historical files won't accept the removable storage like SD card

Similar Questions

• What is normal for the backup of XP SP3 and the startup type of the removable storage service?

  I was getting ready to plan and attempt a clean full backup for tonight.  I have the backups created on several entities, currently backup but have a very stable system at the moment and wanted to try to make a clean backup file.  That day has finally arrived after been forced a corrupted system files hard drive failure "repair" critical and forced me to go back to SP1a (my Windows Genuine valid CD which I highly appreciate) in order to obtain any boot system, including safe mode and console mode.  Repair has presented many incompatibilities at the level of program and system, including the basic WMI and COM of the corruption system.  Three months later... it of time to update my backups and recovery procedures and hope that this does not happen!

  In preparation, I decided to refresh my memory on the use of the backup and by browsing the Help and Support Service Center files.  One of the first things I noticed was "storage removable service must be started for the backup works correctly."  Audit and inspection of my existing Services using computer (Local) management, I have observed that after a normal windows startup, the removable storage service is not started with manual startup type.  I use a USB drive connected as my backup media, and it is fully operational as a normally formatted NTFS data disk volume.  I have windows indexing disabled on this volume.  Is the type of service required removable storage of normal manual started?  The backup program will automatically start this service?  I know I've never manually started it myself and backups seem to work well.  Should we change the startup type to automatic?

  -Thanks, Jerry

  I would like to leave as a textbook.

  The Service will start (if capable) as soon as ntbackup.exe begins.

  If you want to see, with your Services window related to the function of RS place and it will not work and the manual.

  Click Start, run and enter in the box:

  Ntbackup.exe

  Click OK to start the backup and the Restore Wizard.

  Go back to your Services window and press F5 to refresh and SR Service should now work.

  When you exit the backup and the Restore Wizard, the RS Service stops (it may take a few minutes), and you may need to close the Services applet and reopen it to notice she's moved to manual and not running.

  You will see things like present to the event system log viewer:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  The removable storage service entered the running state.

  (this is when you go out the backup and the Restore Wizard and wait a few minutes... then the Service stops itself...)

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Description:
  The removable storage service entered the stopped state.

  It's like aid and assistance...  Most of the people (including the technical support engineers who are hired by Microsoft) say to set the Startup Type to automatic, but you don't have to...  Set it to manual and it will start fine when he needs start (if he can).

  There is no need for these Services (and many other Services in XP) as starting at each restart and run all day without doing anything.

  Here is a good list that will help you understand your XP Services:

  http://www.blackviper.com/2008/05/19/black-vipers-Windows-XP-x86-32-bit-Service-Pack-3-service-configurations/

• What is the removable storage management?

  I just checked the "turn windows features on or off" and I noticed that the "removable storage management" is turned OFF. I used a hard drive portable USB and flash drives since I have this computer without problem.

  What does the "removable storage management"? I can't find something more descriptive than the presentation text short I get when you hold the mouse pointer.
  This is the most I can find:
  http://www.blackviper.com/wiki/Removable_Storage

  If my portable USB drive, my USB key and my DVD +/-RW do not count as removable storage requiring this feature, what?  I use all these devices at least once a week without a problem.

  Besides, someone you will suggest a guide to access descriptions of best of all find under "turn Windows features On or Off? Some are self-explanatory such as TFTP, Telnet and games, but others I'm not sure as RIP. Why would I need RIP on the home (client) version of Windows and why only RIP version 1 that does not support CIDR.

  http://msdn.Microsoft.com/en-us/library/bb540725 (vs.85) .aspx

  You use the wrong search engine. I found enough things for the reading of the week of research management removable storage on Bing.

• Windows Vista does not recognize the removable storage device

  ISSUE INITIAL 2010-03-03)
  Here's the scenario:
  1. Insert the card compact flash.
  2 computer recognizes the removable storage (that is, it is assigned a drive letter and appears in disk management).
  3. use the icon remove the device safely in the taskbar to stop the machine to remove safely.
  4. remove the card compact flash.
  5. Insert the compact flash card.
  6. the computer does not recognize removable storage (that is, it is not assigned a drive letter and does not appear in disk management).

  The only way I can get windows to recognize the drive is to restart my computer. How can I get windows recognize the drive without having to reboot?   This problem does not occur with USB flash drives.

  Windows Vista Hame Premium, 64-bit, Service Pack 2 operating system

  UPDATE (04/03/2010):
  I have more information, I hope this helps to reach a solution.

  -J' repeated the steps above 1 to 3, with open Device Manager.  In step 3, in the Device Manager window, the icon for the question USB mass storage device becomes the exclamation point in yellow triangle icon.  Check its properties on the tab "General", in the "Device status" box, it says: "Windows cannot use this hardware device because it has been established for"safe removal", but it has not been removed from the computer. (Code 47)  IX this problem, disconnect the device from your computer and then reconnect it.  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
  -J' then removed the card and rest of the error state.
  -J' I re inserted the card, and rest of the error state.
  -J' I then tried to update the driver by accessing the tab "driver", click on "Update driver", click on "Automatically search for an updated driver", and the result was "the best driver for your device is already installed."

  I found the solution on this hp web page:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07910&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3876397&lang=en#N1074

  Basically, it says NOT to use the function "remove the device safely.  Instead, just right-click on the drive in the Solution Explorer, then choose "Eject".  Works perfectly.

  Some excerpts...
  "Memory card readers are devices that use the icon remove the device safely in the notification area in the taskbar). Do not click stop in the window, remove the device safely. Doing so can disconnect the card memory reader for Windows. In this case, restart the computer to reset the memory card reader. »
  "An alternative to the restart of the computer is to use the option optimize for fast moving functionality in Windows.

• Flight Simulator FS9.cfg file does not accept the changes

  I am running Msft FltSim2004 under Windows 7 Professional. I had to make additions to the FS9.cfg file (it takes changes in txt in Notepad). It is a hidden file located in C:\Users\{my name} \AppData\Roaming\Microsoft\FS9. After that I have to make the changes and close the file, and restart FltSim, I still get the error that the change was supposed to eliminate FltSim. When I check FS9.cfg, the change I've made is no longer there.

  I changed all the c:\ folder permissions down to FS9, as well as the permissions in the FS9.cfg file. But it still does not accept the changes. Everything else works fine under Win7. Any suggestions? Thanks in advance for your help.

  Art

  Art,
  Try to copy the file to your desktop (or another folder), and then delete one located in the FS9 folder.  Make the changes to the copied file and simply save it to the new location.  Reopen the case to check the changes remained, and then copy it in the FS9 folder and test.  Let us know the results.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the Removable Storage Service and Microsoft Fix it 50198

  I updated Windows XP computers in an office from Internet Explorer 7 to Internet Explorer 8.  During the process, the installation gave me security errors.  I resolved to fix these errors by running Microsoft 50198 recommended in troubleshooting Internet Explorer 8.

  The facility has been able to complete, but there is a new problem.  All computers that require this hotfix are now unable to use and USB storage media.  The following error is generated in the event log:

  Event type: error
  Event source: Removable Storage Service
  Event category: no
  Event ID: 111
  Date: 15/03/2011
  Time: 12:48:09
  User: n/a
  Computer: WCML-HNCX5J1
  Description:
  RSM could not load media in drive drive 0 of library SK_USB20 drive Flash USB Device.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 01 00 00 00...

  I am logged in as an administrator and have tried several different USB media with the same results.  I am posting this in the security group as it seems to be linked to security changes made by Microsoft difficulty he 50198.  Other computers that do not need this fix do not have the same problem.

  Thank you for your response.

  I'm working on it, I think I found my problem.  These computers are part of an area in which I do not.  They will be removed from the field in a few weeks as they are separate from this company.  The area has some group policy settings that limit to me logged on as a local administrator.  I think I'll have to wait until computers were removed from the field to solve this problem.

• SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

  Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~

  I use the 32-bit Windows 7.

  There is no solution, it is what it is.  However we should not prevent you to make bootable.  Search here and on Google for RMPrepUSB.  It is a utility that can make the bootable disc.

• Historical files does not recognize the external hard drive

  Original title: the best backup software in addition to the history of files on Windows 8?

  I have a Seagate Free Agent external drive which works fine and I can transfer stuff to him without error, but when I try to use it as my backup for Windows 8 file story... drive it is not recognized. I tried to format it and stuff, but no luck. What backup software I should try instead?

  There are a lot of choices.  You could 'rolling' and just create a scheduled task to run the xcopy command, and copy your files changed, replacing the old backups. However, it's messy.  File history gives historic change-of-change of version of the files in place.

  You can also use a tool like SyncToy to accomplish the same thing as xcopy, but retains the same limitations (no version control).

  I personally just store all my files in OneDrive.  Then they are local on my C: drive, more in the cloud, the more on my other computer, as in my automated backups my external hard drives. I am therefore quite redundant in my backups, even if OneDrive se is not intended as a backup service (but there is no version history / modified files).

  Given the predominance of backup as Carbonite and Norton backup services (best practices than those who are 'off-site' and in the cloud, and so they are safer than local backups), I prefer to recommend these first.  But I'm sure that some other users of the forum have some ideas of good backup software too.

• Where the control to show/hide the removable storage settings

  I try to install Win 8 Prof.  I have a HP desktop with a CD player and 4 slots for removable media devices.

  In a previous installation, there was a way to show/hide the removable drives / slots unless there was inserted media.

  I don't know where the setting.  I tried the

  strategies group without result.

  I also lost the capacity of my office to recognize and attach my CD player.  It appears in Device Manager, but he said he is not physically attached.

  I can boot from the drive.

  Help, please.

  Have you installed Windows 8 or you try to install it?

  I use Windows 7 on my PC and in that, the option "Hide or show empty leads in computer folder" is located in the view tab of the window "Options records". It should be the same in Windows 8 as well.

  Visit this link:

  http://www.SevenForums.com/tutorials/6969-drives-hide-show-empty-drives-computer-folder.html

  If Windows 8 will not detect the device, try the steps in this link:

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

• PDF fill-able file won't save the changes

  Please excuse me if this has been covered before. If so, please point me to the appropriate thread.

  One of our customers with attempted legal service fill in the information on a PDF file that was downloaded from a site in the State. When information is entered into the PDF form and saved, the fields that have been filled to remain blank.

  Downloaded the same form on my computer, do a right click on the selected file unlock to make sure that the economy was not blocked, entered some test info, but no effect.

  The file is here:

  https://www.dropbox.com/s/5bi86ef0om9jkfs/Dr%208548e%20Retail%20Business%20Appl%2012112014 _0.pdf? = 0 dl

  I want to know is if there is a limitation on the question of whether this particular PDF has disabled save filled for PDF of information about this specific case, given the link below and to know for sure.

  Adobe Acrobat X Pro * allow Reader users to save form data

  I appreciate the input.

  I can't seem to shape on dropbox, but keep in mind that Yes, the form must be enabled using Acrobat (at least) but there are too many restrictions on this type of form is not certain that a State agency he would use for a form of general use. To make the recordable form in Reader for more than 500 people requires a very expensive service that can cost about $10K per form. Most agencies have not that kind of budget for this sort of thing.

• Why my flash player installation files won't download the update?

  After downloading the dmg file and runs the installation files download stops at 30%

  I've updated several times before without any problem.

  Same question, same answer: use the http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg Offline Installer

• The TYPE of CFINPUT DATEFIELD = won't accept the date from the data base

  I had a weird problem which I think may be just a way to explain to the server how to interpret value. I use ColdFusion 8 with SQL SERVER 2005 Express. In my table, the field is a DATETIME field and the date with time (eg. 2007-07-23 00:00:00).
  
  In my form, when I added using the DATEFIELD as the CFINPUT type, it records the date correctly. But when I use the EDIT.cfm form and try to put the value of the database in the CFINPUT DATEFIELD, the server generates an error. Here is the error:
  
  2007-07-23 00:00:00 / 0 is an invalid date or time string.
  
  Of course, I tried many things but I tried to force the date with DATEFORMAT format (qGetNewsInfos.dtIssued, "mm/dd/yyyy '") and many other format but without success.
  
  Is he knows how to use a date in the case of a < CFINPUT TYPE = DATEFIELD >?

  Try dateformat yyyy-mm-dd.

• Stand alone HP 8250 printer will not accept the camera 16 GB SD card.

  The message 'card' access error bed. The printer works fine with a card SD 256 MB of the same device. The 16 MB card works fine on my printer HP Photosmart Premium C309. The 8250 has a limitation of size of SD card?

  Hello

  The printer have SD card limits, as the specific model is very old and with previous technologies...

  As you can find it by the specifications, the Maximum size is 1 GB

  Four memory card slots: CF I and II, IBM Micro drive, Secure Digital/MM card, xD-Picture card, Sony Memory Stick, maximum size 1 GB
  

  http://support.HP.com/us-en/document/c00386656

• DM4 memory card reader won't read the Extreme Pro Sandisk SDHC card

  I have a dm4-1201us and the built-in memory card reader will not read my Sandisk 16 GB SDHC Extreme Pro memory card. I can read with an external drive, but prefer to use the internal drive. I think that HP needs to update the memory card driver reade.

  I solved the problem by inserting the memory card into the internal drive. Then I opened the Device Manager and found the drive, which was a mistake on the Bill. I deleted this device and check the 'delete the driver '. I did a restart and now it reads SDHC cards.

• COMPUTER LAPTOP WON'T RECOGNIZE THE WIFI SIGNALS. NETWORK CARD SAYING ERROR 52?

  Hello

  Can someone help me get my laptop to connect with the internet? He ceased to recognize the wffi signals and the wifi adapter sys there is error 52?

  I can connect using a laptop dongle.

  Try to go to the support site of the PC for the manufacturer and the model and the OS you have and download and install the latest compatible drivers on their site.

  Esp if it's wrong?- http://TechNet.Microsoft.com/en-us/library/ff710454%28V=WS.10%29.aspx