His record game do not work with Schroeder

Similar Questions

• A few arcade games will not work with the latest version of Flash Player

  I played a lot of arcade games to my hobby

  site and some games display the sign, I did not

  have the latest version installed and a link to some games here.and

  appears with black screen and with the humble mouse click

  text "movie not loaded" on the flash about text of player.

  It makes me very frustrated. I need help! Please, I beg you!

  Thank you, doctor, if you mark your thread as answered, this will help other people who might have the same problem

  a much easier solution. They are unable to play arcade games, but many play other games on the internet.

  Thanks again,

  eidnolb

• His record game will not play in safe mode

  There is no audio service available when you run the computer in safe mode

  This is because it is not supposed to be. The drivers load in safe mode.

• Why xbox 360 controller does not work with all pc games

  Why xbox 360 controller does not work with all pc games

  Ask in an xbox forum.

• CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  At the same time recording tool was not possible and if you install Adobe Scriptlistener plugin Adobe will disable the recording of the tool its never an option.

  I use and record the actions all the time and was looking forward to the registration tool when Adobe announced it.  But I found what they delivered was very limited because of the restrictions. I don't like that Adobe disables the registration on my machine tool.

  The amount of data that gets reorganized also seems to vary between machines.  I found that Action recorded on a fast machine are not usable on a slow machine.  Recorder fast machine too much data.

  You use this action on the documents must also have the same size and resolution as the document that you have saved the action on. Quite a restriction.

  You can also be foxed in 2014 CC sett here Photoshop CS6 - recording of the clone in an action tool works incorrect on replay.

• McAfee Site Advisor does not work with Firefox 6.0.1

  Different Firefox users have reported not being able to use McAfee Site Advisor with different versions of Firefox. I have the version update of Firefox (6.0.1) and have been able to use the Site Advisor until September 3, when I renewed my subscription to McAfee Internet Security, which includes the Site Advisor. Now Site Advisor no longer works with my Firefox browser.
  McAfee says that Site Advisor does not work with the "Beta version" of Firefox, but I'm not using the beta version. When I informed them of this, their response is, indeed, "Is not our problem."

  Any suggestions?

  What version of Site Advisor do you use?
  I have re-installed the latest version of Site Advisor which is 3.4 and his works fine for me on Firefox 6. Installed from their website www.siteadvisor.com

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• Diablo 1 does not at all, 12 years old game does not work on the new computer

  Hello, I have a Toshiba Satellite P200 with Windows Vista 32-bit, it has an ATI Mobility Radeon HD 2400 video card. I also have 10 installed Direct x which, according to the manufacturers of my video card is compatible. I ran a test game that was included with the CD and it said that everything is okay. But it is still coming up with this error. "Diablo could not correctly initialize your video card using directX" then it tells me to update my directx which I did. check and update my driver for my graphics card and make sure its compatiable which I did and it's. I've been to Blizzard games, and they said that can not help me and I have to go to the manufacturer of the video card. I went to them and they said because it was a laptop they cannot help me with this and told me to goto, the manufacturer of my laptop that I do at the moment, but if someone had this problem and have any ideas how I can get this race please tell me thanks.

  This game was designed for Windows 95. Of many old games do not work under NT (on XP and Vista) kernel unless you use the emulation such as DOSBox.

  You can try setting the game to run in Windows 98 compatibility mode (click with the right button on the games EXE file, select Properties-> Compatibility tab).

  Otherwise, you will need to install Win95/98 and possibly to use a video card more old since display drivers change so rapidly and drop the old features not more used.

• Satellite L50-A-19N - need to update driver nVIDIA - some games do not work

  Hello

  I have the problem with drivers nVIDIA for my 740 M,
  The thing is that I can not update drivers because any drivers I have install my core 580 MHz GPU clock drops everything at stake. But when I return to the first drivers that I had on my base GPU clock portable (326.60) is 1058 MHz all-in game.

  The problem is that I can't run some games because I need to update the drivers.
  Just some games do not work on 326.60.

  I tried to contact customer support, but the page is not available. -.-'

  Hello

  First of all, please note that use of the 3rd third-party drivers is at your own risk.

  You must use the drivers supplied by Toshiba driver page because these drivers are changed and designed for mobile use.

  This driver supports the overheating protection, which means that in the cases that the temperature of the GPU would rise to higher level, the driver would clock down the GPU to maintain the temperature at the lower level.

  Of course, as I said above, you might try to test the drivers from nVidia page but it is at your own risk.

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• A30: Laptop does not work with battery

  I suddenly can not feed my A30 by battery. The battery is entirely servicable as it works in friends A30 and his spare battery does not work in mine. Works very well with alternating current. All the power settings seem correct, and I have the latest version of the bios updates installed. Any ideas?

  Hello

  It's maybe something s wrong with electronic battery power.
  I m not a technician in this case I can t give you an appropriate response. But as Daniel says try to contact Toshiba.

  Good bye

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• MS Sidewinder joystick does not work with MS Combat Flight Simulater WWI

  Works very well with Flight Simulator X, but will not work with CFS the second world war.   Further research online and via the extremely complicated site of MS did not success.

  Any other ideas?

  Hello

  You can try the steps and check if that helps.

  (a) in the Control Panel, opengame controllers. To do this, use one of the following methods:

  ·         Click onstart toreduce this includes this image, typejoy.cpl in the Search box and press ENTER.

  (b) click on your game controller, and then clickProperties.

  (c) on theTest tab, test the game controller to verify functionality.

  Here is the link:

  http://support.Microsoft.com/kb/831361

  Also, try the suggestions in the link given below.

  http://support.Microsoft.com/kb/294672

  Note: Article is for Windows vista, but are also good FRO Windows 7.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Phlinxtogo game does not work correctly

  Original title: "C:\Program Files (x 86) \Pogo Games\Phlinx Go\PhlinxToGo.exe" __My Phlinxtogo game does not work correctly ".

  \Pogo Games\Phlinx to Go\PhlinxToGo.exe

  Hello
   
  1. what operating system is installed on your computer?
  2. What is the exact error message you get?
  3. what happens when you try to run the game?
  4. has been the work of game much earlier?
   
  There is currently no information on the compatibility of Phlinxtogo with Windows 7.
   
  However, you can perform two or three steps and check if it helps.
   
  Step 1:
   
  Once the Phlinxtogo game is downloaded, right click on the .exe file and run as administrator.
   
  Step 2:
   
  If this does not help, run the game in Windows compatibility mode and check.
   
  If none of the suggestions work, I'm afraid you must contact the manufacturer of game for a better support.
  
  Aziz Nadeem - Microsoft

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• No-a-Ref does not work with audio files?

  I use LabVIEW 2013 32 bit under W7 - 64.  When I open an audio file and you write for, for example ref is valid, Not-a-Refnum? function returns True.  Is this a limit known audio file?  The same is true with the example program OR 'His file to the Output.vi' when an audio file is opened in read mode.  The works of VI, but the Not-a-Refnum? is set to True.

  DaveT

  This is a known limitation. The screws of Sound do not use a real LabVIEW refnum, they take advantage of just the type of file refnum to conceal their own internel reference as a LabVIEW refnum That has the advantage that you can wire not accidentally other refnum or integer to these screws, but that it is not working with the primitive IsNotA Refnum(). The node RefnumToPath in any case never could work, even if these screws used a real refnum of LabVIEW, given refnum would be a refnum of Sound specific resource, not a file (normal file or datalog) Refnum, which is type single refnum where the Refnum of the function of the path runs on for pretty obvious reasons, like other resources in LabVIEW are not a valid path.