His problem Intermittent Sound-'Windows Audio Endpooint Builder fell down'

Similar Questions

• No sound, cannot start Windows Audio Endpoint Builder service, RPC server not available

  I had the audio works fine, so I checked a few services that are sure to value manual, and now I have problems with my audio. I went to all the necessary services that should be started and all have the value automatic and running except for the Audio service of builder endpoint, windows audio service and service audio creative.

  When you try to start the audio endpoint Builder service windows I get error 1722: the RPC server is unavailable.

  I can't start the service windows audio either. I get an error 1068: the dependency service or group could start.
  I tried to change the local system account log in info and now I get a different error message: 1079 the account specified for this service is different from the account specified for other services running in the same process.
  I tried to uninstall my sound card drivers (creative audigy 2), my pilots on board her (AC97) then reinstalling both, no chance.

  I am running Win 7 Ultimate 64

  I am also having a problem with my USB keyboard goes dead. the backlight stays on, but none of the buttons will respond. I have to unplug the USB and use it to hold back in order to reinstall. It seems that if I do not use the keyboard for a while it turns off, but the lighting. I disabled in the power of USB energy saving profile, and the problem persists. My mouse does not turn, so I think it is not related to my power profile. It's a keyboard Saitek Gamers (USB).

  Any help would be appreciated.
  Thank you
  Alex

  ETA *.

  DCOM Server process Launcher started, automatic
  Plug-and-Play started, automatic
  Multimedia class Scheduler started, automatic
  Remote procedure call (RPC) started, automatic
  Windows Audio Endpoint Builder not started, automatic (error message 1722)

  Update #2 that I was able to get the right connection info to get rid of the error msg 1079.
  I typed in NT AUTHORITY\LocalService and left the empty password.
  now, I get the same msg of error as a generator of endpoint... RPC server is unavailable.

  Edit # 3
  I turned on the power and everything started working as usual.
  except that I still have the problem of keyboard.
  Thank you

  I guess the problem with the Windows Audio endpoint builder, it's that you have disabled the Windows on Windows 7 power management.  For some reason, the audio services cannot start if power management is disabled.

  I was going to install the software for my UPS APC power management and requires that the Windows power management is disabled.  I disabled the service and rebooted the system and noticed that the audio services is not started.  You try to start their hand gave the errors you mentioned.  When I started the service of power management, I was able to start audio services.

  Microsoft does not mark as services that depend on it, but there is a relationship.  I know that in Windows 7, which they said he optimized use of energy for the audio and I guess audio services are looking at power management to see what type of profile is in use.  Because power management does not work, it is unavailable and terminate the audio services.  Again, this is just a guess, and I can't find definitive answers to this topic.

• Restart the Windows Audio endpoint Builder Service?

  Poverty and economic hardship MS caused me by disabling my 3 computers with incompatible drivers in the forced updates! For example:

  How can I restart my sound by restarting the Service Windows Audio Endpoint Builder?  According to the Services snap-in, this is why I have no sound. And I really need the Narrator because I have bad vision.

  I am the SMA, no problem, but he needs another permission and I don't know what it is.

  Hello

  Isolate us the problem by answering the following:

  1. Did you get any error messages?
  2. Did you do the changes on your PC before this concern?
  3. What are the updates in your PC?

  You can check if the driver is already installed or updated by check on your Device Manager under sounds, video, and game controllers.

  You can also download and run the Windows Update Troubleshooter on this link.

  Thank you.

• Problems with sound and Audio - realtek hd audio is not compatible for the audio device

  I use Windows XPand receives my sound and audio to work, I got a lot of response to this problem, but not the right answers, I got my sound set correctly but my audio does not work. In my default audio device is defined as realtek hd audio that is not compatible for the audio device, I tried to remove it without any success because I don't know what else can be done to solve this problem. I did an update can also be found a update driver for my sound card in windows. I also run microsoft fixi it and said that my default audio device is wrong, I tried to change, but nothing seems to work. Before that my computer was working fine and now all of a sudden nothing works. Everthing is up-to-date on my computer except the I'm having problems. all I ask you, how can I removed realtek hd audio since I graduated from the audio device by default.

  Thanks for a quick reply.

  Hello

  You will remember to do recent changes to the computer before the show?

  I suggest you to download and install the latest driver audio realtek for Windows XP from the link and check if the problem occurs:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Problems with endpoint Windows Audio and Audio service

  My PC decided that the copy of Windows 7 was no stay true even if he was.

  I had to go through several different solutions to correct this, but by train to try, I tried to use "performance issues" under the control panel > everything on the control panel > performance information and tools > advanced tools.

  Identified computer sound problems caused performance problems and proposed to correct. It seems that what he actually did was disable Audio endpoint and audio services.

  I tried to reset to automatic in the section of the Task Manager services (and they may be started for this session on the PC so there) but when you restart the computer, they are the two dump again.

  Any suggestions on how this can be corrected?

  Hello

  Thank you for the update on the issue.

  If you receive an error message that the Windows Audio Service is disabled. So firstly, I you suggest to start the service and then try to check the status of your problem. I suggest you try the steps in the below mentioned thread and see if it helps you to solve the problem.

  Any solution for "The Audio Service is not running"?

  Hope it would help. Keep us updated on the issue and we will be happy to help you further.

  Kind regards

• Problems with error Windows Audio and Control Panel "one or more of the audio service is not running.

  I'm a bit of a technophobe, but I'll try to explain my problem, I got better.  I recently had a problem with Windows 8 and refreshed my system.  After refreshing, I installed AVG Anti-virus and that's where my problems really started.  After installing AVG I have no sound and my control panel usually pop up.  The box is displayed but there is nothing in it and it sorts just of sticks, frozen.  I tried the fixes recommended to fix my sound. The speaker in my taskbar icon has a red x on it and when I try to open it it goes right to the problem-solving mode, then comes up with "one or more of the audio service is not running.  When I try "run services.msc' and try to start Windows Audio through Services I get error 0x800706cc.  I tried to uninstall AVG and reboot, but it did make a difference.  Please help, this leads me to the madness now.  Nothing I try seems to work!

  Installation of AVG is when the problems started, I would start by undoing that.  Since the normal uninstall did not help, use system restore to return to a work situation.  Check here and use the #1 option.

• No sound, Windows audio services is 'Automatic' but not 'started '.

  My PC runs Windows 7 (Vista upgrade) has a sound card, downloaded the newest manufacturer of PC sound card driver.

  Using "services.msc" and then found Windows audio services is set to "Auto" but not "started".

  Then click on this point, a new window appears which does not have a button 'START '.

  After pressing 'START' and then he said "failed to start audio service of windows on a local computer.

  "1068" error code

  ===========================================

  There is a program that can fix it: but do not know how much it costs, and if it works.

  Thank you

  Skip

  PS: I forgot the the 'password of the administrator", I bought this computer and I'm the only one using this computer.

  The suggested solutions for trying, shouldn't the password, because I won't be able to try.

  Update: tried "System Restore", he said that the system restore does not work correctly.

  I've been using other computers within the home and have not used this computer for a long time after the upgrade from Vista to Windows 7.

  There are a lot of suggestions, I tried it (suggested by someone here). :

  Define 'multimedia class Scheduler' to 'automatic '.

  Set the 'Plug and Play' to 'automatic '.

  Restart the computer, then checked "Windows Audio services.

  now, he says "Started" and "automatic".

  It works fine now.  Sound is back.

  Thank you very much.

  Skip

• problem of sound quality (audio surge)

  I use Windows Vista. Toshiba Satellite (laptop) L350D
  When I listen to audio from my media library, if I use the windows media center or windows media player, I have sound problems. Looks like the music is booming.
  I copied all my files and tried it on a friends pc, the wave is not there.

  Also...

  When I burn a disc from my laptop, this problem of the sound quality is not transferred to disk.

  This laptop has done because it was new, I bought it in January this year.

  I had to remove WMP and WMC and reload, but I don't think it's a problem software, currently, this problem is with both programs.

  Help, please!

  1st try this

  Close all programs

  Click right click right icon "speaker" - reading - in Box - SHOW off and disconnected devices
  Devices - if they are disabled (highlight as appropriate - properties)

  Now select speakers - properties (lower-right) - Enhanced Tab - check DISABLE sound effects.

  Under the general tab - tab drivers controller information - properties -.

  Please tell me provider - driver version and date.

  APPLY/OK on

  What version of windows you have, and 32 or 64 bits.

  Your laptop is a L350D-Sxxxx can you tell me the number of entire model with this Sxxxx

  (look on the back/bottom) or on paperwork or box.

  There are quite a few updates audio driver for your system, and we must get the best/most recent
  driver Toshiba or Realtek (RealTek audio HD makes your system probably uses I'll
  confirm one I know the info.)
  Rob - bike

• Get his problem after installing windows update on May 18, 2016

  Original title: updated 18/06/2016

  Has anyone else been having sound problems with the new batch of updates? I tried to download the drivers, but that didn't work and now I had to restore my system from the 18th daily. Any ideas on how to identify the update is the cause or what driver I may have missed? My computer is a Dell Latitude E5420, running 64-bit Windows 7 Prof. Any other information needed let me know. Thank you!

  Hello

  According to the description, I understand that you are facing the problem in your computer after Windows installation updated May 18, 2016.

  Yes, you can view the installed update so that you can identify the updates that are installed in May 18, 2016.

  Please follow the steps to see updates history in Windows 7:

  1. Click the Start button.

  2. Then select Control Panel > programs.

  3. And then, under programs and features.

  4. Select view installed updates.

  View update installed please check that the update installed in May 18, 2016 and uninstall the update one & check if the sound is working well and find the culprit, update.

  Please follow the methods described below to check if it helps:

  Method 1: perform a Clean boot and install Windows Update.

  If its a major update, I recommend you put the computer in a clean boot state and install it again in order to minimize interference that could cause this noise problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: uninstall and reinstall the Sound Driver.

  1. Press Windows + X key.
  2. Type devmgmt.msc (to open Device Manager)
  3. Find and select the audio driver.
  4. Right click on the driver.
  5. Uninstall the audio driver.

  Windows automatically installs the generic driver, otherwise I recommend you download & install audio driver on the website of the manufacturer to check if it helps.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."

  original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running."  What should do?

  When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem.  The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?

  Content in double wire-
  "When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »

  Hello

  1. are you able to hear the sound after the error message?

  2. you have an an external sound card or internal, installed on the computer?

  Method 1:

  I suggest you to follow the steps and check.

  (a) click Start

  (b) type services.msc in the search box, and then press enter.

  (c) scroll down to Windows Audio and Windows Audio endpoint builder of Point

  (d) both should be started and set to automatic if one or both are arrested.

  (e) click the name to select it.

  (f) click on restart the service at the top left.

  (g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.

  Method 2:

  I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.

  To uninstall the Device Manager sound, proceed as described in the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Find the audio driver in the list, do a right click and Uninstall.

  You can also download the drivers from the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  If the steps do not help, I also suggest you to run a scan of the System File Checker .

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Hope this helps and keep us posted.

• I have trouble with my Audio. Multimedia Audio endpoint Builder Services class Scheduler & Windows.

  0xc1 193 error: appears when I try to run these 2 services, Windows Audio needs these 2 services began so that audio windows can start up fix the Circle Red & White 'X' which appeared on my volume icon in the bottom right, so that my audio can work.

  Multimedia class Scheduler

  Path to executable: C:\windows\system32\svchost.exe-k - netsvcs

  Windows Audio endpoint Builder

  The executable path: C:\windows\System32\svchost.exe k LocalSystemNetworkRestricted

  The two executable path in Services' and the path of the Image in the registry editor "" are the same for the two Services above.

  I need to know how this can be fixed, and I tried to do a system update previous but without success, the restore has failed.

  Hello Canofolives,

  Please keep us updated on the status of the issue.

  Have you tried using all the advice in the previous post?

  Please refer to the suggestions of Vaseem Ahmed replied on January 20, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-error-193-has-occurred-is-not-a-valid-Win32/be04aba0-AFC0-475e-A41F-ebc399318a5d

  Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• Problem of sound with Skype only - HP Pavilion laptop Windows 7 x 64

  I have problems with the sound with Skype only - all other software that requires a sound work fine.  I don't hear my correspondent.  My Skype settings seem to agree and I get no error message.

  I run 7 x 64 window.  I have a laptop HP Pavilion G7.

  Any help?

  Hello

  Sorry, you have problems. For Windows 7, try this:
  
  Sign in to Skype. Click Tools at the top of the window, and then select Options in the menu drop-down. Click Audio settings in the left pane. Under the speakers, you can:

  • Use the Volume slider to adjust the volume.
  • Click on the arrow down in the drop-down menu to select the appropriate stakeholders.
  • Test the speakers by clicking on the green arrow next to the drop-down list of speakers.
  • Click on the link to make a free test call to make a test call.

  It may be a good idea to plug a headset as a test to see if it works. You don't need a headset with a microphone; Just use any headset allows you to listen to your music on your iPod. The nice thing about using a stereo headset is that you can always talk through the microphone on your computer, but only you will hear responses from your correspondents, and is as much your comments.

  Skype has a document of support practice that may help you: I can't hear my friend... (Windows desktop) .

  And now, the delicate question: it is possible that your friend accidentally cut his microphone? Or what is happening with all of your calls?

• How to add the endpoint Builder service windows audio

  I can't start the audio endpoint Builder service windows because it is not in the services folder. How to retsore this service. Reloading windows has absolutely nothing. The windows Fix - It _ jack tool. I'm not interested in a solution for Windows 7, I am running XP

  AWE, that explains that.

  My 'Sounds and Audio Devices Properties' Panel is grayed out and I can't choose my new outboard USB sound card, my volume button is red x ed out.
  Any help?

• Windows XP my sound recorder audio device is a DODEC Audio USB, the volume and advanced is grayed, how do he turned the back?

  I just installed a turntable to record albums. I installed everything simply by following the instructions. The volume of the sounds and advanced recorder is grey and everything I do doesn't change it. Can someone help me?

  Hello

  You can view these methods:
  Method 1

  Download & install the previous version of the drivers for the sound card and check if it solves this problem.

  1. type devmgmt.msc in the search box start and press ENTER.

  2. in Device Manager, expand the audio drivers listed in the list of devices.

  3. right click on the audio driver > click Surdesinstaller.

  4 restart the computer and install the downloaded software.

  Method 2
  
  In addition, if you use a recording program, update or reinstall the program registration.

  Method 3:

  Please follow these steps to enable the "Windows Audio" service:

  1. Open the control panel of Windows XP by (depends on your settings in Windows):
     By clicking on "start > settings > Control Panel.
     By clicking on "start > Control Panel.
  2. Open the "Administrative Tools" Panel by (depends on your settings in Windows):
     Double-click the control panel 'administrative tools '.
     Click on "Performance and Maintenance" and then "Administrative Tools".
  3. Go to 'Services' Control Panel by double-clicking it.
  4. Locate the "Windows Audio" service.
  5. Check the "Status" column to see if it is disabled.
  6. If it is disabled, click with the right button on the "Windows Audio" service and choose "Properties".
  7. On the general tab, change it "Startup Type:" drop-down on "manual".
  8. Restart your computer.
  9. Follow steps 1-6 to open the properties of the Audio service 'Windows'.
  10. Click on the 'Start' button to activate the Audio service 'Windows'.
  11. You will now be able to change the control panel 'sounds and Audio devices '.

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on