and some) are displayed on your Support page:

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv7-3100-entertainment-notebook-PC-series/4074368/model/4150173#Z7_3054ICK0K8UDA0AQC11TA930O2

  • Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

    My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

    As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

    So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

    As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

    HP should really study this fault

    In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

    Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

    Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

    But no, everything was fine

    Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

    I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

    But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

    I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

    But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

    And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

    It is a mediocre service if you ask me...

    Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

    I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

    PS: Add this post so I can mark the thread as solved.

  • Unable to sync Outlook Contacts and calendar for pre

    I spent 8 hours or more trying to move my contacts to the front.  More than 2 hours with a Palm technician who sounded like he was asleep, knew very little about what he talked and eventually disconnected the call when everything he has tried has not worked. (I was not rude and was very patient with his lack of interest). Tried again today for 3 hours and eventually gave up and took the phone to the Sprint Store.  The hype on the phone was misleading on its incompatibility with Outlook. Being a small business, I don't have Microsoft exchange and do not have time to change my contacts to another system, such as Google or others.  I returned to my dinosaurs Palm 700 p that works very well and will update in 5 minutes. or less with my computer.   I hope that Palm will have a different point of view on the absence of HotSync direct phone/computer.   Otherwise nice phone and features, but must say that pre seems very fragile compared to the Treo and Blackberry. A major concern with the amount of abuse my Treo 700 p gets!

    Check out my post. Not the ideal situation, but it might help.

  • Try to install OfficeJet Pro L7680 via a wireless network on OSX 10.8.2

    It does not work!

    I watched the videos and documents, and the printer appears in the menu of add printer, no matter how long wait.

    I CAN manually add it via the IP address, but it only tri-des works; I can only print B & W and no other feature (fax, scan). I can update the drivers, but the drivers updated... weird, because if I then remove the printer and try and add it again, he will see it as ONLY a fax.

    Router is D - LINK DIR-655, if it's important.

    Summary: can add printer via IP, but it his lack of features, cannot add printer via the normal method.

    Add a printer by IP Yes, never give all the features, usually only basic printing.

    Make sure that your router has the latest firmware and it is freshly restarted by pulling the power plug.

    Download and install this: http://support.apple.com/kb/DL907

    Restart your Mac.

    Reset the printing system:

    -Go to System Preferences > print & Scan
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

Maybe you are looking for

  • HP mini 1000 enter current password computer

    mother-in-law is unable to access his laptop. When it turns on, it comes up to enter current password. Try 3 times and the error pops up. cnu9102hds. need password please

  • Can not burn on erase CD-RW/DVD-RW and CD - R, DVD + R, DVD-R

    I have a Dell Laptop with Vista SP1 Professional Latitude E6500 on it. A colleague of mine and I cannot understand why these laptops will NOT burn on all disks. Here are the following things we tried:-Replace the CD/DVD-RW drives, twice.-Change of re

  • compare 2 backup sets

    HI -. I have 2 separate sets of backup of Windows Vista from a now-defunct computer. How can I compare the contents of the sets to see what files are in two of them and which files are unique to each game? Thank you!

  • Assign different VLAN wireless authentication

    Dear Stephen, I want this product fits the following situation? The user will use their laptop to assign the internet by the following situtaion. 1. they will go to a web portal to choose their internet service provider and connecting to services. 2.

  • No icon menu in the Simulator

    Hi all I have just download the jde for eclipse plugin and I'm having some problems with it. I can test several simulators, but I can't find the application icon in the main menu, or in the downloads folder. IM using jde 4.3 pack component to develop