His record playing that my Pc does not work correctly. It says "no audio output device is enabled.
Please help me with this...
I can't hear any sound...
Go to the website of your manfacturer PC, look for the support page for your machine and then download and install the audio drivers specific henriq W7.
Tags: Windows
Similar Questions
-
I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes. Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?
The last thing you want to do is install and run any third tuneup/Optimizer program.
In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.
-
Get a message that Windows Installer does not work correctly.
Original title: Windows Installer problem
I get a message that my Windows Installer is not workiing correctly. What should I do?
Thanks to all who tried to help. I finally finished on the pone to a tech assistant who could still find a solution. End of the story: crossed the system recovery and I am now busy do everything to come back as much as I can. Thanks again for your efforts.
-
My colleague his computer was broken, it was Pentecost CS5.5 Pentecost installed upgrading pakket.
Now, I got a new PC I took me 3 days to discover that CS5.5 does not work on the windows 8.1 folks even 2 of the cat cant tel me that.
Now, I have installed they pc new windows 7 of the Pentecost CS5.5 so should work on that. but after the installation of the upgrade CS5.5 does not show my CS5.5 pakket now I can't upgrade. and the last time it was Pentecost bij adobe support fixed a remote session bij adobe. now that?
Problem solved by generating a new serial for Photoshop CS 5.5 key
~ Sarika
-
Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.
Someone in the building uses Apple can 790-795 network this person hack me and who is?
Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.
-
I installed my microsoft lifechat 1.4 I can receive my microphone, but when I play my music, it does not work
Hello
· Never work earlier?
Check to see if this article helps you.
-
my mouse is recognized that it simply does not work?
my mouse is recognized that it simply does not work?
Hello
Please join Microsoft Community where you can find the necessary information on Microsoft products!
The mouse does not work.
1. What is brand and model mouse?
2. do you receive any error messages?
There could be a problem with the drivers. To check that I suggest you to update the drivers and check if the problem persists.
Visit the site to update the driver:
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658?WA=wsignin1.0
You also try to get the latest drivers from the manufacturer.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
I can't check the updates, because he said that "the service does not work."
I can't check the updates, because he said that "the service does not work."
Error: Windows Update cannot check the updates, because the Service is not running
http://support.Microsoft.com/kb/2730071 -
Hello. I share itunes with MP3 rocket very successfully. I buy songs from itunes. When I finished, I get a pop up window telling me that Apple Push does not work properly. What is Apple push and do I need it. Everything is working well at the moment. Thank you
Hi Wendy,.
Thank you for choosing to ask your question in the Microsoft forums. The question you posted would be better suited in the Apple forums. Check out the link and ask the question.
-
Photos may not be printed as a service that needs Windows does not work
One morning last week when we turned on the conputer lots of things had changed. I finally got my page online straightened out, but I could not print photos that were stored in the computer. When I tried I got the message "Photos cannot be printed because no printer is installed or a service that needs Windows does not work. And I wasn't able to print with my camera card inserted in the printer. I was able to print the text so that the printer is of course. Can you help me? I must add thaat I was able to print photos using the map to a pharmacy machine then the card is OK.
Wendell Bard
Hello
1. What is the brand and model of the printer?
2. you remember to make changes on the computer before the show?Method 1:
You can perform troubleshooting of the printer and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Method 2:
If the problem persists, you can perform a restore of the system to the point when it was working fine and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaYou can also check out the link:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsFor more information, please see the link below:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print -
When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows. Help
Hello
Try to uninstall and reinstall the network adapter drivers.
Download the latest drivers from the card manufacturer support page.
Download the drivers and extract them to a folder of your choice.
In Device Manager, right-click on the adapter.
Click Update drivers and choose her browse my computer for drivers.
Choose let me a list of choices, click on disk and point to the folder with the drivers.
---------------------------Computer network health.
Check the Device Manager for the entry of valid card of the wire.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).
Turn off the computer and the router, reset the router and the computer.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
On the State of intellectual property.
TCP/IP and its variables usually look like this.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
Typical TCP/IP status looks like this.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
Physical address is the MAC of the card number.The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.* Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
------------------------
Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?
Hi willemm,
first instance LR 6 cc import goes well with different cards, that one card does not work.
Could you please develop the issue you are facing?
What is the image format you import?
USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics
I would not recommend to import gb 115 library at once.
Kind regards
Assani
-
Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".
I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.
I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
entries that do not fix the resolution of problems and those who "could" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
Parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows media Center does not work correctly.
* Original title: Windows Media Center
Downloaded 10 hated windows he returned to windows 7
Now, windows media Center does not work correctly. Very slow to do anything whatsoever at all, let alone play music
Any suggestions please
Try to uninstall, reboot, reinstall, restart WMC according to the http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/ article is for WMPlayer but just to check the entry of WMCentre instead.
If that doesn't help, try a SFC/scannow and see if it detects and corrects something - https://support.microsoft.com/en-us/kb/929833
-
Config Free - Connectivity Doctor does not work correctly
Hi all
yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just to replace it with the classic error message: cfmain.exe has encountered a problem and needs to close...
The details are
AppName: cfmain.exe AppVer: 5.0.0.119 ModName: venapi.dll
ModVer: 5.0.0.3 Offset: 000034dfThank you very much for your support
I found this:
cfmain.exe - this is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility
Maybe you are looking for
-
When to charge your iPhone or iPad
There is a lot of myth and folklore surrounding Chargers of iOS (or in fact any device that uses technology Lithium batteries). A lot of it comes the advice given to older technologies, such as Nickel-Cadmium or Nickel-metal-hydride batteries. None o
-
Satellite Pro 6100 very slow during the installation of Windows XP Home edition
Hello We have installede Windows XP from our CD orig., XP is running very slowly and the mouse freezing of minute-to-minute. We can install Windows 2000 and it works perfectly. Try a new HD with the same problem, it has 512 MB of ram.
-
I tried to open a video on Movie Maker and it won't let me. He said his error 0 x 8007005
I need to create a video for a class and I recorded both my camera and my phone, but when I try to open it in movie maker, it tells me that it is in a format that does not recognize and error 0 x 80070057. What I'm doing! I need for a class!
-
Double switch House to Nexus FEX
Everything I find says that I need to enable BPDU filtering on an interface so that it will not errdisable when a switch circuits. That of course homing stop me a double switch. Am I missing something? Is it possible to configure an interface on the
-
Transcoding is checked, but I'm unable to mark the ins and outs.
'I' key and 'o' key do nothing. Any ideas? They used to work.